Do these multicast fixes mean IPv6 will work better again?
Because my routers keep forgetting to respond to IPv6 neighbor solicitations over multicast after a while. Meaning it _seems_ to work for a while.. and then when you leave it breaks.
viewtopic.php?f=7&t=129616RouterOS version 6.42 has been released in public "current" channel!
*) wireless - fixed incompatibility with macOS clients;
Please, could you detail a bit more?
Thank you
xavier
Does the basic "request a certificate" option in CAPsMAN use SCEP? Or does that use something else?Note: if SCEP and CAPsMAN is used, make sure to upgrade clients first, only then upgrade server side. Otherwise after server upgrade old clients will not be able to get certificates.
You can (presumably) always netinstall with a custom .rsc fileNew approach for standard default settings? Does it mean that if we loose the label and reset the device, we will not be able to log in anymore?
Is there any documentation about this feature? I can't find anything regarding 802.11u on the wiki.*) wireless - fixed 802.11u wireless request processing;
Which country and frequency did you set it to? Some frequencies require a very long radar search (10 minutes)I also having problem with DFS on AP in this version. One of my AP still detecting for radar and never switch back to normal mode. I don't have this issue on clients. AP si RB411.
Do you mean "4.2.6.2.7 Uniform Spreading" in Final draft ETSI EN 301 893 V2.1.0 (2017-03)?In fact, limiting the DFS scan range using a scan list is explicitly disallowed in the regulations.
Those should already roam to the strongest AP in range. Just give them the same SSID and security settings, and it should work.I want to roaming my wifi clients. such as smartphones, laptop, etc...
Those RCs just keep coming and comingVersion 6.38rc51 has been released.
If you want support to answer, you should probably email them. This isn't a support forum.Mikrotik support , please provide some info here please .
thanks !
I assume this is a typo, and it's actually rc48? Or did the number go down?Version 6.38rc38 has been released.
Yes. You can configure both radios independently.Hi,
can wap ac be used in 5Ghz for client and 2,4 ghz for AP mode ?
It's being worked on in the latest version though - have a look at the 6.38rc versions (or 6.38 when it gets a final/stable release)ROS 6.x is very bugged and level=unique dont work:
http://forum.mikrotik.com/viewtopic.php ... 2&p=541653
Are you using NAT between the CAP and the manager?but the question is why i get conflict on the same device
This will make deployment so much easier! Thanks*) certificates - added support for PKCS#12 export;
There's a big list (and map) on http://www.mikrotik.com/training/centers - most trainers have phone numbers and email addresses you can use to contact them.Hi, just tell me how can i contact trainer in my area,
This happens when the "ICMP multi-part extension" is present.I see MPLS in some of my traceroute outputs. What is their meaning?
It seems like LLDP is enabled automatically when neighbour discovery is enabled for an interface.Where can I configure LLDP, I cant find anything related to it in "/ip neighbor" or anywhere else.
Have you checked the "System - Resources" information? Maybe the device is running out of memory?HI all!
We have under NAS CCR1036-8G-2S+ board.
There is a problem. The maximum number of PPPoE sessions does not rise above 3041, which is not UNLIMITED!
How do I remove this limit?
Inside? I like the wAP AC a lot myself.I just upgraded my internet and got the same problem with RB2011, so I am looking to replace it with CCR1009, but I'll need a wifi too. What will you recommend?
On devices with multiple ports, they tend to only print the first and last mac addresses of the range.There is a missing gap, I think they don't print out all Mac
I'd say the VRRP fix would imply that?What about load balancing - Is this fixed?
The CCR series routers. The 1100AHx2 (the pre-CCR flagship). And once the hardware crypto works (I don't know if it does already), the RB3011 series should be able to reach this as well.Which wireless router can provide 50~100 Mbps throughput for OpenVPN ?
I'm assuming more information will be up on routerboard.com soon as well?More info in the brochure: http://www.mikrotik.com/download/share/wAP.pdf