Community discussions

Search found 20 matches

by vikinggeek
Mon Oct 07, 2019 9:09 pm
Forum: General
Topic: Anybody ues AT&T Gigabit Fiber with Mikrotik RouterOS?
Replies: 73
Views: 8588

Re: Anybody ues AT&T Gigabit Fiber with Mikrotik RouterOS?

Seems like there are a few things going on here.... 1) The problem previously discussed in the thread regarding DHCP pertains only to IPv6 (it seems to sometimes be slow). In Northern California, your IPv4 address is assigned through the OLT (there are some older equipment that uses Radius) and it w...
by vikinggeek
Thu Oct 03, 2019 9:53 am
Forum: General
Topic: Anybody ues AT&T Gigabit Fiber with Mikrotik RouterOS?
Replies: 73
Views: 8588

Re: Anybody ues AT&T Gigabit Fiber with Mikrotik RouterOS?

This thread is mainly for discussions about how to bypass the AT&T residential gateways (RGs). General configuration questions are probably better handled in other treads. Could I use 10.10.10.1 as the MikroTik LAN address? The AT&T modem/gateway did not allow it. (I don't have TV or phone). All the...
by vikinggeek
Tue Oct 01, 2019 2:49 am
Forum: General
Topic: Anybody ues AT&T Gigabit Fiber with Mikrotik RouterOS?
Replies: 73
Views: 8588

Re: Anybody ues AT&T Gigabit Fiber with Mikrotik RouterOS?

The address that I got assigned on the BRIDGE_WAN was a 2001:: address that only made it about two hops out, for whatever reason. My understanding is that AT&T uses the 2001:: address for some of the set top box communication. Your observation is correct, it does not go outside AT&T's network and i...
by vikinggeek
Sat Sep 28, 2019 11:02 pm
Forum: General
Topic: Anybody ues AT&T Gigabit Fiber with Mikrotik RouterOS?
Replies: 73
Views: 8588

Re: Anybody ues AT&T Gigabit Fiber with Mikrotik RouterOS?

You should also check your BGW status page to make sure that you are in an area where you have dual stack IP. In my area you will find both dual stack and 6RD. If you are in a 6RD, you need to configure the 6-to-4 interface on the Mikrotik.
by vikinggeek
Sat Sep 28, 2019 10:57 pm
Forum: General
Topic: Anybody ues AT&T Gigabit Fiber with Mikrotik RouterOS?
Replies: 73
Views: 8588

Re: Anybody ues AT&T Gigabit Fiber with Mikrotik RouterOS?

No issues with the DHCPv6 on my end. Been running IPv6 for almost two years. Have you checked the "Rapid Commit" in the DHCPv6? I have it enabled, and I only ask for prefix (and I don't provide a hint). I've seen some instances where the OLT provides a 2001 address to the WAN interface. You should o...
by vikinggeek
Sat Sep 28, 2019 3:10 am
Forum: General
Topic: Anybody ues AT&T Gigabit Fiber with Mikrotik RouterOS?
Replies: 73
Views: 8588

Re: Anybody ues AT&T Gigabit Fiber with Mikrotik RouterOS?

There is not much to it regarding configuration of the static block: 1) Create the bridge for the internal networks 2) Create a VLAN and name it whatever you want 3) Assign the AT&T provided subnet addresses to the VLAN 4) Create firewall rules to let whatever traffic you want to go to the static IP...
by vikinggeek
Sat Sep 28, 2019 2:38 am
Forum: General
Topic: Anybody ues AT&T Gigabit Fiber with Mikrotik RouterOS?
Replies: 73
Views: 8588

Re: Anybody ues AT&T Gigabit Fiber with Mikrotik RouterOS?

You need to make sure that the BGW first has DHCPv4 working. The address obtained from the OLT (CO equipment) is a "dynamic" address that is actually bound to your profile and acts more like a static address. I've assigned the static addresses given by AT&T (/29) to a VLAN and connect my fixed addre...
by vikinggeek
Wed Sep 11, 2019 7:48 pm
Forum: General
Topic: Anybody ues AT&T Gigabit Fiber with Mikrotik RouterOS?
Replies: 73
Views: 8588

Re: Anybody ues AT&T Gigabit Fiber with Mikrotik RouterOS?

The authentication method is fairly well known by now. There is a nice solution for pfSense. https://github.com/aus/pfatt . For this to work: 802.1x from a bridge has to be working. See @wojo post https://forum.mikrotik.com/viewtopic.php?p=742598 (Everybody should +1 that thread) You need to get hol...
by vikinggeek
Wed Sep 11, 2019 2:41 am
Forum: General
Topic: Anybody ues AT&T Gigabit Fiber with Mikrotik RouterOS?
Replies: 73
Views: 8588

Re: Anybody ues AT&T Gigabit Fiber with Mikrotik RouterOS?

Apologize for the lateness posting my scripts (been traveling for the past few weeks). The script I use will automatically reboot the router if it detect loss of connectivity. Will post soon (promise) @robbz: Regarding the problem you describe, I had something similar happening in July. It turned ou...
by vikinggeek
Sat Aug 17, 2019 2:25 am
Forum: General
Topic: Anybody ues AT&T Gigabit Fiber with Mikrotik RouterOS?
Replies: 73
Views: 8588

Re: Anybody ues AT&T Gigabit Fiber with Mikrotik RouterOS?

First thing Iwould do is call ATT and tell them to send new modem an ask for a 210-700.. I did this because yes the Pace one slows down after some use and you gotta be rebooting it. I think the process would be the same though. Thanks for the recommendation! After obtaining the replacement modem, w...
by vikinggeek
Sat Aug 17, 2019 2:19 am
Forum: General
Topic: Anybody ues AT&T Gigabit Fiber with Mikrotik RouterOS?
Replies: 73
Views: 8588

Re: Anybody ues AT&T Gigabit Fiber with Mikrotik RouterOS?

I have successfully implemented the bypass method both to a stand-alone ONT (bypassing a BGW210) as well as using a SFP fiber module to a Ciena eMUX 5150 series (bypassing a NVG595) and it is running very well. Additionally, I have created a script that automates the startup in case of a reboot (e....
by vikinggeek
Sat Aug 10, 2019 3:40 am
Forum: General
Topic: Switching from IPv4 to IPv6 encrypted tunnels
Replies: 0
Views: 264

Switching from IPv4 to IPv6 encrypted tunnels

I need some help understanding the difference between IPv4 and IPv6 encrypted tunnels. Today we create L2TP links between the routers and encrypt them with IPSec using IPv4 addresses to establish the L2TP links. Because we now have stable interfaces, we can use OSPF to route between our sites both f...
by vikinggeek
Thu Aug 01, 2019 4:08 pm
Forum: General
Topic: Anybody ues AT&T Gigabit Fiber with Mikrotik RouterOS?
Replies: 73
Views: 8588

Re: Anybody ues AT&T Gigabit Fiber with Mikrotik RouterOS?

@wojo - I saw your other post earlier and figured out that you made some progress THANK YOU! Did you also file a ticket with support?
by vikinggeek
Tue Jul 30, 2019 3:59 pm
Forum: General
Topic: Anybody ues AT&T Gigabit Fiber with Mikrotik RouterOS?
Replies: 73
Views: 8588

Re: Anybody ues AT&T Gigabit Fiber with Mikrotik RouterOS?

We are standardized on the CCR line with UBNT APs, as this gives us the headroom we need on 1Gb/s. Firewall rules, VPNs, OSPF, etc. quickly adds up.
by vikinggeek
Thu Jul 11, 2019 10:55 am
Forum: General
Topic: Anybody ues AT&T Gigabit Fiber with Mikrotik RouterOS?
Replies: 73
Views: 8588

Re: Anybody ues AT&T Gigabit Fiber with Mikrotik RouterOS?

I'm still stuck on the 802.1X question. To simply the issue, I'm looking for a solution to the following sequence: (the Residential Gateway (RG) is attached to port A, the ONT to port B, and whatever network you have is routed over the bridge) The RG initiates a 802.1/X EAPOL-START from port A. If t...
by vikinggeek
Thu Jul 11, 2019 10:24 am
Forum: General
Topic: Anybody ues AT&T Gigabit Fiber with Mikrotik RouterOS?
Replies: 73
Views: 8588

Re: Anybody ues AT&T Gigabit Fiber with Mikrotik RouterOS?

Wanted to report back that with the 6.45.1 upgrade the DHCPv6 client is working on the dual stack AT&T GPON network. I now have access to the entire /60! What I have learned from getting IPv6 on AT&T and Comcast network is to mix dynamic and static subnets i.e. let the client communicate with the IS...
by vikinggeek
Sat Jul 06, 2019 1:45 am
Forum: General
Topic: Anybody ues AT&T Gigabit Fiber with Mikrotik RouterOS?
Replies: 73
Views: 8588

Re: Anybody ues AT&T Gigabit Fiber with Mikrotik RouterOS?

I have successfully implemented the bypass method both to a stand-alone ONT (bypassing a BGW210) as well as using a SFP fiber module to a Ciena eMUX 5150 series (bypassing a NVG595) and it is running very well. Additionally, I have created a script that automates the startup in case of a reboot (e.g...
by vikinggeek
Thu Apr 18, 2019 9:47 am
Forum: Announcements
Topic: v6.45beta [testing] is released!
Replies: 305
Views: 71028

Re: v6.45beta [testing] is released!

!) dot1x - added support for IEEE 802.1X Port-Based Network Access Control (CLI only); I hope I can use this to authenticate to AT&T fiber services directly. I'll need a certificate, but that's obtainable. @pcunite - Can you provide a pointer to how to obtain the certificate? Currently, Still need ...
by vikinggeek
Sat Aug 02, 2014 4:42 am
Forum: General
Topic: IPSec VPN over PPP USB 4G modem not working
Replies: 0
Views: 869

IPSec VPN over PPP USB 4G modem not working

Hello, I'm new to the RouterOS, but I'm over the initial learning curve and managed to get most features working including IPSec VPN between the 951G-2HnD and a RV016 using the Ethernet port. I also got the Sierra Wireless AC320U 4G modem working over PPP. What is not working is the IPSec VPN when r...