Yes I solved the problem. When you upgrade CAPsMAN and all of CAPs then you should enable wireless-cm2 package by command: /system package enable wireless-cm2 or In Winbox open System Packages menu and select the wireless-cm2 and click Enable. And then you need to do a System Reboot command. All dev...

Found problem. Needed to set correct MTU value on my router.

Hi everybody. I have some small network as described here: http://forum.mikrotik.com/viewtopic.php?p=498740#p498740 It works almost fine except one thing. Internet connection is really poor. People with Android phones complaining that cannot connect to Google Play, Viber is working/not working and S...

Yes. I am aware of that. I did equalize all 5 devices with same OS version and CM version2. I did tried radio provisioning but no luck either. I am running out of ideas now.

I changed address interface to vlan10br but still no luck. I don't get it. Only thing I can imagine that could be problem is that those 2 devices were configured to work before I bought another 3 (RB750 and 2 RB951). They had 6.1 version and it was CAPsMAN v2 on them installed. Then I configured new...

Yes I did. I just upgraded RouterOS to 6.32.1 version. Downloaded file wireless-cm2-6.32.1-mipsbe.npk and installed on all 5 devices. Same result. Right now I configured those two problematic devices to work separately (one as CAPsMAN and other as CAP) with same config and SSIDs but that is not perm...

I have one RB750GL and four RB951G-2HnD devices. RB750GL is CAPsMAN and other 4 devices should be CAPs. All four devices are upgraded to 6.31 version of RouterOS. All 4 CAPs are connected to CAPsMAN and 2 of them are working as it should (CAPRoom1 and CAPRoom2) but other two refuses to retrieve WiFi...

That was problem. I need to create vlan trunk on every interface connected in this topology and to assign every cap interface to appropriate vlan bridge.

I set one pair of RB 951G-2HnD in production but I have a bunch of issues here. Here is my log: 17:38:57 caps,info 84:63:D6:98:85:0C@cap3 disconnected, extensive data loss 17:38:58 caps,info 00:BB:3A:F6:70:02@cap6 disconnected, 4-way handshake timeout 17:39:06 caps,info 00:BB:3A:F6:70:02@cap6 connec...

No one has an idea?

I read these topics before starting to do some configurations. http://forum.mikrotik.com/viewtopic.php?t=92814 http://forum.mikrotik.com/viewtopic.php?t=88346 http://forum.mikrotik.com/viewtopic.php?t=84702 http://forum.mikrotik.com/viewtopic.php?t=85180 Also read manual but still cannot achieve wha...

I managed to make DMZ to work. It was service on server malfunctioned. Now I have only to setup VPN on device itself rather than to forward PPTP through NAT. EDIT: Changed firewall rule and removed destination address of input chain and everything works fine. At friday I will get an ADSL link. Hope ...

I tried different approach but it is not working. I just don get it how to open required ports for DMZ. I created PPTP server behind NAT and it is working but still cannot create VPN server on router itself. It is driving me crazy. Must be something trivial but I just cannot see it.

Hi everybody, I finally got one of those pieces in my hand. Company I work for bought Mikrotik RB2011UiAS-2HnD model. I never configure MT before (I always did CISCO) but tried to do it now. I managed to set up WiFi, dual WAN interfaces, NAT and DMZ. Also configured two WLANs one for internal use an...