Community discussions

MUM Europe 2020

Search found 27 matches

by Megakoresh
Tue Sep 26, 2017 9:14 pm
Forum: Wireless Networking
Topic: received disassoc sending station leaving (8)
Replies: 63
Views: 42727

Re: received disassoc sending station leaving (8)

Same problem. I have CapsMAN running on hAP provisioning to WAP on second floor. Same SSID, AES, dual band. Occurs on every client that connects to the 2.4Ghz antenna on either, and because of interference patterns the clients often jump back and forth between bands, resulting in insane speed drops ...
by Megakoresh
Sat May 06, 2017 11:37 am
Forum: General
Topic: [Possible virus/bug] Terminal, User and many other settings became unavailable (Terminal not allowed (9))
Replies: 9
Views: 2602

Re: [Possible virus/bug] Terminal, User and many other settings became unavailable (Terminal not allowed (9))

Any way I could avoid doing a factory reset for this? Yes. You could use a Netwatch trick to gain full privileges and then remove the rogue user. That thread... I saw those exact scripts among my files too! Thought they were pretty suspicious, but I tried to run that url from the script from a VM v...
by Megakoresh
Fri May 05, 2017 7:16 pm
Forum: General
Topic: [Possible virus/bug] Terminal, User and many other settings became unavailable (Terminal not allowed (9))
Replies: 9
Views: 2602

Re: [Possible virus/bug] Terminal, User and many other settings became unavailable (Terminal not allowed (9))

Another good idea is to restrict access to services by ip (/ip service). Making services only available from local ip ranges / subnets will help against those attacks and btw did help vs. the current exploit either.
Yes, that's what I did.
by Megakoresh
Fri May 05, 2017 3:08 pm
Forum: General
Topic: [Possible virus/bug] Terminal, User and many other settings became unavailable (Terminal not allowed (9))
Replies: 9
Views: 2602

Re: [Possible virus/bug] Terminal, User and many other settings became unavailable (Terminal not allowed (9))

Wrong. If you use default config (with preconfigured WAN and LAN), RouterOS blocks connection attempts from WAN using firewall rule: /ip firewall filter add chain=input action=drop in-interface=<WAN> If you start with blank configuration (either reset config with no default, or if you remove defaul...
by Megakoresh
Fri May 05, 2017 12:53 pm
Forum: General
Topic: [Possible virus/bug] Terminal, User and many other settings became unavailable (Terminal not allowed (9))
Replies: 9
Views: 2602

Re: [Possible virus/bug] Terminal, User and many other settings became unavailable (Terminal not allowed (9))

UPDATE: Nope, I just got hacked. After reboot whatever they did to the logging got removed and I saw insane spam of login attempts with random usernames from an IP that traced to Hangzhou... Question is how they managed to get in in the first place. I thought that RouterOS does not allow management ...
by Megakoresh
Fri May 05, 2017 12:26 pm
Forum: General
Topic: [Possible virus/bug] Terminal, User and many other settings became unavailable (Terminal not allowed (9))
Replies: 9
Views: 2602

[Possible virus/bug] Terminal, User and many other settings became unavailable (Terminal not allowed (9))

UPDATE: I got hacked by someone who's IP traced to Hangzhou. This is neither a virus nor a bug. Unfortunately I can't really tell how they got in, but I if you notice weird behaviour like speed dropping, go to logs instantly, that's a lesson I learned. Although I still don't understand why they were...
by Megakoresh
Sun Apr 23, 2017 3:40 pm
Forum: General
Topic: How to build a 2.4+5Ghz home network using hAP AC and wAP?
Replies: 5
Views: 3918

Re: How to build a 2.4+5Ghz home network using hAP AC and wAP?

UPDATE: While figuring out how to deal with SPF connector wavelengths I decided to setup this CAPsMAN thingy, and after many factory resets I THINK I have it working (can't rightly say yet if the clients can properly switch based on signal strength, and I have not yet added ACL rules for that). For ...
by Megakoresh
Thu Apr 20, 2017 10:48 pm
Forum: General
Topic: Are there any dual SC to SFP transcievers compatible with hAP AC?
Replies: 4
Views: 668

Re: Are there any dual SC to SFP transcievers compatible with hAP AC?

Ok, that cable works for sure but I have no experience with that SFP. You might want to check with others or use the MikroTik SFP. However, I don't think MikroTik is very picky about supported SFP types. Hey, on that front it occurred to me: How do I know the if the cable and SFP transciever I buy ...
by Megakoresh
Thu Apr 20, 2017 5:59 pm
Forum: General
Topic: Are there any dual SC to SFP transcievers compatible with hAP AC?
Replies: 4
Views: 668

Re: Are there any dual SC to SFP transcievers compatible with hAP AC?

Right then, thanks. I just needed a confirmation from someone who knows this shit better than I do.
by Megakoresh
Thu Apr 20, 2017 5:17 pm
Forum: General
Topic: Are there any dual SC to SFP transcievers compatible with hAP AC?
Replies: 4
Views: 668

Are there any dual SC to SFP transcievers compatible with hAP AC?

Hello, as a kind of follow up to this topic (which I will update, with my results once I am done), I now have another question: So I just received this router and I was wondering if there's any SFP connectors that can accept my dual SC optical input so that I don't have to deal with the media conver...
by Megakoresh
Tue Apr 04, 2017 11:10 pm
Forum: General
Topic: How to build a 2.4+5Ghz home network using hAP AC and wAP?
Replies: 5
Views: 3918

Re: How to build a 2.4+5Ghz home network using hAP AC and wAP?

Thanks for the suggestion, I never even knew what CAPSMAN is. Will try it. Unfortunately I can't utilize the PoE out because wAP on the second floor has to connect to the ethernet cabling embedded into the house, which was constructed in 2006 and doesn't have PoE support. But that's not a problem, I...
by Megakoresh
Tue Apr 04, 2017 8:54 pm
Forum: General
Topic: How to build a 2.4+5Ghz home network using hAP AC and wAP?
Replies: 5
Views: 3918

How to build a 2.4+5Ghz home network using hAP AC and wAP?

Hello! I have some questions about a setup I want to do for my home network. The setup itself looks somewhat like this: home network.png Explanation: I will have (once it arrives) a Mikroptik hAP AC router on the first floor with 4 connected ethernet ports. The first one will go to wAP on the second...
by Megakoresh
Thu Jul 28, 2016 8:07 pm
Forum: RouterBOARD hardware
Topic: wAP AC (General questions and experience)
Replies: 118
Views: 45549

Re: wAP AC (General questions and experience)

All I know is I ordered one of these things from amazon for my home (to extend the WiFi, my old 951G-2HnD couldn't maintain a good speed on the second floor) and it arrived defective (doesn't turn on, and it's the actual AP that's broken - I tested PoE injector with other devices and it works fine)....
by Megakoresh
Sun Jan 10, 2016 10:22 am
Forum: Beginner Basics
Topic: How to set up a "Home VPN" on RouterOS?
Replies: 12
Views: 2798

Re: How to set up a "Home VPN" on RouterOS?

Forgot to mention, turn off DHCP on Mikrotik too, otherwise it will work even less :lol: For what exactly do I turn off DHCP? The link between D-Link and Mikrotik? Because I can't exactly turn it off for WiFi. Others in my family can barely turn WiFi on and off, let alone remember and punch in an I...
by Megakoresh
Sat Jan 09, 2016 9:37 am
Forum: Beginner Basics
Topic: How to set up a "Home VPN" on RouterOS?
Replies: 12
Views: 2798

Re: How to set up a "Home VPN" on RouterOS?

Hello. From my point of view, you are dealing with different segments of addresses here. One is that your ISP gave you, second is from your Mikrotik router. The best choice would be to attach directly your Mikrotik router to your ISP router and then buy some cheap AP that could do the work for the ...
by Megakoresh
Fri Jan 08, 2016 1:42 am
Forum: Beginner Basics
Topic: How to set up a "Home VPN" on RouterOS?
Replies: 12
Views: 2798

Re: How to set up a "Home VPN" on RouterOS?

I didn't think there would actually be replies! Ok so from bottom up: Like I explained - the network is organized this way because of the way the house is constructed. The entry point (where the fiber is plugged into the converter) is downstairs. At the same spot are 4 RJ-45 outlets each of which co...
by Megakoresh
Sun Jan 03, 2016 5:17 pm
Forum: Beginner Basics
Topic: How to set up a "Home VPN" on RouterOS?
Replies: 12
Views: 2798

How to set up a "Home VPN" on RouterOS?

I have the following network at home: http://i.imgur.com/5fJ6IWo.png The task is to share the printer so that all clients, including wireless can print. As I am sick of the constant problems posed by HomeGroup (e.g. recently installed Windows 10 on all PCs, now all Wi-Fi connected laptops see old Wi...
by Megakoresh
Tue Aug 19, 2014 10:20 am
Forum: Beginner Basics
Topic: Issue with port-forwarding
Replies: 20
Views: 4359

Re: Issue with port-forwarding

You must go step by step and make sure that something is correct, before moving on to next thing. I'd start at the router. As a minimal config, you have outgoing NAT: /ip firewall nat add action=masquerade chain=srcnat out-interface=Internet Then you need port forwarding rule. This one will work ev...
by Megakoresh
Mon Aug 18, 2014 10:27 pm
Forum: Beginner Basics
Topic: Issue with port-forwarding
Replies: 20
Views: 4359

Re: Issue with port-forwarding

The connection is definitely getting rejected somewhere, I have these settings set correctly as I understand now, it just gets refused for some reason anyway. And no logs say anything. I havent changed any filter rules or anything like that. I had the default configuration and went to forward ports ...
by Megakoresh
Mon Aug 18, 2014 6:47 pm
Forum: Beginner Basics
Topic: Issue with port-forwarding
Replies: 20
Views: 4359

Re: Issue with port-forwarding

Well I did that and it doesn't work again. Also I tried entering my local PC IP with this port in the browser and it said Connection refused. That with Windows Firewall off and Avast Firewall not logging any blocked traffic. What might be going on?
by Megakoresh
Mon Aug 18, 2014 6:33 pm
Forum: Beginner Basics
Topic: Issue with port-forwarding
Replies: 20
Views: 4359

Re: Issue with port-forwarding

But that is local network IP, how could I create rule by that if whatever services I am trying to forward for don't even see this address?
by Megakoresh
Fri Aug 15, 2014 7:22 pm
Forum: Beginner Basics
Topic: Issue with port-forwarding
Replies: 20
Views: 4359

Re: Issue with port-forwarding

So um noone knows what's wrong? I still have no idea how to forward with this router...
by Megakoresh
Thu Aug 14, 2014 1:18 pm
Forum: Beginner Basics
Topic: Issue with port-forwarding
Replies: 20
Views: 4359

Re: Issue with port-forwarding

Fair enough, I suspected that it was something to do with the UDP and the port checkers, but the problem is still there, I can not get ANY port checkers to show that the ports are open for any of those rules I have tried http://www.portcheckers.com/ http://ping.eu/port-chk/ http://www.canyouseeme.or...
by Megakoresh
Thu Aug 14, 2014 12:57 pm
Forum: Beginner Basics
Topic: Issue with port-forwarding
Replies: 20
Views: 4359

Re: Issue with port-forwarding

Yes I did just that. My PC address is 254 and I made it static so it doesn't change at some point. Still doesn't work. The port checkers report the ports as closed. My settings for NAT look like this: http://i.imgur.com/ikAe9CN.png And the forward address is now for my PC: 192.168.88.254. I tried pu...
by Megakoresh
Thu Aug 14, 2014 11:40 am
Forum: Beginner Basics
Topic: Issue with port-forwarding
Replies: 20
Views: 4359

Re: Issue with port-forwarding

You are telling me to do the exact same thing through the terminal that I just spent the whole day doing via GUI and which didn't work, which is why I made this thread. As far as log goes, no there is nothing about NAT in there, it does not even log when it receives a packet, like what happens on TC...
by Megakoresh
Thu Aug 14, 2014 9:56 am
Forum: Beginner Basics
Topic: Issue with port-forwarding
Replies: 20
Views: 4359

Re: Issue with port-forwarding

What do you mean? How do I find the IP of the PC? On my previous router, it allowed me to set the number for each PC, for example PC with #10 would have internal IP 192.168.0.10 and so on. But this MikroTik, I can't figure out how to set to do the same. And the "IP" I have for my PC right now is 192...
by Megakoresh
Thu Aug 14, 2014 12:36 am
Forum: Beginner Basics
Topic: Issue with port-forwarding
Replies: 20
Views: 4359

Issue with port-forwarding

I am trying to set up port forwarding for Killing floor. I followed this guide to set up ports, but when I attempt to check them using http://ping.eu/port-chk/ , it says port closed for either of them. The rule for one of the port ranges looks like this: http://i.imgur.com/jjIAM5T.png http://i.imgur...