Community discussions

Search found 74 matches

by zakynthoswifi
Sun Nov 10, 2019 3:53 pm
Forum: Beginner Basics
Topic: VPN BYPASS ISP NAT
Replies: 1
Views: 213

Re: VPN BYPASS ISP NAT

You have to configure one SSTP server in your cloud CHR (or you can buy one routerboard and configure it to your home as SSTP server) with static ip address or ddns service, then you can simply create on each mikrotik site one sstp client pointing to your sstp server and boom! just configure static ...
by zakynthoswifi
Sun Nov 10, 2019 3:15 pm
Forum: Beginner Basics
Topic: PPPoE for 1Gbps clients
Replies: 2
Views: 437

Re: PPPoE for 1Gbps clients

Try to change your mtu values.
For this type of clients personally I don't connect them via pppoe but with static ip address given via my radius server to limit each one of them and for expiration purposes.
by zakynthoswifi
Sun Nov 10, 2019 10:11 am
Forum: Beginner Basics
Topic: block specific page on the site, but not whole site
Replies: 3
Views: 412

Re: block specific page on the site, but not whole site

maybe with proxy you can do that...
by zakynthoswifi
Sun Nov 10, 2019 10:05 am
Forum: Beginner Basics
Topic: MikroTik and LAN on second router
Replies: 20
Views: 1603

Re: MikroTik and LAN on second router

Hm...
If i catched this correct... all you need to do is add a static route on mikrotik for R1 network.
/ip route
add check-gateway=ping distance=1 dst-address=192.168.1.0/24 gateway=192.168.2.1
Remember to configure firewall of edgerouter to accept connections from wan interface
by zakynthoswifi
Fri Nov 01, 2019 12:07 pm
Forum: General
Topic: Remote syslog [SOLVED]
Replies: 5
Views: 574

Re: Remote syslog [SOLVED]

Chris you're right I removed the "LAN MASQUERADE" rule and everything worked ! The lan address-list was specifying all of my lan subnets, without this i couldn't access any of my other lan subbnets i.e. from 192.168.88.0/22 to 10.100.10.0/24 was unreachable. I dont know what changed now but without ...
by zakynthoswifi
Fri Nov 01, 2019 11:06 am
Forum: General
Topic: Remote syslog [SOLVED]
Replies: 5
Views: 574

Re: Remote syslog [SOLVED]

/ip firewall nat add action=masquerade chain=srcnat out-interface=ether0 add action=masquerade chain=srcnat out-interface=ether1 add action=masquerade chain=srcnat out-interface="VLAN WAN CONN 3" add action=masquerade chain=srcnat comment="Lan Masquerade" src-address-list=lan I have address list to...
by zakynthoswifi
Thu Oct 31, 2019 12:22 pm
Forum: General
Topic: Remote syslog [SOLVED]
Replies: 5
Views: 574

Re: Remote syslog [SOLVED]

Yes my masquerade is very loose I know that...
I’ll post an export later this day. Thank you
by zakynthoswifi
Thu Oct 31, 2019 9:40 am
Forum: General
Topic: Remote syslog [SOLVED]
Replies: 5
Views: 574

Remote syslog [SOLVED]

Hello , I’m using librenms for snmp and syslogging of my devices. As always 😕 I’m experiencing a strange problem . Let me write my topology... My core router up is 10.100.10.1 One of my client’s up is 10.100.10.6 And all of my clients are connected via pppoe When I enable on my client’s side remote ...
by zakynthoswifi
Sat Oct 26, 2019 4:51 pm
Forum: General
Topic: Suspicious DNS cache entries [SOLVED]
Replies: 2
Views: 591

Suspicious DNS cache entries [SOLVED]

Hello,
after some research i can see some suspicious DNS entries, are they normal?
mtkdns.jpg
by zakynthoswifi
Sun Oct 20, 2019 1:11 am
Forum: RouterBOARD hardware
Topic: RB1100x4
Replies: 5
Views: 724

Re: RB1100x4

OK!
Does anyone knows a box that can do the job?
by zakynthoswifi
Sun Oct 20, 2019 12:41 am
Forum: RouterBOARD hardware
Topic: RB1100x4
Replies: 5
Views: 724

RB1100x4

Hello, Is possible to conver onboard serial port to alarm input and have email notification? I'd like to have alarm supervision for door open, water flood, fire alarm,AC power outage,Low battery etc on my remote cabinets. I'm running a wisp service but without luck on remote supervision of my cabine...
by zakynthoswifi
Tue Oct 15, 2019 12:41 am
Forum: Announcements
Topic: v6.45.6 [stable] is released!
Replies: 59
Views: 27562

Re: v6.45.6 [stable] is released!

contact support, system failure, please send supout file to mikrotik support.
Have you done that already?
Yes I’ve done it already
by zakynthoswifi
Mon Oct 14, 2019 9:05 pm
Forum: Announcements
Topic: v6.45.6 [stable] is released!
Replies: 59
Views: 27562

Re: v6.45.6 [stable] is released!

Router: CCR1009 Problems: PPPoE server running on router, after 7 days uptime start's to loose clients (disconnection messages and full breakdown) OSPF from full to down and after 5 minutes it come's back to full. SNMP over Librenms Sensor under limit for FAN rpm's (it goes to 0 from7500 rpm) I saw ...
by zakynthoswifi
Mon Sep 30, 2019 3:32 pm
Forum: Beginner Basics
Topic: Redirecting after connecting to the WiFi..
Replies: 13
Views: 1588

Re: Redirecting after connecting to the WiFi..

im getting this /ip dhcp-server network print Flags: D - dynamic # ADDRESS GATEWAY DNS-SERVER WINS-SERVER DO.. 0 ;;; defconf 10.10.3.0/24 10.10.3.1 1 ;;; hotspot network 10.10.4.0/24 10.10.4.1 note:the subnet 10.10.4.0 is the hotspot Ok under this menu add the missing dns-server value with 10.10.4....
by zakynthoswifi
Sun Sep 29, 2019 2:04 pm
Forum: Beginner Basics
Topic: Redirecting after connecting to the WiFi..
Replies: 13
Views: 1588

Re: Redirecting after connecting to the WiFi..

please open terminal and type
/ip dhcp-server network print
and give us the output here
by zakynthoswifi
Sun Sep 29, 2019 1:51 pm
Forum: Wireless Networking
Topic: 921GS-5HPacD r2 Superchanel [SOLVED]
Replies: 1
Views: 370

921GS-5HPacD r2 Superchanel [SOLVED]

Hello,
Does anyone has a success story for superchannel on most country restricted channels?
I'd like to try 5.4 GHz but is not working ... I'm setting everything correct but no luck.
My station is sxt lite5 and my test country is bermuda
by zakynthoswifi
Sun Sep 29, 2019 12:08 am
Forum: Beginner Basics
Topic: Redirecting after connecting to the WiFi..
Replies: 13
Views: 1588

Re: Redirecting after connecting to the WiFi..

No,
under the section i told you only.
DNS under hotspot is to give to your hotspot a unique dns domain name (landing.myfasths.gr)
by zakynthoswifi
Sat Sep 28, 2019 5:52 pm
Forum: Beginner Basics
Topic: Redirecting after connecting to the WiFi..
Replies: 13
Views: 1588

Re: Redirecting after connecting to the WiFi..

Under ip>dhcp server>networks did you specified dns servers?
For me that was the problem for some devices
by zakynthoswifi
Sat Sep 28, 2019 5:48 pm
Forum: Beginner Basics
Topic: Traffic Forwarding from LAN1 to LAN2 via vpn
Replies: 2
Views: 415

Re: Traffic Forwarding from LAN1 to LAN2 via vpn

It seems you have default route over vpn. Disable it and you will be fine
by zakynthoswifi
Sat Sep 28, 2019 5:46 pm
Forum: Beginner Basics
Topic: bandwidth per ip not working... [SOLVED]
Replies: 1
Views: 342

Re: bandwidth per ip not working... [SOLVED]

disable fasttrack
by zakynthoswifi
Thu Sep 26, 2019 1:09 am
Forum: Beginner Basics
Topic: WAN's seem happy, but no Internet Access
Replies: 2
Views: 413

Re: WAN's seem happy, but no Internet Access

Did you set up NAT correctly?
by zakynthoswifi
Wed Sep 25, 2019 10:17 pm
Forum: General
Topic: Forwarding to login page of Hotspot
Replies: 13
Views: 813

Re: Forwarding to login page of Hotspot

Although am not sure, inside your dhcp server network add under DNS your hotspot address 192.168.87.1 so your client gets a DNS... Bingo! Zacharia you are right, If you don't specify DNS on your dhcp server you wont be able to open hotspot landing page automaticaly, in most devices will open but so...
by zakynthoswifi
Wed Sep 25, 2019 4:48 pm
Forum: Beginner Basics
Topic: Help with traffic flow -UNMS
Replies: 2
Views: 384

Re: Help with traffic flow -UNMS

The problem is that unms (locks) your first wan ip address and then when your wan ip changes you need to remove the rsa key from each ubiquiti device and make reconnect. I advice you to make a vpn tunnel from your vps to your mikrotik router, after that you need to change on every ubiquiti device in...
by zakynthoswifi
Wed Sep 25, 2019 3:54 pm
Forum: Beginner Basics
Topic: VPN between two routers
Replies: 8
Views: 788

Re: VPN between two routers

try to masquerade all your lan ip addresses.
did you have configured your routes correctly?
by zakynthoswifi
Wed Sep 25, 2019 3:50 pm
Forum: RouterOS v7 BETA
Topic: Torrent client
Replies: 40
Views: 7581

Re: Torrent client

+1 Please remove torrent support, is the only reason to turn back on cisco routers...
by zakynthoswifi
Wed Sep 25, 2019 3:32 pm
Forum: General
Topic: Forwarding to login page of Hotspot
Replies: 13
Views: 813

Re: Forwarding to login page of Hotspot

try removing dns name of your hotspot.
by zakynthoswifi
Tue Sep 24, 2019 12:30 pm
Forum: Wireless Networking
Topic: NV3
Replies: 125
Views: 14897

Re: NV3

please attach your wireless config here and answer all of my questions above in order to help you
by zakynthoswifi
Tue Sep 24, 2019 11:46 am
Forum: Wireless Networking
Topic: NV3
Replies: 125
Views: 14897

Re: NV3

give me an example of configuration with mantbox19s ac without loss of packages with new Normis protocols please. Since I have 20 mhz free there are many interferences. You said (i think) that you are deployed an ptp link, so WHY you are using mantbox 19 ? Is a sector antenna that covers 120 deg. p...
by zakynthoswifi
Tue Sep 24, 2019 11:37 am
Forum: General
Topic: (pptp-client) in a mikrotik behind another gateway mikrotik .. is that possible?
Replies: 10
Views: 1000

Re: (pptp-client) in a mikrotik behind another gateway mikrotik .. is that possible?

Please DO NOT use pptp. Is very unsafe protocol. Personally I was getting a very big ammount of fake connections per day from random attackers.
Instead use SSTP!
by zakynthoswifi
Tue Sep 24, 2019 11:24 am
Forum: General
Topic: my story about rb2011uias
Replies: 6
Views: 943

Re: my story about rb2011uias

please post a photo of your sfp
by zakynthoswifi
Mon Sep 23, 2019 4:59 pm
Forum: Announcements
Topic: Photos of towers and masts
Replies: 59
Views: 17124

Re: Photos of towers and masts

My WISP network. (under construction cable managers filled patch panel)
IMG_2718.jpg
by zakynthoswifi
Thu Aug 22, 2019 10:37 am
Forum: General
Topic: Tapatalk
Replies: 4
Views: 599

Re: Tapatalk

No the problem is still there
by zakynthoswifi
Wed Aug 21, 2019 1:17 pm
Forum: General
Topic: Tapatalk
Replies: 4
Views: 599

Tapatalk

Hello
I don’t know where to write my problem .
Please arrange a fix for tapatalk MySQL error .
Is not tapatalk’s fault
by zakynthoswifi
Thu Aug 08, 2019 4:29 pm
Forum: General
Topic: Strange Network Loop
Replies: 2
Views: 416

Strange Network Loop

Hello, today here in zakynthos we had an power outage and after that one of my customers routerboard gets this error. if the port is damaged by a thunder is this a normal error or something else is happening? I was getting this error again in the past but with a reboot os pord disabling and re-enabl...
by zakynthoswifi
Wed Feb 20, 2019 5:50 pm
Forum: General
Topic: Problem with DHCP Mikrotik RB962UIGS-5HACT2HNT
Replies: 11
Views: 641

Re: Problem with DHCP Mikrotik RB962UIGS-5HACT2HNT

try to disable your firewall drop rules and keep an eye on it it must be fine...
by zakynthoswifi
Sat Jan 12, 2019 11:56 pm
Forum: Wireless Networking
Topic: Mikrotik WISPs: Where?
Replies: 96
Views: 48691

Re: Mikrotik WISPs: Where?

I'm a WISP in Zakynthos island
www.zakynthoswifi.net
by zakynthoswifi
Wed Jan 02, 2019 12:51 am
Forum: General
Topic: radius server not responding
Replies: 1
Views: 408

Re: radius server not responding

when i disable user-manager from packages the radius started counting bad replys from my other (new) radius not timeouts as was before disable the user manager
by zakynthoswifi
Wed Dec 26, 2018 5:07 pm
Forum: General
Topic: Help choosing a router
Replies: 4
Views: 396

Re: Help choosing a router

Hi Merry Xmas,
I can suggest you the RB3011 or RB1100AHx4. Both of them are powerfull enough for your job!
by zakynthoswifi
Wed Dec 26, 2018 5:05 pm
Forum: General
Topic: radius server not responding
Replies: 1
Views: 408

radius server not responding

Hello and merry chrismas I have a RB1100AHx2 with radius manager and loadbalancing over 4 wan. The problem is that now i have another radius manager (not usermanager but dma) to another network connected via vpn (i have set the route and other parameter on the vpn client side rb1100ahx2) and after a...
by zakynthoswifi
Wed Dec 19, 2018 5:54 pm
Forum: General
Topic: Flash SWoS for RoS
Replies: 0
Views: 272

Flash SWoS for RoS

I have CSS326-24G-2S+RM with Switch os , I also have a L5 licence for Ros can i netinstall ros on this switch?
by zakynthoswifi
Wed Dec 19, 2018 12:13 pm
Forum: General
Topic: PPPoE on switch that is not the router
Replies: 1
Views: 227

Re: PPPoE on switch that is not the router

upload here your config to help you
by zakynthoswifi
Wed Dec 19, 2018 1:48 am
Forum: General
Topic: CRS112 Total Current Limit
Replies: 0
Views: 230

CRS112 Total Current Limit

I read in the specs that the total current flow is 2.8A@24V and 1.4A@48-57V. This limit is because the included power supply can't provide more amps, or is hardware limit? If i Connect an 10Amp 24v power supply, will this make the total current limit value higher? I want to connect 4 PoE devices tha...
by zakynthoswifi
Fri Dec 14, 2018 5:27 pm
Forum: General
Topic: ccr1009 speedtest resoults
Replies: 3
Views: 495

ccr1009 speedtest resoults

Hi, i'm running a speedtest on loopback address and the resoult is this ccr1009 speedtest.png Is this resoult correct? also if i run a speedtest from a rb3011 with fiber uplink connected directly to ccr over 1G sfp i'm getting 459,32 Mbps max (one direction) if i setect both directions then i get 30...
by zakynthoswifi
Fri Dec 07, 2018 12:37 am
Forum: General
Topic: CRS112 12v? [SOLVED]
Replies: 1
Views: 278

CRS112 12v? [SOLVED]

Hi,
Is possible for this PoE switch to work with 12v? I don't mind if the connected poe equipment is powered with 12v
by zakynthoswifi
Wed Dec 05, 2018 4:28 pm
Forum: The Dude
Topic: upgrade is not working
Replies: 2
Views: 701

upgrade is not working

Hello,
Anyone who has the same problem? I can't mass-upgrade RoS from dude...
by zakynthoswifi
Tue Nov 27, 2018 8:46 pm
Forum: General
Topic: What ISP software are people using?
Replies: 6
Views: 1420

Re: What ISP software are people using?

check the dma radius manager www.dmasoftlab.com
by zakynthoswifi
Sun Nov 25, 2018 12:51 am
Forum: General
Topic: Public-Mikrotik-Bandwidth-Test-Server(s)
Replies: 579
Views: 429856

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

Hi tom,
I'm getting after a speedtest on your server several incoming attempts from port scans from your ip. please check your router... currently I have blocked your ip. Thanks for this server
by zakynthoswifi
Thu Oct 25, 2018 9:49 pm
Forum: General
Topic: Problem with l2tp and pppoe server on both ends
Replies: 0
Views: 291

Problem with l2tp and pppoe server on both ends

Hello, recently i've conected one remote location of my wisp company with my core network via l2tp. The problem is that when vpn is connected everything blocks, my network became transparent on both ends i can see all of the devices, of the remote location on my core location from winbox neighbours,...
by zakynthoswifi
Sat Aug 11, 2018 12:29 pm
Forum: General
Topic: 6.42.3 Hotspot issue on CCr1009
Replies: 4
Views: 827

Re: 6.42.3 Hotspot issue on CCr1009

is there any plan on when the problem will be solved ?
by zakynthoswifi
Fri May 25, 2018 2:36 am
Forum: General
Topic: Dynamic queue isn’t working
Replies: 1
Views: 294

Dynamic queue isn’t working

Good morning I have radius manager with dynamic bandwidth allocation per pppoe user but is not working... I’ve attached a picture of the problem... https://www.dropbox.com/s/rt1lu7n6rn4sqrk/33428427_10204331068073425_3085700089667125248_n.jpg?dl=0 https://www.dropbox.com/s/rt1lu7n6rn4sqrk/33428427_1...
by zakynthoswifi
Thu Mar 08, 2018 1:05 am
Forum: Beginner Basics
Topic: DVR Forwarding
Replies: 15
Views: 1845

Re: DVR Forwarding

Ok please use my code and change the WAN1 name with your pppoe client name e.g. pppoe-out1 .
It should work ...
by zakynthoswifi
Wed Mar 07, 2018 4:17 pm
Forum: Beginner Basics
Topic: DVR Forwarding
Replies: 15
Views: 1845

Re: DVR Forwarding

can you write how your MT has internet? pppoe,dhcp,static ip?
by zakynthoswifi
Tue Mar 06, 2018 8:05 pm
Forum: Beginner Basics
Topic: DVR Forwarding
Replies: 15
Views: 1845

Re: DVR Forwarding

Hello, By default MikroTik has Firewall enabled that block's all traffic initiated from wan side except dst-natted rules. Please try this port forward rule: /ip firewall nat add action=dst-nat chain=dstnat comment=port forward dst-port=8888 in-interface=WAN1 protocol=tcp to-addresses=10.155.15.2 to-...
by zakynthoswifi
Tue Dec 19, 2017 12:09 pm
Forum: General
Topic: VPN only for radius
Replies: 8
Views: 552

Re: VPN only for radius

| SOLVED |
by zakynthoswifi
Sun Dec 17, 2017 11:26 pm
Forum: General
Topic: VPN only for radius
Replies: 8
Views: 552

Re: VPN only for radius

After you have removed the default, you should add a route to the subnet where your RADIUS server is, via the PPTP VPN.
I'm trying to add route but no luck... can you help me?
by zakynthoswifi
Sun Dec 17, 2017 6:20 pm
Forum: General
Topic: VPN only for radius
Replies: 8
Views: 552

Re: VPN only for radius

#UPDATE#
I can ping the radius server only if I specify the vpn interface under ping tool /ping 192.168.90.119 interface=VPN
by zakynthoswifi
Sun Dec 17, 2017 5:17 pm
Forum: General
Topic: VPN only for radius
Replies: 8
Views: 552

Re: VPN only for radius

What is your VPN solution and how is it configured? Try to remove any "set default route to this VPN" option. my vpn is pptp if i remove add default route i can ping the gateway of vpn server but no the dma radius manager (192.168.90.119) it returns timeout, the same happens if i try to ping a host...
by zakynthoswifi
Sun Dec 17, 2017 5:04 pm
Forum: General
Topic: VPN only for radius
Replies: 8
Views: 552

Re: VPN only for radius

This is my network topology. I have a simple pptp vpn
by zakynthoswifi
Sun Dec 17, 2017 2:36 am
Forum: General
Topic: VPN only for radius
Replies: 8
Views: 552

VPN only for radius

Hello, I'm looking for a solution to authenticate hotspot users via a DMA radius. I don't have static IP so i need a "tunnel", I can't make my ip static due to provider limits... so I configured a vpn but i want only the traffic for radius to pass through this tunnel the normal traffic passes from t...
by zakynthoswifi
Wed Sep 20, 2017 10:14 pm
Forum: Beginner Basics
Topic: Block hikvision cloud
Replies: 3
Views: 729

Re: Block hikvision cloud

Sorry I wrote in wrong section , may a moderator could move the thread?
by zakynthoswifi
Wed Sep 20, 2017 10:12 pm
Forum: Beginner Basics
Topic: Block hikvision cloud
Replies: 3
Views: 729

Block hikvision cloud

Hello
Do you know a way to block the bio connect cloud service into my network? It consumes a lot of bandwidth
by zakynthoswifi
Mon May 01, 2017 1:04 am
Forum: Announcements
Topic: v6.39 [current]
Replies: 89
Views: 34314

Re: v6.39 [current]

Please make the 10sec keep alive timeout from pppoe unselectable
by zakynthoswifi
Sun Aug 21, 2016 11:59 am
Forum: Wireless Networking
Topic: SOS mikrotik dhcp?
Replies: 0
Views: 300

SOS mikrotik dhcp?

Hello , I have a serious problem with my mikrotik and a nanobridge ubiquiti antenna. One day my nano br refuse to give ip and it wasn't responding to ping requests. When i change ssid it worked for 2 days and right now nothing. The most strange thing is that if i connect my eth from antenna directly...
by zakynthoswifi
Sat Aug 20, 2016 10:06 pm
Forum: General
Topic: SOS mikrotik not give ip
Replies: 0
Views: 294

SOS mikrotik not give ip

Hello , I have a serious problem with my mikrotik and a nanobridge ubiquiti antenna. One day my nano br refuse to give ip and it wasn't responding to ping requests. When i change ssid it worked for 2 days and right now nothing. The most strange thing is that if i connect my eth from antenna directly...
by zakynthoswifi
Sun Jun 12, 2016 6:13 pm
Forum: General
Topic: mikrotik and dma rad man.
Replies: 0
Views: 571

mikrotik and dma rad man.

Hello!, After a lot of tries i wanth your help on how to configure the dma to send emails with external smtp. if you can help me writing some commands and their definition e.g. ('smtp_relay', 'localhost'); here you will write your smtp server ip... (just example) my settings are the following:  smtp...
by zakynthoswifi
Tue Apr 05, 2016 4:29 pm
Forum: General
Topic: how to tunel
Replies: 5
Views: 763

Re: how to tunel

Look ,
My RB2011 is my main router with local ip 192.168.88.1/22.
I want to connect the red router with the main brown router but the red router is connected via pppoe to the middle router!!! Please help me! :(
by zakynthoswifi
Sun Apr 03, 2016 11:42 pm
Forum: General
Topic: how to tunel
Replies: 5
Views: 763

Re: how to tunel

witch of these three methods is the correct to use? please be more specific
by zakynthoswifi
Wed Mar 30, 2016 6:40 pm
Forum: General
Topic: how to tunel
Replies: 5
Views: 763

how to tunel

Hello ,
I want to find a suitable protocol to connect directly the brown router with the red router because i use radiusmanager and each router must have it's unique ip.
by zakynthoswifi
Fri Nov 13, 2015 11:28 am
Forum: Scripting
Topic: opendns
Replies: 2
Views: 1058

opendns

Good morning from zakynthos!


Is there any script that updates my dynamic ip on opendns ?
by zakynthoswifi
Tue Jun 16, 2015 5:44 pm
Forum: General
Topic: Mikrotik Hotspot Manager [beta]
Replies: 44
Views: 23514

Re: Mikrotik Hotspot Manager [beta]

The link isn't working :? :?
by zakynthoswifi
Wed Mar 11, 2015 10:25 pm
Forum: Wireless Networking
Topic: mikrotik hotspot see the mac address of sxt and not the mac of the client's mobile or laptop
Replies: 5
Views: 1238

Re: mikrotik hotspot see the mac address of sxt and not the mac of the client's mobile or laptop

wds is enabled on bullet but is not enabled on sxt and i don't know how to enable it! Can you help me?
by zakynthoswifi
Tue Mar 10, 2015 10:57 pm
Forum: Wireless Networking
Topic: mikrotik hotspot see the mac address of sxt and not the mac of the client's mobile or laptop
Replies: 5
Views: 1238

mikrotik hotspot see the mac address of sxt and not the mac of the client's mobile or laptop

mikrotik hotspot see the mac address of sxt and not the mac of the client's mobile or laptop
my network topology is:
1Mikrotik router 2011=>ubiquity airgrid m2 (ap)=>airgrid m2 (station)=>bullet2 (ap)=> [MIKROTIK SXT LITTE 2 (station)
please help me
by zakynthoswifi
Thu Jul 17, 2014 1:40 am
Forum: General
Topic: help with dhcp pool is full
Replies: 1
Views: 663

help with dhcp pool is full

Hello i want your help i have a rb 2011 uias-in for hotspot and main gateway and i have 567 costumers but when 254 users are in the pool hasn't any free adresses to give to the 255'costumer and the 255 costumer can't surf to the net My configuration Ip address:192.168.88.1 Dhcp pool :192.168.88.7~19...