Yep, looks like CAPsMAN is broken in v7.11 I have the same issue on a CCR1036-12G-4S. CAPsMAN basically becomes unresponsive and I notice also that the VLAN's on my bridge interface also have no status i.e. no R (Running) status. Generating an export results in this before console crashes, just aga...
Not sure that''s a bug, but a GPON SFP module stays in "sfp-tx-fault=yes" state every time if in ex. I unplug it or disable it for a while, but sometimes after reboot it changes to normal state. Instead of it it runs fine, maybe the reason is that GPON modules needs some time to boot up. [...
Hello, I've little problem with routing I think, this is unusual setup because in normal situation I use different subnet for devices behind VPN, but not in this case. ZT network: 10.44.0.0/24 MT ZT interface IP : 10.44.0.3/24 Remote LAN : 172.30.0.0/21, GW 172.30.0.1 MT IP in remote LAN: 173.30.3.1...
Very strange issue. I've received mine last week (non-poe version) and with 2,5G PON SFP in SFP+ port and PC with multi-gig card I'm able to push above 2Gbit over that device. If you work in ISP NOC (like me) maybe you should try to shape that 1G connection to ex. 300,500Mb and see if it make any di...
Do you have any drops/error on WAN interface? I've also figured that you have disabled hw-offloading on some ports, is this for some reason? /interface bridge port add bridge=bridge comment=defconf hw=no interface=ether2 add bridge=bridge comment=defconf hw=no interface=ether3 add bridge=bridge comm...
I have ac3 and ax3, both on ROS7.7 and wifiwave2( ac3 in diffrent location), Ax3 performance on 5GHz: Client : Xiaomi Mi10T Pro : ~600-700Mb/s, Client : HP Probook 450 G9 with Realtek 8852BE, Ubuntu 22.04 LTS : 800-900Mb/s But I will swap this Realtek card to Intel AX211 because of driver issues on ...
Wifiwawe2 devices can be controlled only by Wifiwawe2 CAPSMan, you can't mix older devices with it for now.
Also, non-wawe2 capsman can't control wave2 devices such as hAP ax3
Thanks for that build. After contacting Mikrotik Support, we have tracked the isssue( thanks Krisjanis!) The issue was filesystem on external USB storage - it was FAT32, I've missed that when formatting disk to use as container storage. After change of filesystem to ext3 container files have been un...
Maybe I'm doing something wrong. After creating package with docker on windows, using links from wiki (not current) for arm architecture and putting it on hAP ac3 it always tells that it's build for amd64 not arm. But unpacking pihole.tar and revieving files reveals that is buld for arm, amd64 is me...
Hello, Nobody tried to install ROS 7.x on CRS125-24G-1S-2HnD, please ? Hello, Does anyone has experience with CRS125-24G-1S-2HnD and RouterOS 7.x ? Do I lose something (in terms of functionnalities - I can rebuild the config if it cannot be imported from backup) if I upgrade from 6.48.4 to 7.1rc3 ?...
Also, on website is written that cAP ac is IPQ-4018 based and has 128MB of RAM, but i've logged onto my AP and it says its IPQ-4019 based and size of memory is 256MB? Winbox shows wrong values? You are one of the lucky. When hAP AC2 (and looks like cAP too) was lauched, Mikrotik had problems with s...
In future, will be a version of wave2 which fits in cAP ac etc? With 16Mb flash it didn't fit, even the new product cAP XL ac has only 16MB and 128MB of ram? Is not mean to have wave2 package? Also, on website is written that cAP ac is IPQ-4018 based and has 128MB of RAM, but i've logged onto my AP ...
On hAP ac^2 if I set "strong-crypto=yes" in IP/SSH/ and try to export config of entire device, it takes a very long time and finally in file is error about SSH and this section is not exported: ...... set api disabled=yes set winbox port=8291 set api-ssl disabled=yes #error exporting /ip/...
On hAP ac^2 if I set "strong-crypto=yes" in IP/SSH/ and try to export config of entire device, it takes a very long time and finally in file is error about SSH and this section is not exported: ...... set api disabled=yes set winbox port=8291 set api-ssl disabled=yes #error exporting /ip/s...
It's a good question, I've planned to replace my home RB450Gx4 with 4011, now I will wait for 5009. Anyway, for home/test router both 4011 and 5009 propably will be enough. Also, test results for RB4011 in video has diffrent values compared to test on their page. And in video RB5009 is compared to R...
I've Winbox 3.27 on Wine (ubuntu) and I can't log in to any device after upgrading them to 6.47.3. It stays at "Logging in" and nothing is happening. Of course, devices are accessible by in.ex. SSH but winbox is missing. From windows I still can log in. Trying older winbox didn't work. Str...
Hello, I've recently purhased NetPower 16P for powering sereval APs, and configured it to use switch-chip with VLANs, ROS version is 6.45.9. I've configured sereval VLANs and other things, but I've problem to set up one thing, L2 ACL filtering. Device has sereval VLAN configured, but i want to filte...
NetPower 16P, upgraded to v6.47. In switch menu, switch type is shown as "unknown". Also is impossible to activate bridge hw-offload in any scenario, with or without VLANs, it always uses CPU. Installed version 6.45.9 and hw-offloading works, also in switch menu switch type is shown correc...
Hi, After upgrade, on hAP ac2 and cAP ac I see strange channel options, XXX :) In CLI: [admin@KowalCAP] > /int wire set 1 channel-width= ChannelWidth ::= 10mhz | 20/40/80/160mhz-Ceeeeeee | 20/40/80/160mhz-XXXXXXXX | 20/40/80/160mhz-eCeeeeee | 20/40/80/160mhz-eeCeeeee | ... [admin@KowalCAP] > /int wi...
I've remotely upgraded my home 951G-2HnD from 6.17 to 6.18 and after reboot I can't ping anything, mac address and vlans were disappeared from my home switch but link is up - after work I will check what's wrong, CCR-1009-1S-1S+ was been successfully updated without problems...