One more thing, if i replace the CRS125 by CRS328-24P-4S+RM to handle the vlan and routing stuff, would it last for wirespeed or
would i have to set the CRS328 as switch and let a bigger router handle the routing?
I already read a bit about the vlan stuff in the links you posted... So i cannot simply add a vlan interface with vlan tag 20 for example on the virtual guest wlan interface and set the guest wlan interface with VLAN Mode: use tag / VLAN ID: 20. The following i am not sure what would be the right wa...
Thanks for the information, will first read all that stuff...
I just want to vlan the guest network (internet access only) in the first step, my old crs125 should handle that.
Maybe later when things are growing i will replace the crs with another device...
Hi everybody, i am trying to setup up a VLAN isolated guest network with internet only access. The red home network in the diagram is already created but i am competely new to VLAN. Could anyone point me in the right direction or have a tutorial with a similar setup i can follow? Thanks in advance, ...
Just tested a metarouter openwrt image on my system. Eating way too much cpu, maybe that is possible on a ccr or so, but no go on smaler mikrotik devices...
Any news on this, i need to push routes to clients from the server, never tried metarouter. BUT i like to have this out of the box with mikrotik. If you need to have full openvpn support, the solution cannot be to have a metarouter running for that...
Hi, i need some help with mikrotik scripting. I want to telnet to a modem (i can unfortunately not use ssh, because it is not supported) and run a command there and use the output to fill some variables to set download/upload rates in simple queues. On linux i tried the following, which is working: ...
Downgrade to 6.27 and its gone, there are several posts in the forum with the same problem. I guess its not already identified what is causing the problems under 6.28...
i can confirm the sector write problem. after some monitoring i found out, that the problem probably might be that i have dynamically created address lists in firewall, which is causing this issue for me. i have alot of other services running like dhcp dns ntp but i haven't had time to check them al...
Hi! I want to define a firewall rule with "In. interface" ovpn. Is there something like a wildcard i can use for all openvpn users like <ovpn-*> which i could define in the firewall? I tested with <ovpn-username> but after the openvpn session is closed the firewall rule is getting invalid ...
@strods: I think my problem directly after the update is related to the new romon feature maybe somehow: 10.10.10.1_cpu-day.png See the two peaks in CPU Usage right after the update, nothing was changed in the config. Then i read about the new romon feature, activated it and deactivated it again and...
@crs125: And again after reboot (the update to 6.28, done just before) after a few hours cpu is magically going high from 2% to 75-100% for hours and hours, loosing packets and have to reboot. Nice job with the update
Rolling back...
After Upgrading my CRS125 and the automatic reboot i also had 75 - 100% CPU, another rebooted helped to solve this problem, no clue what was causing this, i was rebooting the router because i was loosing packets all over the network and after i could check again the monitoring system i saw the high ...
Hi, i just configured an openvpn server on mikrotik for testing and i set up a very basic firewall. The setup is the following: @CRS125 the port 24 is set up with no master port. On that port is a external modem for the internet connection which is done via pppoe. The openvpn server is listening on ...
i have an CRS 125, via the supplied USB OTG Cable i can attach an USB Stick and Format it as disk.
I can see the disk in File Manager after formatting.
Is there any was to store Graphing on the formatted USB Stick instead in RAM?