MikroTik

raymondr15

Routing filters seem to not be working in v7.2rc4.

raymondr15

If I get the "not enough disk space" error then I just reboot the device and then run the update straight after the reboot and it works.

raymondr15

Hi, I have my main router(RB2011UiAS-RM) and connected to that on ether4, I have another router(RB750) running hotspot on vlan10 back to my main router on the same port but on vlan10, I then have my main router bridging vlan10 to other bridges/interfaces(local and backbone) from ether4.10(vlan10) My...

raymondr15

Login via winbox, on the left, click "Queues" You should get the "Queue List" window: Queue List.PNG Click the "+" button to add a queue: Plus.PNG You'll now get the "New Simple Queue" window: New Simple Queue.PNG Where is says "target", select the i...

raymondr15

I have a hAP ac and would like to know how limit download and upload bandwidth by LAN Port only (not by class or priority or anithing like that)? For example: LAN2: unlimited LAN3: limited to 30.0 Mbps down and 3.0 Mbps up LAN4: limited to 5.0 Mbps down and 0.5 Mbps up Any guidance would be greatly...

raymondr15

In functions of course. I read the full changelogs, I read changes in each branch, but I dunno what functionality will be lost (for example) when switching to long-term from stable. Is such switch completely safe, or it needs further investigations? Maybe there is a diff of release trees hidden som...

raymondr15

raymondr15, E1uSiV3 - Please send supout file from your router to support@mikrotik.com Have done that already. I have tried upgrading to beta release and downgrading back to long-term release with the CPU still sitting at 100%. I'm guessing something in the 6.43.7 update changed something in the co...

raymondr15

Since upgrading from 6.43.4 to 6.43.7 on all of my MikroTik devices, API-SSL does not work. my management system keeps telling me my devices are down as It cannot login to any of the devices via API-SSL, I haven't tested plain API as I don't use it due to security reasons. I don't see any logs of fa...

raymondr15

Hi, I think I may have solved my problem. To me it look like if one of your routers have the same IP address on different interfaces, it then causes problems with OSPF, for example, on my main router, I have x3 IPIP-Tunnels, my IP config is: Tunnel 1: IP: 10.100.1.1, Network: 10.255.0.1 Tunnel 2: IP...

raymondr15

If it crashed, you should find "autosupout.rif" in files. It would be good to send it to support@mikrotik.com because they can read it and figure out what was wrong. From single screenshot, nobody will figure out anything. I have done that already with no reply. I always send supouts when...

raymondr15

I have just tried to move a bridge port to another bridge on my RB2011UiAS-RM and after changing, the router crashed and rebooted.

crash routeros.PNG

Router is running latest(ROS 6.43.4)

raymondr15

I know it has been removed my RB1100AHx2 is on v6.31, I have no reason to change firmware

Tell me what your Public IP is and then I might need to give you a reason to change your firmware.

raymondr15

It would be really nice if MikroTik would add the ability to graph health information such as voltage and temperature and no I'm not referring about SNMP and API, I am referring to tools->graphing,the same way as resources, queues and interfaces are graphed.

raymondr15

For some reason now, everything seems to be okay...

If this happens again, will post an update.

raymondr15

When it happens, do you lose connectivity for a short time on the link between the 2 routers? Is the neighbor state still at 'Full' or does i t go to '2-way' or other. I've experienced faults where if there's enough of a time-out to drop the session, but it returns before the 40s (Default) timer ru...

raymondr15

Hi, on one of my routers I am running into issues with OSPF, every +-30min the IP->Routes table drops all OSPF routes but still appears in LSA. I have to manually disable all networks in Routing->OSPF->Networks and then enable them to pick up the routes again. I have the same configuration on all of...

raymondr15

You can graph these using external NMS and SNMP which is more common of people with multi-router deployments and wanting to monitor things like that - although it could be handy to have on-device graphing as well. Thanks but I know that I can pull info from the devices via SNMP and API... I just wo...

raymondr15

Hi, It would be really nice if MikroTik would add the ability to graph health information such as voltage and temperature.

raymondr15

Since I have upgraded to RouterOS 6.43.2, none of my routers work with 10MHz channel width on the 5GHz interface, 2GHz works fine.

When setting the interface to 10MHz, I get "scan-list does not contain valid channels" and the "frequency" drop down menu is empty.

Bug?

raymondr15

I have exactly the same on my RB1100 ...

It's very odd and it is still showing the old page after updating to 6.43 that was just released.

raymondr15

Have you cleared the browser cache?

Yes, I have tried that and same thing, I shouldn't have to do that anyway as It used to show the newer login page and like I said, since I upgraded the OS to latest(6.42.7) it started showing the old page.

raymondr15

I have a RB750 running latest RouterOS 6.42.7 and webfig showing the old login page(see picture attached) I don't understand why it's showing the old page and this started since upgrading to 6.42.7. When I enter my credentials it goes to "/cfg" instead of "/webfig" If I manually ...

raymondr15

On my main router I have 3 ipip-Tunnels that go out onto my wAP LTE Kit and out the LTE interface as I have tunnels that go to 3 of my other routers that are only reachable via the LTE I have OSPF enabled on all my routers and currently my LTE and all ipip-Tunnels are disabled but I am getting traff...

raymondr15

I may have fixed my issue by changing the code around but still testing to so if this will happen again, so far its been a few hours and been working perfectly with the updated script: function get_routerOS_resource() { //Set globals global $API; global $Debug; //Get resource $API->write('/system/re...

raymondr15

Hi, I am running RouterOS 6.42.7 and have a PHP function that fetches the routers resource, voltage and identity function get_routerOS_resource() { //Set globals global $API; global $Debug; $API->write('/system/resource/print',true); $API->write('/system/health/print',true); $API->write('/system/ide...

raymondr15

P2P has been removed quite a while ago. What version of RouterOS do you have on each router?

There are different way you can block torrents in RouterOS, layer7, content, blocking ports...

raymondr15

Hi have just tried using the traffic generator on my Metal 5SHPn running ROS 6.42.6 and after clicking "start", I lost connection and noticed the device restarted with kernel failure.

Capture.PNG

raymondr15

So we had a bit of a rain and wind storm and somehow a bit of water got into one of my SXT's and now the unit does not boot. Luckily I had a LDF and a spare dish but could not mount it properly. Was in quite a hurry here and needed to get something up till I can replace the SXT. I felt like such an ...

raymondr15

Try using my method, watch my video: https://www.youtube.com/edit?o=U&video_id=3GbO2FCFWm0

raymondr15

Thank you!

No problem

raymondr15

Hi Again

Now I tried with 3 different SIM cards - That didn't make any difference.
Nobody else having issues with LTE & roaming?
Any clue is appreciated!

KR

Roaming is turned off by default, you can enable it by running

/interface lte set allow-roaming=yes

raymondr15

I have a wired lan in a building, and I need to put several MikroTik APs there. Currently I have put all of the APs in the bridged mode, so they just serve as an WiFi Ap with direct tap in to the local network. I was wandering there a better, more secure, robust? way to configure the APs? Currently...

raymondr15

Just add "/webfig" to the url and you'll get the WebFig login.

Like: http://111.223.3.61/webfig

post.PNG

raymondr15

Please add support for USB booting on RouterBoards so we can have the ability to install RouterOS onto a USB drive. Maybe in NetInstall also make it possible which device RouterOS should be installed to if there is more than one. ie: nand, USB... Reason 1: In case something happens to the nand chip ...

raymondr15

Just updated my RB2011UiAS-RM to 6.42.1
After updating and rebooting I go back and check for updates, it shows 6.42 instead of 6.42.1, this does not happen on any of my other routers.

Capture.PNG

raymondr15

Hi, I am having a bit of a problem with updating rules on my router via PHP API, how can I make my code first check if there is a difference in the setting for example first check the router if the rule/object is disabled and then apply or do nothing if everything matches perfectly. Currently whenev...

raymondr15

Hello ; who can inform me in details , what is the difference between 20/40 MHz eC & 20/40 MHz Ce ,,, thanks is advanced Hi, You choose which side to broadcast your channel width for 40Mhz, lets say you're using channel 5200 and you choose ec, the channel will broadcast from 5200 down to the lo...

raymondr15

Please add the ability to enable or disable successful login attempts for specific users, for example an API user, accounting software logging in and out updating information on the router.

raymondr15

I just realized earlier that after I updated to v6.42 that all my ip>firewall>raw rules were missing, not sure if that was the only config missing, I just restored a backup and everything was back.

raymondr15

What is the wireless XX option under Channel width?
I am wondering too

Was thinking that but would like to be sure

raymondr15

What is the wireless XX option under Channel width?

raymondr15

The routerOS changelog is showing the logs from v5.9 on all channels.

routeros_changelog.PNG

raymondr15

Hi, No matter what version of routerOS I use, I keep getting CPU spikes on my router and sometimes causing it to not respond for some time, it is less responsive on the later versions of routerOS and more responsive on the bux fix release (6.40.6) but still unacceptable. My modem is an huawei E367 a...

raymondr15

Hi, I noticed after upgrading to v6.41 that ether3 & ether5 were showing the exact same TX throughput all the time, I checked bridge settings and played around to see if there was a configuration issue from the upgrade, a saw that ether3's "auto isolate" was disabled, I reenabled it an...

raymondr15

Hi all, I need help with PHP API for adding an address to the address-list if it doesn't already exist and removing if it does exist. I am using routeros_api.class.php from https://wiki.mikrotik.com/wiki/API_PHP_class. I have tried this, the removal part works correctly but does not check if it exis...

raymondr15

Please add a time stamp on the output of the ip accounting web cgi page

raymondr15

Hi,

Whenever I connect my downlink mikrotik router via pppoe to the uplink server, the uplink router running v6.41rc44 starts acting around with all the ports flapping, even if nothing is conencted to them then after a few seconds the reboots itself.

PPPoE Server Crash.PNG

raymondr15

Hi, I am sitting in my office at work and have just update my RB2011UiAS-RM remotely, after rebooting the router am not able to access my router from the WAN side, my internet service provider is a WISP so I logged into my CPE and tried to SSH my router, I am able to login to the router but as soon ...

raymondr15

Hi, I am sitting in my office at work and have just update my RB2011UiAS-RM remotely, after rebooting the router am not able to access my router from the WAN side, my internet service provider is a WISP so I logged into my CPE and tried to SSH my router, I am able to login to the router but as soon ...

raymondr15

if you disable and enable the pppoe server interface? does it disconnect the clients?

Yes it will

raymondr15

You can program this using the mangle rules as you suggested or you can go the route of setting up all your clients within one subnet for each speed and have a priority for that rule. It depends how you have configured everyone so far. I prefer the simple queues because there is less resource overh...

raymondr15

YOu can create a PCQ with with the limit of 2 Mbps per second for both upload and download and pcq limit of 4mbps for both upload and download. Then create simple queues for either whole subnets or inidividula clients. Make all these simple queues have a parent. Place the parent at the bottom. And ...

raymondr15

Hi, I am looking for a way to use one queue in queue tree for every IP, basically want to add client's IP to address list and queue the same speed per IP's in the address list eg: /ip firewall mangle add action=mark-connection chain=forward comment=2Mbps_Client \ new-connection-mark=2Mbps_Client pas...

raymondr15

i want to block facebook for some users on my network. I'm sorting those users by mac address and putting to new address list by firewall 'add src to address list' rule. And i'm using Layer7 protocol for blocking facebook. ;;; mactoip chain=forward action=add-src-to-address-list address-list=Star a...

raymondr15

i want to block facebook for some users on my network. I'm sorting those users by mac address and putting to new address list by firewall 'add src to address list' rule. And i'm using Layer7 protocol for blocking facebook. ;;; mactoip chain=forward action=add-src-to-address-list address-list=Star a...

raymondr15

i want to restrict only 2 users ip for access only 5 website on internet, is this possible on mikrotik?
no

This is possible, why answer "no" after I first said it was possible?

raymondr15

Could it be possible to add a setting which can run a script or to beep the internal routerboard buzzer to beep when someone tries to login to the router(ssh, winbox, webfig...) Different beep codes for failed login attempt and granted logins. And maybe also for firewall rules instead of only just l...

raymondr15

Hello everyone, i have 10 users on routeros v5.20 on x86, i want to restrict only 2 users ip for access only 5 website on internet, is this possible on mikrotik? how can i manage restriction filter?

Hi, you can do this by using the webproxy or firewall filter rules by setting the domain in content.

raymondr15

Hi,

I am experiencing high loopback ping spikes on my router, I have even excluded 127.0.0.1 from my mangle mark and my CPU is not even hitting 100%, have had this problem for a long time with all ROS versions.

Also getting the spikes when pinging from other devices.

Capture.PNG

raymondr15

Hi I would like to know is there a way that I can turn off my hotspot users cap and a certain time and turn it back on at a certain time s my ISP has free time on my internet package and I would like my hotspot users to enjoy this.

Use a script with scheduler.

raymondr15

Hi, I've just purchased a HAP Lite RB941-2nD router 2 days ago, but before purchasing I've already watched a bunch of YouTube tutorials for the past few weeks on how to control bandwidth using simple queues. Basically what I need to do - is to limit the usage of download/upload on 6 client desktop ...

raymondr15

Dear Friends I hope u fine and well here I have question regarding miktrotik firewall hope to answer me! I want to know, How to allow access to blocked site for specific IP Address in Mikrotik? For example I have been blocked the "www.facebook.com" in my RB1100 mikrotik and now i want to ...

raymondr15

Hi, We put multiple 951s into venues currently with captive portal technology, unfortuntely the way our system has been developed, each AP acts completely independenty and roaming between access points brings up another captive portal authnentication, which is expected behaviour. We want to do this...

raymondr15

Hi, Can anyone help me configure OSPF on a VRRP interface? I have two Edge Routers, one master and one backup. Whenever the master edge router goes down, my default route is lost for a few seconds, then is distributed from the backup edge router. How can I make this immediate so there is no interrup...

raymondr15

Hello again,

I just used wireshark to sniff the packet to make sure how the password is sent to the radius.
It is sent as ENCRYPTED ... yahooo
thanks for your reply

Awesome! No problem

raymondr15

Thanks this worked!

No problem

raymondr15

http://i.imgur.com/peJXD8t.png Im using same LAN on two building using a wireless link of approximately 2km. In building 2, wireless link is connected to a switch, office computers are connected directly to port 2 - 11 of the switch. LAN in connected to port 1 of the switch. DSL modem ip 192.168.11...

raymondr15

Hello, I need a router for a hotel which is going to serve maximum 400 users. i am between RB3011UiAS-RM and CCR1009-8G-1S-1S+ . Feel free to suggest another device... I need to have a hotspot for the users accessing the internet and connect this router with wifi access points. The internet connect...

raymondr15

http://i.imgur.com/peJXD8t.png Im using same LAN on two building using a wireless link of approximately 2km. In building 2, wireless link is connected to a switch, office computers are connected directly to port 2 - 11 of the switch. LAN in connected to port 1 of the switch. DSL modem ip 192.168.11...

raymondr15

Perhaps I'm doing something wrong here? P2P link : one end has to be in "AP Bridge" mode, while the other end is in Station mode. With present-day 801.11ac radios I find the RSSI data from Winbox etc tends to jump around -- perhaps as modulation modes and channel width are changed, which ...

raymondr15

I am looking for a router which I will use in a hotel environment. We have a 200MBit connection. (I want to connect the router with the modem via ethernet) We want to connect several (~5) wifi access points to provide Internet to our guests. Every guest has to accept our terms of condition before h...

raymondr15

i would like to setup a dual wan configuration pcc use ports 1 and 2 then use port 3 as a dhcp server

i have two 10mb connections so i wanna combine and get 20mbs
thanks

Hi, have a look at my video: https://www.youtube.com/watch?v=dnLKyu4_md8

raymondr15

I have a routerOS for my x86 router. Recently I got problem in the update to 6.37. Upon restating after downloading, the router loses its connection i..e failed to boot up. Screen output showing directory / file missing. When I took out the msata and put it into a USB external drive, it boots but w...

raymondr15

Hello, everyone at MikroTik forums. I recently received a MikroTik Cloud Router Switch CRS109-8G-1S-2HnD-IN to replace my RB751U-2HnD. I started configuring it but decided I should upgrade the firmware (I was having issues with email alerts and the first suggestion I found was to upgrade firmware +...

raymondr15

I am trying to setup mangle for marking voip packets using a hEX lite. I have gone through and setup 4 rules, 2 to mark connections and 2 to mark packets. The pics im attaching where ive put the boxes all have matching IPs and ports in those boxes I just don't want to give the IP out. You are marki...

raymondr15

Hi all dear Engineers good time how to do bonding links , when , different bandwidth availble ! i have four link i using 4 Devices ( vDSL Modem of PATTON ) 3 Devices vDSL Modem , The Bandwidth is 12 Mbps of one modem ( 12*3 = 36 Mbps ) 1 Devices vDSL Modem , The Bandwidth is 60 Mbps how to recieve ...

raymondr15

Hello, I have a security concern and wanted to have your opinion. I am using RouterOS as hotspot server that is using external login page and freeradius as radius server. I am using HTTPS on the router and on the external login page. My question, when a user login , his password is moved as plain t...

raymondr15

Hello, I'm using my RouterBoard to connect to a wireless network. For example SSID: "network" There are multiple SSID's with the same name "network". The connection to the wireless network is working good. My questions is: Is it possible to specify the BSSID the MikroTik should ...

raymondr15

Greetings to everyone I have 4 wan and 100 user hotspot and 1output dhcp wiht out lode blance how do it every 1wan 25 user clint hotspot from that change route batween 4 wan I would mangle all the WAN connections together and then setup a PCQ queue to dynamically share all the bandwidth between all...

raymondr15

Each time the screen is drawn, the cpu can jump ~5%. We can optimize how often it is re-drawn, but some kind of CPU increase will be there, because any action requires the CPU. This includes all things you do in the device. Does this apply and if the lcd is in "standby" mode ? Or only if ...

raymondr15

Each time the screen is drawn, the cpu can jump ~5%. We can optimize how often it is re-drawn, but some kind of CPU increase will be there, because any action requires the CPU. This includes all things you do in the device. I understand but the 5% CPU draw should not cause ping spikes and affect pe...

raymondr15

Basically i am going to installed Mikrotik router behind firewall. I have my Firewall & Dhcp. In this case how do i configure Mikrotik router as captive portal & not use as firewall or Dhcp ?. Which one of these setups are you going to be using? Internet-Firewall-MikroTik or Internet-MikroT...

raymondr15

Thanks for your comment. I have not activated FastTrack ... Regarding the CPU load , usually between 50 and 70 % ... but while transferring between the networks values amount to 90-100 % I do not speak English. How could clear what's going on ?? Add these rules to your firewall filter /ip firewal...

raymondr15

I just disable the LCD's on all our mikrotik kit. Don't need them, do not want to worry that there *may* be a performance drop. I see what you are saying but the thing is for the people who purchased the specific model that has the LCD screen now cannot make use of it if they want full performance ...

raymondr15

Please contact support with attached supout file.

Sent the mail to support and there is no solution yet.

Capture.PNG

raymondr15

I configured a Mikrotik hot spot and added firewall rules to block p2p sites. But realised when the firewall rules are enabled but dooesn't get hits. Any help on this please?. Did you use this? /ip firewall filter add p2p=all-p2p action=drop If that is so, it does not work with p2p applications, yo...

raymondr15

Dear Sir, I have a question, we are buying software to maintain our space & they insist to buy Mikrotick router . Let me explain our nature of business. We are renting virtual office, i mean to say people can rent a cubical for 1 day to 1 month and we provide internet connection to them. Now le...

raymondr15

Thank you for you reply.

What you use to connect usermanager from remote location. Do you use http://wiki.mikrotik.com/wiki/API_in_C_Sharp or https://github.com/danikf/tik4net ? Or mayby something else ?

I'm talking about logging into the manager from a remote location (http://routerip/userman).

raymondr15

Hello , I have configurate a hotspot system on my router WiFi 192.168.1.25/24 and ethernet1 is 10.0.0.1 I have connected a camera to it with the address 10.0.0.200 but I can't reach to the camera , can't ping to it (wallgarden is open) from the router I have ping to 10.0.0.200 but when I connect to...

raymondr15

Hey guys, i hope you can help me. I want to create a script that change every 30 minutes the mac adress of a virtuell wireless interface I know i can set the mac with interface wireless set profile mac-address=xx...... But how would a script looks like when i want interface wireless set profile mac...

raymondr15

Hello everyone. I have a question. It turns out that we have a routerboard ... with several local networks set up and running ok. Its significance lies that we wanted to create another, in one of the remaining ports us and .... for some reason only reach 10MB values between networks ... ie Port 1 -...

raymondr15

Please contact support with attached supout file.

Will do.

raymondr15

Maybe removing the graphs from the list and adding them back? Or disable and enable the graphing? Just guess, haven't tried it.

That won't work.

raymondr15

As I asked earlier, what is the latency to the DNS servers?

raymondr15

Back to the question from mrz that routerOS version are you having?

Sorry, missed the post, I'm using the current latest (6.36.3)

raymondr15

Don't think this is possible...

raymondr15

I wouldn't give guest access to the customer, they are still ways they can get to the other sections and also get the admin password.

raymondr15

Hy, i have a ccr router where all my pppoe clients are, how can i drop them at the same time every day? the only way is the scheduler with a script or there is a setting somewhere in mikrotik to do is? thanks You will have to do it with scheduler and script: /ppp active remove [/ppp active find ser...

raymondr15

This configuration should be fine.

raymondr15

Try using the spectrum scan and frequency usage to find the clearest channel. If you also want roaming capability then set all the radios to the same mode, band, channel width (basically all wireless settings the same) and turn on WDS to dynamic with WDS default bridge none. Also, why don't you use ...

raymondr15

Don't think that is possible.
Packages are installed on the NAND chip on the RouterBoard

raymondr15

I'm sure you can do it via the dude monitoring package.

raymondr15

Use the mikrotik user manager package and setup the radius server.

raymondr15

Try turning accounting backup off?

raymondr15

I'v had the same problem and found no fix... I'v also seen when I access my user manager from a remote location and have a packet loss or even a slow connection it seems to corrupt the user manager so always make sure you have automatic backups. Don't like user manager, wish MikroTik would make some...

raymondr15

Maybe connection is too slow to reach DNS server or timing out...
What is the latency to the DNS servers?

raymondr15

Hi, When testing the RB2011UiAS-RM with LCD turned on I get random ping spikes and CPU runs +- 10% without passing any traffic. Looking at tool>profile I can see SPI and unclassified +-5% each. I know that SPI is for the LCD but a few versions earlier I don't think unclassified was involved, when t...

raymondr15

Hi, When testing the RB2011UiAS-RM with LCD turned on I get random ping spikes and CPU runs +- 10% without passing any traffic. Looking at tool>profile I can see SPI and unclassified +-5% each. I know that SPI is for the LCD but a few versions earlier I don't think unclassified was involved, when tu...

raymondr15

yhe frst PC could not connect using webinstall the famou 1003 error. another pc with win7 finally connected after disabling all the safety features. upin reset the MAC adress appeared in the window. I hit install using the routeros-mipsbe package (fter assigning the mac adresses etc, and calling th...

raymondr15

I have a similar case: brand new device, had trouble resetting to factory; finally managed to enter the groove via winbox onm facxt default settings. upgraded to latest version. cannot access it anymore, not after 30 sec reset upon powering up , winbox cannot find the device anymore, nothing at 192...

raymondr15

Looks like it's damaged.

Have you opened and inspected it?

Yeah, I have opened it and everything looks perfect inside, just doesn't boot.

raymondr15

Hi, I have a Groove 52HPn, when plugging the unit in, the first two wireless LED's light up and nothing happens, no beep or anything, even tried to get the unit into netinstall and also held the reset button down for more than 300 seconds as I know this emergency formats the device but nothing happe...

raymondr15

dear all. I have linux ubuntu pc..and isntalled squid server on it..bt i can't use it with mikrotik..it works fine by manually setting on browser's proxy setting.. My squid server ip is 192.121.122.3 Squid port is 3128 Getway is 192.121.122.1 So how to configure squid as mikrotik parent cache serve...

raymondr15

dear all. I have linux ubuntu pc..and isntalled squid server on it..bt i can't use it with mikrotik..it works fine by manually setting on browser's proxy setting.. My squid server ip is 192.121.122.3 Squid port is 3128 Getway is 192.121.122.1 So how to configure squid as mikrotik parent cache serve...

raymondr15

My pleasure

raymondr15

Im not too sure on that one because you are doing double nat I used to have the same setup as you and my first router was doing the PCC mangling, if you have the detect and blocking rules on Mikrotik2 then if you get an attack its going to block your access from getting into Mikrotik1 from your Mikr...

raymondr15

Is this what you looking for? In http://routerip:port/userman for each user that you want to reset-counters for you must add a comment into the users profile under the "Private information" tab eg. nontrial So if you have a comment that says "nontrial" then you need to change the...

raymondr15

Is this what you looking for?

Change the script to your network addresses

:for x from 2 to 254 do={
/queue simple add name="User-$x" dst-address=192.168.1.0/24 max-limit=100M/100M target-addresses="192.168.1.$x"}

raymondr15

Can anyone help me please.. I need to create a script that will check each user in /tool user-manager user for their total usage and then if they have gone over the specified amount that I put in the script then the script must create a queue that limits their speed to 50% or a specific number for ...

Search found 119 matches