MikroTik

Morpheus1607

Hello everyone, we are an little Internetprovider from Germany and use Mikrotik Routers. In the last Time our costumers get attacks from i think that are botnets. The Botnets are attacking one address from the pppo pool with most from port 389 and 53, so that we added some firewall rules in raw to g...

Morpheus1607

when you want to use the MGNT VLAN to Switch you have to add the switch 1 CPU to the VLAN

/interface ethernet switch vlan
add vlan-id=221 ports=switch1-cpu

here is the link to the wiki

https://wiki.mikrotik.com/wiki/Manual:C ... s_examples

Morpheus1607

You have 2 hardware versions of the 260gs. first version is hardware version 1..... and the older hardware version second version is hardware version 2.... an´d the newer one where you can see css in the board name. you can't upgrade the 1.17 version to 2.0 and above. You have to change your hardware.

Morpheus1607

We use a simple Linux script to backup all of our MT switches. Works really well

curl --anyauth -u username:password http://IP-Address/backup.swb -o /Switch_Backup/MT/IP-Address.swb

Morpheus1607

I think we have allready found a solution for this. it wasn´t a doubled mac address or something. it was a faulty router, since it is disconnected, no log entries anymore.

Morpheus1607

We see same Issue between one CCR and a 2011 Board. Both have 6.35.2 Firmware. The CCR is the Bridge between AC and the 2011 is for the wireless costumers and makes the tunnel to the CCR. The Problem is since 2 or 3 days before we had no problems... We changed from Arp to Proxy Arp on the 2011 PPPoE...

Morpheus1607

Hello again,

the Script is working again.

Sometimes its so easy.

Thanks, u made my day.

Morpheus1607

we had a automated backup script for our MTs to backup all devices. Since 6. something, sorry i dont know the script doesn t work anymore.... :log info "export beginning now" :delay 1s :global ipadress [/ip address get [find interface="lo0"] address] :delay 1s :for i from=( [:len...

Morpheus1607

so the packets will be forwarded faster and doesn´t go to the other rules. Its good to use between mikrotiks.

Morpheus1607

Schreib mich mal per PN an dann können wir das in deutsch besprechen. Ist vielleicht einfacher

Morpheus1607

You schould look on AP Side if Airmax is enabled or not. If yes you will never get an connection from ubnt to SXT.

Turn off Airmax on AP Side and dont use any MT protocolls on SXT in Wireless just 802.11.

Morpheus1607

could you post your config to have a look?

i think it would be a little bit easier to look what the problem should be.

Morpheus1607

Do I have to add routes also? Even if I don't know the GW on the DHCP Side of the Router? DHCP will set the default GW for you You dont have to set routes on the wan side because its coming from the dhcp client on your wan side. if you look at the mikrotik with winbox under ip routes you will see t...

Morpheus1607

*) queue - added bucket-size setting to queues (derived from max-limit); *) queue - improve "/queue interface" menu; What does it mean??? I had updated a test device, but it uses no queues. What is the difference to older versions? i see on the queue interface all interfaces/bridges get a...

Morpheus1607

Same problem here. We have 80 dynamic simple queues (one for each PPPoE client coming from radius server) and 30 firewall rules. When the pppoe client makes a speedtest at speedtest.net or other he only gets with an 16 Mbit queue maximum of 12 mbit. queue types are standard dedault small -> pfifo li...

Morpheus1607

Morpheus1607

Hello Folks, we have a Access Concentrator connected via untagged VLAN over a Switch to our Internet Router. Both are MT CCRs. here is the Config of the IN Router: /interface ethernet set [ find default-name=ether1 ] comment=WAN l2mtu=1590 rx-flow-control=auto \ tx-flow-control=auto set [ find defau...

Morpheus1607

no one any idea???

Morpheus1607

Hello Folks, We have an CCR-1009 As PPPoE Server for our Costumers. There is one Instance. There are over 300 Costumers connected. In the evening we see one CPU gets very high on big load And now is my Question: Would it be usefull to use more than one PPP Instance for the costumers to get lower loa...

Morpheus1607

Oh sorry didn´t read backup. Yes only at the Export you can use verbose....

Morpheus1607

Caution. Backup is designed only for the original router. Things to note are the ROS version when the backup was taken. The Mac addresses will be overwritten if restored to a different router. If you really need to extract the config - Attempt to change the replacement router's firmware to the same...

Morpheus1607

Anyone knows how the performance is in real life situation on ubiquity gear? The folders looks nice but can it perform?

better than MT. Sorry for that. In our our Case we have tested both. Netmetal an UBNT AC Gear.

With a normal Nanobeam M5 we get 150 Mbit throuput over a 2 km link.

Morpheus1607

No One any ideas???

Morpheus1607

Hello Folks We wanted to Update one of our Backbone Links of Netmetals to 6.30.2 and they cant connect each other since the Update was scheduled. We didnt changed any Config Here are the configs off both AP and Station. AP: /interface wireless security-profiles set [ find default=yes ] supplicant-id...

Morpheus1607

We see this at some Devices too.

One CCR 1009
One CCR 1016
One 2011 UiAs

see the Screenshot below

We have the CCR 1009 as In Router
The CCR 1016 as Accessconcentrator and

the 2011 Board as Backbone Router with a EoIP Tunnel to another AC

All are at 6.29.1

Morpheus1607

Hello everyone, We try to foward our internal Exchange Server to reach our 10.0.0.0 Backbone Net. The Monitoring Server is bound in this network. It can ping the MT Router with the BB IP, but the forwarding to the Server doesn´t work. Here is the output from our Firewall Rules. /ip firewall nat add ...

Morpheus1607

we have the 3x3 Mimo Netmetal with 2 chains and its still no Problem. Just disable the 3rd Chain at 1st Installation an all will be fine.

Morpheus1607

yeah i know should the hello intervall higher or lower than default?

Morpheus1607

Oh not enough screenshot,

it is so that only the 2 stations are opsf neighbors. The rest are costumer Modems

Can u explain what DR means?

I Would first change the hello intervall.

Sorry my English is not the best....

Morpheus1607

Hello Guys, We have a Routed OSPF Net with Cisco Style VPLS Tunnels over BGP. The MT Interfaces are connected with Wireless UBNT Bridges here is the config of the two MTs that have Problems and spams the Logs. MT 1: /interface bridge add mtu=1500 name=HotSpot priority=0x2000 add mtu=1500 name=MGNT p...

Morpheus1607

The Switches work great wiht GB PoE,

We had Problems with 1.13 and auto on, but its still gone since 1.14...

Switch.png

Morpheus1607

Hallo Lutz,

danke für das Angebot, Ich rede mal mit meinem Chef und geb bescheid wenn wir welche bestellen wollen.

Morpheus1607

Bad antenna, very bad antenna for sure. Anyway I tried to use one dual pol antenna + one 23dbi panel and was worse than only 2 chains but it works very good with the pannel in another direction and link up with another station. :D This is what we we thought already. Do u know good stable triple cha...

Morpheus1607

Hello everyone, we bought this Antennas: http://www.wlan-shop24.de/5-GHz-WLAN-Richtantenne-Panel-3x3-MIMO-17dBi and this one: https://www.interprojekt.com.pl/netmetal-3xrpsma-2000mw-p-1641.html We thought it would be cool to have 3 chains in use for max throughput. The Link Distance was 2 km clear L...

Morpheus1607

Does anyone use the Syslog Server on Dude?

i had enabled in on the Server, but nothing comes to Syslog

where will the Syslog from client go?

Search found 35 matches

Firewall Rule against Botnet Attacks?

Re: CRS112-8P-4S Trunk and Hybrid VLAN Configuration

Re: RB260GS models

Re: SwOS auto backup

Re: Loop issue in VLAN trunking between two CCR Routers

Re: Loop issue in VLAN trunking between two CCR Routers

Re: Export Script not working anymore

Export Script not working anymore

Re: What is fasttrack ?

Re: Tunnel Problem!!

Re: XW firmware of ubnt doesnt associate with sxt lite 5

Re: New to MikroTik

Re: Using Mikrotik Router for Routing only, without NAT

Re: v6.35rc [release candidate] is released, new wireless package!

Re: Simple queue + CCR

Re: Simple Queue not Reaching full Amount

Simple Queue not Reaching full Amount

Re: More than 1 PPPoE Instance on CCR-1009

More than 1 PPPoE Instance on CCR-1009

Re: Backup file compatibility

Re: Backup file compatibility

Re: NV2 - News about Improvments?

Re: 2 Netmetal 5 cant connect on Wireless after Upgrade to 30.2

2 Netmetal 5 cant connect on Wireless after Upgrade to 30.2

Re: CCR1009 ether1-4 keeps dropping to 0 bytes / 0 packets

SMTP forward to internal Address in OSPF Routed Network

Re: Will it work? (2x2 MIMO antenna on 3x3MIMO RB)

Re: Strange Behave of 2 OSPF neighbors

Re: Strange Behave of 2 OSPF neighbors

Strange Behave of 2 OSPF neighbors

Re: 260GSP all poe port 100Mbit ???!!!

Re: Problem with 3x3 MIMO Antennas and Netmetal

Re: Problem with 3x3 MIMO Antennas and Netmetal

Problem with 3x3 MIMO Antennas and Netmetal

Syslog Server 4.0beta3