Community discussions

MikroTik App

Search found 234 matches

by eddieb
Mon May 03, 2021 6:18 pm
Forum: Announcements
Topic: SwOS version 2.13 released!
Replies: 29
Views: 4392

Re: SwOS version 2.13 released!

I managed to get my 4 CSS106 switches to upgrade to FW2.13 ... the culprit seems that (at least mine) don't like to get upgraded while having allowing access only from VLAN 99 ... during upgrade it somewhere looses the VLAN config and it wants to connect over default vlan ( 1 ) ... disabling the acc...
by eddieb
Mon May 03, 2021 10:47 am
Forum: Announcements
Topic: SwOS version 2.13 released!
Replies: 29
Views: 4392

Re: SwOS version 2.13 released!

stil no luck here...
I tried with and without rstp enabled.
right after power cycling, always the same result, the new version is detected and the process seems to start.
Failing after a couple of seconds ... (into FW2.0) and need to power-cycle to get back into FW2.12
by eddieb
Sun May 02, 2021 10:08 am
Forum: The Dude
Topic: Use Dude to monitor linux server and/or Proxmox
Replies: 4
Views: 517

Re: Use Dude to monitor linux server and/or Proxmox

This is not a dude issue, if you run a snmpwalk on your local machine you will probably see the same.
You need to configure the snmpd on the machine that you want to monitor to show you more info.
Default it just shows some basic info.
by eddieb
Sat May 01, 2021 9:40 am
Forum: Announcements
Topic: SwOS version 2.13 released!
Replies: 29
Views: 4392

Re: SwOS version 2.13 released!

Let me explain a little bit more ... I am running vlan 99 on my uplink for management traffic. So the switches have an address in my management vlan. I tried to upgrade from a W10 laptop connected to that vlan. The default gateway in that vlan has internet access. Normal ROS devices can upgrade dire...
by eddieb
Fri Apr 30, 2021 10:32 am
Forum: Announcements
Topic: SwOS version 2.13 released!
Replies: 29
Views: 4392

Re: SwOS version 2.13 released!

tnx for the suggestion @EdPa the switch was running rstp and I disabled it. same result. The upload process starts and fails. devices reboots into FW2.0. after power cycle it is back in 2.12 and running. I tried to manually upload the new fw, same result. device reboots into FW2.0 ... after power cy...
by eddieb
Fri Apr 30, 2021 7:57 am
Forum: Announcements
Topic: SwOS version 2.13 released!
Replies: 29
Views: 4392

Re: SwOS version 2.13 released!

Did You get the switch to download and install? Or did You download the file and installed manually? I have one CSS106-1G-4P-1S, and the upgrade went fine. The switch downloaded and installed the update. I tried both ways, downloading thru the switch starts and after a couple of seconds fails ... r...
by eddieb
Thu Apr 29, 2021 11:12 am
Forum: Announcements
Topic: SwOS version 2.13 released!
Replies: 29
Views: 4392

Re: SwOS version 2.13 released!

uploading firmware to the CSS106 also fails, device reboots into factory firmware.
after powercycle the swith is back in 2.12 ...
by eddieb
Thu Apr 29, 2021 9:36 am
Forum: Announcements
Topic: SwOS version 2.13 released!
Replies: 29
Views: 4392

Re: SwOS version 2.13 released!

my 1st attempt to upgrade a RB260GS(CSS106-5G-1S) from 2.12 to 2.13 thru a browser failed.
Upgrade was visible and started, device prompted "upgrade failed" and did reset tot firmware 2.0 and lost normal settings ...
by eddieb
Fri Apr 23, 2021 6:13 pm
Forum: Announcements
Topic: v6.48.2 [stable] is released!
Replies: 130
Views: 20674

Re: v6.48.2 [stable] is released!

No, no problems here, on all my devices the security package is enabled
Thanks, but II think you have not understand the problem:
you have try to downgrade/upgrade 6.48.2 with security ON PURPOSE disabled?
why should I ? Everything is running fine, no need to do such a thing.
by eddieb
Fri Apr 23, 2021 5:03 pm
Forum: Announcements
Topic: v6.48.2 [stable] is released!
Replies: 130
Views: 20674

Re: v6.48.2 [stable] is released!

No, no problems here, on all my devices the security package is enabled
by eddieb
Mon Apr 19, 2021 3:25 pm
Forum: Announcements
Topic: v6.48.2 [stable] is released!
Replies: 130
Views: 20674

Re: v6.48.2 [stable] is released!

On my rb750gr3 no problems with system health ... works fine in winbox
by eddieb
Wed Apr 14, 2021 11:06 am
Forum: Announcements
Topic: v6.48.2 [stable] is released!
Replies: 130
Views: 20674

Re: v6.48.2 [stable] is released!

Upgrading all my devices from 6.48.1 to 6.48.2 went smooth, no problems.
by eddieb
Sun Apr 11, 2021 9:56 am
Forum: The Dude
Topic: Mikrotik Dude Server History Disk Space issue
Replies: 7
Views: 779

Re: Mikrotik Dude Server History Disk Space issue

I had dude running on CHR until 2 years ago, It worked ...
I switched to a dedicated RB 750G r3 with an 64GiB SDcard mounted on /dude.
Less problems with upgrading and no issues with unstable host systems ...
by eddieb
Sat Apr 10, 2021 5:47 pm
Forum: The Dude
Topic: Mikrotik Dude Server History Disk Space issue
Replies: 7
Views: 779

Re: Mikrotik Dude Server History Disk Space issue

Of course not, but you probably stored the config and database on a part of the memory that is not intended for this use and is wiped during reboot ... If the device does not have enough storage you should use external storage for dude, it can use al lot of storage ... If there is no SD, you might w...
by eddieb
Mon Mar 29, 2021 12:48 pm
Forum: Useful user articles
Topic: Tool: Using Splunk to analyse MikroTik logs 3.2 (Graphing everything) Topic is solved
Replies: 401
Views: 178616

Re: Tool: Using Splunk to analyse MikroTik logs 3.2 (Graphing everything) Topic is solved

2b) Then select what modules to log. I do suggest that you send all DHCP logs including debug and all other logs that are not debug. It is very important to name the prefix like this "MikroTik" and not "mikrotik" or some other. Splunk uses the MikroTik prefix to find out what ty...
by eddieb
Mon Mar 29, 2021 12:12 pm
Forum: Useful user articles
Topic: Tool: Using Splunk to analyse MikroTik logs 3.2 (Graphing everything) Topic is solved
Replies: 401
Views: 178616

Re: Tool: Using Splunk to analyse MikroTik logs 3.2 (Graphing everything) Topic is solved

I noticed your change on the main topic.
you need to modify the line for the webinterface ;-)
by eddieb
Mon Mar 29, 2021 11:20 am
Forum: Useful user articles
Topic: Tool: Using Splunk to analyse MikroTik logs 3.2 (Graphing everything) Topic is solved
Replies: 401
Views: 178616

Re: Tool: Using Splunk to analyse MikroTik logs 3.2 (Graphing everything) Topic is solved

tnx, I updated the script ;-) btw, I ran into the 500MB free licence limit the 2nd day it was running ... As I am running dude with SNMP monitoring, the rule /system logging add action=logserver prefix=MikroTik topics=!debug,!packet to log everything produces a LOT of snmp log traffic. I had to chan...
by eddieb
Mon Mar 29, 2021 11:11 am
Forum: The Dude
Topic: Mikrotik Dude Server History Disk Space issue
Replies: 7
Views: 779

Re: Mikrotik Dude Server History Disk Space issue

I run dude on a dedicated RB 750G r3 with an 64GiB SDcard mounted on /dude.
all dude data is stored on that SDcard
by eddieb
Fri Mar 26, 2021 5:22 pm
Forum: Useful user articles
Topic: Tool: Using Splunk to analyse MikroTik logs 3.2 (Graphing everything) Topic is solved
Replies: 401
Views: 178616

Re: Tool: Using Splunk to analyse MikroTik logs 3.2 (Graphing everything) Topic is solved

Hi Jotne, a couple of days ago I discoverd that running splunk in docker on my Synology NAS was way easier than I ever thought ... Everything runs smooth but I have 1 question about NTP/SNTP, all my "ntp slave" devices run SNTP instead of NTP, NTP only runs on my borderrouter ... All devi...
by eddieb
Wed Mar 24, 2021 8:43 am
Forum: General
Topic: PWR-Line AP - what firmware version is usable? Neighbor visible yet no IP traffic
Replies: 1
Views: 359

Re: PWR-Line AP - what firmware version is usable? Neighbor visible yet no IP traffic

I am running a 2 pwr-line-ap connection for weeks now on 6.48.1 without any problems
by eddieb
Sat Mar 06, 2021 6:39 pm
Forum: The Dude
Topic: Dude dude-6.48.1 will not install on hAP AC2
Replies: 10
Views: 806

Re: Dude dude-6.48.1 will not install on hAP AC2

Keep in mind that running dude to monitor a large environment takes a lot of resources ...
A hAP AC2 is intended to be a wifi accesspoint for home use.
you might want to lookout for a dedicated "stronger" device as your network grows ...
by eddieb
Sat Mar 06, 2021 6:28 pm
Forum: The Dude
Topic: Dude dude-6.48.1 will not install on hAP AC2
Replies: 10
Views: 806

Re: Dude dude-6.48.1 will not install on hAP AC2

please post the first lines of your log after rebooting ?
there should be some info about that file
by eddieb
Sat Mar 06, 2021 5:50 pm
Forum: The Dude
Topic: Dude dude-6.48.1 will not install on hAP AC2
Replies: 10
Views: 806

Re: Dude dude-6.48.1 will not install on hAP AC2

What version is the rest of the hAP AC2 running ?
by eddieb
Sat Mar 06, 2021 5:10 pm
Forum: The Dude
Topic: Dude dude-6.48.1 will not install on hAP AC2
Replies: 10
Views: 806

Re: Dude dude-6.48.1 will not install on hAP AC2

that means the dude database must be stored on some external media, it won't fit on the build-in memory ...
The package should always be installed in /files
by eddieb
Sat Mar 06, 2021 4:21 pm
Forum: The Dude
Topic: Dude dude-6.48.1 will not install on hAP AC2
Replies: 10
Views: 806

Re: Dude dude-6.48.1 will not install on hAP AC2

I don't understand what you are trying to do with the USB stick.

The upgrade/install process does not work from an USB stick.

you need to put the file dude-6.48.1-arm.npk in the /files directory and reboot to install it
by eddieb
Fri Mar 05, 2021 9:42 pm
Forum: General
Topic: Secure Road Warrior VPN in 6.48
Replies: 11
Views: 862

Re: Secure Road Warrior VPN in 6.48

to make things a bit more clear, my config is running on my CCR1009 gateway, directly connected to internet.
by eddieb
Thu Mar 04, 2021 5:39 pm
Forum: General
Topic: Secure Road Warrior VPN in 6.48
Replies: 11
Views: 862

Re: Secure Road Warrior VPN in 6.48

the roadwarrior topic has been around a while. my basic config is written here and it still works fine on 6.48.1 https://forum.mikrotik.com/viewtopic.php?f=2&t=146049&p=718941&hilit=ipsec#p718941 the bug mentioned in this discussion is fixed a while a go, I did not change my config. my c...
by eddieb
Fri Feb 26, 2021 11:42 am
Forum: Announcements
Topic: v6.48.1 [stable] is released!
Replies: 121
Views: 29959

Re: v6.48.1 [stable] is released!

I have 1 report with SIP problems on 6.48.1 on a 4011
Gigaset N300A basestation is unable to connect to the sip provider with MNDP on...

disabling it in IP->Neighhour->Discovery Settings solves the problem and all works fine
by eddieb
Tue Feb 23, 2021 11:03 am
Forum: General
Topic: Winbox - Darkmode - For the love of God, Please. [SOLVED]
Replies: 12
Views: 1138

Re: Winbox - Darkmode - For the love of God, Please. [SOLVED]

Please Mikrotik,

do NOT spent your time on something like Darkmode, it is not neccesary !
Focus on fixing bugs in ROS and prepare for ROS7...
by eddieb
Mon Feb 22, 2021 9:38 am
Forum: The Dude
Topic: Dude 6.48.1 client server connection issue
Replies: 1
Views: 353

Re: Dude 6.48.1 client server connection issue

no problems here, 1st screen is visible a couple of seconds after connect ...
running dude server on RB750Gr3 and client on Crossover OSX
by eddieb
Thu Feb 18, 2021 8:54 am
Forum: General
Topic: Upgrading Mikrotik devices through Dude
Replies: 4
Views: 301

Re: Upgrading Mikrotik devices through Dude

Unable to upload Ros firmware to Dude/files , Drag and drop doesn't work.Tried everything but failed.As per the manual to upgrade devices through dude ros firmware should be first uploaded to dude/files.
As @karlisi said, You can not upload thru the dude client. You need to use winbox to do that.
by eddieb
Wed Feb 17, 2021 10:42 am
Forum: General
Topic: Upgrading Mikrotik devices through Dude
Replies: 4
Views: 301

Re: Upgrading Mikrotik devices through Dude

What kind of help do you need ?
by eddieb
Tue Feb 16, 2021 12:53 pm
Forum: Scripting
Topic: MtkManager (Remote upgrade tool for RouterOS)
Replies: 29
Views: 7404

Re: MtkManager (Remote upgrade tool for RouterOS)

just sent you an email ;-)
I would like to participate in testing MtkManager
by eddieb
Sun Feb 14, 2021 9:11 am
Forum: The Dude
Topic: DUDE / MIB CAMBIUM DOESNT WORK [SOLVED]
Replies: 1
Views: 468

Re: DUDE / MIB CAMBIUM DOESNT WORK [SOLVED]

try to put your own mibs in /files/* directly, NOT in /files/default ...
at least that is what works here ...
by eddieb
Wed Feb 10, 2021 11:39 am
Forum: Announcements
Topic: v6.48.1 [stable] is released!
Replies: 121
Views: 29959

Re: v6.48.1 [stable] is released!

Screenshot 2021-02-10 at 10.37.14.png
on my RB750GR3 running 6.48.1 ...
no problems, there is just noting to configure so settings is empty ...
by eddieb
Mon Feb 08, 2021 4:14 pm
Forum: The Dude
Topic: Dude connects to ROS devices every minute and then disconnects
Replies: 25
Views: 3811

Re: Dude connects to ROS devices every minute and then disconnects

that is nasty, if MT can't reproduce it, they can't fix it ... The only thing that can be done is try to pinpoint it to certain hardware, configuration and/or combinations of that. I used to run dude on chr until 2 years ago, had so many VM related problems that I decided to get a dedicated MT devic...
by eddieb
Mon Feb 08, 2021 1:29 pm
Forum: Announcements
Topic: v6.48.1 [stable] is released!
Replies: 121
Views: 29959

Re: v6.48.1 [stable] is released!

you should not use that as only defense,
you should use firewall rules to protect your management interfaces
by eddieb
Mon Feb 08, 2021 12:06 pm
Forum: The Dude
Topic: Dude connects to ROS devices every minute and then disconnects
Replies: 25
Views: 3811

Re: Dude connects to ROS devices every minute and then disconnects

As I don't have any problems with dude, even on 6.48.1 it runs fine om my RB750Gr3. Probing not to many devices here, about 70 in several vlans and several L3 networks. Perhaps it is time to compare hardware ? where are you running dude on ? did you check /tools/profile ? How many devices are you pr...
by eddieb
Sat Feb 06, 2021 4:21 pm
Forum: Announcements
Topic: v6.48.1 [stable] is released!
Replies: 121
Views: 29959

Re: v6.48.1 [stable] is released!

Upgrading all my devices from 6.47.8 to 6.48.1 went smooth, no problems. Running 6.48.1 (stable) on : CCR1009-8G-1S (2x ipsec/l2tp site-to-site, ipsec/l2tp roadwarrior, dhcpd, dns), CRS125-24G-1S, RB1100, RB962UiGS-5HacT2HnT (10pc), RB931-2nD, RB951, RB750GL ,RB2011UAS-RM, PWR-LINE-AP, RB750Gr3 runn...
by eddieb
Mon Feb 01, 2021 10:13 pm
Forum: The Dude
Topic: Dude Client connects only in 1 out of 5 tries
Replies: 4
Views: 723

Re: Dude Client connects only in 1 out of 5 tries

running 6.47.8 now. Never seen this problem since I started with Dude about 3 years ago.
by eddieb
Fri Jan 29, 2021 2:30 pm
Forum: RouterBOARD hardware
Topic: MT support refused to fix issues
Replies: 15
Views: 1619

Re: MT support refused to fix issues

Usually Mikrotik support tries very hard to solve problems. Sometimes we don't like what they say - like "it will be fixed in v7" - but they DO answer and try to fix things. I fully agree on that, they are very cooperative and ask you to do things to test so they can try to reproduce that...
by eddieb
Wed Jan 27, 2021 10:46 am
Forum: SwOS
Topic: CSS106 & Uptime
Replies: 8
Views: 3980

Re: CSS106 & Uptime

try on .1.3.6.1.2.1.1.3.0
Screenshot 2021-01-27 at 09.45.16.png
by eddieb
Wed Dec 30, 2020 9:53 am
Forum: General
Topic: Winbox - MacOS Big Sur
Replies: 22
Views: 3850

Re: Winbox - Big Sur

use crossover ...
you can run winbox.exe 32 or 64 bit with it
even dude-client will work
by eddieb
Mon Dec 28, 2020 10:28 pm
Forum: The Dude
Topic: Dude connects to ROS devices every minute and then disconnects
Replies: 25
Views: 3811

Re: Dude connects to ROS devices every minute and then disconnects

my RB750Gr3 says cpu-count 4 ...
Screenshot 2020-12-28 at 21.25.37.png
I am monitoring all my MT devices with both ROS monitoring and SNMP ...
Screenshot 2020-12-28 at 21.23.25.png
Screenshot 2020-12-28 at 21.23.42.png
by eddieb
Mon Dec 28, 2020 10:00 pm
Forum: The Dude
Topic: Dude connects to ROS devices every minute and then disconnects
Replies: 25
Views: 3811

Re: Dude connects to ROS devices every minute and then disconnects

dude is running on a dedicated RB750Gr3 which has a 4-core cpu ...
by eddieb
Mon Dec 28, 2020 9:26 pm
Forum: The Dude
Topic: Dude connects to ROS devices every minute and then disconnects
Replies: 25
Views: 3811

Re: Dude connects to ROS devices every minute and then disconnects

I am on dude 6.47.8 without any problems ...
(Max connection speed is 1GB/s here)

just my 2c
by eddieb
Mon Dec 28, 2020 10:00 am
Forum: Announcements
Topic: v6.48 [stable] is released!
Replies: 324
Views: 69278

Re: v6.48 [stable] is released!

Time for me to ask again, is the bug with the SFP ports not working fixed in this version? (my MikroTik hAP ac RB962UiGS-5HacT2HnT View this servicedesk in support portal ) Your issue might be depending on the type of SFP you use, I have 4pc of RB962UiGS-5HacT2HnT with Mikrotik SFP's and they work ...
by eddieb
Wed Dec 02, 2020 12:03 pm
Forum: The Dude
Topic: The Dude 64bit version?
Replies: 9
Views: 3624

Re: The Dude 64bit version?

Using CrossOver for a while now and I must admit, I am impressed.
32bit windows version of Dude client works smooth.
even upgrading to latest version inside the program worked.
64bit windows version of Winbox also. !
by eddieb
Tue Dec 01, 2020 5:30 pm
Forum: The Dude
Topic: Trap Generator set to "temp-exception"
Replies: 1
Views: 472

Re: Trap Generator set to "temp-exception"

if the device gets to hot, it wil start sending snmp traps ...
by eddieb
Tue Dec 01, 2020 11:24 am
Forum: The Dude
Topic: Dude Server update OS
Replies: 12
Views: 1327

Re: Dude Server update OS

ok, this looks like a totally different issue.
you experience problems with connecting ROS devices in dude.
I had the same problem and until now it was always a problem with the credentials ...
by eddieb
Tue Dec 01, 2020 11:04 am
Forum: The Dude
Topic: Which dude version is stable??
Replies: 2
Views: 512

Re: Which dude version is stable??

If you have crashes in dude server, contact mt support ...
send them a supout.riff and they should be able to help.
by eddieb
Tue Dec 01, 2020 11:00 am
Forum: Announcements
Topic: v6.47.8 [stable] is released!
Replies: 56
Views: 14182

Re: v6.47.8 [stable] is released!

upgraded last weekend, no problems here
by eddieb
Tue Dec 01, 2020 10:52 am
Forum: The Dude
Topic: Dude Server update OS
Replies: 12
Views: 1327

Re: Dude Server update OS

I am not exactly sure what you are asking for ... to be able to use dude server to upgrade mt devices in your network you need to put the correct .npk files in the /files directory on your dude server. my RB750Gr3 has a microsd in it and it is mounted at /dude, in my case the .npk files are in /dude...
by eddieb
Fri Nov 20, 2020 1:16 pm
Forum: The Dude
Topic: The Dude 64bit version?
Replies: 9
Views: 3624

Re: The Dude 64bit version?

dude client works with CrossOver !!!
running 32 bit dude client in a W10 32bit bottle on latest CrossOver on OSX Catalina (10.15.7).
Should even work on Big Sur, but for now I am not going to try that ...
(needless to say that winbox works fine in Crossover too !)
by eddieb
Fri Nov 13, 2020 11:15 am
Forum: The Dude
Topic: The Dude 64bit version?
Replies: 9
Views: 3624

Re: The Dude 64bit version?

Yesterday I updated my last MacBook Pro to 10.15.x and lost 32bit support. So NO dude client anymore here ... Running blind now and looking for alternatives, I tried several other monitoring systems but no one like Dude ... very sad I need to buy 1 wintendo machine in this Mac environment just to wa...
by eddieb
Thu Nov 12, 2020 11:08 am
Forum: The Dude
Topic: The Dude 64bit version?
Replies: 9
Views: 3624

Re: The Dude 64bit version?

with the upcoming Big Sur release, support for OSX 10.14 wil be dropped and there wil be no supported OSX capable running 32bit apps ...
This is the end of Dude on OSX ...
Very sad that MT still does not have a 64bit/OSX version..
Might be time to look into alternatives
by eddieb
Thu Aug 27, 2020 4:50 pm
Forum: Announcements
Topic: v6.47.2 [stable] is released!
Replies: 90
Views: 19340

Re: v6.47.2 [stable] is released!

updating to 6.47.2 went smooth ... from 6.47.1 to 6.47.2 done thru the dude ;-) No problems so far
Still running OSX 10.14.x to be able to run the 32bit Dude in Dude4Mac 6.47.2
by eddieb
Thu Aug 20, 2020 8:22 am
Forum: Wireless Networking
Topic: Mikrotik wi-fi and Iphone = problem
Replies: 97
Views: 81029

Re: Mikrotik wi-fi and Iphone = problem

set [ find default-name=wlan2 ] band=5ghz-a/n/ac channel-width=20/40mhz-Ce country=netherlands disabled=no frequency=5260 installation=indoor max-station-count=50 mode=ap-bridge preamble-mode=long radio-name=funny5 security-profile=funny ssid=funny station-roaming=enabled wireless-protocol=802.11 w...
by eddieb
Wed Aug 19, 2020 10:40 pm
Forum: Wireless Networking
Topic: Mikrotik wi-fi and Iphone = problem
Replies: 97
Views: 81029

Re: Mikrotik wi-fi and Iphone = problem

running ROS for a couple of years in an Apple only network (IOS/IPadOS/OSX)
using 10 pc of hAP AC (RB962UiGS-5HacT2HnT) and max 250 wireless devices.
Everything works fine, no problems.
by eddieb
Fri Jul 17, 2020 10:36 am
Forum: General
Topic: firefox 78.0.2 can not connect to mikrotik sites ...
Replies: 10
Views: 2649

Re: firefox 78.0.2 can not connect to mikrotik sites ...

Hi @Normis,

thanks for keeping with me,
somehow the problem disappeared after a couple of days.
I really hope to find a cause but the lack of logging makes that difficult.
by eddieb
Thu Jul 16, 2020 9:26 am
Forum: General
Topic: firefox 78.0.2 can not connect to mikrotik sites ...
Replies: 10
Views: 2649

Re: firefox 78.0.2 can not connect to mikrotik sites ...

still not working on FF 78.0.2 on OSX ...
all other browsers work.
to bad no error message or logging ...
by eddieb
Sat Jul 11, 2020 8:50 pm
Forum: General
Topic: firefox 78.0.2 can not connect to mikrotik sites ...
Replies: 10
Views: 2649

Re: firefox 78.0.2 can not connect to mikrotik sites ...

yeah, that is the windows solution, i'd prefer the *nix solution, find the cause and solve it ... Screenshot 2020-07-11 at 19.48.16.png and YES, firefox will connect to other sites ... and YES, chrome, safari and brave will connect to mikrotik .. (using chrome now) until FF 78.0.1 I was using FF for...
by eddieb
Sat Jul 11, 2020 6:49 pm
Forum: General
Topic: firefox 78.0.2 can not connect to mikrotik sites ...
Replies: 10
Views: 2649

Re: firefox 78.0.2 can not connect to mikrotik sites ...

tnx for the suggestion,
my firefox has DOH disabled ...
by eddieb
Sat Jul 11, 2020 3:07 pm
Forum: General
Topic: firefox 78.0.2 can not connect to mikrotik sites ...
Replies: 10
Views: 2649

firefox 78.0.2 can not connect to mikrotik sites ...

A couple of days ago I updated Firefox from 78.0.1 to 78.0.2 and now I am unable to connect to https://www.mikrotik.com and https://forum.mikrotik.com ...
Running FF on OSX 10.14.x
no problems with Safari, Chrome or Brave.
Any suggestions ?
I allready cleared FF caches etc ...
by eddieb
Fri Jul 10, 2020 5:50 pm
Forum: General
Topic: Unofficial IRC channel for Mikrotik users
Replies: 12
Views: 5867

Re: Unofficial IRC channel for Mikrotik users

we would be better of with a discord support server ...
by eddieb
Thu Jul 02, 2020 7:44 am
Forum: The Dude
Topic: the new dude is garbage
Replies: 4
Views: 1427

Re: the new dude is garbage

As I don't see this issue on my dude, I would like to know what platform you are running dude on. I am running dude on a dedicated RB750GR3 now, used to run inside VBOX on an OSX server for years. On VBOX I had issues with UDP, if the host system used the same ports, sometimes packets would never re...
by eddieb
Sun Jun 28, 2020 8:43 am
Forum: The Dude
Topic: (BUG) Dude Client crashing on device details and charts
Replies: 24
Views: 4758

Re: (BUG) Dude Client crashing on device details and charts

at least file a bug report to support@mikrotik.com ...
by eddieb
Wed Jun 03, 2020 11:39 am
Forum: Announcements
Topic: v6.47 [stable] is released!
Replies: 349
Views: 112384

Re: v6.47 [stable] is released!

updating to 6.47 went smooth ... from 6.46.5 to 6.47 done thru the dude ;-) No problems so far Still running OSX 10.14.x to be able to run the 32bit Dude in Dude4Mac 6.47.
by eddieb
Fri May 29, 2020 9:38 am
Forum: General
Topic: RouterBOARD 750G r3 no HW Offload ?
Replies: 10
Views: 1942

Re: RouterBOARD 750G r3 no HW Offload ?

tnx for pointing to this documentation.
I think I can live with no HW acceleration on my local dude server ...
by eddieb
Fri May 29, 2020 7:18 am
Forum: General
Topic: RouterBOARD 750G r3 no HW Offload ?
Replies: 10
Views: 1942

Re: RouterBOARD 750G r3 no HW Offload ?

somehow setting STP on the bridge to none made the H appear ... but WHY ? all my other type of devices are running RSTP and do show the H ... interface bridge port print detail Flags: X - disabled, I - inactive, D - dynamic, H - hw-offload 0 H interface=ether1 bridge=bridge priority=0x80 path-cost=1...
by eddieb
Thu May 28, 2020 9:42 pm
Forum: General
Topic: RouterBOARD 750G r3 no HW Offload ?
Replies: 10
Views: 1942

Re: RouterBOARD 750G r3 no HW Offload ?

I had port 5 connected and the H was not there ...
by eddieb
Thu May 28, 2020 9:24 pm
Forum: General
Topic: RouterBOARD 750G r3 no HW Offload ?
Replies: 10
Views: 1942

RouterBOARD 750G r3 no HW Offload ?

hi, I am running dude on a RouterBOARD 750G r3. Although it look like the device is capable to do hw offload it seems not to work ... system routerboard print routerboard: yes board-name: hEX model: RouterBOARD 750G r3 serial-number: xxxxxxxxxxxxxxxx firmware-type: mt7621L factory-firmware: 3.35 cur...
by eddieb
Wed Apr 15, 2020 1:14 pm
Forum: General
Topic: 6.46.5 dude agent memory leak ?
Replies: 0
Views: 1390

6.46.5 dude agent memory leak ?

Hi, I am running dude for years and it normally works fine. Last week I updated all devices from 6.46.3 to 6.46.5 and at first all looks ok. But, I am running 1 dude agent on a remote RB750GL that is monitoring a couple of devices behind it. It looks like it is running out of memory within 48hours. ...
by eddieb
Sun Apr 12, 2020 9:34 am
Forum: Beginner Basics
Topic: CRS125 Routing Performance
Replies: 9
Views: 2344

Re: CRS125 Routing Performance

Keep in mind that the CRS125 is a SWITCH ...
It can do wirespeed switching but all routing will go thru the not so strong CPU ...
IF you need routing, look for an other MT device, like a CCR or RB4000.
by eddieb
Sat Apr 11, 2020 11:43 am
Forum: Announcements
Topic: v6.46.5 [stable] is released!
Replies: 72
Views: 31332

Re: v6.46.5 [stable] is released!

updating to 6.46.5 went smooth ... from 6.46.3 to 6.46.5 done thru the dude ;-) No problems so far Still running OSX 10.14.x to be able to run the 32bit Dude in Dude4Mac 6.46.5 (which I created manually with some hints from Joshaven, thanks !) system auto upgrade works as designed. no problems. all ...
by eddieb
Thu Apr 02, 2020 8:17 am
Forum: Announcements
Topic: v6.46.4 [stable] is released!
Replies: 107
Views: 53908

Re: v6.46.4 [stable] is released!

smb on a security device is just crazy. It should be entirely removed from RouterOS. That's what nas devices are made for, firewalled behind the router.
+
by eddieb
Mon Mar 16, 2020 1:56 pm
Forum: Announcements
Topic: v6.46.4 [stable] is released!
Replies: 107
Views: 53908

Re: v6.46.4 [stable] is released!

We are looking into the communication issues with The Dude connecting through Agent. Other issues related with The Dude "std failure" message must be caused by old version on either The Dude server or RouterOS client. I did some testing : - upgraded dude-client to 6.46.4 - upgraded dude-s...
by eddieb
Wed Mar 11, 2020 1:34 pm
Forum: Announcements
Topic: v6.46.4 [stable] is released!
Replies: 107
Views: 53908

Re: v6.46.4 [stable] is released!

hmm, upgrading is difficult ... running 6.46.3 dude-client in wine on OSX. Normally it auto upgrades if the dude server is upgraded but now it doesn't. Instructions say : upgrade dude-client manually ... That won't work ! Did anybody build a dude-client for OSX in wine ? I really don't want to buy a...
by eddieb
Wed Feb 26, 2020 9:19 am
Forum: Announcements
Topic: SwOS version 2.11 released!
Replies: 49
Views: 83537

Re: SwOS version 2.11 released!

just upgraded 4pc CSS106-5G-1S without any issues.
by eddieb
Sat Jan 18, 2020 10:30 am
Forum: Announcements
Topic: v6.46.2 [stable] is released!
Replies: 121
Views: 38243

Re: v6.46.2 [stable] is released!

updating to 6.46.2 went smooth ... from 6.46.1 to 6.46.2 done thru the dude ;-)
No problems so far
by eddieb
Tue Dec 24, 2019 10:45 am
Forum: Announcements
Topic: v6.46.1 [stable] is released!
Replies: 72
Views: 40603

Re: v6.46.1 [stable] is released!

@complex1 I also did check all my other devices, no problems on other architectures.
AND,
I just filed a ticket on this issue as it should be done ...
by eddieb
Mon Dec 23, 2019 11:20 pm
Forum: Announcements
Topic: v6.46.1 [stable] is released!
Replies: 72
Views: 40603

Re: v6.46.1 [stable] is released!

reading your comment throws up a few questions ... - DID anyone actually report this to support@mikrotik.com ? Just shouting here is useless, this is a userforum and not an official support channel ... And I totally disagree on your statement about testing, the guys at MT perform countless tests on ...
by eddieb
Mon Dec 23, 2019 4:39 pm
Forum: Announcements
Topic: v6.46.1 [stable] is released!
Replies: 72
Views: 40603

Re: v6.46.1 [stable] is released!

I'll have to admit ...
I just checked the "Check installation" and it also fails with "damaged routeros-powerpc package: bad image".
... no problems while running ...,
by eddieb
Mon Dec 23, 2019 3:17 pm
Forum: Announcements
Topic: v6.46.1 [stable] is released!
Replies: 72
Views: 40603

Re: v6.46.1 [stable] is released!

upgrading my RB1100 (PPC) went flawlessly ...
by eddieb
Wed Dec 18, 2019 9:01 am
Forum: Announcements
Topic: v6.46.1 [stable] is released!
Replies: 72
Views: 40603

Re: v6.46.1 [stable] is released!

updating to 6.46.1 went smooth ... from 6.46 to 6.46.1 done thru the dude ;-)
dude font problem fixed.
No problems so far
by eddieb
Tue Dec 17, 2019 1:59 pm
Forum: Wireless Networking
Topic: WIFI AP Mikrotik with Sonoff Devices
Replies: 16
Views: 4829

Re: WIFI AP Mikrotik with Sonoff Devices

Hey eddieB, I dont have any tasmanian devils or komodo dragons or their offspring Tasmoto's but just wanted to say thanks for assisting others and trying to solve their issues!!! Good on ya mate! Thanks for your fellow heads-up. Most of the so called problems are just configuration issues ... Keep ...
by eddieb
Fri Dec 13, 2019 7:58 am
Forum: Wireless Networking
Topic: WIFI AP Mikrotik with Sonoff Devices
Replies: 16
Views: 4829

Re: WIFI AP Mikrotik with Sonoff Devices

Here you go ... RouterOS stripped to essential # dec/13/2019 06:34:03 by RouterOS 6.46 # software id = TNXU-TVMJ # # model = RouterBOARD 962UiGS-5HacT2HnT /interface bridge add admin-mac=xx:xx:xx:xx:xx:xx auto-mac=no name=bridge /interface wireless channels add band=2ghz-g/n frequency=2412 list=2.4G...
by eddieb
Wed Dec 11, 2019 11:22 am
Forum: Wireless Networking
Topic: WIFI AP Mikrotik with Sonoff Devices
Replies: 16
Views: 4829

Re: WIFI AP Mikrotik with Sonoff Devices

Michael,

perhaps you should test your tasmota devices on a NON virtual AP and try if the problem still excists ...
I am running 10+ tasmota devices on my MT AP's and do not have any problems.
by eddieb
Sun Dec 08, 2019 11:03 am
Forum: Wireless Networking
Topic: HAP ac RB962UiGS-5HacT2HnT - client1<->AP<->client2 no more 150Mbit speed iperf3
Replies: 8
Views: 2632

Re: HAP ac RB962UiGS-5HacT2HnT - client1<->AP<->client2 no more 150Mbit speed iperf3

Using HAP AC (RB962) from Macbook to server on lan ... HAP AC runing on 40MHz channel width, great performance iperf3 -c 192.168.2.242 Connecting to host 192.168.2.242, port 5201 [ 4] local 192.168.2.220 port 62886 connected to 192.168.2.242 port 5201 [ ID] Interval Transfer Bandwidth [ 4] 0.00-1.00...
by eddieb
Fri Dec 06, 2019 9:38 am
Forum: Announcements
Topic: v6.46 [stable] is released!
Replies: 113
Views: 44078

Re: v6.46 [stable] is released!

Not so sure I want to upgrade, my RB450Gx4 is not a concern its my two CAPACs and the reports above of possible wifi issues????
running several HAP AC (RB962) on 6.46 ... dozens of IOS devices. I don't see any unexpected wifi reconnects ...
by eddieb
Thu Dec 05, 2019 9:05 am
Forum: Announcements
Topic: v6.46 [stable] is released!
Replies: 113
Views: 44078

Re: v6.46 [stable] is released!

updating to 6.46 went smooth ... from 6.45.7 to 6.46 done thru the dude ;-)
No problems so far
by eddieb
Sat Nov 02, 2019 12:50 pm
Forum: The Dude
Topic: Update wireless devices via The Dude
Replies: 4
Views: 3896

Re: Update wireless devices via The Dude

Can you tell us more about which packages can not be found ?
I use dude to upgrade all my devices and have at least one device running with separate package setup.
I could do some testing ...

Eddie
by eddieb
Fri Nov 01, 2019 9:27 am
Forum: Beginner Basics
Topic: I can't update CCR1036
Replies: 2
Views: 820

Re: I can't update CCR1036

at least you can remove all "mipsbe" packages. A CCR is "tile" and needs only "tile" packages ...
by eddieb
Wed Oct 30, 2019 9:09 am
Forum: Announcements
Topic: v6.45.7 [stable] is released!
Replies: 104
Views: 46696

Re: v6.45.7 [stable] is released!

updating to 6.45.7 went smooth ... from 6.45.6 to 6.45.7 done thru the dude ;-)
No problems so far
by eddieb
Tue Oct 29, 2019 9:02 pm
Forum: The Dude
Topic: Dude constantly freezing
Replies: 9
Views: 5543

Re: Dude constantly freezing

dude 6.45.6 is running here since it was available. No freezes at all ...
Uptime is almost 20 days now, had to reboot OSX a couple of weeks ago.
runs on CHR in VBOX on OSX.
by eddieb
Tue Oct 15, 2019 9:03 am
Forum: General
Topic: MacOS Catalina, iOS, Catalyst, SwiftUI & Wine
Replies: 188
Views: 73507

Re: MacOS Catalina, iOS, Catalyst, SwiftUI & Wine

nothing wrong with a windows program, but please make it 64bit ...
I don't need OSX stuff, but 64bit would be nice
by eddieb
Mon Oct 14, 2019 8:28 pm
Forum: General
Topic: MacOS Catalina, iOS, Catalyst, SwiftUI & Wine
Replies: 188
Views: 73507

Re: MacOS Catalina, iOS, Catalyst, SwiftUI & Wine

Dude currently no immediate plans. Run it in Windows.
Wow, that is bad, so I have to buy 1 windows machine to run dude ????
BAD BAD BAD
by eddieb
Fri Sep 13, 2019 9:56 am
Forum: Announcements
Topic: v6.45.6 [stable] is released!
Replies: 59
Views: 46091

Re: v6.45.6 [stable] is released!

updating to 6.45.6 went smooth ... from 6.45.5 to 6.45.6 done thru the dude ;-)
No problems so far
by eddieb
Sun Sep 08, 2019 8:51 pm
Forum: General
Topic: Winbox 64bit Version
Replies: 80
Views: 28879

Re: Winbox 64bit Version

for now I'll just don't upgrade MacOS ...
Winbox on Wine works fine but is indeed a 32bit app.
I noticed that some guys @MT also use MacOS, so lets hope they will compile a 64bit version just because they need that for themselves ..

Eddie
by eddieb
Tue Sep 03, 2019 7:49 pm
Forum: General
Topic: Feature Request: IPerf
Replies: 59
Views: 17477

Re: Feature Request: IPerf

-1

don't put development effort in tools that do not belong on a router !
by eddieb
Fri Aug 30, 2019 8:47 pm
Forum: Announcements
Topic: v6.45.5 [stable] is released!
Replies: 54
Views: 28540

Re: v6.45.5 [stable] is released!

updating to 6.45.5 went smooth ... from 6.45.3 to 6.45.5 with some help from the dude ;-)
No problems so far
by eddieb
Sun Aug 25, 2019 8:36 am
Forum: General
Topic: 100% CPU load in CCR 1009 [SOLVED]
Replies: 22
Views: 4601

Re: 100% CPU load in CCR 1009 [SOLVED]

running that much cpu on console tasks is weird. That is why I asked for a config. If you run a /export hide-sensitive all password will be hidden. You can wipe all the ppp user names to and leave one ... BUT, the best way is to make a suppout.rif and send it to support@mikrotik.com, they can see in...
by eddieb
Sat Aug 24, 2019 1:18 pm
Forum: General
Topic: 100% CPU load in CCR 1009 [SOLVED]
Replies: 22
Views: 4601

Re: 100% CPU load in CCR 1009 [SOLVED]

The screenshot you posted with the profile running was sorted by NAME, please post one sorted by CPU use ?
Pleas post your config ( /export hide-sensitive ).

(never saw this behavior on my 1009 ... )
by eddieb
Thu Aug 22, 2019 8:28 am
Forum: General
Topic: Winbox 64bit Version
Replies: 80
Views: 28879

Re: Winbox 64bit Version

As winbox user on OSX I really want a 64bit version too, I want to upgrade my macbook and it is complaining about unable to use the 32bit version of winbox (in wine) ..
A native version would be great too

Eddie
by eddieb
Mon Aug 19, 2019 11:48 am
Forum: Wireless Networking
Topic: Nefit Easy dropping from 2.4GHz ...
Replies: 0
Views: 755

Nefit Easy dropping from 2.4GHz ...

Hi, I have a strange issue with my Nefit Easy thermostat, it drops of my 2.4GHz and has lots of problems reconnecting ... running 3x hAP AC (RB962) with ROS-6.45.3 . 2.4GHz and 5GHz both running same SSID gateway to ISP is a CCR1009 on 6.45.3 about 20 different clients without problems (iPhone's/iPa...
by eddieb
Sun Jul 28, 2019 12:34 pm
Forum: Announcements
Topic: v6.45.2 [stable] is released!
Replies: 206
Views: 57624

Re: v6.45.2 [stable] is released!

updating to 6.45.2 went smooth ... from 6.45.1 to 6.45.2 with some help from the dude ;-)
No problems so far
by eddieb
Wed Jul 03, 2019 12:48 pm
Forum: Announcements
Topic: Winbox v3.19 released!
Replies: 33
Views: 24908

Re: Winbox v3.19 released!

Updated on OSX (Wine) thru tools menu,
works fine
by eddieb
Tue Jul 02, 2019 8:29 am
Forum: General
Topic: Firewall Causing Low Throughput
Replies: 20
Views: 4124

Re: Firewall Causing Low Throughput

please mention Router type,
Firewall packages are handled by the CPU, so on slower CPU models you might not get wire speed on your firewalled connection.
by eddieb
Mon Jul 01, 2019 8:01 pm
Forum: Announcements
Topic: v6.45.1 [stable] is released!
Replies: 416
Views: 137833

Re: v6.45.1 [stable] is released!

updating to 6.45.1 went smooth ... from 6.44.3 to 6.45.1 with some help from the dude ;-)
No problems so far
by eddieb
Sun May 12, 2019 8:56 am
Forum: General
Topic: L2TP VPN "L2TP UDP packet received from" over and over again. [SOLVED]
Replies: 14
Views: 5747

Re: L2TP VPN "L2TP UDP packet received from" over and over again. [SOLVED]

For people of the future googling this issue. There is not fix if you want to do L2TP, none that I found anyway. L2TP is great for users (laptops/remote desktops) needing to VPN, but not super solid for a site-to-site. I ended up getting an OVPN (native to Mikrotiks, both server and client) setup w...
by eddieb
Wed Apr 24, 2019 5:34 pm
Forum: Announcements
Topic: v6.44.3 [stable] is released!
Replies: 123
Views: 48573

Re: v6.44.3 [stable] is released!

updating to 6.44.3 went smooth ... from 6.44.2 to 6.44.3 with some help from the dude ;-)
No problems so far
by eddieb
Tue Apr 09, 2019 8:51 pm
Forum: Wireless Networking
Topic: hAP ac wireless problem
Replies: 8
Views: 1923

Re: hAP ac wireless problem

wireless speed issues were discussed here several times. Perhaps you should search this forum ...

like : viewtopic.php?f=7&t=132384
by eddieb
Thu Apr 04, 2019 1:18 pm
Forum: Announcements
Topic: v6.44.2 [stable] is released!
Replies: 67
Views: 22372

Re: v6.44.2 [stable] is released!

Update from 6.44.1 to 6.44.2 went smooth, no problems
by eddieb
Tue Apr 02, 2019 11:24 am
Forum: Wireless Networking
Topic: hAP AC
Replies: 8
Views: 1564

Re: hAP AC

as an hAP AC will max at about 600MBit thruput over the cpu, it totatlly depends on what your clients are using ...
IF they all use 10MBit streaming, you will be able to handle 60 users without problems
IF your clients use less concurrent bandwidth, you can handle more users ..
by eddieb
Wed Mar 27, 2019 9:11 pm
Forum: Wireless Networking
Topic: Hap ac & poor performance in 2.4GHz and 5GHz [SOLVED]
Replies: 20
Views: 3621

Re: Hap ac & poor performance in 2.4GHz and 5GHz [SOLVED]

If you use CAPSMAN and do NOT use local-forwarding, ALL traffic will need to be encrypted over a tunnel from the AP to the CAP. This wil hav huge impact on performance !!! If you use the hAP AC in stand-alone mode it will perform as designed. if you use ANY AP with CAPSMAN without local-forwarding y...
by eddieb
Sat Mar 16, 2019 6:13 pm
Forum: Announcements
Topic: v6.44.1 [stable] is released!
Replies: 86
Views: 30732

Re: v6.44.1 [stable] is released!

Is it possible to stay on the topic ? So, just what is in the changelog for this release.
If it is NOT in the changelog, it is NOT in this release. Please open a separate topic if needed.
by eddieb
Sat Mar 16, 2019 12:27 pm
Forum: Announcements
Topic: v6.44.1 [stable] is released!
Replies: 86
Views: 30732

Re: v6.44.1 [stable] is released!

Updated all my devices from 6.44 to 6.44.1 thru dude, no problems
ipsec site-to-site run fine
l2tp-ipsec roadwarrior dailin works fine

Eddie
by eddieb
Thu Mar 14, 2019 8:06 am
Forum: General
Topic: Another ROS upgrade, Another bricked hAP ac
Replies: 4
Views: 1127

Re: Another ROS upgrade, Another bricked hAP ac

I have 10 hAP AC (RB962). Updating to every stable update for the last 2 years, never had any problems.
by eddieb
Tue Mar 05, 2019 3:35 pm
Forum: General
Topic: ROS 6.44 - VPN L2TP not working
Replies: 28
Views: 16797

Re: ROS 6.44 - VPN L2TP not working

that was FAST ! Emils thanks for your help !!! it seems the way dynamic peer configuration from L2TP server were added to the peers menu changed between 6.43.12 and 6.44 dynamic peers take precedence BEFORE static peer entries ... In my case there was a static default PEER with a password used by al...
by eddieb
Tue Mar 05, 2019 2:35 pm
Forum: General
Topic: ROS 6.44 - VPN L2TP not working
Replies: 28
Views: 16797

Re: ROS 6.44 - VPN L2TP not working

done ;-)
by eddieb
Tue Mar 05, 2019 2:15 pm
Forum: General
Topic: ROS 6.44 - VPN L2TP not working
Replies: 28
Views: 16797

Re: ROS 6.44 - VPN L2TP not working

I tried this beta but it did not solve my problems ... L2TP server with PSK is not working
by eddieb
Tue Mar 05, 2019 12:24 pm
Forum: General
Topic: ROS 6.44 - VPN L2TP not working
Replies: 28
Views: 16797

Re: ROS 6.44 - VPN L2TP not working

Hopefully we won't have to wait to long for this fix in current ...
by eddieb
Tue Mar 05, 2019 8:52 am
Forum: General
Topic: ROS 6.44 - VPN L2TP not working
Replies: 28
Views: 16797

Re: ROS 6.44 - VPN L2TP not working

@emils nice that this problem is allready known. in my case below is the relevant part of the config : /ip pool add name=dyn-vpn ranges=192.168.88.2-192.168.88.19 /ppp profile add change-tcp-mss=yes dns-server=192.168.88.1 local-address=192.168.88.1 \ name=ppp-in only-one=no remote-address=dyn-vpn u...
by eddieb
Mon Mar 04, 2019 9:05 pm
Forum: General
Topic: ROS 6.44 - VPN L2TP not working
Replies: 28
Views: 16797

Re: ROS 6.44 - VPN L2TP not working

Hmm, my site-to-site tunnels where converted correcty, but my roadwarrior PSK does not work anymore ...

"parsing packet failed, possible cause: wrong password"

until 6.43.12 it worked ok
by eddieb
Wed Feb 27, 2019 9:31 am
Forum: Announcements
Topic: v6.44 [stable] is released!
Replies: 219
Views: 59509

Re: v6.44 [stable] is released!

Updated all my devices from 6.43.12 to 6.44 thru dude, no problems

Eddie
by eddieb
Sat Feb 23, 2019 1:13 pm
Forum: RouterBOARD hardware
Topic: RB962UiGS-5HacT2HnT
Replies: 4
Views: 1043

Re: RB962UiGS-5HacT2HnT

If you really want 4000 dns entries and 30.000 firewall rules, you should reconsider your choice for the RB962, which is not intended as enterprise gateway, it is a home access-point ...
by eddieb
Sat Feb 16, 2019 9:41 am
Forum: Announcements
Topic: v6.43.12 [stable] is released!
Replies: 49
Views: 22036

Re: v6.43.12 [stable] is released!

Upgraded from 6.43.11 -> 6.43.12
using dude to push the packages on

CCR1009-8G-1S (2x ipsec/l2tp site-to-site, dhcpd)
CRS125-24G-1S
RB1100
RB962UiGS-5HacT2HnT (10pc)
RB951
RB750GL
RB2011UAS-RM
CHR running dude (CHR running in VirtualBox on OSX)

without any issues
by eddieb
Wed Feb 06, 2019 8:57 am
Forum: Announcements
Topic: v6.43.11 [stable] is released!
Replies: 79
Views: 22801

Re: v6.43.11 [stable] is released!

Upgraded from 6.43.8 -> 6.43.11
using dude to push the packages on

CCR1009-8G-1S (2x ipsec/l2tp site-to-site, dhcpd)
CRS125-24G-1S
RB1100
RB962UiGS-5HacT2HnT (10pc)
RB951
RB750GL
RB2011UAS-RM
CHR running dude (CHR running in VirtualBox on OSX)

without any issues
by eddieb
Tue Jan 29, 2019 8:52 pm
Forum: General
Topic: [Formal Complaint] Support is ignoring my problem for 3 weeks
Replies: 28
Views: 3748

Re: [Formal Complaint] Support is ignoring my problem for 3 weeks

as this is a userforum, not a support forum, ALL communication to mikrotik should be addressed to them by e-mail ... preferably to support@mikrotik.com
by eddieb
Tue Jan 22, 2019 2:08 pm
Forum: General
Topic: 6.43.8 vulnerability or hack?
Replies: 31
Views: 12425

Re: 6.43.8 vulnerability

Perhaps you should not use the word vulnerability until it is confirmed ...
Until now you can only name it "hacked" ...
And the reason for that is not clear

ps,
send email to support@mikrotik.com for help, this is a user forum, not a support forum
by eddieb
Thu Jan 17, 2019 10:46 am
Forum: General
Topic: Sofware VLAN/Bridge on RuterOS explained.
Replies: 63
Views: 31365

Re: Sofware VLAN/Bridge on RuterOS explained.

Still trying to figure this out.
Is it possible to post a small working example ?
by eddieb
Thu Jan 17, 2019 9:04 am
Forum: Wireless Networking
Topic: Country Code [SOLVED]
Replies: 56
Views: 14917

Re: Country Code [SOLVED]

I noticed this behavior too ... MT devices (like my RB962's) do not transmit a country code. But, not all do Some DO, like FritzBox from AVM, Some Samsung device, Some Arcadyan device, Some Ziggo devices (transmit EU) Some DON'T, Like MT, ZTE devices, Belkin devices, TP-Link devices, Sitecom devices...
by eddieb
Wed Jan 16, 2019 10:20 pm
Forum: General
Topic: CCR Mikrotik Bandwidth Test - Urgent...-Important
Replies: 8
Views: 1803

Re: CCR Mikrotik Bandwidth Test - Urgent...-Important

You should sent support questions to support@mikrotik.com
by eddieb
Tue Jan 15, 2019 8:21 am
Forum: Announcements
Topic: SwOS version 2.9 released!
Replies: 72
Views: 41033

Re: SwOS version 2.9 released!

Updated all my RB260GS(CSS106-5G-1S) to 2.9 without any issues.
by eddieb
Wed Jan 09, 2019 9:16 pm
Forum: The Dude
Topic: The Dude IS Dead, really, isn't it?
Replies: 41
Views: 16281

Re: The Dude IS Dead, really, isn't it?

Too bad to read only negative experiances here. I run dude 6.43.8 on CHR in VM . It does what it has to do, runs for a couple of years now, updated with every release. Sometimes a manual vacuumdb is neccesary to get snmp counters running after an update. No further problems seen here, great function...
by eddieb
Wed Jan 09, 2019 8:54 pm
Forum: SwOS
Topic: SwOS on a CRS-125
Replies: 6
Views: 3325

Re: SwOS on a CRS-125

as the wifi interface is NOT on the same switch-chip as the eth ports, wifi will never have hardware-accelleration.
wifi will allways pass thru the cpu and is limited by the cpu performance
by eddieb
Wed Jan 09, 2019 8:45 pm
Forum: General
Topic: Apple devices flooding DHCP server
Replies: 15
Views: 4684

Re: Apple devices flooding DHCP server

same here, running ROS 6.43.8.
lots of Apple devices, all on dhcp.
Works as expected, no flooding seen here.
by eddieb
Fri Dec 21, 2018 11:18 pm
Forum: Announcements
Topic: v6.43.8 [stable] is released!
Replies: 169
Views: 53799

Re: v6.43.8 [stable] is released!

Updated from 6.43.7 to 6.43.8 without any problems.
Wifi works as expected, no problems
by eddieb
Fri Dec 14, 2018 11:13 am
Forum: Announcements
Topic: Product comparison matrix
Replies: 30
Views: 14564

Re: Product comparison matrix

There is column named "Number of DC inputs".
"Number of DC inputs" is not the same as dual power supply like the 2x 220v in some CCR types needed for redundant datacenter setups ...
by eddieb
Fri Dec 14, 2018 10:29 am
Forum: Announcements
Topic: Product comparison matrix
Replies: 30
Views: 14564

Re: Product comparison matrix

A tab with dual power supply possibility would be nice ...

And the same table with discontinued devices ...
by eddieb
Thu Dec 06, 2018 6:33 pm
Forum: Beginner Basics
Topic: Problem upgrade RouterOS CCR1036-12G-4S
Replies: 7
Views: 1303

Re: Problem upgrade RouterOS CCR1036-12G-4S

If you upload new versions from all additional packages together with the main package, you should be able to upgrade.
by eddieb
Wed Dec 05, 2018 8:47 am
Forum: Announcements
Topic: v6.43.7 [stable] is released!
Replies: 53
Views: 19873

Re: v6.43.7 [stable] is released!

Upgraded from 6.43.4 -> 6.43.7
using dude to push the packages on

CCR1009-8G-1S (2x ipsec/l2tp)
CRS125-24G-1S
RB1100
RB962UiGS-5HacT2HnT (10pc)
RB951
RB750GL
RB2011UAS-RM
CHR running dude

without any issues
by eddieb
Wed Nov 14, 2018 11:15 pm
Forum: General
Topic: TWO CCRs FULLY UPGRADED AND STILL EXPLOITED (ROOTED) [SOLVED]
Replies: 16
Views: 3872

Re: TWO CCRs FULLY UPGRADED AND STILL EXPLOITED (ROOTED) [SOLVED]

Yes,

it must have been exploited before the upgrades.
upgrading does not remove the exploits, it just fixes the holes.
IF your device is exploited, the only thing you can do is netinstall
by eddieb
Sat Oct 27, 2018 12:29 pm
Forum: The Dude
Topic: How to use it?
Replies: 2
Views: 2868

Re: How to use it?

Is there any new information on how the Syslog server Dev is going for The Dude? How do I go about specifying an IP range to be Blacklisted? "blacklisting" is done inside ROS on the device where the dude runs. Create /ip firewall address-list no-discover and put the ip's you don't want to...
by eddieb
Fri Oct 19, 2018 11:43 am
Forum: The Dude
Topic: Dude 4.0Beta3 not working correctly over Wine
Replies: 6
Views: 4030

Re: Dude 4.0Beta3 not working correctly over Wine

4.0* is way too old and not supported for a long time, use the current version.
by eddieb
Thu Oct 18, 2018 5:06 pm
Forum: Announcements
Topic: v6.43.4 [stable] is released!
Replies: 78
Views: 33452

Re: v6.43.4 [stable] is released!

Upgraded thru DUDE without any issues

CCR1009-8G-1S (running multiple l2tp/ipsec tunnels)
RB1100
RB750GL
CRS125-24G-1S
RB962UiGS-5HacT2HnT (10x)
CHR running DUDE
by eddieb
Sat Oct 13, 2018 12:17 pm
Forum: General
Topic: Unable to get full gigabit speed on RB750Gr3
Replies: 33
Views: 13243

Re: Unable to get full gigabit speed on RB750Gr3

better test with http://www.dslreports.com/speedtest ...
gives you a better insight in what is happening
Screen Shot 2018-10-13 at 11.22.39.png
by eddieb
Wed Oct 03, 2018 3:04 pm
Forum: The Dude
Topic: Upgrade Wireless device on Dude
Replies: 17
Views: 5967

Re: Upgrade Wireless device on Dude

You might want to try to put just the routeros package on the dude.
the wireless packages is included in the Main package

I upgraded lots of devices thru the dude and that worked flawlessly

Eddie
by eddieb
Thu Sep 27, 2018 11:01 pm
Forum: General
Topic: Suspect script foun
Replies: 3
Views: 1510

Re: Suspect script foun

the script pointed to a u113.rsc that was in /file and an 113.sh schedule and an udp111 schedule that also seems removed....

the real "bad" stuff happens inside that scripts ...

do a netinstall on that device with all user passwords changed and double check your input rules
by eddieb
Fri Sep 21, 2018 11:07 am
Forum: The Dude
Topic: The Dude 6.40.8 - db failure: database disk image is malformed
Replies: 37
Views: 14395

Re: The Dude 6.40.8 - db failure: database disk image is malformed

FWIW

I updated Dude with every release, running 6.43.2 now.
Dude runs on a CHR vm over here.
Running for more than a year without problems.
Creating daily backups but never needed to restore
by eddieb
Thu Sep 20, 2018 1:44 pm
Forum: Announcements
Topic: v6.43.1 [stable] and v6.43.2 [stable] are released!
Replies: 186
Views: 56531

Re: v6.43.1 [stable] is released!

I just upgraded my RB2011UAS-RM from 6.43 to 6.43.1 ...
no problems.
by eddieb
Tue Sep 18, 2018 6:36 pm
Forum: General
Topic: NTFS support
Replies: 38
Views: 10460

Re: NTFS support

+1 for me too.
Separate packages to allow removal of this soho stuff I don't want.
by eddieb
Tue Sep 18, 2018 5:48 pm
Forum: Announcements
Topic: v6.43.1 [stable] and v6.43.2 [stable] are released!
Replies: 186
Views: 56531

Re: v6.43.1 [stable] is released!

Upgraded thru DUDE without any issues
CCR1009-8G-1S (running multiple l2tp/ipsec tunnels)
RB1100
RB750GL
CRS125
RB962UIGS (10x)
CHR running DUDE
by eddieb
Tue Sep 18, 2018 9:43 am
Forum: Announcements
Topic: Winbox vulnerability: please upgrade
Replies: 329
Views: 126860

Re: Winbox vulnerability: please upgrade

NEVER make updates automatic !
We want to control the moment of update and rebooting devices.
The way it is done now is sufficient, announcements thru mailing and on this forum is fine.
by eddieb
Sun Sep 16, 2018 2:15 pm
Forum: The Dude
Topic: Dude 6.41.2 lost SNMP interfaces
Replies: 26
Views: 8885

Re: Dude 6.41.2 lost SNMP interfaces

running

dude -> vacuum-db

solved this a couple of times for me
by eddieb
Sun Sep 16, 2018 12:46 pm
Forum: General
Topic: Mikrotik attacked. No idea how.
Replies: 7
Views: 1650

Re: Mikrotik attacked. No idea how.

- use remote syslog to analyze what is happening - use torch to see what is causing the amount of traffic - use packet sniffing for detailed packet info of course - do not use the admin user, create your own, disable admin - change passwords of ALL users after you think you have been compromised - u...
by eddieb
Mon Sep 10, 2018 6:31 pm
Forum: Announcements
Topic: v6.43 [current] is released!
Replies: 148
Views: 42520

Re: v6.43 [current] is released!

Upgraded without any issues
RB2011UAS
RB1100
RB750GL
CCR1009
CRS125
RB962UIGS (10x)
CHR
CHR-DUDE
by eddieb
Thu Sep 06, 2018 9:26 pm
Forum: General
Topic: RouterOS v6.42.7 showing old web interface
Replies: 5
Views: 1248

Re: RouterOS v6.42.7 showing old web interface

I have exactly the same on my RB1100 ...
by eddieb
Thu Sep 06, 2018 5:53 pm
Forum: General
Topic: CCR1009-8G-1S not discovered in winbox
Replies: 1
Views: 716

CCR1009-8G-1S not discovered in winbox

Hi, I loaded an export (only changed the management IP) of my RB2011UAS into my CCR1009-8G-1S all seems ok, and I can connect to the CCR in winbox on MAC and on IP .. BUT, in winbox discovery I see all my other MT devices except the CCR ... on the upstream CSR125 I notice : > ip neighbor print # INT...
by eddieb
Thu Aug 30, 2018 6:18 pm
Forum: RouterBOARD hardware
Topic: Suggestion: release routers with preinstalled Factory Software from Bugfix release chain
Replies: 6
Views: 1302

Re: Suggestion: release routers with preinstalled Factory Software from Bugfix release chain

Hmm,
you are right, next time I should put my glasses on before writing ...
Sorry
by eddieb
Thu Aug 30, 2018 6:07 pm
Forum: RouterBOARD hardware
Topic: Suggestion: release routers with preinstalled Factory Software from Bugfix release chain
Replies: 6
Views: 1302

Re: Suggestion: release routers with preinstalled Factory Software from Bugfix release chain

DON'T do this Mikrotik, very bad idea !!!
RC is development and should be treated as beta software !
by eddieb
Mon Aug 20, 2018 9:07 pm
Forum: Announcements
Topic: v6.42.7 [current] is released!
Replies: 159
Views: 43805

Re: v6.42.7 [current] is released!

Upgraded without problems ..

CRS125
CHR + Dude
RB750
RB951
RB962 (9x)
RB1100
RB2011 (2 IPSEC tunnels)
by eddieb
Sat Aug 18, 2018 10:00 am
Forum: Scripting
Topic: Blacklist Filter (Development Topic)
Replies: 191
Views: 43996

Re: Blacklist Filter (Development Topic)

Dave ?

I noticed a problem in my logging, is downloading the ?priority=1 not working anymore ?

Eddie
by eddieb
Sat Jul 14, 2018 9:33 am
Forum: Announcements
Topic: v6.42.6 [current]
Replies: 102
Views: 41770

Re: v6.42.6 [current]

Upgraded from .5 to .6 went smooth, no problems
by eddieb
Wed Jun 27, 2018 2:47 pm
Forum: Announcements
Topic: v6.42.5 [current]
Replies: 124
Views: 34851

Re: v6.42.5 [current]

Updated from 6.42.3 -> 6.42.5 without problems.
RB2011 (gateway with 2 ipsec/l2tp tunnels )
RB1100/CRS125/RB750
RB962(9pc)/RB951 accesspoints
CHR with dude
all went smooth, keep up the great work !
by eddieb
Mon Jun 25, 2018 9:45 am
Forum: Announcements
Topic: v6.42.4 [current]
Replies: 93
Views: 24943

Re: v6.42.4 [current]

All this complaining about how thing used to be has nothing to do with this release, please stay on topic !

I updated all my devices to this current release, no problems seen so far.
(RB2011/RB1100/RB962/CRS125/CHR)
by eddieb
Tue Jun 05, 2018 8:19 am
Forum: General
Topic: Add print server (printer support)
Replies: 141
Views: 79010

Re: Add print server (printer support)

NO, please DO NOT add this feature !!!
Let ROS do what it is supposed to do
by eddieb
Wed May 30, 2018 5:00 pm
Forum: Announcements
Topic: Winbox 3.14 released!
Replies: 77
Views: 40639

Re: Winbox 3.14 released!

the wireless menu not show and not work with this winbox
works fine here with winbox 3.14 to RB962 running ROS 6.42.3
by eddieb
Tue May 29, 2018 2:37 pm
Forum: Announcements
Topic: v6.43rc [release candidate] is released!
Replies: 557
Views: 156493

Re: v6.43rc [release candidate] is released!

That warning is perfectly clear. Unfortunately some people don't read.
by eddieb
Tue May 29, 2018 10:38 am
Forum: Wireless Networking
Topic: RB962UiGS-5HacT2HnT hAP ac capacity problem
Replies: 23
Views: 2627

Re: RB962UiGS-5HacT2HnT hAP ac capacity problem

please post an export of your config. please use a wired connection and retry dslreports what are your wireless conditions ? distance ? number of walls ? type of walls ? number of active clients ? Wired connection has 100 Mbit/s no problem. I have empty freq 5GHz about my home - 0 walls and router ...
by eddieb
Tue May 29, 2018 10:23 am
Forum: Wireless Networking
Topic: RB962UiGS-5HacT2HnT hAP ac capacity problem
Replies: 23
Views: 2627

Re: RB962UiGS-5HacT2HnT hAP ac capacity problem

please post an export of your config.

please use a wired connection and retry dslreports

what are your wireless conditions ? distance ? number of walls ? type of walls ? number of active clients ?
by eddieb
Mon May 28, 2018 4:46 pm
Forum: Wireless Networking
Topic: RB962UiGS-5HacT2HnT hAP ac capacity problem
Replies: 23
Views: 2627

Re: RB962UiGS-5HacT2HnT hAP ac capacity problem

registration does not mean actual wireless speed. it might be a lot less ...
Test your connection speed with http://www.dslreports.com/speedtest

And show us your config
by eddieb
Sat May 26, 2018 8:06 am
Forum: Announcements
Topic: v6.42.3 [current]
Replies: 80
Views: 32080

Re: v6.42.3 [current]

RB2011 / RB1100 / RB951 / RB962 (9pc) / CRS125 / CHR / CHR-Dude all updated to 6.42.3.
no problems
by eddieb
Thu May 24, 2018 8:06 am
Forum: Announcements
Topic: v6.43rc [release candidate] is released!
Replies: 557
Views: 156493

Re: v6.43rc [release candidate] is released!

Note that release candidate versions are published strictly for testing purposes and should not be used on production routers.
This quote says it all ...
rc releases are BETA releases, don't use it if you can't lose it !
by eddieb
Sat May 19, 2018 1:24 pm
Forum: General
Topic: SMB file sharing
Replies: 7
Views: 3880

Re: SMB file sharing

Use function separation ...
A ROUTER is made for routing/firewall
A FILESERVER/NAS is made for SMB (and perhaps other) Fileshareing options
by eddieb
Fri May 18, 2018 7:51 pm
Forum: General
Topic: Mikrotik RB962UiGS - slow gigabit speed
Replies: 11
Views: 3206

Re: Mikrotik RB962UiGS - slow gigabit speed

please post your config
/export hide-sensitive

Without a config we are not capable to help you
by eddieb
Fri May 18, 2018 9:44 am
Forum: Announcements
Topic: v6.42.2 [current]
Replies: 65
Views: 21809

Re: v6.42.2 [current]

upgraded from 6.42.1 to 6.42.2 on RB2011/RB1100/CRS125/RB962(9pc)/RB951/CHR/CHR-dude without any issues
by eddieb
Mon May 07, 2018 4:11 pm
Forum: The Dude
Topic: count number of rows matching in oid ?
Replies: 6
Views: 2185

Re: count number of rows matching in oid ?

tnx for thinking with me ...

any other suggestions ?
by eddieb
Thu May 03, 2018 8:19 pm
Forum: General
Topic: A new scan has started
Replies: 10
Views: 2013

Re: A new scan has started

It should not be THAT easy to get a ROS version ... without authentication

I notice the same IP sending syn packets to me too for the past 7 days at least ...
by eddieb
Thu May 03, 2018 4:14 pm
Forum: The Dude
Topic: count number of rows matching in oid ?
Replies: 6
Views: 2185

Re: count number of rows matching in oid ?

That is strange, it does here : snmpwalk -v2c -c public -On mt .1.3.6.1.4.1.14988.1.1.6.1 .1.3.6.1.4.1.14988.1.1.6.1.0 = Gauge32: 66 snmpwalk -v2c -c public -On mt .1.3.6.1.2.1.9999.1.1.6.4.1.4 | wc -l 66 the array .1.3.6.1.2.1.9999.1.1.6.4.1.4 includes the expired static leases static : snmpwalk -v...
by eddieb
Thu May 03, 2018 3:41 pm
Forum: The Dude
Topic: count number of rows matching in oid ?
Replies: 6
Views: 2185

Re: count number of rows matching in oid ?

That wil give me the total number, including the expired ... I want the total for active static and active dynamic
by eddieb
Thu May 03, 2018 12:46 pm
Forum: The Dude
Topic: count number of rows matching in oid ?
Replies: 6
Views: 2185

count number of rows matching in oid ?

Hi, I want to count the number of dhcp leases in ROS, for now I use array_find(oid_column("1.3.6.1.2.1.9999.1.1.6.4.1.4"),"dynamic (2)") but array_find only returns the number of the first row in the array where it finds "dynamic (2)". So, great to find IF there are any...
by eddieb
Thu May 03, 2018 11:58 am
Forum: Announcements
Topic: v6.43rc [release candidate] is released!
Replies: 557
Views: 156493

Re: v6.43rc [release candidate] is released!

problems should be reported to support@mikrotik.com not on this forum.
by eddieb
Wed May 02, 2018 10:26 pm
Forum: The Dude
Topic: add 2 lines in graphs together ?
Replies: 8
Views: 2070

Re: add 2 lines in graphs together ?

Found it ...
not that hard after all, tnx for the suggestions.
create a datasource for device "none" and put some function code inside
create a graph for this new datasource
Screen Shot 2018-05-02 at 21.24.28.png
by eddieb
Wed May 02, 2018 7:08 pm
Forum: The Dude
Topic: add 2 lines in graphs together ?
Replies: 8
Views: 2070

Re: add 2 lines in graphs together ?

The 2 OID are from different devices ...
I know that would be the direction to look into, but I can not find how to add snmp oid from 2 (or more) devices into 1 datasource ...
by eddieb
Wed May 02, 2018 4:31 pm
Forum: The Dude
Topic: add 2 lines in graphs together ?
Replies: 8
Views: 2070

Re: add 2 lines in graphs together ?

The screenshot below shows a graph with 2 lines from separate devices. I want to stack them, not to show them side by side ... I can not find a wy to do that ...
So 1 line with the total of both devices added together.
Screen Shot 2018-05-02 at 15.28.45.png
by eddieb
Wed May 02, 2018 2:05 pm
Forum: The Dude
Topic: add 2 lines in graphs together ?
Replies: 8
Views: 2070

Re: add 2 lines in graphs together ?

Hi,

The 2 lines in one graph is not a problem, but I want to stack the values to see a maximum in the graph ...
by eddieb
Wed May 02, 2018 8:44 am
Forum: The Dude
Topic: add 2 lines in graphs together ?
Replies: 8
Views: 2070

add 2 lines in graphs together ?

Hi,
I have graphs of connected wifi cients per AP.
I want to add the values togehter into one line in a graph to see the total of connected wifi users in my network.
Any suggestions in how to add those values together ?

regards,

Eddie
by eddieb
Thu Apr 26, 2018 8:24 pm
Forum: General
Topic: Urgent feature request: Bind IP services to a specific IP / Interface
Replies: 4
Views: 1306

Re: Urgent feature request: Bind IP services to a specific IP / Interface

+1 for this request.
It should be possible to bind IP services to a specific IP and/or a specific interface.
We do so on our linux servers allways !
by eddieb
Thu Apr 26, 2018 4:06 pm
Forum: Announcements
Topic: v6.42.1 [current]
Replies: 272
Views: 65719

Re: v6.42.1 [current]

No problems with 6.42.1 over here, tnx for the great work MT !
by eddieb
Tue Apr 24, 2018 2:29 pm
Forum: Announcements
Topic: Advisory: Vulnerability exploiting the Winbox port [SOLVED]
Replies: 204
Views: 216454

Re: Advisory: Vulnerability exploiting the Winbox port

always blame the knife if you cut yourself ...
by eddieb
Tue Apr 24, 2018 1:49 pm
Forum: Beginner Basics
Topic: upgrading RouterOS
Replies: 8
Views: 1865

Re: upgrading RouterOS

coming from 6.35 the easiest way to me seems to update to 6.40.8 in the bugfix channel.
Depending on the complexity of your config 6.40.8 still has the old master-port while 6.41+ has the new bridge implementation.
If updating to 6.40.8 went fine you might try 6.42.1 ...
by eddieb
Mon Apr 23, 2018 5:44 pm
Forum: Announcements
Topic: v6.42.1 [current]
Replies: 272
Views: 65719

Re: v6.42.1 [current]

upgraded RB750, RB962 (8pc), RB1100, RB2011, CRS125, CHR, CHR (dude) without issues, tnx for the fast fix !
by eddieb
Sat Apr 21, 2018 12:43 pm
Forum: Beginner Basics
Topic: Mikrotik vulnerability
Replies: 16
Views: 4510

Re: Mikrotik vulnerability

Problems like this should be reported directly to support@mikrotik.com
NEVER allow management on your devices from internet. Fix your firewall.
Pick a strong password, took only 3 seconds according to your log ...
by eddieb
Thu Apr 19, 2018 5:57 pm
Forum: Announcements
Topic: v6.42 [current]
Replies: 147
Views: 41663

Re: v6.42 [current]

DHCP client and server work as expected. PPPoE client also ... No problems on my RB2011 here
by eddieb
Tue Apr 17, 2018 5:51 pm
Forum: Announcements
Topic: v6.42 [current]
Replies: 147
Views: 41663

Re: v6.42 [current]

Updated RB1100, RB2011, CRS125, RB962 (hAP AC) (5x) without any issues, 2.4G/5G wifi work as expected, thanks !
by eddieb
Sat Apr 14, 2018 10:24 am
Forum: Announcements
Topic: v6.42rc [release candidate] is released!
Replies: 538
Views: 135737

Re: v6.42rc [release candidate] is released!

There is NO 6.42
Only 6.42rc [release candidate]
RC are BETA versions that can be used to TEST certain new (or fixed) features.
BETA software should not be run on critical devices, just on test networks.
by eddieb
Tue Apr 10, 2018 5:20 pm
Forum: Beginner Basics
Topic: Dutch tutorials
Replies: 5
Views: 1089

Re: Dutch tutorials

Nice site plisken, seen it before, good to see updates !
Keep up the good work !
by eddieb
Tue Apr 10, 2018 10:19 am
Forum: Announcements
Topic: v6.41.4 [current]
Replies: 37
Views: 15267

Re: v6.41.4 [current]

Updated RB2011UAS, RB750GL, RB1100, RB962 (9x), CRS125 and CHR running Dude without any issues
by eddieb
Sat Mar 31, 2018 7:48 pm
Forum: Announcements
Topic: Urgent security advisory
Replies: 110
Views: 119390

Re: Urgent security advisory

I fully agree, upgrading is part of general maintenance and should always be done in a controlled matter ...
Maintenance takes time and cost money.
by eddieb
Mon Mar 26, 2018 12:52 pm
Forum: Wireless Networking
Topic: hAP ac 5GHz max speed
Replies: 52
Views: 17705

Re: hAP ac 5GHz max speed

config is pretty default ... plain accespoint, all interfaces in 1 bridge, no firewall rules, dhcp from core-router /interface wireless set [ find default-name=wlan1 ] band=2ghz-g/n channel-width=20/40mhz-eC \ disabled=no distance=indoors frequency=2462 mode=ap-bridge \ security-profile=home ssid=ho...
by eddieb
Mon Mar 26, 2018 11:46 am
Forum: Scripting
Topic: Blacklist Filter update script
Replies: 632
Views: 148910

Re: Blacklist Filter update script

Thanks for all the effort you put into this Dave.
I was using your service for over a year and it helped me to keep my network save.
I surely would consider a small subscription fee to keep it

Eddie
by eddieb
Mon Mar 26, 2018 11:37 am
Forum: Wireless Networking
Topic: hAP ac 5GHz max speed
Replies: 52
Views: 17705

Re: hAP ac 5GHz max speed

Hi, I can confirm that the hAP AC connects with 3 chans to a newer MacBookPro on 1G+ Thruput tested with iperf3 from this MBP to a server on the wired part of my local network On 1GB wire I get approx 960Mbit/s On 5GHz wifi I get approx 530Mbit/s This 530Mbit/s seems about the max because the hAP AC...
by eddieb
Tue Mar 13, 2018 8:42 am
Forum: Announcements
Topic: v6.41.3 [current]
Replies: 139
Views: 42643

Re: v6.41.3 [current]

strods - I see this SIM option on my RB2011 and CRS125. On the RB1100 it is not visible.
by eddieb
Mon Mar 12, 2018 9:12 pm
Forum: Announcements
Topic: v6.41.3 [current]
Replies: 139
Views: 42643

Re: v6.41.3 [current]

upgraded from 6.41.2 -> 6.41.3 without any issues on RB962 / RB1100 / RB2011 / CRS125

tnx
by eddieb
Tue Feb 27, 2018 3:33 pm
Forum: SwOS
Topic: RB260GS does not like version 2.7
Replies: 18
Views: 8095

Re: RB260GS does not like version 2.7

I upgraded my 4 pcs of RB260GS to 2.7 without any problems, very nice switches, working fine
by eddieb
Mon Feb 26, 2018 3:32 pm
Forum: Announcements
Topic: v6.40.6 [bugfix] is released!
Replies: 58
Views: 21871

Re: v6.40.6 [bugfix] is released!

Hmm, problem. Eddie Please provide support output file to suport@mikrotik.com so we could compare that configuration to see why it would not work in v6.40.6 I will create them in a couple of hours, the hAP AC are manged by CAPSMAN in my 2011, do you need the supout from the hAP AC, the 2011 or both...
by eddieb
Mon Feb 26, 2018 1:33 pm
Forum: Announcements
Topic: v6.40.6 [bugfix] is released!
Replies: 58
Views: 21871

Re: v6.40.6 [bugfix] is released!

Hmm, problem. I upgraded my 3 hAP AC from 6.39.3 to 6.40.6 .. All seemed OK but the office W10 laptop refused to connect to the wifi ... To bad there is no useable logging, the MT logging just says station leaving and the W10 logging says "unable to connect" ... I donwgraded to 6.39.3 and ...
by eddieb
Wed Feb 14, 2018 2:05 pm
Forum: Announcements
Topic: v6.41.2 [current]
Replies: 125
Views: 40848

Re: v6.41.2 [current]

updated my RB2011UAS from 6.40.5 to 6.41.2 ...
everything went smooth.
2 IPSEC site-to-site tunnels
DHCP and DNS server
PPPOE on wan

look fine here
by eddieb
Thu Jan 04, 2018 12:53 pm
Forum: Wireless Networking
Topic: Multiple APs with ethernet backhaul home network advice.
Replies: 7
Views: 2732

Re: Multiple APs with ethernet backhaul home network advice.

hmm,

running capsman with 3x hAP AC here without problems, almost only Apple devices here ...
At our computer club meeting (4 times a year) I run 5x hAP AC to handle about 300 iOS devices in a community center, no problems
Great devices, you just need to know how to configure them !

Eddie
by eddieb
Wed Jan 03, 2018 12:45 pm
Forum: Wireless Networking
Topic: Wireless issues - can't figure out why
Replies: 7
Views: 2120

Re: Wireless issues - can't figure out why

Which ROS version are you running ? I have 3x 962's running here without issues ... needed to set the DHCP lease for wireless devices to 8h, shorter gave me problems with disconnecting iOS devices due to bad performance issues mentioned here in the forums, all my 962's are running ROS 6.39.3 (bugfix...
by eddieb
Fri Dec 15, 2017 10:06 am
Forum: Wireless Networking
Topic: Problem with haP AC
Replies: 9
Views: 1927

Re: Problem with haP AC

I have 5 of these RB962 devices running as AP, they work great, wireless coverage is fine, handling 200-300 clients simultaniously without problems.
by eddieb
Thu Oct 26, 2017 8:44 am
Forum: The Dude
Topic: random probe re-appearing after restart dude
Replies: 0
Views: 602

random probe re-appearing after restart dude

hi,

As I don't want the random (50:50) probe in my dude maps, I deleted it from the probe list.
After restarting dude 6.40.4 it magicly re-appears, is there a way to stop this ?

regards,

Eddie
by eddieb
Wed Oct 04, 2017 12:27 pm
Forum: Announcements
Topic: v6.40.4 [current]
Replies: 103
Views: 34143

Re: v6.40.4 [current]

CHR dude 6.40.3 -> 6.40.4

all SNMP interface traffic reads are gone, showing ?/?
by eddieb
Fri Sep 01, 2017 9:44 pm
Forum: Announcements
Topic: v6.40.3 [current]
Replies: 95
Views: 34249

Re: v6.40.3 [current]

upgraded RB2011UAS (gateway running CAPSMAN), 8x RB962 (CAP), CRS125, RB1100 without noticable problems.
by eddieb
Fri Aug 18, 2017 4:10 pm
Forum: General
Topic: Mikrotik Chat
Replies: 37
Views: 9500

Re: Mikrotik Chat

irc.freenode.net ##mikrotik
by eddieb
Thu Jul 20, 2017 9:16 am
Forum: Scripting
Topic: Blacklist Filter update script
Replies: 632
Views: 148910

Re: Blacklist Filter update script

Morning,

tnx for explaining the script rights issue, to bad we are struggling with that, for now it works here.

@Dave
I noticed the script got updated to 2.0.3 in the past 12 hours, it would be nice to see some kind of changelog if possible ?

Keep up the good work !

Eddie
by eddieb
Wed Jul 19, 2017 8:36 am
Forum: Scripting
Topic: Blacklist Filter update script
Replies: 632
Views: 148910

Re: Blacklist Filter update script

Hi Dave, tnx for the updates, it seems to work fine on my RB2011 and my RB1100. But, I have a very strange problem on my test VM CHR ... Until 2.0.1 it worked fine, with the latest it wipes my blacklistUpdate and blacklistScriptUpdater ... they are EMPTY ... Screen Shot 2017-07-19 at 07.29.28.png in...
by eddieb
Tue Jul 18, 2017 7:41 pm
Forum: Scripting
Topic: Blacklist Filter update script
Replies: 632
Views: 148910

Re: Blacklist Filter update script

Hi Dave,
tnx for the hint, that did it. For some reason the scripts where created with only read, write, test ...

It works now

Eddie
by eddieb
Tue Jul 18, 2017 10:35 am
Forum: Scripting
Topic: Blacklist Filter update script
Replies: 632
Views: 148910

Re: Blacklist Filter update script

Hi Dave, first my compliments for your work and all the effort you put into this !!! I have updated a couple of different devices and most went fine without a glitch. Now I am struggling with a RB2011UiAS-2HnD and it does not work ... I installed the blinstall script, run it and the 2 scripts and 2 ...
by eddieb
Sat Jul 01, 2017 11:00 am
Forum: Scripting
Topic: Blacklist Filter update script
Replies: 632
Views: 148910

Re: Blacklist Filter update script

tnx,

scripting can be a pain, sometimes it just does not work ...
Count filterBlacklist=0 rawBlacklist=30
it works ;-)
by eddieb
Sat Jul 01, 2017 10:37 am
Forum: Scripting
Topic: Blacklist Filter update script
Replies: 632
Views: 148910

Re: Blacklist Filter update script

Collecting how many packets are blocked by the Blacklist: #### Share how many packets are blocked by the Blacklist on your device :local filterBlacklist "0"; :local rawBlacklist "0"; :if ([:len [/ip firewall filter find src-address-list="dynamicBlacklist"]] != 0) do={s...
by eddieb
Mon Jun 19, 2017 11:28 am
Forum: General
Topic: Which USB 4G LTE works ??? Please update wiki ...
Replies: 1
Views: 876

Which USB 4G LTE works ??? Please update wiki ...

ls, I am looking for a working USB 4G LTE stick. The wiki seems outdated, many of the mentioned devices are not availiable anymore. Please update the wiki with user reports on working USB sticks. Even this forum is unclear, only a few reports. Please post you reports for us who are searching. People...
by eddieb
Fri Jun 09, 2017 9:11 am
Forum: Scripting
Topic: Blacklist Filter update script
Replies: 632
Views: 148910

Re: Blacklist Filter update script

Hi Dave, thanks for your response. It was a bit complex but I did manage to add the subnet in a whitelist and that works for now... I am aware of the problems that might cause such a whitelist. In this case the subnet is from a local provider with many customers fighting spam ... sometimes one of th...
by eddieb
Thu Jun 08, 2017 8:37 pm
Forum: Scripting
Topic: Blacklist Filter update script
Replies: 632
Views: 148910

Re: Blacklist Filter update script

Hi Dave, I use your dynamic blacklist and it suits well. For some reason a subnet from which I really need to use 1 address from appeared in one of the lists loaded into dynamicBlacklist ... It would be a great help if I could whitelist a subnet inside the script somehow ... Keep up the great work E...
by eddieb
Sat Apr 29, 2017 3:22 pm
Forum: Announcements
Topic: v6.39 [current]
Replies: 89
Views: 43235

Re: v6.39 [current]

Upgraded my 2011 to 6.39 without problems.
- IPSEC-IPSEC tunnel works,
- IPSEC-L2TP dailin works,
- Firewall rulez works,
- DHCP works,
- CAPS-MAN (2x 962, 1x 2011) works ...
no problems so far

E.
by eddieb
Fri Oct 07, 2016 10:50 pm
Forum: Announcements
Topic: v6.37.1 [current] is released!
Replies: 144
Views: 47767

Re: v6.37.1 [current] is released!

I had the problem of add a new static DNS entry and then all connection (web, email, etc) redirect to the address. This generate a big problem in a company with computers DNS cache's. /ip dns set allow-remote-requests=yes cache-size=10240KiB servers=\ 8.8.8.8,8.8.4.4 add address=192.168.x.88 name=l...
by eddieb
Wed Jun 29, 2016 4:37 pm
Forum: General
Topic: stop MT triggering CISCO BPDU guard
Replies: 3
Views: 3164

Re: stop MT triggering CISCO BPDU guard

We just configured a CRS-125 as switch using the examples on http://wiki.mikrotik.com/wiki/Manual:CRS_examples ... Config is like http://www.breekeenbeen.nl/2014/12/11/mikrotik-vlan-switching-without-bridging/ the acces port is triggering the BPDU guard on an attached cisco switch. We did some packe...
by eddieb
Thu Dec 03, 2015 10:17 pm
Forum: General
Topic: stop MT triggering CISCO BPDU guard
Replies: 3
Views: 3164

stop MT triggering CISCO BPDU guard

Hi, we are connecting some CRS-125 configured as switches to an CISCO switch. both switches should NOT see each other switch net works ... edge-edge connection ... But, we are not able to stop switch packets on the connection, the Cisco keeps shutting the port as bpdu-guard kicks in. What setting do...