Community discussions

MUM Europe 2020

Search found 74 matches

by lpt2007
Fri Nov 01, 2019 2:50 pm
Forum: General
Topic: slow wifi speed mikrotik RB941-2nD
Replies: 11
Views: 976

Re: slow wifi speed mikrotik RB941-2nD

Did you set channel width to 40 ?
I don't have only 40?

I have those 20/40 eC / 20/40 Ce / 20/40 XX.
by lpt2007
Fri Nov 01, 2019 1:58 pm
Forum: General
Topic: slow wifi speed mikrotik RB941-2nD
Replies: 11
Views: 976

Re: slow wifi speed mikrotik RB941-2nD

This is Europe with allowed channels 1-13. So (almost) non-overlapping G/N channels are 1, 5, 9 and 13 (B chanels are actually slightly wider than G/N channels).

Indeed channel 7 (2442MHz) is not one of these either ...
Thanks. I changed to 2437Mhz, no difference speed still max 50/50.
by lpt2007
Fri Nov 01, 2019 1:53 pm
Forum: General
Topic: slow wifi speed mikrotik RB941-2nD
Replies: 11
Views: 976

Re: slow wifi speed mikrotik RB941-2nD

Also change Antenna Gain from 4 to 2 on that device
Thanks. I change gain from 4 to 2, but I don't see difference.
by lpt2007
Thu Oct 31, 2019 12:23 pm
Forum: General
Topic: slow wifi speed mikrotik RB941-2nD
Replies: 11
Views: 976

Re: slow wifi speed mikrotik RB941-2nD

You may want to change Band to "2GHz-G/N". And in security profiles use only "WPA2" and "aes ccm" (tkip limits throughput).
Thanks.

I added those settings. Now is little bit better but still not perfect. 50/50
Can I do something more?
by lpt2007
Thu Oct 31, 2019 12:00 pm
Forum: General
Topic: slow wifi speed mikrotik RB941-2nD
Replies: 11
Views: 976

Re: slow wifi speed mikrotik RB941-2nD

With this settings is better but not like on ISP router wifi:

40/40

viewtopic.php?t=118658
by lpt2007
Thu Oct 31, 2019 11:39 am
Forum: Wireless Networking
Topic: Wi-Fi speed issues on hAP AC Lite
Replies: 38
Views: 19578

Re: Wi-Fi speed issues on hAP AC Lite

I have the same problem on RB941-2nD

ISP roter wifi: Down: 100Mbps Up: 60Mbps

RB941-2nD wifi with latest firmware: Down:20Mbps Up.20Mbps

At the time of the test only my laptop is connected to wifi.

Is there any solution?
by lpt2007
Thu Oct 31, 2019 9:39 am
Forum: General
Topic: slow wifi speed mikrotik RB941-2nD
Replies: 11
Views: 976

slow wifi speed mikrotik RB941-2nD

Hi,

Why wifi speed on RB941-2nD is slower then the speed of wifi on my ISP router?

I Tested speed:

ISP roter wifi: Down: 100Mbps Up: 60Mbps

RB941-2nD: Down:20Mbps Up.20Mbps

At the time of the test only my laptop is connected to wifi.
by lpt2007
Thu Oct 17, 2019 10:53 pm
Forum: General
Topic: how to split isp multicast iptv on crs326
Replies: 8
Views: 795

Re: how to split isp multicast iptv on crs326

What is best way to connect more the 3x iptv boxes in network? ISP modem has 4x ports.
by lpt2007
Thu Oct 17, 2019 7:19 pm
Forum: General
Topic: how to split isp multicast iptv on crs326
Replies: 8
Views: 795

Re: how to split isp multicast iptv on crs326

I will try UDPxy. 8)

Still have one question. How to join two vlans on crs326? In my case vlan 301 (internet) and vlan 3999 tagged (video)?
by lpt2007
Thu Oct 17, 2019 6:48 pm
Forum: General
Topic: strange DHCP problem with PRINTER, IPTV boxes
Replies: 1
Views: 300

Re: strange DHCP problem with PRINTER, IPTV boxes

This problem cause wrong settings under the switch menu.

Problem solved. :D
by lpt2007
Thu Oct 17, 2019 2:16 pm
Forum: General
Topic: how to use VLAN on SXT
Replies: 0
Views: 243

how to use VLAN on SXT

Hi, Where can I find example how to setup vlan on SXT. I have SXT SA5 and SXT 5HPnD link to location 2km away. diagram: CRS125 ------- SXT SA5 ===2km=====SXT 5HPnD-------hAP lite ............................VLAN11................................... ............................VLAN12....................
by lpt2007
Thu Oct 17, 2019 12:07 pm
Forum: General
Topic: strange DHCP problem with PRINTER, IPTV boxes
Replies: 1
Views: 300

strange DHCP problem with PRINTER, IPTV boxes

Hi, I configured my network using multiple vlans and for each vlan I configured dhcp folowing this example. https://wiki.mikrotik.com/wiki/Manual:Basic_VLAN_switching Most of devices in my network works. But I have problem with printer and iptv boxes. For example when I connect printer I see printer...
by lpt2007
Tue Oct 15, 2019 1:15 am
Forum: General
Topic: how to split isp multicast iptv on crs326
Replies: 8
Views: 795

Re: how to split isp multicast iptv on crs326

Are you trying to get PIM or IGMP working or both?
both :)
by lpt2007
Mon Oct 14, 2019 4:58 pm
Forum: General
Topic: how to split isp multicast iptv on crs326
Replies: 8
Views: 795

how to split isp multicast iptv on crs326

Hi,

How to split isp iptv trough vlan to ports on mikrotik.

I have already configured vlan301 to ports (ether18,ether19,ether20) and internet is working.

Now I want send vlan3999 tagged multicast to this three ports.

Can someone put me to right direction?

thx in advance
by lpt2007
Mon Oct 14, 2019 3:57 pm
Forum: General
Topic: mail problem - no route to host
Replies: 2
Views: 353

Re: mail problem - no route to host

Hi,

Thx for quick reply.

I added rule for port 25. Now is working. Thanks
add action=dst-nat chain=dstnat comment="host-server-no0 25 tcp" dst-address=\
    192.168.1.2 dst-port=25 protocol=tcp to-addresses=192.168.200.3 \
    to-ports=25
by lpt2007
Mon Oct 14, 2019 1:01 pm
Forum: General
Topic: mail problem - no route to host
Replies: 2
Views: 353

mail problem - no route to host

I have fritzbox modem with intenal addresse 192.168.1.1 and I have mikrotik crs326 with internal addresse 192.168.200.1. Mikrotik is connected to modem with internal addresse 192.168.1.2 to mode m. I have created port forwarding for mail server with internal addresse 192.168.200.3. I forward port 11...
by lpt2007
Tue Oct 08, 2019 4:36 pm
Forum: General
Topic: configuration transfer from crs125 to crs326
Replies: 8
Views: 989

Re: configuration transfer from crs125 to crs326

I configure my CRS326 successfully. Now I still have one problem. When I watch my IPTV multicast starts spreading all over my connected ports and wifi networks. I found option under the bridge ports called Unknown multicast flood, and If I deselect this multicast stop spreading. But I have another p...
by lpt2007
Fri Oct 04, 2019 9:39 am
Forum: General
Topic: configuration transfer from crs125 to crs326
Replies: 8
Views: 989

Re: configuration transfer from crs125 to crs326

Thanks for the TIPs.
by lpt2007
Thu Oct 03, 2019 6:20 pm
Forum: General
Topic: configuration transfer from crs125 to crs326
Replies: 8
Views: 989

Re: configuration transfer from crs125 to crs326

With the CRS326, do not use multiple bridges if you are configuring VLAN. Otherwise you lose Hardware Offload which will cause a slow network
Why you said that? I have multiple bridges and VLANs on my CRS125 and everything works fine.
by lpt2007
Thu Oct 03, 2019 4:57 pm
Forum: General
Topic: configuration transfer from crs125 to crs326
Replies: 8
Views: 989

Re: configuration transfer from crs125 to crs326

Thx for answer.

Then probably is best to program from scratch to keep out of trouble :D ?
by lpt2007
Thu Oct 03, 2019 3:56 pm
Forum: General
Topic: configuration transfer from crs125 to crs326
Replies: 8
Views: 989

configuration transfer from crs125 to crs326

Hi,

It is possible to transfer configuration from crs125 to crs326?
by lpt2007
Fri Nov 30, 2018 12:18 am
Forum: SwOS
Topic: filter out multicast
Replies: 10
Views: 9340

Re: filter out multicast

Guess like this cant test it.
/interface ethernet switch rule add ports=ether1 switch=switch1 dst-address=224.0.0.0/4 new-dst-ports=

You should check your switch en and port nr.
Let met know if it works.
Where I find this in winbox?
by lpt2007
Mon Nov 26, 2018 5:35 pm
Forum: General
Topic: IPTV over 3xmikrotik ETH and VLAN - artifacts on picuure, picture stopping, ...
Replies: 1
Views: 237

IPTV over 3xmikrotik ETH and VLAN - artifacts on picuure, picture stopping, ...

Hi, Here is diagram how I configure three mt + isp modem in bridge mode. IPTV is working on all boxes, but when I turn three or more on picture stopping, artifacts, ... First MT from the top uses about 40-70%cpu. Why that much? MT2 and MT3 about 5-15%cpu I think that picture start freezing on high c...
by lpt2007
Sun Nov 25, 2018 7:28 pm
Forum: Beginner Basics
Topic: Multicast data seems to be going to all lan ports.
Replies: 7
Views: 1341

Re: Multicast data seems to be going to all lan ports.

Anybody solve this problem?

I installed multicast and enable snooping in bridge, but not working.

https://wiki.mikrotik.com/wiki/Manual:I ... P_Snooping

command:
interface bridge mdb print

show nothing, still multicasting on all ports in bridge at the same time
by lpt2007
Sun Nov 25, 2018 6:29 pm
Forum: Beginner Basics
Topic: ISP TV IPTV BOXES IN ONE BRIDGE - transfer rate prolem - all ports have same tr
Replies: 14
Views: 1085

Re: ISP TV IPTV BOXES IN ONE BRIDGE - transfer rate prolem - all ports have same tr

Why I have tr 5Mbps on mikrotik port when I look on IPTV device connected to same port I have tr 2Mbps?
by lpt2007
Sun Nov 25, 2018 2:05 pm
Forum: Beginner Basics
Topic: ISP TV IPTV BOXES IN ONE BRIDGE - transfer rate prolem - all ports have same tr
Replies: 14
Views: 1085

Re: ISP TV IPTV BOXES IN ONE BRIDGE - transfer rate prolem - all ports have same tr

this is because multicast is flooding over all ports in bridge

Sent from my Moto G (5) Plus using Tapatalk
Is this is normal?
I figured out that I see 25Mbps TR if my IPTV is idle, only turned on no tv stream?
by lpt2007
Sun Nov 25, 2018 1:24 pm
Forum: Beginner Basics
Topic: ISP TV IPTV BOXES IN ONE BRIDGE - transfer rate prolem - all ports have same tr
Replies: 14
Views: 1085

Re: ISP TV IPTV BOXES IN ONE BRIDGE - transfer rate prolem - all ports have same tr

this is because multicast is flooding over all ports in bridge

Sent from my Moto G (5) Plus using Tapatalk
Is this is normal?
by lpt2007
Sat Nov 24, 2018 1:46 pm
Forum: Beginner Basics
Topic: how to send vlan to bridge [SOLVED]
Replies: 11
Views: 1215

Re: how to send vlan to bridge [SOLVED]

Živjo,

Lepo :) je videt SLO znanje in pripravljenost na pomoč na samem vrhu foruma dobrega hardware.

Bo treba kak pir spit na ta račun ;)

Strinjam se pa glede ISP:)
by lpt2007
Fri Nov 23, 2018 5:31 pm
Forum: Beginner Basics
Topic: how to send vlan to bridge [SOLVED]
Replies: 11
Views: 1215

Re: how to send vlan to bridge [SOLVED]

Sorry I miss this questio. Yes I have a SiOL.

I already solved my problem like you said.

Thanks.

How did you know:) Are you from SLO?
by lpt2007
Fri Nov 23, 2018 5:29 pm
Forum: Beginner Basics
Topic: ISP TV IPTV BOXES IN ONE BRIDGE - transfer rate prolem - all ports have same tr
Replies: 14
Views: 1085

Re: ISP TV IPTV BOXES IN ONE BRIDGE - transfer rate prolem - all ports have same tr

No, with all iptv boxes on speed test shows me 50/20mbps.

The strange thing is I get 25Mbps on all ports under interface / TX??? Is this normal?
by lpt2007
Fri Nov 23, 2018 5:22 pm
Forum: General
Topic: ERROR - bridge port received packet with own address as source address
Replies: 2
Views: 642

ERROR - bridge port received packet with own address as source address

Hi,

What this error means:
ether5: bridge port received packet with own address as source address SOME MAC probably loop.

I find "SOME MAC" on local bridge and try to change it. But after minute or two new same error in log with mac I just change.
by lpt2007
Thu Nov 22, 2018 11:04 pm
Forum: Beginner Basics
Topic: ISP TV IPTV BOXES IN ONE BRIDGE - transfer rate prolem - all ports have same tr
Replies: 14
Views: 1085

Re: ISP TV IPTV BOXES IN ONE BRIDGE - transfer rate prolem - all ports have same tr

I don't use igmp prxy, Multicast hlper to full.

Still no joy:(
by lpt2007
Thu Nov 22, 2018 10:16 pm
Forum: Beginner Basics
Topic: client connect to wifi in other room - why [SOLVED]
Replies: 9
Views: 1054

Re: client connect to wifi in other room - why [SOLVED]

Thanks for all advices.

I will try to setup that way.
by lpt2007
Thu Nov 22, 2018 9:17 pm
Forum: Beginner Basics
Topic: how to send vlan to bridge [SOLVED]
Replies: 11
Views: 1215

Re: how to send vlan to bridge [SOLVED]

Seems like the RPI2 has only one physical port eth0 according to the notations eth0 and eth0.3999 but in the picture you have two cables connected between RPI2 and MIKROTIK. Confused.
Left not woking side of diagram is virtual connection.
by lpt2007
Thu Nov 22, 2018 8:50 pm
Forum: Beginner Basics
Topic: ISP TV IPTV BOXES IN ONE BRIDGE - transfer rate prolem - all ports have same tr
Replies: 14
Views: 1085

Re: ISP TV IPTV BOXES IN ONE BRIDGE - transfer rate prolem - all ports have same tr

I try but stuation not changed. No difference with igmp snooping enabled or disabled.
by lpt2007
Thu Nov 22, 2018 5:03 pm
Forum: Beginner Basics
Topic: client connect to wifi in other room - why [SOLVED]
Replies: 9
Views: 1054

Re: client connect to wifi in other room - why [SOLVED]

This is my wifi settings
by lpt2007
Thu Nov 22, 2018 4:54 pm
Forum: Beginner Basics
Topic: ISP TV IPTV BOXES IN ONE BRIDGE - transfer rate prolem - all ports have same tr
Replies: 14
Views: 1085

ISP TV IPTV BOXES IN ONE BRIDGE - transfer rate prolem - all ports have same tr

Hi, I have 5 IPTV BOXES connected to bridge-iptv (eth1-eth6). Every channel use about 5Mbps (eth2-6), but I have 25Mbps on all port (1-6). I ask because I'm facing the problem artifacts in pictures, it randomly stops. Why is that? It should not be like this: ISP MODEM trunk port - mt-eth1 (25Mbps) I...
by lpt2007
Thu Nov 22, 2018 2:33 pm
Forum: Beginner Basics
Topic: client connect to wifi in other room - why [SOLVED]
Replies: 9
Views: 1054

Re: client connect to wifi in other room - why [SOLVED]

Hi, Thanks for answers. The problem is because my laptop connects to mikrotik more distant wifi not working as it should(slow internet, connection error, ! simbol on wifi). I don't wanna use connection list because I need this laptop some time in other rooms and I need to connect to both wifi . any ...
by lpt2007
Wed Nov 21, 2018 12:27 pm
Forum: Beginner Basics
Topic: client connect to wifi in other room - why [SOLVED]
Replies: 9
Views: 1054

client connect to wifi in other room - why [SOLVED]

Hi, I have two mikrotik CRS125 with two configured wifi (same name and password). My question is why my laptop connect to other wifi three room away(why not on wifi witch is in the same room with better signal? When I trurn of wifi wihtch is three room away my laptop is connect to wifi in the same r...
by lpt2007
Mon Nov 19, 2018 12:31 pm
Forum: Beginner Basics
Topic: how to send vlan to bridge [SOLVED]
Replies: 11
Views: 1215

Re: how to send vlan to bridge [SOLVED]

Hi

Yes IPTV is on vlan 3999 and is multicast.

Here is diagram.
by lpt2007
Mon Nov 19, 2018 1:47 am
Forum: Beginner Basics
Topic: how to send vlan to bridge [SOLVED]
Replies: 11
Views: 1215

how to send vlan to bridge [SOLVED]

Hi I have local bridge with 192.168.0.0 net. My question is how to send IPTV from port ether24 to local bridge. In that bridge I have devices with one physical network (eth0) for internet and virtual network (eth0.3999) for IPTV. eth0 is working correctly, but for eth0.3999 I don't know how to send ...
by lpt2007
Sat Nov 17, 2018 1:19 am
Forum: Beginner Basics
Topic: igmpproxy for my lan on virtual mt router
Replies: 0
Views: 306

igmpproxy for my lan on virtual mt router

Currently I use igmp proxy running on my main mikrotik router. Because is using a lot of resurces I thinking to go virtual on my hyper-v server. It is possible to configure virtual mikrotik router on my hyper-v server to be a igmpproxy for my LAN(WATCHING IPTV)? How? Server is at the end of the line...
by lpt2007
Sun Apr 22, 2018 3:04 pm
Forum: General
Topic: How to know which two physical ports are connected together?
Replies: 6
Views: 590

Re: How to know which two physical ports are connected together?

In principle devices learn MAC addresses of peers available through certain network interface. On my RB I can see them under switch->host ... On the other hand you can find out MAC addresses of all RB interfaces. Then you can match the lists. I don't have host under switch menu? Under switch I only...
by lpt2007
Sun Apr 22, 2018 2:28 pm
Forum: General
Topic: How to know which two physical ports are connected together?
Replies: 6
Views: 590

Re: How to know which two physical ports are connected together?

What is the easyest way to check what connected on the other side of mikrotik ether port?
by lpt2007
Sun Apr 22, 2018 1:53 pm
Forum: General
Topic: How to know which two physical ports are connected together?
Replies: 6
Views: 590

Re: How to know which two physical ports are connected together?

Can you show me whole command if I login to first mikrotik and I wanna know to witch interface is connected from ether1?
by lpt2007
Sun Apr 22, 2018 1:07 pm
Forum: General
Topic: How to know which two physical ports are connected together?
Replies: 6
Views: 590

How to know which two physical ports are connected together?

How to find out which two physical ports are connected together on two mikrotiks if I can't go there and see?
by lpt2007
Fri Mar 16, 2018 9:06 pm
Forum: General
Topic: firewall - mangle - how to mark only internet traffic
Replies: 3
Views: 522

firewall - mangle - how to mark only internet traffic

Hi

It is possible to mark only internet traffic with firewall - mangle?

thx in advance
by lpt2007
Fri Mar 16, 2018 2:17 pm
Forum: General
Topic: redirect all traffic to internet trough vpn on second router
Replies: 3
Views: 451

Re: redirect all traffic to internet trough vpn

/IP / ROUTES

Dst address: 0.0.0.0/24
Gateway: <select gateway you want the traffic to go to>
Distance :1
Where to configure this route (first or second router)? The second one is not a gateway only have configured vpn interface: l2tp client called l2tp-out-point
by lpt2007
Fri Mar 16, 2018 2:08 pm
Forum: General
Topic: redirect all traffic to internet trough vpn on second router
Replies: 3
Views: 451

redirect all traffic to internet trough vpn on second router

Hi I have 2x mikrotik routers: first router is gateway: IP: 192.168.0.254 second router is connected to my VPN server using L2TP Client (interface: l2tp-out-point) IP: 192.168.0.253 And I have 3x separated networks: 192.168.0.0/24, 192.168.200.0/24, 192.168.200.2/24 all have internet connection trou...
by lpt2007
Tue Jun 28, 2016 2:54 pm
Forum: Beginner Basics
Topic: can not use web pages from local server
Replies: 2
Views: 370

Re: can not use web pages from local server

A. DNS converts http://www.domain.name to local IP address
B. Read this:  http://wiki.mikrotik.com/wiki/Hairpin_NAT
This information is help me out. THX
by lpt2007
Tue Jun 28, 2016 2:07 pm
Forum: Beginner Basics
Topic: can not use web pages from local server
Replies: 2
Views: 370

can not use web pages from local server

Why I can not use my local web pages from my local network. 

When I type my local domain name  "www.domain.name" I get my MIKROTIK router admin page instead of my web content?
by lpt2007
Tue May 24, 2016 11:57 am
Forum: General
Topic: How to solve this problem? I get this message from my ISP.
Replies: 3
Views: 1140

Re: How to solve this problem? I get this message from my ISP.

thx for answer. I will try this.
by lpt2007
Thu May 19, 2016 2:16 pm
Forum: General
Topic: How to solve this problem? I get this message from my ISP.
Replies: 3
Views: 1140

How to solve this problem? I get this message from my ISP.

You appear to be running an open recursive resolver at IP address ---.---.---.--- that participated in an attack against a customer of ours, generating large UDP responses to spoofed queries, with those responses becoming fragmented because of their size. Please consider reconfiguring your resolver ...
by lpt2007
Wed Jan 20, 2016 3:26 pm
Forum: Wireless Networking
Topic: it is possible to configure rb941-2nD hAP as wifi extender
Replies: 3
Views: 1278

Re:

There is no universal repeater function in ros. You must use the wds mode if supported by your actual Ap. Run cable instead. It's hundred times better.
RouterOS has no repeater function?
by lpt2007
Wed Jan 20, 2016 10:33 am
Forum: Wireless Networking
Topic: it is possible to configure rb941-2nD hAP as wifi extender
Replies: 3
Views: 1278

it is possible to configure rb941-2nD hAP as wifi extender

How to configure rb941-2nD hAP as extender.

Routerboard must connect to existing wifi HOME and extende wifi range.

Is this possibe? How?
by lpt2007
Sun Jan 17, 2016 1:54 pm
Forum: Forwarding Protocols
Topic: igmp proxy iptv - artifacts in picture problem
Replies: 7
Views: 1908

Re: igmp proxy iptv - artifacts in picture problem

I've seen other people have improvements when they set the interface queue type to ethernet-default instead of only-hardware-queue.

How to set queue type to ethernet default?
by lpt2007
Fri Jan 15, 2016 7:54 am
Forum: Forwarding Protocols
Topic: igmp proxy iptv - artifacts in picture problem
Replies: 7
Views: 1908

Re: igmp proxy iptv - artifacts in picture problem

I have CRS125-24G-1S-2HnD-IN and CPU usage is 40%-60% when streaming.
by lpt2007
Thu Jan 14, 2016 7:52 pm
Forum: Forwarding Protocols
Topic: IGMP Proxy queries disrupted by UPnP SSDP messages
Replies: 2
Views: 1818

Re: IGMP Proxy queries disrupted by UPnP SSDP messages

Do you also have artifacts in picture?
by lpt2007
Thu Jan 14, 2016 6:58 pm
Forum: Forwarding Protocols
Topic: igmp proxy iptv - artifacts in picture problem
Replies: 7
Views: 1908

igmp proxy iptv - artifacts in picture problem

Hi

I configured igmp proxy on my mikrotik for use with provaider iptv. The channels working on vlc player but I have artifacts in picture.

Anybody have similar problem?
by lpt2007
Mon Nov 16, 2015 7:12 am
Forum: Beginner Basics
Topic: winbox user who can only enable/disable wifi network
Replies: 5
Views: 1100

Re: winbox user who can only enable/disable wifi network

As far as I know this isn't possible. The permissions on mikrotik are not that granular. You could make a PHP script on a webserver using the API thought.
Can someone write example API script?
by lpt2007
Sun Nov 15, 2015 9:45 pm
Forum: Beginner Basics
Topic: winbox user who can only enable/disable wifi network
Replies: 5
Views: 1100

winbox user who can only enable/disable wifi network

Hi

I have 4x cAP WIFI with three wifi networks (HOME,GUEST, CHILDREN) and I need to confihure user who can log on in to winbox and the only thing that user can do is to disable CHILDREN wifi. Is this posible? How? Can this user disable all four CHILDREN wifi networks at once?

thx in advance
by lpt2007
Tue Nov 03, 2015 10:18 am
Forum: Beginner Basics
Topic: two mikrotik crs125-24-g1s-2hnd on two different networks
Replies: 2
Views: 334

Re: two mikrotik crs125-24-g1s-2hnd on two different networks

I am talking about 2 different network with different range of IP on two different devices. Dear Ipt2007 your request is not clear for me please can you give extra details about what do you want , be cause if you are talking about having 2 different network with different rang of IP address it is ve...
by lpt2007
Sat Oct 31, 2015 12:51 pm
Forum: Beginner Basics
Topic: how to configure mikrotik cap n2
Replies: 2
Views: 705

Re: how to configure mikrotik cap n2

Thx this solution is perfect. /ip firewall filter add action=drop chain=forward comment="drop Guest WiFi to internal" connection-state=new dst-address=<our private lan address space, for example 192.168.88.0/24> src-address=<your guest WiFi address space, for example 10.10.10.0/24> Put this on top o...
by lpt2007
Sat Oct 31, 2015 12:49 pm
Forum: Beginner Basics
Topic: two mikrotik crs125-24-g1s-2hnd on two different networks
Replies: 2
Views: 334

two mikrotik crs125-24-g1s-2hnd on two different networks

How to configure two mikrotik crs125 with two separate network. modem-------(port1)CRS125(1)-----(port1)CRS125(2) CRS125(1) ip: 192.168.0.254 network:192.168.0.0/24 CRS125(2) ip: 192.168.200.254 network:192.168.200.0/24 CRS125(1) is configutred as router (gateway address: 192.168.0.254) and on his n...
by lpt2007
Fri Oct 23, 2015 10:15 am
Forum: Wireless Networking
Topic: mikrotik cAP n2 as repeater bridge
Replies: 4
Views: 2322

Re: mikrotik cAP n2 as repeater bridge

cAP 2n have L4 license and support those modes:
aligment only
ap bridge
bridge
nstream dual slave
station
station bridge
station pseudobridge
station pseudobridge clone
station wds
wd slave

I must extend home and guest wifi of cAP 2n-1 to cAP 2n-2 but wireless is only option. Can someone help?
by lpt2007
Thu Oct 22, 2015 9:12 pm
Forum: Wireless Networking
Topic: mikrotik cAP n2 as repeater bridge
Replies: 4
Views: 2322

mikrotik cAP n2 as repeater bridge

I need to configure two mikrotik cAP n2 like this: ap wifi guest ap wifi home ap wifi guest ap wifi home - - - - - - - - ROUTER------LAN--------cAP n2-1----------WiFi-------------cAP n2-2 router/gateway ip: 192.168.0.254 cAP n2-1 ip: 192.168.0.253 cAP n2-2 ip: 192.168.0.252 wifi ap home network: 192...
by lpt2007
Mon Oct 12, 2015 2:15 am
Forum: Beginner Basics
Topic: how to configure mikrotik cap n2
Replies: 2
Views: 705

how to configure mikrotik cap n2

Hi I try to configure mikrotik cap n2 with two networks HOME and GUEST. ETH1 port is connected to LAN port of home network. I configure bouth networks to have internet access. But I can not configure GUEST network to dissalow access to my local lan. I wan't guest to have only internet access. How to...
by lpt2007
Tue Feb 10, 2015 2:44 pm
Forum: Beginner Basics
Topic: IP Tunnel problem
Replies: 4
Views: 855

Re: IP Tunnel problem

hi why you wanna make IPIP or Eoip tunnel between them ?? tunneling may reduce your router performance connect 2 routers together with cable and set a private ip on router1 and set a private ip address on the same range on other side dynamic route will automatically created. I wanna have two separa...
by lpt2007
Tue Feb 10, 2015 8:13 am
Forum: Beginner Basics
Topic: IP Tunnel problem
Replies: 4
Views: 855

Re: IP Tunnel problem

I try EoIP with this instructions:
https://www.mikrotik.com/testdocs/ros/2 ... e/eoip.php

Also not working!!!

Any suggestion?
by lpt2007
Sun Feb 08, 2015 10:13 am
Forum: Beginner Basics
Topic: IP Tunnel problem
Replies: 4
Views: 855

IP Tunnel problem

I have two mikrotik cloud router switch conected together on port 1 and I wanna make IP Tunnel between them. I followed this link instructions: http://wiki.mikrotik.com/wiki/Manual:Interface/IPIP but not not working. The router can't ping each other like in instructions. I get an error "HOST UNRICHA...
by lpt2007
Wed Jul 23, 2014 4:20 pm
Forum: Beginner Basics
Topic: internal I see my external address as router conf. page
Replies: 1
Views: 485

internal I see my external address as router conf. page

I configured my mikrotik router and externaly all working great(mail server and web server), but internaly I get routers configuration page when I type my webpage link.

What am I doing wrong?

thx in advance
alex