Hello, I am using Rb3011 as a hotpspot device with builtin usermanager. My user manager is programmed for only users with id and password. With usermanager I can create different profiles with different speed limitations and upload/download limit. but I want to block Youtube access for some users. I...

Hello @mikrotik_com and All We need to upgrade our P2MP links to AC. Which and how many APs need to install at Point-T. Point-E is 2km far and Point-C is 2.5km. Currently Rb433 are used in all locations. Point-A to Point-T will be trunk route. and Point T will be used for base transmitter Point B,C,...

Hi Thanks for reply: Please find the configuration for IP and Firewall. The Client IP 10.38.7.19 need to exclude all filters/firewall and need to map to WAN ip - 10.38.0.76 and lan network 10.38.6.0/23 will src-nat to 10.38.0.10 I have created 2 entries in ip-nat field and 2 - entries in ip-filter f...

Hi, I am using ( https://wiki.mikrotik.com/wiki/Force_users_to_use_specified_DNS_server) for redirecting all Clients to forcefully use DNS 208.67.222.222 · 208.67.220.220 But I want to exclude one Client to use google dns 8.8.8.8 I have created src nat rule and filter rule (jump) ; placed at 1st pos...

@mistry7 Thanks for reply: Yes old RB433AH was having L5 and this one L4 but as per Mikrotik wiki: Level 4 has 200-hotspot active users and 20-user manager sessions. I was thinking 20-user manager sessions means number of admin logins(customer) in user manager. I was planning to buy RB3011UiAS-RM or...

Last week my RB433AH cashed during upgrading RouterOS Therafter I installed new RB433UL with OS 6.43.4 All features are working only issue is in Usermanager active Sessions showing only for maximum upto 19 entries although total number of sessions are much higher, Check the screenshot for Usermanage...

We are running Hotspot on Mikrotik router with Usermanager service. I have given 1 user id for each user. they can use only for 1 device. But when user is trying to login in 2nd device, its showing " Simultaneous session reached ", In this webpage I want to have feature where user can forced logout ...

My RB800 is not booting up from Cisco 3560 POE Switch. RB800 is installed in mobile tower, power/data supply for Cat6 STP cable of 30 mtr. After every Power Trip, router is not starting up automatically. We need to go to Tower and manually restart the Rputer. After one or two restarts, it working fi...

Hello I have one p2p link of 1km good line of sight configures 5Ghz N, 20/40 Mhz HT Above, TCQ=94% Signal level 65/63 with speed approx 135 mbps/65mbps but ping response is not very stable, when we ping any network device sometimes it gives 1000ms ping response for few minutes. what could be the iss...

Thankyou for the correct answer.

One more query.
We are using Mikrotik wireless for VOIP calling like Skype and others
what should be the best configuration of Mikrotik to support voip traffic, configuration like preamble key

Please reply up to the point only

Thankyou for all suggestions

but no body answered by actual query

what should be the height of Omni Antenna above the house roof


Regards,

laptop users are just 10 meter to 300 meter from Omni antenna, and they are getting the signals


I just want to know what should be the idle height of the Omni Antenna from the roof of the house.

Dear All,

yes 300 meter from Antenna, and its outdoor.
Antennas are at 5 meter from ground.
Is the height ok, or we need to bring down the height to more lower.

we have configured RB433 as access point (ap-bridge) with 12dbi Omni antenna what should be the configuration to get maximum output from the radio and antennas for a coverage of 300 meters. we have setup channel width to 20/40 Mhz HT above, is it correct for laptop and mobile use, my users are compl...

I have used Mikrotik hotspot, there we have to configure username/password for each user
my requirement is one common password for all users

I want to create open wifi in my office with web based authentication (captive portal) for every users.
One password for all with time period.

Is there any Mikrotik product like RB750 or RB951 with this feature

Dear All,

Whether RB951-2n and RB951Ui-2HnD will support Hotspot features

I know that 5Ghz is best option, but I need to utilize my spare 2.4Ghz Grid Antennas.
In case of 5Ghz link, I have to procure new antennas,

In that case, shall I use 2.4Ghz for my new p2p link as I want to use the existing infrastructure.

distance of the p2p links are 1 km and 2 km

PLEASE TELL WHICH ONE IS BETTER

We are using four RB433 with dual Omni Anteena, configured in Mesh WDS, but we are not getting the good performance. We decided to change all RB433 either with GrooveA 52HPN or Ubiquiti BulletM2 with 12dbi Omni Anteena, Please tell which product is better and should give better performance Regards,

It is not dual band, Its 2.4Ghz Grid Anteena,

we want to use it for 5 Ghz p2p link

Hello,
I was using RB433 with 2.4Ghz Grid antenna, now I have to use the same hardware in other location as p2p in 5Ghz,
Can I use same 2.4Ghz Antenna with RB433, for point to point 5Ghz link

Regards,