viewtopic.php?f=7&t=129616RouterOS version 6.42 has been released in public "current" channel!
*) wireless - fixed incompatibility with macOS clients;
Please, could you detail a bit more?
Does the basic "request a certificate" option in CAPsMAN use SCEP? Or does that use something else?Note: if SCEP and CAPsMAN is used, make sure to upgrade clients first, only then upgrade server side. Otherwise after server upgrade old clients will not be able to get certificates.
You can (presumably) always netinstall with a custom .rsc fileNew approach for standard default settings? Does it mean that if we loose the label and reset the device, we will not be able to log in anymore?
Which country and frequency did you set it to? Some frequencies require a very long radar search (10 minutes)I also having problem with DFS on AP in this version. One of my AP still detecting for radar and never switch back to normal mode. I don't have this issue on clients. AP si RB411.
Try disabling TKIP in the security profiles, and set your country in the "advanced" bit of wireless configuration (a lot of 5GHz channels can't be used unless you set the right country)Hi,
Try conf. from print screen.
This is working for my setup IP6s,Galaxy Note2,Ipad,Hp Laptop .....
Radar detection is required on some frequencies. Some require just a minute of scanning, others 10 minutes. If no radar is found the AP will go into "running - AP" mode.5GHZ does not work for me - "detecting RADAR".
The same on v6.38.3.
v6.38.1 seems to work though.
P.S. Country: Sweden
Do you mean "220.127.116.11.7 Uniform Spreading" in Final draft ETSI EN 301 893 V2.1.0 (2017-03)?In fact, limiting the DFS scan range using a scan list is explicitly disallowed in the regulations.
Those should already roam to the strongest AP in range. Just give them the same SSID and security settings, and it should work.I want to roaming my wifi clients. such as smartphones, laptop, etc...
It's been in an RC version for months. It's now in the "current" release channel. If you need the old functionality, there's the "bugfix only" channel.Put it to some beta ROS version first, give it good tests with feedbacks and provide same functionality with minimum reconfiguration required.
If you want support to answer, you should probably email them. This isn't a support forum.Mikrotik support , please provide some info here please .
Yes. You can configure both radios independently.Hi,
can wap ac be used in 5Ghz for client and 2,4 ghz for AP mode ?
It's being worked on in the latest version though - have a look at the 6.38rc versions (or 6.38 when it gets a final/stable release)ROS 6.x is very bugged and level=unique dont work:
http://forum.mikrotik.com/viewtopic.php ... 2&p=541653
There's a big list (and map) on http://www.mikrotik.com/training/centers - most trainers have phone numbers and email addresses you can use to contact them.Hi, just tell me how can i contact trainer in my area,
This happens when the "ICMP multi-part extension" is present.I see MPLS in some of my traceroute outputs. What is their meaning?
It seems like LLDP is enabled automatically when neighbour discovery is enabled for an interface.Where can I configure LLDP, I cant find anything related to it in "/ip neighbor" or anywhere else.
Have you checked the "System - Resources" information? Maybe the device is running out of memory?HI all!
We have under NAS CCR1036-8G-2S+ board.
There is a problem. The maximum number of PPPoE sessions does not rise above 3041, which is not UNLIMITED!
How do I remove this limit?
Inside? I like the wAP AC a lot myself.I just upgraded my internet and got the same problem with RB2011, so I am looking to replace it with CCR1009, but I'll need a wifi too. What will you recommend?
On devices with multiple ports, they tend to only print the first and last mac addresses of the range.There is a missing gap, I think they don't print out all Mac
The CCR series routers. The 1100AHx2 (the pre-CCR flagship). And once the hardware crypto works (I don't know if it does already), the RB3011 series should be able to reach this as well.Which wireless router can provide 50~100 Mbps throughput for OpenVPN ?
I'm assuming more information will be up on routerboard.com soon as well?More info in the brochure: http://www.mikrotik.com/download/share/wAP.pdf