MikroTik

ka4opi4a

Yesterday updated my home hAP AC from 6.49.2 to 7.1.1. Now I get very low wifi speeds over both wifi networks. Anyone else with the same issue ? Try to turn off your hap by the option in system, mine when I turn off in version 7 it turns on again. Just try this - the device turns off and stay off, ...

ka4opi4a

Yesterday updated my home hAP AC from 6.49.2 to 7.1.1. Now I get very low wifi speeds over both wifi networks. Anyone else with the same issue ?

ka4opi4a

When we are going to see the mUPS device ? Also some detailed info about it ?

ka4opi4a

Nope. It's not working. The DHCP is lited red when set it to work on bridge1. In bridge1 are eth1 (dumb switch), wlan1 and wlan2. If there is no DHCP working and I set IP manually on PC it's working fine. Where is my mistake ? EDIT: OK, just make it working. I was forget network prefix in DHCP serve...

ka4opi4a

Yes, non-managed switch. The Google auto correct space technology.... In DHCP server do I need to set gateway, netmask, etc... I'll try it tomorrow.

ka4opi4a

Hello. I'm trying to setup the above MT after a dump switch to use it only wirelessly. The problem is that there is no running DHCP on the dump switch. I want when connect to MT wirelessly to receive IP address from the same subnet like the dump switch. Is it possible ? NAT is not an option.

ka4opi4a

Try to add interface and then disable it.

ka4opi4a

I think you can disable all but power led.
Go to: System/LEDs

ka4opi4a

Hello, Please help me. I have rb952ui-5ac2nD. A would like test routeros downgrade. But router is brick. Download mipsbe5.26, and click downgrade. Router reboot, and not respond. Situation: When not responded 30 minutes I reboot. Until reboot power and usr blink no other (1-2-3-4-5 if lan cable...

ka4opi4a

The serial number of mine HAP AC is: 673705... I have 200 Mbit/s speed over fiber optic. The device reach the speed in WAN-LAN and WAN-WLAN LAN-WLAN wsing 80mhz I reach around 350-400 Mbit/s. Using 6.35 ROS, 3.31 firmware and woreless-rep My device is configured like AP - it's not running nat, firew...

ka4opi4a

Downclock the CPU to 600 MHZ and disable the chains in the wlan interfaces that you are not using (if there is).
Also try using 5180 Ceee.

ka4opi4a

How can I check this ?
*) pppoe-client - implemented fastpath support;

ka4opi4a

Can I use latest current release and latest rc wireless rep package ?

ka4opi4a

Any news about fixing AC mode and Intel 7260 ?

ka4opi4a

The new rc48 bring back the problem. I try everything to fix it, but had no luck. Now I'm stuck again in 30 Mbit/s using intel 7260ac.

ka4opi4a

Just manage to net install it somehow... And install 6.35rc48. It's working normall, but the wifi speed on the 5 ghz using intel 7260ac is just like on the current channel. With the previous rc the speed was really good ~ 400 mbps.

ka4opi4a

Just broke my HAP AC after upgrade from previous rc version. I don't have much time, but I have no luck with net install. Also not discoverable over winbox. Please help...

ka4opi4a

I can't connect to hap ac running 6.35rc19. On connection attemp the app stop working.

ka4opi4a

That's a good news. The coverage of hAP AC is really good. Compared to Linksys E3200, hAP AC is way batter.

ka4opi4a

Probably I will. Just have some of thease in my desk. By the way my hAP AC holding temps around 55 degree without doing anything

ka4opi4a

Today i receve my hAP AC. I have cooper sfp module 10/100/1000 like this one http://www.kst-bg.com/shop/hi-tech-man/ ... 0_100_1000 and it's not working. I try to force ethernet of the sfp to 100 and 1000 but it's not working. I guess it's a compatibility issue. Anyone using a cooper sfp ?

ka4opi4a

What exactly do you mean ? This is normal dual band wifi AC router.

ka4opi4a

I think you can always extend the memory with usb port. Correct ?

ka4opi4a

Finally !!!

ka4opi4a

Is the HAP AC (non lite) available in the US yet?
Nope, it will be available from MT in 3 weeks (+ one week for shipment from Lativa to USA).

Where did you find that info ? I ask the dealers here in Bulgaria and nobody knows anything about HAP AC....

ka4opi4a

Where did you found it ? And what is the price without vat ?

ka4opi4a

Little bit high price if it's real. This is the same price of RB2011 with wifi.

ka4opi4a

I think somewhere between 80 and 100 us dollars. This is only suggestion.

ka4opi4a

Sorry, I didn't know that. Let's hope we all can touch it in february.

ka4opi4a

Still nothing on routerboard.com....

ka4opi4a

I'm wondering why there is no official answer from MT support... I sell my home hardware and waiting for HAP AC for few monts. Please, MT say something

ka4opi4a

Hi guys. I have RB 433GL in AP mode and one RB800 in station bridge mode connected to it. I can ping RB433GL, but can't access it over http, winbox, ssh or telnet. No firewall rules. In the same time can access the RB800 over http, winbox and telnet. Both devices are running 6.31 ROS and v3.24 firmw...

Search found 32 matches

Re: v7.1.1 is released!

Re: v7.1.1 is released!

Re: MUM Europe 2017: new hardware incoming!

Re: hAP AC lite as wi-fi switch with dhcp

Re: hAP AC lite as wi-fi switch with dhcp

hAP AC lite as wi-fi switch with dhcp

Re: HAP AC

Re: HAP AC

Re: HAP AC

Re: HAP AC faulty seriers - very poor LAN performance? (switch problem)

Re: HAP AC

Re: v6.35 [current] is released!

Re: v6.35rc [release candidate] is released, new wireless package!

Re: v6.35rc [release candidate] is released, new wireless package!

Re: hAP ac 802.11ac mode compatibility issue

Re: v6.35rc [release candidate] is released, new wireless package!

Re: v6.35rc [release candidate] is released, new wireless package!

Re: Tik App, MikroTik android utility ALPHA test

Re: HAP AC

Re: HAP AC

Re: HAP AC

Re: HAP AC

Re: HAP AC

Re: HAP AC

Re: HAP AC

Re: HAP AC

Re: HAP AC

Re: HAP AC

Re: HAP AC

Re: HAP AC

Re: HAP AC

RB433GL respond to ping, but can't login