Community discussions

MikroTik App

Search found 176 matches

by eddieb
Thu Aug 27, 2020 4:50 pm
Forum: Announcements
Topic: v6.47.2 [stable] is released!
Replies: 90
Views: 16470

Re: v6.47.2 [stable] is released!

updating to 6.47.2 went smooth ... from 6.47.1 to 6.47.2 done thru the dude ;-) No problems so far
Still running OSX 10.14.x to be able to run the 32bit Dude in Dude4Mac 6.47.2
by eddieb
Thu Aug 20, 2020 8:22 am
Forum: Wireless Networking
Topic: Mikrotik wi-fi and Iphone = problem
Replies: 91
Views: 68727

Re: Mikrotik wi-fi and Iphone = problem

set [ find default-name=wlan2 ] band=5ghz-a/n/ac channel-width=20/40mhz-Ce country=netherlands disabled=no frequency=5260 installation=indoor max-station-count=50 mode=ap-bridge preamble-mode=long radio-name=funny5 security-profile=funny ssid=funny station-roaming=enabled wireless-protocol=802.11 w...
by eddieb
Wed Aug 19, 2020 10:40 pm
Forum: Wireless Networking
Topic: Mikrotik wi-fi and Iphone = problem
Replies: 91
Views: 68727

Re: Mikrotik wi-fi and Iphone = problem

running ROS for a couple of years in an Apple only network (IOS/IPadOS/OSX)
using 10 pc of hAP AC (RB962UiGS-5HacT2HnT) and max 250 wireless devices.
Everything works fine, no problems.
by eddieb
Fri Jul 17, 2020 10:36 am
Forum: General
Topic: firefox 78.0.2 can not connect to mikrotik sites ...
Replies: 10
Views: 2347

Re: firefox 78.0.2 can not connect to mikrotik sites ...

Hi @Normis,

thanks for keeping with me,
somehow the problem disappeared after a couple of days.
I really hope to find a cause but the lack of logging makes that difficult.
by eddieb
Thu Jul 16, 2020 9:26 am
Forum: General
Topic: firefox 78.0.2 can not connect to mikrotik sites ...
Replies: 10
Views: 2347

Re: firefox 78.0.2 can not connect to mikrotik sites ...

still not working on FF 78.0.2 on OSX ...
all other browsers work.
to bad no error message or logging ...
by eddieb
Sat Jul 11, 2020 8:50 pm
Forum: General
Topic: firefox 78.0.2 can not connect to mikrotik sites ...
Replies: 10
Views: 2347

Re: firefox 78.0.2 can not connect to mikrotik sites ...

yeah, that is the windows solution, i'd prefer the *nix solution, find the cause and solve it ... Screenshot 2020-07-11 at 19.48.16.png and YES, firefox will connect to other sites ... and YES, chrome, safari and brave will connect to mikrotik .. (using chrome now) until FF 78.0.1 I was using FF for...
by eddieb
Sat Jul 11, 2020 6:49 pm
Forum: General
Topic: firefox 78.0.2 can not connect to mikrotik sites ...
Replies: 10
Views: 2347

Re: firefox 78.0.2 can not connect to mikrotik sites ...

tnx for the suggestion,
my firefox has DOH disabled ...
by eddieb
Sat Jul 11, 2020 3:07 pm
Forum: General
Topic: firefox 78.0.2 can not connect to mikrotik sites ...
Replies: 10
Views: 2347

firefox 78.0.2 can not connect to mikrotik sites ...

A couple of days ago I updated Firefox from 78.0.1 to 78.0.2 and now I am unable to connect to https://www.mikrotik.com and https://forum.mikrotik.com ...
Running FF on OSX 10.14.x
no problems with Safari, Chrome or Brave.
Any suggestions ?
I allready cleared FF caches etc ...
by eddieb
Fri Jul 10, 2020 5:50 pm
Forum: General
Topic: Unofficial IRC channel for Mikrotik users
Replies: 12
Views: 5539

Re: Unofficial IRC channel for Mikrotik users

we would be better of with a discord support server ...
by eddieb
Thu Jul 02, 2020 7:44 am
Forum: The Dude
Topic: the new dude is garbage
Replies: 4
Views: 1135

Re: the new dude is garbage

As I don't see this issue on my dude, I would like to know what platform you are running dude on. I am running dude on a dedicated RB750GR3 now, used to run inside VBOX on an OSX server for years. On VBOX I had issues with UDP, if the host system used the same ports, sometimes packets would never re...
by eddieb
Sun Jun 28, 2020 8:43 am
Forum: The Dude
Topic: (BUG) Dude Client crashing on device details and charts
Replies: 22
Views: 3622

Re: (BUG) Dude Client crashing on device details and charts

at least file a bug report to support@mikrotik.com ...
by eddieb
Wed Jun 03, 2020 11:39 am
Forum: Announcements
Topic: v6.47 [stable] is released!
Replies: 349
Views: 96785

Re: v6.47 [stable] is released!

updating to 6.47 went smooth ... from 6.46.5 to 6.47 done thru the dude ;-) No problems so far Still running OSX 10.14.x to be able to run the 32bit Dude in Dude4Mac 6.47.
by eddieb
Fri May 29, 2020 9:38 am
Forum: General
Topic: RouterBOARD 750G r3 no HW Offload ?
Replies: 10
Views: 1681

Re: RouterBOARD 750G r3 no HW Offload ?

tnx for pointing to this documentation.
I think I can live with no HW acceleration on my local dude server ...
by eddieb
Fri May 29, 2020 7:18 am
Forum: General
Topic: RouterBOARD 750G r3 no HW Offload ?
Replies: 10
Views: 1681

Re: RouterBOARD 750G r3 no HW Offload ?

somehow setting STP on the bridge to none made the H appear ... but WHY ? all my other type of devices are running RSTP and do show the H ... interface bridge port print detail Flags: X - disabled, I - inactive, D - dynamic, H - hw-offload 0 H interface=ether1 bridge=bridge priority=0x80 path-cost=1...
by eddieb
Thu May 28, 2020 9:42 pm
Forum: General
Topic: RouterBOARD 750G r3 no HW Offload ?
Replies: 10
Views: 1681

Re: RouterBOARD 750G r3 no HW Offload ?

I had port 5 connected and the H was not there ...
by eddieb
Thu May 28, 2020 9:24 pm
Forum: General
Topic: RouterBOARD 750G r3 no HW Offload ?
Replies: 10
Views: 1681

RouterBOARD 750G r3 no HW Offload ?

hi, I am running dude on a RouterBOARD 750G r3. Although it look like the device is capable to do hw offload it seems not to work ... system routerboard print routerboard: yes board-name: hEX model: RouterBOARD 750G r3 serial-number: xxxxxxxxxxxxxxxx firmware-type: mt7621L factory-firmware: 3.35 cur...
by eddieb
Wed Apr 15, 2020 1:14 pm
Forum: General
Topic: 6.46.5 dude agent memory leak ?
Replies: 0
Views: 1298

6.46.5 dude agent memory leak ?

Hi, I am running dude for years and it normally works fine. Last week I updated all devices from 6.46.3 to 6.46.5 and at first all looks ok. But, I am running 1 dude agent on a remote RB750GL that is monitoring a couple of devices behind it. It looks like it is running out of memory within 48hours. ...
by eddieb
Sun Apr 12, 2020 9:34 am
Forum: Beginner Basics
Topic: CRS125 Routing Performance
Replies: 9
Views: 2005

Re: CRS125 Routing Performance

Keep in mind that the CRS125 is a SWITCH ...
It can do wirespeed switching but all routing will go thru the not so strong CPU ...
IF you need routing, look for an other MT device, like a CCR or RB4000.
by eddieb
Sat Apr 11, 2020 11:43 am
Forum: Announcements
Topic: v6.46.5 [stable] is released!
Replies: 72
Views: 28920

Re: v6.46.5 [stable] is released!

updating to 6.46.5 went smooth ... from 6.46.3 to 6.46.5 done thru the dude ;-) No problems so far Still running OSX 10.14.x to be able to run the 32bit Dude in Dude4Mac 6.46.5 (which I created manually with some hints from Joshaven, thanks !) system auto upgrade works as designed. no problems. all ...
by eddieb
Thu Apr 02, 2020 8:17 am
Forum: Announcements
Topic: v6.46.4 [stable] is released!
Replies: 107
Views: 50152

Re: v6.46.4 [stable] is released!

smb on a security device is just crazy. It should be entirely removed from RouterOS. That's what nas devices are made for, firewalled behind the router.
+
by eddieb
Mon Mar 16, 2020 1:56 pm
Forum: Announcements
Topic: v6.46.4 [stable] is released!
Replies: 107
Views: 50152

Re: v6.46.4 [stable] is released!

We are looking into the communication issues with The Dude connecting through Agent. Other issues related with The Dude "std failure" message must be caused by old version on either The Dude server or RouterOS client. I did some testing : - upgraded dude-client to 6.46.4 - upgraded dude-server to 6...
by eddieb
Wed Mar 11, 2020 1:34 pm
Forum: Announcements
Topic: v6.46.4 [stable] is released!
Replies: 107
Views: 50152

Re: v6.46.4 [stable] is released!

hmm, upgrading is difficult ... running 6.46.3 dude-client in wine on OSX. Normally it auto upgrades if the dude server is upgraded but now it doesn't. Instructions say : upgrade dude-client manually ... That won't work ! Did anybody build a dude-client for OSX in wine ? I really don't want to buy a...
by eddieb
Wed Feb 26, 2020 9:19 am
Forum: Announcements
Topic: SwOS version 2.11 released!
Replies: 49
Views: 79721

Re: SwOS version 2.11 released!

just upgraded 4pc CSS106-5G-1S without any issues.
by eddieb
Sat Jan 18, 2020 10:30 am
Forum: Announcements
Topic: v6.46.2 [stable] is released!
Replies: 121
Views: 34620

Re: v6.46.2 [stable] is released!

updating to 6.46.2 went smooth ... from 6.46.1 to 6.46.2 done thru the dude ;-)
No problems so far
by eddieb
Tue Dec 24, 2019 10:45 am
Forum: Announcements
Topic: v6.46.1 [stable] is released!
Replies: 72
Views: 37404

Re: v6.46.1 [stable] is released!

@complex1 I also did check all my other devices, no problems on other architectures.
AND,
I just filed a ticket on this issue as it should be done ...
by eddieb
Mon Dec 23, 2019 11:20 pm
Forum: Announcements
Topic: v6.46.1 [stable] is released!
Replies: 72
Views: 37404

Re: v6.46.1 [stable] is released!

reading your comment throws up a few questions ... - DID anyone actually report this to support@mikrotik.com ? Just shouting here is useless, this is a userforum and not an official support channel ... And I totally disagree on your statement about testing, the guys at MT perform countless tests on ...
by eddieb
Mon Dec 23, 2019 4:39 pm
Forum: Announcements
Topic: v6.46.1 [stable] is released!
Replies: 72
Views: 37404

Re: v6.46.1 [stable] is released!

I'll have to admit ...
I just checked the "Check installation" and it also fails with "damaged routeros-powerpc package: bad image".
... no problems while running ...,
by eddieb
Mon Dec 23, 2019 3:17 pm
Forum: Announcements
Topic: v6.46.1 [stable] is released!
Replies: 72
Views: 37404

Re: v6.46.1 [stable] is released!

upgrading my RB1100 (PPC) went flawlessly ...
by eddieb
Wed Dec 18, 2019 9:01 am
Forum: Announcements
Topic: v6.46.1 [stable] is released!
Replies: 72
Views: 37404

Re: v6.46.1 [stable] is released!

updating to 6.46.1 went smooth ... from 6.46 to 6.46.1 done thru the dude ;-)
dude font problem fixed.
No problems so far
by eddieb
Tue Dec 17, 2019 1:59 pm
Forum: Wireless Networking
Topic: WIFI AP Mikrotik with Sonoff Devices
Replies: 16
Views: 3972

Re: WIFI AP Mikrotik with Sonoff Devices

Hey eddieB, I dont have any tasmanian devils or komodo dragons or their offspring Tasmoto's but just wanted to say thanks for assisting others and trying to solve their issues!!! Good on ya mate! Thanks for your fellow heads-up. Most of the so called problems are just configuration issues ... Keep ...
by eddieb
Fri Dec 13, 2019 7:58 am
Forum: Wireless Networking
Topic: WIFI AP Mikrotik with Sonoff Devices
Replies: 16
Views: 3972

Re: WIFI AP Mikrotik with Sonoff Devices

Here you go ... RouterOS stripped to essential # dec/13/2019 06:34:03 by RouterOS 6.46 # software id = TNXU-TVMJ # # model = RouterBOARD 962UiGS-5HacT2HnT /interface bridge add admin-mac=xx:xx:xx:xx:xx:xx auto-mac=no name=bridge /interface wireless channels add band=2ghz-g/n frequency=2412 list=2.4G...
by eddieb
Wed Dec 11, 2019 11:22 am
Forum: Wireless Networking
Topic: WIFI AP Mikrotik with Sonoff Devices
Replies: 16
Views: 3972

Re: WIFI AP Mikrotik with Sonoff Devices

Michael,

perhaps you should test your tasmota devices on a NON virtual AP and try if the problem still excists ...
I am running 10+ tasmota devices on my MT AP's and do not have any problems.
by eddieb
Sun Dec 08, 2019 11:03 am
Forum: Wireless Networking
Topic: HAP ac RB962UiGS-5HacT2HnT - client1<->AP<->client2 no more 150Mbit speed iperf3
Replies: 8
Views: 2406

Re: HAP ac RB962UiGS-5HacT2HnT - client1<->AP<->client2 no more 150Mbit speed iperf3

Using HAP AC (RB962) from Macbook to server on lan ... HAP AC runing on 40MHz channel width, great performance iperf3 -c 192.168.2.242 Connecting to host 192.168.2.242, port 5201 [ 4] local 192.168.2.220 port 62886 connected to 192.168.2.242 port 5201 [ ID] Interval Transfer Bandwidth [ 4] 0.00-1.00...
by eddieb
Fri Dec 06, 2019 9:38 am
Forum: Announcements
Topic: v6.46 [stable] is released!
Replies: 113
Views: 38897

Re: v6.46 [stable] is released!

Not so sure I want to upgrade, my RB450Gx4 is not a concern its my two CAPACs and the reports above of possible wifi issues????
running several HAP AC (RB962) on 6.46 ... dozens of IOS devices. I don't see any unexpected wifi reconnects ...
by eddieb
Thu Dec 05, 2019 9:05 am
Forum: Announcements
Topic: v6.46 [stable] is released!
Replies: 113
Views: 38897

Re: v6.46 [stable] is released!

updating to 6.46 went smooth ... from 6.45.7 to 6.46 done thru the dude ;-)
No problems so far
by eddieb
Sat Nov 02, 2019 12:50 pm
Forum: The Dude
Topic: Update wireless devices via The Dude
Replies: 4
Views: 3572

Re: Update wireless devices via The Dude

Can you tell us more about which packages can not be found ?
I use dude to upgrade all my devices and have at least one device running with separate package setup.
I could do some testing ...

Eddie
by eddieb
Fri Nov 01, 2019 9:27 am
Forum: Beginner Basics
Topic: I can't update CCR1036
Replies: 2
Views: 683

Re: I can't update CCR1036

at least you can remove all "mipsbe" packages. A CCR is "tile" and needs only "tile" packages ...
by eddieb
Wed Oct 30, 2019 9:09 am
Forum: Announcements
Topic: v6.45.7 [stable] is released!
Replies: 104
Views: 42565

Re: v6.45.7 [stable] is released!

updating to 6.45.7 went smooth ... from 6.45.6 to 6.45.7 done thru the dude ;-)
No problems so far
by eddieb
Tue Oct 29, 2019 9:02 pm
Forum: The Dude
Topic: Dude constantly freezing
Replies: 9
Views: 4839

Re: Dude constantly freezing

dude 6.45.6 is running here since it was available. No freezes at all ...
Uptime is almost 20 days now, had to reboot OSX a couple of weeks ago.
runs on CHR in VBOX on OSX.
by eddieb
Tue Oct 15, 2019 9:03 am
Forum: General
Topic: MacOS Catalina, iOS, Catalyst, SwiftUI & Wine
Replies: 179
Views: 65872

Re: MacOS Catalina, iOS, Catalyst, SwiftUI & Wine

nothing wrong with a windows program, but please make it 64bit ...
I don't need OSX stuff, but 64bit would be nice
by eddieb
Mon Oct 14, 2019 8:28 pm
Forum: General
Topic: MacOS Catalina, iOS, Catalyst, SwiftUI & Wine
Replies: 179
Views: 65872

Re: MacOS Catalina, iOS, Catalyst, SwiftUI & Wine

Dude currently no immediate plans. Run it in Windows.
Wow, that is bad, so I have to buy 1 windows machine to run dude ????
BAD BAD BAD
by eddieb
Fri Sep 13, 2019 9:56 am
Forum: Announcements
Topic: v6.45.6 [stable] is released!
Replies: 59
Views: 43627

Re: v6.45.6 [stable] is released!

updating to 6.45.6 went smooth ... from 6.45.5 to 6.45.6 done thru the dude ;-)
No problems so far
by eddieb
Sun Sep 08, 2019 8:51 pm
Forum: General
Topic: Winbox 64bit Version
Replies: 80
Views: 25897

Re: Winbox 64bit Version

for now I'll just don't upgrade MacOS ...
Winbox on Wine works fine but is indeed a 32bit app.
I noticed that some guys @MT also use MacOS, so lets hope they will compile a 64bit version just because they need that for themselves ..

Eddie
by eddieb
Tue Sep 03, 2019 7:49 pm
Forum: General
Topic: Feature Request: IPerf
Replies: 56
Views: 15276

Re: Feature Request: IPerf

-1

don't put development effort in tools that do not belong on a router !
by eddieb
Fri Aug 30, 2019 8:47 pm
Forum: Announcements
Topic: v6.45.5 [stable] is released!
Replies: 54
Views: 26039

Re: v6.45.5 [stable] is released!

updating to 6.45.5 went smooth ... from 6.45.3 to 6.45.5 with some help from the dude ;-)
No problems so far
by eddieb
Sun Aug 25, 2019 8:36 am
Forum: General
Topic: 100% CPU load in CCR 1009 [SOLVED]
Replies: 22
Views: 3830

Re: 100% CPU load in CCR 1009 [SOLVED]

running that much cpu on console tasks is weird. That is why I asked for a config. If you run a /export hide-sensitive all password will be hidden. You can wipe all the ppp user names to and leave one ... BUT, the best way is to make a suppout.rif and send it to support@mikrotik.com, they can see in...
by eddieb
Sat Aug 24, 2019 1:18 pm
Forum: General
Topic: 100% CPU load in CCR 1009 [SOLVED]
Replies: 22
Views: 3830

Re: 100% CPU load in CCR 1009 [SOLVED]

The screenshot you posted with the profile running was sorted by NAME, please post one sorted by CPU use ?
Pleas post your config ( /export hide-sensitive ).

(never saw this behavior on my 1009 ... )
by eddieb
Thu Aug 22, 2019 8:28 am
Forum: General
Topic: Winbox 64bit Version
Replies: 80
Views: 25897

Re: Winbox 64bit Version

As winbox user on OSX I really want a 64bit version too, I want to upgrade my macbook and it is complaining about unable to use the 32bit version of winbox (in wine) ..
A native version would be great too

Eddie
by eddieb
Mon Aug 19, 2019 11:48 am
Forum: Wireless Networking
Topic: Nefit Easy dropping from 2.4GHz ...
Replies: 0
Views: 648

Nefit Easy dropping from 2.4GHz ...

Hi, I have a strange issue with my Nefit Easy thermostat, it drops of my 2.4GHz and has lots of problems reconnecting ... running 3x hAP AC (RB962) with ROS-6.45.3 . 2.4GHz and 5GHz both running same SSID gateway to ISP is a CCR1009 on 6.45.3 about 20 different clients without problems (iPhone's/iPa...
by eddieb
Sun Jul 28, 2019 12:34 pm
Forum: Announcements
Topic: v6.45.2 [stable] is released!
Replies: 206
Views: 52577

Re: v6.45.2 [stable] is released!

updating to 6.45.2 went smooth ... from 6.45.1 to 6.45.2 with some help from the dude ;-)
No problems so far
by eddieb
Wed Jul 03, 2019 12:48 pm
Forum: Announcements
Topic: Winbox v3.19 released!
Replies: 33
Views: 21213

Re: Winbox v3.19 released!

Updated on OSX (Wine) thru tools menu,
works fine
by eddieb
Tue Jul 02, 2019 8:29 am
Forum: General
Topic: Firewall Causing Low Throughput
Replies: 20
Views: 3689

Re: Firewall Causing Low Throughput

please mention Router type,
Firewall packages are handled by the CPU, so on slower CPU models you might not get wire speed on your firewalled connection.
by eddieb
Mon Jul 01, 2019 8:01 pm
Forum: Announcements
Topic: v6.45.1 [stable] is released!
Replies: 416
Views: 125515

Re: v6.45.1 [stable] is released!

updating to 6.45.1 went smooth ... from 6.44.3 to 6.45.1 with some help from the dude ;-)
No problems so far
by eddieb
Sun May 12, 2019 8:56 am
Forum: General
Topic: L2TP VPN "L2TP UDP packet received from" over and over again. [SOLVED]
Replies: 14
Views: 4256

Re: L2TP VPN "L2TP UDP packet received from" over and over again. [SOLVED]

For people of the future googling this issue. There is not fix if you want to do L2TP, none that I found anyway. L2TP is great for users (laptops/remote desktops) needing to VPN, but not super solid for a site-to-site. I ended up getting an OVPN (native to Mikrotiks, both server and client) setup w...
by eddieb
Wed Apr 24, 2019 5:34 pm
Forum: Announcements
Topic: v6.44.3 [stable] is released!
Replies: 123
Views: 45054

Re: v6.44.3 [stable] is released!

updating to 6.44.3 went smooth ... from 6.44.2 to 6.44.3 with some help from the dude ;-)
No problems so far
by eddieb
Tue Apr 09, 2019 8:51 pm
Forum: Wireless Networking
Topic: hAP ac wireless problem
Replies: 8
Views: 1594

Re: hAP ac wireless problem

wireless speed issues were discussed here several times. Perhaps you should search this forum ...

like : viewtopic.php?f=7&t=132384
by eddieb
Thu Apr 04, 2019 1:18 pm
Forum: Announcements
Topic: v6.44.2 [stable] is released!
Replies: 67
Views: 20678

Re: v6.44.2 [stable] is released!

Update from 6.44.1 to 6.44.2 went smooth, no problems
by eddieb
Tue Apr 02, 2019 11:24 am
Forum: Wireless Networking
Topic: hAP AC
Replies: 8
Views: 1348

Re: hAP AC

as an hAP AC will max at about 600MBit thruput over the cpu, it totatlly depends on what your clients are using ...
IF they all use 10MBit streaming, you will be able to handle 60 users without problems
IF your clients use less concurrent bandwidth, you can handle more users ..
by eddieb
Wed Mar 27, 2019 9:11 pm
Forum: Wireless Networking
Topic: Hap ac & poor performance in 2.4GHz and 5GHz [SOLVED]
Replies: 20
Views: 3128

Re: Hap ac & poor performance in 2.4GHz and 5GHz [SOLVED]

If you use CAPSMAN and do NOT use local-forwarding, ALL traffic will need to be encrypted over a tunnel from the AP to the CAP. This wil hav huge impact on performance !!! If you use the hAP AC in stand-alone mode it will perform as designed. if you use ANY AP with CAPSMAN without local-forwarding y...
by eddieb
Sat Mar 16, 2019 6:13 pm
Forum: Announcements
Topic: v6.44.1 [stable] is released!
Replies: 86
Views: 28346

Re: v6.44.1 [stable] is released!

Is it possible to stay on the topic ? So, just what is in the changelog for this release.
If it is NOT in the changelog, it is NOT in this release. Please open a separate topic if needed.
by eddieb
Sat Mar 16, 2019 12:27 pm
Forum: Announcements
Topic: v6.44.1 [stable] is released!
Replies: 86
Views: 28346

Re: v6.44.1 [stable] is released!

Updated all my devices from 6.44 to 6.44.1 thru dude, no problems
ipsec site-to-site run fine
l2tp-ipsec roadwarrior dailin works fine

Eddie
by eddieb
Thu Mar 14, 2019 8:06 am
Forum: General
Topic: Another ROS upgrade, Another bricked hAP ac
Replies: 4
Views: 961

Re: Another ROS upgrade, Another bricked hAP ac

I have 10 hAP AC (RB962). Updating to every stable update for the last 2 years, never had any problems.
by eddieb
Tue Mar 05, 2019 3:35 pm
Forum: General
Topic: ROS 6.44 - VPN L2TP not working
Replies: 27
Views: 13740

Re: ROS 6.44 - VPN L2TP not working

that was FAST ! Emils thanks for your help !!! it seems the way dynamic peer configuration from L2TP server were added to the peers menu changed between 6.43.12 and 6.44 dynamic peers take precedence BEFORE static peer entries ... In my case there was a static default PEER with a password used by al...
by eddieb
Tue Mar 05, 2019 2:35 pm
Forum: General
Topic: ROS 6.44 - VPN L2TP not working
Replies: 27
Views: 13740

Re: ROS 6.44 - VPN L2TP not working

done ;-)
by eddieb
Tue Mar 05, 2019 2:15 pm
Forum: General
Topic: ROS 6.44 - VPN L2TP not working
Replies: 27
Views: 13740

Re: ROS 6.44 - VPN L2TP not working

I tried this beta but it did not solve my problems ... L2TP server with PSK is not working
by eddieb
Tue Mar 05, 2019 12:24 pm
Forum: General
Topic: ROS 6.44 - VPN L2TP not working
Replies: 27
Views: 13740

Re: ROS 6.44 - VPN L2TP not working

Hopefully we won't have to wait to long for this fix in current ...
by eddieb
Tue Mar 05, 2019 8:52 am
Forum: General
Topic: ROS 6.44 - VPN L2TP not working
Replies: 27
Views: 13740

Re: ROS 6.44 - VPN L2TP not working

@emils nice that this problem is allready known. in my case below is the relevant part of the config : /ip pool add name=dyn-vpn ranges=192.168.88.2-192.168.88.19 /ppp profile add change-tcp-mss=yes dns-server=192.168.88.1 local-address=192.168.88.1 \ name=ppp-in only-one=no remote-address=dyn-vpn u...
by eddieb
Mon Mar 04, 2019 9:05 pm
Forum: General
Topic: ROS 6.44 - VPN L2TP not working
Replies: 27
Views: 13740

Re: ROS 6.44 - VPN L2TP not working

Hmm, my site-to-site tunnels where converted correcty, but my roadwarrior PSK does not work anymore ...

"parsing packet failed, possible cause: wrong password"

until 6.43.12 it worked ok
by eddieb
Wed Feb 27, 2019 9:31 am
Forum: Announcements
Topic: v6.44 [stable] is released!
Replies: 219
Views: 53731

Re: v6.44 [stable] is released!

Updated all my devices from 6.43.12 to 6.44 thru dude, no problems

Eddie
by eddieb
Sat Feb 23, 2019 1:13 pm
Forum: RouterBOARD hardware
Topic: RB962UiGS-5HacT2HnT
Replies: 4
Views: 876

Re: RB962UiGS-5HacT2HnT

If you really want 4000 dns entries and 30.000 firewall rules, you should reconsider your choice for the RB962, which is not intended as enterprise gateway, it is a home access-point ...
by eddieb
Sat Feb 16, 2019 9:41 am
Forum: Announcements
Topic: v6.43.12 [stable] is released!
Replies: 49
Views: 20403

Re: v6.43.12 [stable] is released!

Upgraded from 6.43.11 -> 6.43.12
using dude to push the packages on

CCR1009-8G-1S (2x ipsec/l2tp site-to-site, dhcpd)
CRS125-24G-1S
RB1100
RB962UiGS-5HacT2HnT (10pc)
RB951
RB750GL
RB2011UAS-RM
CHR running dude (CHR running in VirtualBox on OSX)

without any issues
by eddieb
Wed Feb 06, 2019 8:57 am
Forum: Announcements
Topic: v6.43.11 [stable] is released!
Replies: 79
Views: 20684

Re: v6.43.11 [stable] is released!

Upgraded from 6.43.8 -> 6.43.11
using dude to push the packages on

CCR1009-8G-1S (2x ipsec/l2tp site-to-site, dhcpd)
CRS125-24G-1S
RB1100
RB962UiGS-5HacT2HnT (10pc)
RB951
RB750GL
RB2011UAS-RM
CHR running dude (CHR running in VirtualBox on OSX)

without any issues
by eddieb
Tue Jan 29, 2019 8:52 pm
Forum: General
Topic: [Formal Complaint] Support is ignoring my problem for 3 weeks
Replies: 28
Views: 3080

Re: [Formal Complaint] Support is ignoring my problem for 3 weeks

as this is a userforum, not a support forum, ALL communication to mikrotik should be addressed to them by e-mail ... preferably to support@mikrotik.com
by eddieb
Tue Jan 22, 2019 2:08 pm
Forum: General
Topic: 6.43.8 vulnerability or hack?
Replies: 31
Views: 11069

Re: 6.43.8 vulnerability

Perhaps you should not use the word vulnerability until it is confirmed ...
Until now you can only name it "hacked" ...
And the reason for that is not clear

ps,
send email to support@mikrotik.com for help, this is a user forum, not a support forum
by eddieb
Thu Jan 17, 2019 10:46 am
Forum: General
Topic: Sofware VLAN/Bridge on RuterOS explained.
Replies: 63
Views: 27880

Re: Sofware VLAN/Bridge on RuterOS explained.

Still trying to figure this out.
Is it possible to post a small working example ?
by eddieb
Thu Jan 17, 2019 9:04 am
Forum: Wireless Networking
Topic: Country Code [SOLVED]
Replies: 54
Views: 11595

Re: Country Code [SOLVED]

I noticed this behavior too ... MT devices (like my RB962's) do not transmit a country code. But, not all do Some DO, like FritzBox from AVM, Some Samsung device, Some Arcadyan device, Some Ziggo devices (transmit EU) Some DON'T, Like MT, ZTE devices, Belkin devices, TP-Link devices, Sitecom devices...
by eddieb
Wed Jan 16, 2019 10:20 pm
Forum: General
Topic: CCR Mikrotik Bandwidth Test - Urgent...-Important
Replies: 8
Views: 1477

Re: CCR Mikrotik Bandwidth Test - Urgent...-Important

You should sent support questions to support@mikrotik.com
by eddieb
Tue Jan 15, 2019 8:21 am
Forum: Announcements
Topic: SwOS version 2.9 released!
Replies: 72
Views: 37840

Re: SwOS version 2.9 released!

Updated all my RB260GS(CSS106-5G-1S) to 2.9 without any issues.
by eddieb
Wed Jan 09, 2019 9:16 pm
Forum: The Dude
Topic: The Dude IS Dead, really, isn't it?
Replies: 41
Views: 13978

Re: The Dude IS Dead, really, isn't it?

Too bad to read only negative experiances here. I run dude 6.43.8 on CHR in VM . It does what it has to do, runs for a couple of years now, updated with every release. Sometimes a manual vacuumdb is neccesary to get snmp counters running after an update. No further problems seen here, great function...
by eddieb
Wed Jan 09, 2019 8:54 pm
Forum: SwOS
Topic: SwOS on a CRS-125
Replies: 6
Views: 2865

Re: SwOS on a CRS-125

as the wifi interface is NOT on the same switch-chip as the eth ports, wifi will never have hardware-accelleration.
wifi will allways pass thru the cpu and is limited by the cpu performance
by eddieb
Wed Jan 09, 2019 8:45 pm
Forum: General
Topic: Apple devices flooding DHCP server
Replies: 15
Views: 3882

Re: Apple devices flooding DHCP server

same here, running ROS 6.43.8.
lots of Apple devices, all on dhcp.
Works as expected, no flooding seen here.
by eddieb
Fri Dec 21, 2018 11:18 pm
Forum: Announcements
Topic: v6.43.8 [stable] is released!
Replies: 169
Views: 48533

Re: v6.43.8 [stable] is released!

Updated from 6.43.7 to 6.43.8 without any problems.
Wifi works as expected, no problems
by eddieb
Fri Dec 14, 2018 11:13 am
Forum: Announcements
Topic: Product comparison matrix
Replies: 30
Views: 12981

Re: Product comparison matrix

There is column named "Number of DC inputs".
"Number of DC inputs" is not the same as dual power supply like the 2x 220v in some CCR types needed for redundant datacenter setups ...
by eddieb
Fri Dec 14, 2018 10:29 am
Forum: Announcements
Topic: Product comparison matrix
Replies: 30
Views: 12981

Re: Product comparison matrix

A tab with dual power supply possibility would be nice ...

And the same table with discontinued devices ...
by eddieb
Thu Dec 06, 2018 6:33 pm
Forum: Beginner Basics
Topic: Problem upgrade RouterOS CCR1036-12G-4S
Replies: 7
Views: 1049

Re: Problem upgrade RouterOS CCR1036-12G-4S

If you upload new versions from all additional packages together with the main package, you should be able to upgrade.
by eddieb
Wed Dec 05, 2018 8:47 am
Forum: Announcements
Topic: v6.43.7 [stable] is released!
Replies: 53
Views: 18333

Re: v6.43.7 [stable] is released!

Upgraded from 6.43.4 -> 6.43.7
using dude to push the packages on

CCR1009-8G-1S (2x ipsec/l2tp)
CRS125-24G-1S
RB1100
RB962UiGS-5HacT2HnT (10pc)
RB951
RB750GL
RB2011UAS-RM
CHR running dude

without any issues
by eddieb
Wed Nov 14, 2018 11:15 pm
Forum: General
Topic: TWO CCRs FULLY UPGRADED AND STILL EXPLOITED (ROOTED) [SOLVED]
Replies: 16
Views: 3217

Re: TWO CCRs FULLY UPGRADED AND STILL EXPLOITED (ROOTED) [SOLVED]

Yes,

it must have been exploited before the upgrades.
upgrading does not remove the exploits, it just fixes the holes.
IF your device is exploited, the only thing you can do is netinstall
by eddieb
Sat Oct 27, 2018 12:29 pm
Forum: The Dude
Topic: How to use it?
Replies: 2
Views: 2716

Re: How to use it?

Is there any new information on how the Syslog server Dev is going for The Dude? How do I go about specifying an IP range to be Blacklisted? "blacklisting" is done inside ROS on the device where the dude runs. Create /ip firewall address-list no-discover and put the ip's you don't want to be discov...
by eddieb
Fri Oct 19, 2018 11:43 am
Forum: The Dude
Topic: Dude 4.0Beta3 not working correctly over Wine
Replies: 6
Views: 3782

Re: Dude 4.0Beta3 not working correctly over Wine

4.0* is way too old and not supported for a long time, use the current version.
by eddieb
Thu Oct 18, 2018 5:06 pm
Forum: Announcements
Topic: v6.43.4 [stable] is released!
Replies: 78
Views: 31016

Re: v6.43.4 [stable] is released!

Upgraded thru DUDE without any issues

CCR1009-8G-1S (running multiple l2tp/ipsec tunnels)
RB1100
RB750GL
CRS125-24G-1S
RB962UiGS-5HacT2HnT (10x)
CHR running DUDE
by eddieb
Sat Oct 13, 2018 12:17 pm
Forum: General
Topic: Unable to get full gigabit speed on RB750Gr3
Replies: 33
Views: 10597

Re: Unable to get full gigabit speed on RB750Gr3

better test with http://www.dslreports.com/speedtest ...
gives you a better insight in what is happening
Screen Shot 2018-10-13 at 11.22.39.png
by eddieb
Wed Oct 03, 2018 3:04 pm
Forum: The Dude
Topic: Upgrade Wireless device on Dude
Replies: 17
Views: 5471

Re: Upgrade Wireless device on Dude

You might want to try to put just the routeros package on the dude.
the wireless packages is included in the Main package

I upgraded lots of devices thru the dude and that worked flawlessly

Eddie
by eddieb
Thu Sep 27, 2018 11:01 pm
Forum: General
Topic: Suspect script foun
Replies: 3
Views: 1323

Re: Suspect script foun

the script pointed to a u113.rsc that was in /file and an 113.sh schedule and an udp111 schedule that also seems removed....

the real "bad" stuff happens inside that scripts ...

do a netinstall on that device with all user passwords changed and double check your input rules
by eddieb
Fri Sep 21, 2018 11:07 am
Forum: The Dude
Topic: The Dude 6.40.8 - db failure: database disk image is malformed
Replies: 37
Views: 12620

Re: The Dude 6.40.8 - db failure: database disk image is malformed

FWIW

I updated Dude with every release, running 6.43.2 now.
Dude runs on a CHR vm over here.
Running for more than a year without problems.
Creating daily backups but never needed to restore
by eddieb
Thu Sep 20, 2018 1:44 pm
Forum: Announcements
Topic: v6.43.1 [stable] and v6.43.2 [stable] are released!
Replies: 186
Views: 52178

Re: v6.43.1 [stable] is released!

I just upgraded my RB2011UAS-RM from 6.43 to 6.43.1 ...
no problems.
by eddieb
Tue Sep 18, 2018 6:36 pm
Forum: General
Topic: NTFS support
Replies: 34
Views: 8768

Re: NTFS support

+1 for me too.
Separate packages to allow removal of this soho stuff I don't want.
by eddieb
Tue Sep 18, 2018 5:48 pm
Forum: Announcements
Topic: v6.43.1 [stable] and v6.43.2 [stable] are released!
Replies: 186
Views: 52178

Re: v6.43.1 [stable] is released!

Upgraded thru DUDE without any issues
CCR1009-8G-1S (running multiple l2tp/ipsec tunnels)
RB1100
RB750GL
CRS125
RB962UIGS (10x)
CHR running DUDE
by eddieb
Tue Sep 18, 2018 9:43 am
Forum: Announcements
Topic: Winbox vulnerability: please upgrade
Replies: 329
Views: 117438

Re: Winbox vulnerability: please upgrade

NEVER make updates automatic !
We want to control the moment of update and rebooting devices.
The way it is done now is sufficient, announcements thru mailing and on this forum is fine.
by eddieb
Sun Sep 16, 2018 2:15 pm
Forum: The Dude
Topic: Dude 6.41.2 lost SNMP interfaces
Replies: 26
Views: 7971

Re: Dude 6.41.2 lost SNMP interfaces

running

dude -> vacuum-db

solved this a couple of times for me
by eddieb
Sun Sep 16, 2018 12:46 pm
Forum: General
Topic: Mikrotik attacked. No idea how.
Replies: 7
Views: 1393

Re: Mikrotik attacked. No idea how.

- use remote syslog to analyze what is happening - use torch to see what is causing the amount of traffic - use packet sniffing for detailed packet info of course - do not use the admin user, create your own, disable admin - change passwords of ALL users after you think you have been compromised - u...
by eddieb
Mon Sep 10, 2018 6:31 pm
Forum: Announcements
Topic: v6.43 [current] is released!
Replies: 148
Views: 38684

Re: v6.43 [current] is released!

Upgraded without any issues
RB2011UAS
RB1100
RB750GL
CCR1009
CRS125
RB962UIGS (10x)
CHR
CHR-DUDE
by eddieb
Thu Sep 06, 2018 9:26 pm
Forum: General
Topic: RouterOS v6.42.7 showing old web interface
Replies: 5
Views: 1093

Re: RouterOS v6.42.7 showing old web interface

I have exactly the same on my RB1100 ...
by eddieb
Thu Sep 06, 2018 5:53 pm
Forum: General
Topic: CCR1009-8G-1S not discovered in winbox
Replies: 1
Views: 608

CCR1009-8G-1S not discovered in winbox

Hi, I loaded an export (only changed the management IP) of my RB2011UAS into my CCR1009-8G-1S all seems ok, and I can connect to the CCR in winbox on MAC and on IP .. BUT, in winbox discovery I see all my other MT devices except the CCR ... on the upstream CSR125 I notice : > ip neighbor print # INT...
by eddieb
Thu Aug 30, 2018 6:18 pm
Forum: RouterBOARD hardware
Topic: Suggestion: release routers with preinstalled Factory Software from Bugfix release chain
Replies: 6
Views: 1139

Re: Suggestion: release routers with preinstalled Factory Software from Bugfix release chain

Hmm,
you are right, next time I should put my glasses on before writing ...
Sorry
by eddieb
Thu Aug 30, 2018 6:07 pm
Forum: RouterBOARD hardware
Topic: Suggestion: release routers with preinstalled Factory Software from Bugfix release chain
Replies: 6
Views: 1139

Re: Suggestion: release routers with preinstalled Factory Software from Bugfix release chain

DON'T do this Mikrotik, very bad idea !!!
RC is development and should be treated as beta software !
by eddieb
Mon Aug 20, 2018 9:07 pm
Forum: Announcements
Topic: v6.42.7 [current] is released!
Replies: 159
Views: 40042

Re: v6.42.7 [current] is released!

Upgraded without problems ..

CRS125
CHR + Dude
RB750
RB951
RB962 (9x)
RB1100
RB2011 (2 IPSEC tunnels)
by eddieb
Sat Aug 18, 2018 10:00 am
Forum: Scripting
Topic: Blacklist Filter (Development Topic)
Replies: 191
Views: 38437

Re: Blacklist Filter (Development Topic)

Dave ?

I noticed a problem in my logging, is downloading the ?priority=1 not working anymore ?

Eddie
by eddieb
Sat Jul 14, 2018 9:33 am
Forum: Announcements
Topic: v6.42.6 [current]
Replies: 102
Views: 38486

Re: v6.42.6 [current]

Upgraded from .5 to .6 went smooth, no problems
by eddieb
Wed Jun 27, 2018 2:47 pm
Forum: Announcements
Topic: v6.42.5 [current]
Replies: 124
Views: 31935

Re: v6.42.5 [current]

Updated from 6.42.3 -> 6.42.5 without problems.
RB2011 (gateway with 2 ipsec/l2tp tunnels )
RB1100/CRS125/RB750
RB962(9pc)/RB951 accesspoints
CHR with dude
all went smooth, keep up the great work !
by eddieb
Mon Jun 25, 2018 9:45 am
Forum: Announcements
Topic: v6.42.4 [current]
Replies: 93
Views: 22782

Re: v6.42.4 [current]

All this complaining about how thing used to be has nothing to do with this release, please stay on topic !

I updated all my devices to this current release, no problems seen so far.
(RB2011/RB1100/RB962/CRS125/CHR)
by eddieb
Tue Jun 05, 2018 8:19 am
Forum: General
Topic: Add print server (printer support)
Replies: 140
Views: 72480

Re: Add print server (printer support)

NO, please DO NOT add this feature !!!
Let ROS do what it is supposed to do
by eddieb
Wed May 30, 2018 5:00 pm
Forum: Announcements
Topic: Winbox 3.14 released!
Replies: 77
Views: 36308

Re: Winbox 3.14 released!

the wireless menu not show and not work with this winbox
works fine here with winbox 3.14 to RB962 running ROS 6.42.3
by eddieb
Tue May 29, 2018 2:37 pm
Forum: Announcements
Topic: v6.43rc [release candidate] is released!
Replies: 557
Views: 144426

Re: v6.43rc [release candidate] is released!

That warning is perfectly clear. Unfortunately some people don't read.
by eddieb
Tue May 29, 2018 10:38 am
Forum: Wireless Networking
Topic: RB962UiGS-5HacT2HnT hAP ac capacity problem
Replies: 23
Views: 2228

Re: RB962UiGS-5HacT2HnT hAP ac capacity problem

please post an export of your config. please use a wired connection and retry dslreports what are your wireless conditions ? distance ? number of walls ? type of walls ? number of active clients ? Wired connection has 100 Mbit/s no problem. I have empty freq 5GHz about my home - 0 walls and router ...
by eddieb
Tue May 29, 2018 10:23 am
Forum: Wireless Networking
Topic: RB962UiGS-5HacT2HnT hAP ac capacity problem
Replies: 23
Views: 2228

Re: RB962UiGS-5HacT2HnT hAP ac capacity problem

please post an export of your config.

please use a wired connection and retry dslreports

what are your wireless conditions ? distance ? number of walls ? type of walls ? number of active clients ?
by eddieb
Mon May 28, 2018 4:46 pm
Forum: Wireless Networking
Topic: RB962UiGS-5HacT2HnT hAP ac capacity problem
Replies: 23
Views: 2228

Re: RB962UiGS-5HacT2HnT hAP ac capacity problem

registration does not mean actual wireless speed. it might be a lot less ...
Test your connection speed with http://www.dslreports.com/speedtest

And show us your config
by eddieb
Sat May 26, 2018 8:06 am
Forum: Announcements
Topic: v6.42.3 [current]
Replies: 80
Views: 29765

Re: v6.42.3 [current]

RB2011 / RB1100 / RB951 / RB962 (9pc) / CRS125 / CHR / CHR-Dude all updated to 6.42.3.
no problems
by eddieb
Thu May 24, 2018 8:06 am
Forum: Announcements
Topic: v6.43rc [release candidate] is released!
Replies: 557
Views: 144426

Re: v6.43rc [release candidate] is released!

Note that release candidate versions are published strictly for testing purposes and should not be used on production routers.
This quote says it all ...
rc releases are BETA releases, don't use it if you can't lose it !
by eddieb
Sat May 19, 2018 1:24 pm
Forum: General
Topic: SMB file sharing
Replies: 7
Views: 3498

Re: SMB file sharing

Use function separation ...
A ROUTER is made for routing/firewall
A FILESERVER/NAS is made for SMB (and perhaps other) Fileshareing options
by eddieb
Fri May 18, 2018 7:51 pm
Forum: General
Topic: Mikrotik RB962UiGS - slow gigabit speed
Replies: 11
Views: 2700

Re: Mikrotik RB962UiGS - slow gigabit speed

please post your config
/export hide-sensitive

Without a config we are not capable to help you
by eddieb
Fri May 18, 2018 9:44 am
Forum: Announcements
Topic: v6.42.2 [current]
Replies: 65
Views: 20028

Re: v6.42.2 [current]

upgraded from 6.42.1 to 6.42.2 on RB2011/RB1100/CRS125/RB962(9pc)/RB951/CHR/CHR-dude without any issues
by eddieb
Mon May 07, 2018 4:11 pm
Forum: The Dude
Topic: count number of rows matching in oid ?
Replies: 6
Views: 1977

Re: count number of rows matching in oid ?

tnx for thinking with me ...

any other suggestions ?
by eddieb
Thu May 03, 2018 8:19 pm
Forum: General
Topic: A new scan has started
Replies: 10
Views: 1784

Re: A new scan has started

It should not be THAT easy to get a ROS version ... without authentication

I notice the same IP sending syn packets to me too for the past 7 days at least ...
by eddieb
Thu May 03, 2018 4:14 pm
Forum: The Dude
Topic: count number of rows matching in oid ?
Replies: 6
Views: 1977

Re: count number of rows matching in oid ?

That is strange, it does here : snmpwalk -v2c -c public -On mt .1.3.6.1.4.1.14988.1.1.6.1 .1.3.6.1.4.1.14988.1.1.6.1.0 = Gauge32: 66 snmpwalk -v2c -c public -On mt .1.3.6.1.2.1.9999.1.1.6.4.1.4 | wc -l 66 the array .1.3.6.1.2.1.9999.1.1.6.4.1.4 includes the expired static leases static : snmpwalk -v...
by eddieb
Thu May 03, 2018 3:41 pm
Forum: The Dude
Topic: count number of rows matching in oid ?
Replies: 6
Views: 1977

Re: count number of rows matching in oid ?

That wil give me the total number, including the expired ... I want the total for active static and active dynamic
by eddieb
Thu May 03, 2018 12:46 pm
Forum: The Dude
Topic: count number of rows matching in oid ?
Replies: 6
Views: 1977

count number of rows matching in oid ?

Hi, I want to count the number of dhcp leases in ROS, for now I use array_find(oid_column("1.3.6.1.2.1.9999.1.1.6.4.1.4"),"dynamic (2)") but array_find only returns the number of the first row in the array where it finds "dynamic (2)". So, great to find IF there are any dynamic leases ... It returns...
by eddieb
Thu May 03, 2018 11:58 am
Forum: Announcements
Topic: v6.43rc [release candidate] is released!
Replies: 557
Views: 144426

Re: v6.43rc [release candidate] is released!

problems should be reported to support@mikrotik.com not on this forum.
by eddieb
Wed May 02, 2018 10:26 pm
Forum: The Dude
Topic: add 2 lines in graphs together ?
Replies: 8
Views: 1871

Re: add 2 lines in graphs together ?

Found it ...
not that hard after all, tnx for the suggestions.
create a datasource for device "none" and put some function code inside
create a graph for this new datasource
Screen Shot 2018-05-02 at 21.24.28.png
by eddieb
Wed May 02, 2018 7:08 pm
Forum: The Dude
Topic: add 2 lines in graphs together ?
Replies: 8
Views: 1871

Re: add 2 lines in graphs together ?

The 2 OID are from different devices ...
I know that would be the direction to look into, but I can not find how to add snmp oid from 2 (or more) devices into 1 datasource ...
by eddieb
Wed May 02, 2018 4:31 pm
Forum: The Dude
Topic: add 2 lines in graphs together ?
Replies: 8
Views: 1871

Re: add 2 lines in graphs together ?

The screenshot below shows a graph with 2 lines from separate devices. I want to stack them, not to show them side by side ... I can not find a wy to do that ...
So 1 line with the total of both devices added together.
Screen Shot 2018-05-02 at 15.28.45.png
by eddieb
Wed May 02, 2018 2:05 pm
Forum: The Dude
Topic: add 2 lines in graphs together ?
Replies: 8
Views: 1871

Re: add 2 lines in graphs together ?

Hi,

The 2 lines in one graph is not a problem, but I want to stack the values to see a maximum in the graph ...
by eddieb
Wed May 02, 2018 8:44 am
Forum: The Dude
Topic: add 2 lines in graphs together ?
Replies: 8
Views: 1871

add 2 lines in graphs together ?

Hi,
I have graphs of connected wifi cients per AP.
I want to add the values togehter into one line in a graph to see the total of connected wifi users in my network.
Any suggestions in how to add those values together ?

regards,

Eddie
by eddieb
Thu Apr 26, 2018 8:24 pm
Forum: General
Topic: Urgent feature request: Bind IP services to a specific IP / Interface
Replies: 4
Views: 1116

Re: Urgent feature request: Bind IP services to a specific IP / Interface

+1 for this request.
It should be possible to bind IP services to a specific IP and/or a specific interface.
We do so on our linux servers allways !
by eddieb
Thu Apr 26, 2018 4:06 pm
Forum: Announcements
Topic: v6.42.1 [current]
Replies: 272
Views: 59430

Re: v6.42.1 [current]

No problems with 6.42.1 over here, tnx for the great work MT !
by eddieb
Tue Apr 24, 2018 2:29 pm
Forum: Announcements
Topic: Advisory: Vulnerability exploiting the Winbox port [SOLVED]
Replies: 204
Views: 194968

Re: Advisory: Vulnerability exploiting the Winbox port

always blame the knife if you cut yourself ...
by eddieb
Tue Apr 24, 2018 1:49 pm
Forum: Beginner Basics
Topic: upgrading RouterOS
Replies: 8
Views: 1566

Re: upgrading RouterOS

coming from 6.35 the easiest way to me seems to update to 6.40.8 in the bugfix channel.
Depending on the complexity of your config 6.40.8 still has the old master-port while 6.41+ has the new bridge implementation.
If updating to 6.40.8 went fine you might try 6.42.1 ...
by eddieb
Mon Apr 23, 2018 5:44 pm
Forum: Announcements
Topic: v6.42.1 [current]
Replies: 272
Views: 59430

Re: v6.42.1 [current]

upgraded RB750, RB962 (8pc), RB1100, RB2011, CRS125, CHR, CHR (dude) without issues, tnx for the fast fix !
by eddieb
Sat Apr 21, 2018 12:43 pm
Forum: Beginner Basics
Topic: Mikrotik vulnerability
Replies: 16
Views: 3926

Re: Mikrotik vulnerability

Problems like this should be reported directly to support@mikrotik.com
NEVER allow management on your devices from internet. Fix your firewall.
Pick a strong password, took only 3 seconds according to your log ...
by eddieb
Thu Apr 19, 2018 5:57 pm
Forum: Announcements
Topic: v6.42 [current]
Replies: 147
Views: 37910

Re: v6.42 [current]

DHCP client and server work as expected. PPPoE client also ... No problems on my RB2011 here
by eddieb
Tue Apr 17, 2018 5:51 pm
Forum: Announcements
Topic: v6.42 [current]
Replies: 147
Views: 37910

Re: v6.42 [current]

Updated RB1100, RB2011, CRS125, RB962 (hAP AC) (5x) without any issues, 2.4G/5G wifi work as expected, thanks !
by eddieb
Sat Apr 14, 2018 10:24 am
Forum: Announcements
Topic: v6.42rc [release candidate] is released!
Replies: 538
Views: 121610

Re: v6.42rc [release candidate] is released!

There is NO 6.42
Only 6.42rc [release candidate]
RC are BETA versions that can be used to TEST certain new (or fixed) features.
BETA software should not be run on critical devices, just on test networks.
by eddieb
Tue Apr 10, 2018 5:20 pm
Forum: Beginner Basics
Topic: Dutch tutorials
Replies: 5
Views: 966

Re: Dutch tutorials

Nice site plisken, seen it before, good to see updates !
Keep up the good work !
by eddieb
Tue Apr 10, 2018 10:19 am
Forum: Announcements
Topic: v6.41.4 [current]
Replies: 37
Views: 14018

Re: v6.41.4 [current]

Updated RB2011UAS, RB750GL, RB1100, RB962 (9x), CRS125 and CHR running Dude without any issues
by eddieb
Sat Mar 31, 2018 7:48 pm
Forum: Announcements
Topic: Urgent security advisory
Replies: 110
Views: 103282

Re: Urgent security advisory

I fully agree, upgrading is part of general maintenance and should always be done in a controlled matter ...
Maintenance takes time and cost money.
by eddieb
Mon Mar 26, 2018 12:52 pm
Forum: Wireless Networking
Topic: hAP ac 5GHz max speed
Replies: 52
Views: 15267

Re: hAP ac 5GHz max speed

config is pretty default ... plain accespoint, all interfaces in 1 bridge, no firewall rules, dhcp from core-router /interface wireless set [ find default-name=wlan1 ] band=2ghz-g/n channel-width=20/40mhz-eC \ disabled=no distance=indoors frequency=2462 mode=ap-bridge \ security-profile=home ssid=ho...
by eddieb
Mon Mar 26, 2018 11:46 am
Forum: Scripting
Topic: Blacklist Filter update script
Replies: 632
Views: 134719

Re: Blacklist Filter update script

Thanks for all the effort you put into this Dave.
I was using your service for over a year and it helped me to keep my network save.
I surely would consider a small subscription fee to keep it

Eddie
by eddieb
Mon Mar 26, 2018 11:37 am
Forum: Wireless Networking
Topic: hAP ac 5GHz max speed
Replies: 52
Views: 15267

Re: hAP ac 5GHz max speed

Hi, I can confirm that the hAP AC connects with 3 chans to a newer MacBookPro on 1G+ Thruput tested with iperf3 from this MBP to a server on the wired part of my local network On 1GB wire I get approx 960Mbit/s On 5GHz wifi I get approx 530Mbit/s This 530Mbit/s seems about the max because the hAP AC...
by eddieb
Tue Mar 13, 2018 8:42 am
Forum: Announcements
Topic: v6.41.3 [current]
Replies: 139
Views: 39219

Re: v6.41.3 [current]

strods - I see this SIM option on my RB2011 and CRS125. On the RB1100 it is not visible.
by eddieb
Mon Mar 12, 2018 9:12 pm
Forum: Announcements
Topic: v6.41.3 [current]
Replies: 139
Views: 39219

Re: v6.41.3 [current]

upgraded from 6.41.2 -> 6.41.3 without any issues on RB962 / RB1100 / RB2011 / CRS125

tnx
by eddieb
Tue Feb 27, 2018 3:33 pm
Forum: SwOS
Topic: RB260GS does not like version 2.7
Replies: 18
Views: 7304

Re: RB260GS does not like version 2.7

I upgraded my 4 pcs of RB260GS to 2.7 without any problems, very nice switches, working fine
by eddieb
Mon Feb 26, 2018 3:32 pm
Forum: Announcements
Topic: v6.40.6 [bugfix] is released!
Replies: 58
Views: 20197

Re: v6.40.6 [bugfix] is released!

Hmm, problem. Eddie Please provide support output file to suport@mikrotik.com so we could compare that configuration to see why it would not work in v6.40.6 I will create them in a couple of hours, the hAP AC are manged by CAPSMAN in my 2011, do you need the supout from the hAP AC, the 2011 or both...
by eddieb
Mon Feb 26, 2018 1:33 pm
Forum: Announcements
Topic: v6.40.6 [bugfix] is released!
Replies: 58
Views: 20197

Re: v6.40.6 [bugfix] is released!

Hmm, problem. I upgraded my 3 hAP AC from 6.39.3 to 6.40.6 .. All seemed OK but the office W10 laptop refused to connect to the wifi ... To bad there is no useable logging, the MT logging just says station leaving and the W10 logging says "unable to connect" ... I donwgraded to 6.39.3 and now the W1...
by eddieb
Wed Feb 14, 2018 2:05 pm
Forum: Announcements
Topic: v6.41.2 [current]
Replies: 125
Views: 38025

Re: v6.41.2 [current]

updated my RB2011UAS from 6.40.5 to 6.41.2 ...
everything went smooth.
2 IPSEC site-to-site tunnels
DHCP and DNS server
PPPOE on wan

look fine here
by eddieb
Thu Jan 04, 2018 12:53 pm
Forum: Wireless Networking
Topic: Multiple APs with ethernet backhaul home network advice.
Replies: 7
Views: 2274

Re: Multiple APs with ethernet backhaul home network advice.

hmm,

running capsman with 3x hAP AC here without problems, almost only Apple devices here ...
At our computer club meeting (4 times a year) I run 5x hAP AC to handle about 300 iOS devices in a community center, no problems
Great devices, you just need to know how to configure them !

Eddie
by eddieb
Wed Jan 03, 2018 12:45 pm
Forum: Wireless Networking
Topic: Wireless issues - can't figure out why
Replies: 7
Views: 1641

Re: Wireless issues - can't figure out why

Which ROS version are you running ? I have 3x 962's running here without issues ... needed to set the DHCP lease for wireless devices to 8h, shorter gave me problems with disconnecting iOS devices due to bad performance issues mentioned here in the forums, all my 962's are running ROS 6.39.3 (bugfix...
by eddieb
Fri Dec 15, 2017 10:06 am
Forum: Wireless Networking
Topic: Problem with haP AC
Replies: 9
Views: 1695

Re: Problem with haP AC

I have 5 of these RB962 devices running as AP, they work great, wireless coverage is fine, handling 200-300 clients simultaniously without problems.
by eddieb
Thu Oct 26, 2017 8:44 am
Forum: The Dude
Topic: random probe re-appearing after restart dude
Replies: 0
Views: 527

random probe re-appearing after restart dude

hi,

As I don't want the random (50:50) probe in my dude maps, I deleted it from the probe list.
After restarting dude 6.40.4 it magicly re-appears, is there a way to stop this ?

regards,

Eddie
by eddieb
Wed Oct 04, 2017 12:27 pm
Forum: Announcements
Topic: v6.40.4 [current]
Replies: 103
Views: 31884

Re: v6.40.4 [current]

CHR dude 6.40.3 -> 6.40.4

all SNMP interface traffic reads are gone, showing ?/?
by eddieb
Fri Sep 01, 2017 9:44 pm
Forum: Announcements
Topic: v6.40.3 [current]
Replies: 95
Views: 32044

Re: v6.40.3 [current]

upgraded RB2011UAS (gateway running CAPSMAN), 8x RB962 (CAP), CRS125, RB1100 without noticable problems.
by eddieb
Fri Aug 18, 2017 4:10 pm
Forum: General
Topic: Mikrotik Chat
Replies: 37
Views: 8975

Re: Mikrotik Chat

irc.freenode.net ##mikrotik
by eddieb
Thu Jul 20, 2017 9:16 am
Forum: Scripting
Topic: Blacklist Filter update script
Replies: 632
Views: 134719

Re: Blacklist Filter update script

Morning,

tnx for explaining the script rights issue, to bad we are struggling with that, for now it works here.

@Dave
I noticed the script got updated to 2.0.3 in the past 12 hours, it would be nice to see some kind of changelog if possible ?

Keep up the good work !

Eddie
by eddieb
Wed Jul 19, 2017 8:36 am
Forum: Scripting
Topic: Blacklist Filter update script
Replies: 632
Views: 134719

Re: Blacklist Filter update script

Hi Dave, tnx for the updates, it seems to work fine on my RB2011 and my RB1100. But, I have a very strange problem on my test VM CHR ... Until 2.0.1 it worked fine, with the latest it wipes my blacklistUpdate and blacklistScriptUpdater ... they are EMPTY ... Screen Shot 2017-07-19 at 07.29.28.png in...
by eddieb
Tue Jul 18, 2017 7:41 pm
Forum: Scripting
Topic: Blacklist Filter update script
Replies: 632
Views: 134719

Re: Blacklist Filter update script

Hi Dave,
tnx for the hint, that did it. For some reason the scripts where created with only read, write, test ...

It works now

Eddie
by eddieb
Tue Jul 18, 2017 10:35 am
Forum: Scripting
Topic: Blacklist Filter update script
Replies: 632
Views: 134719

Re: Blacklist Filter update script

Hi Dave, first my compliments for your work and all the effort you put into this !!! I have updated a couple of different devices and most went fine without a glitch. Now I am struggling with a RB2011UiAS-2HnD and it does not work ... I installed the blinstall script, run it and the 2 scripts and 2 ...
by eddieb
Sat Jul 01, 2017 11:00 am
Forum: Scripting
Topic: Blacklist Filter update script
Replies: 632
Views: 134719

Re: Blacklist Filter update script

tnx,

scripting can be a pain, sometimes it just does not work ...
Count filterBlacklist=0 rawBlacklist=30
it works ;-)
by eddieb
Sat Jul 01, 2017 10:37 am
Forum: Scripting
Topic: Blacklist Filter update script
Replies: 632
Views: 134719

Re: Blacklist Filter update script

Collecting how many packets are blocked by the Blacklist: #### Share how many packets are blocked by the Blacklist on your device :local filterBlacklist "0"; :local rawBlacklist "0"; :if ([:len [/ip firewall filter find src-address-list="dynamicBlacklist"]] != 0) do={set filterBlacklist [/ip firewa...
by eddieb
Mon Jun 19, 2017 11:28 am
Forum: General
Topic: Which USB 4G LTE works ??? Please update wiki ...
Replies: 1
Views: 783

Which USB 4G LTE works ??? Please update wiki ...

ls, I am looking for a working USB 4G LTE stick. The wiki seems outdated, many of the mentioned devices are not availiable anymore. Please update the wiki with user reports on working USB sticks. Even this forum is unclear, only a few reports. Please post you reports for us who are searching. People...
by eddieb
Fri Jun 09, 2017 9:11 am
Forum: Scripting
Topic: Blacklist Filter update script
Replies: 632
Views: 134719

Re: Blacklist Filter update script

Hi Dave, thanks for your response. It was a bit complex but I did manage to add the subnet in a whitelist and that works for now... I am aware of the problems that might cause such a whitelist. In this case the subnet is from a local provider with many customers fighting spam ... sometimes one of th...
by eddieb
Thu Jun 08, 2017 8:37 pm
Forum: Scripting
Topic: Blacklist Filter update script
Replies: 632
Views: 134719

Re: Blacklist Filter update script

Hi Dave, I use your dynamic blacklist and it suits well. For some reason a subnet from which I really need to use 1 address from appeared in one of the lists loaded into dynamicBlacklist ... It would be a great help if I could whitelist a subnet inside the script somehow ... Keep up the great work E...
by eddieb
Sat Apr 29, 2017 3:22 pm
Forum: Announcements
Topic: v6.39 [current]
Replies: 89
Views: 40659

Re: v6.39 [current]

Upgraded my 2011 to 6.39 without problems.
- IPSEC-IPSEC tunnel works,
- IPSEC-L2TP dailin works,
- Firewall rulez works,
- DHCP works,
- CAPS-MAN (2x 962, 1x 2011) works ...
no problems so far

E.
by eddieb
Fri Oct 07, 2016 10:50 pm
Forum: Announcements
Topic: v6.37.1 [current] is released!
Replies: 144
Views: 44776

Re: v6.37.1 [current] is released!

I had the problem of add a new static DNS entry and then all connection (web, email, etc) redirect to the address. This generate a big problem in a company with computers DNS cache's. /ip dns set allow-remote-requests=yes cache-size=10240KiB servers=\ 8.8.8.8,8.8.4.4 add address=192.168.x.88 name=l...
by eddieb
Wed Jun 29, 2016 4:37 pm
Forum: General
Topic: stop MT triggering CISCO BPDU guard
Replies: 3
Views: 2862

Re: stop MT triggering CISCO BPDU guard

We just configured a CRS-125 as switch using the examples on http://wiki.mikrotik.com/wiki/Manual:CRS_examples ... Config is like http://www.breekeenbeen.nl/2014/12/11/mikrotik-vlan-switching-without-bridging/ the acces port is triggering the BPDU guard on an attached cisco switch. We did some packe...
by eddieb
Thu Dec 03, 2015 10:17 pm
Forum: General
Topic: stop MT triggering CISCO BPDU guard
Replies: 3
Views: 2862

stop MT triggering CISCO BPDU guard

Hi, we are connecting some CRS-125 configured as switches to an CISCO switch. both switches should NOT see each other switch net works ... edge-edge connection ... But, we are not able to stop switch packets on the connection, the Cisco keeps shutting the port as bpdu-guard kicks in. What setting do...