i have 2 interface with diffrent ips ...but gateway is same....when i add default route...traffic passing immediately on both interface....but i want single interface use for defalt..in older version we use %interfce.....how is possible in this version

thanks alotttt....

/ip route add check-gateway=ping distance=1 gateway="EXTRA PPPOE" routing-mark=G-2 add check-gateway=ping distance=1 gateway=192.168.100.1 routing-mark=G-SQ add check-gateway=ping distance=1 gateway=103.225.xx.xx routing-mark=CIR add check-gateway=ping distance=1 gateway=103.225.xx.xx add ...

sir...for example in mangle i routing marked a traffic with the name "Line1"..... and my gateway is 192.168.1.1 ..... nw tel me which rules will b add in /ip route sectiin and /ip route rule section...then i will totaly understand about it

sorry i didnot understad that rule...why 8.8.8.8 dst adress use in route and 1.1.1.1 in route rule...

sorry i didnot understad that rule...why 8.8.8.8 dst adress use in route and 1.1.1.1 in route rule...

i make some routes tabel and making routing mark rule in mangle.....my question how i can use this route marking in /ip route ....i want to pass this marking traffic through specific gateway..

iam also facing same issue ...on gigabit interfaces ...port go link down and linkup contiously after some hours or days..when i reboot then it again woking good for some hours,,you got any solution for it?

IN TORCH... not show any trafic on pppoe client interface..

Post your ip>routes rules here

vikibhai, please contact support@mikrotik.com about your TX/RX chain0/chain1 signal reading problem. The problem of the signal not reading started with v6.37rc22? Also please note that chain0 RX should always be enabled as chain0 is considered the main chain. I already mail to support mikrotik...an...

1)have 2 basebox2 with 6.37 rc22 2)i downgradge my basebox2 to 5.26....... both basebox downgrde successfulyy.but one of them having a licence issue...on every reboot..device changing the software id.....now i upgrade it to back 6.37rc22..got lisence back..why it happend one of my basebox2 device on...

http://imgur.com/a/bJptd Just a silly question It not to check TX and RX on both chain? Enviado de meu XT1580 usando Tapatalk what silly i have click on tx chain 1 and u see on my image there my registered client not having a chain1 sgnal...zoom it see clearly No On your 1 print You check chain 0 T...

http://imgur.com/a/bJptd

Just a silly question
It not to check TX and RX on both chain?


Enviado de meu XT1580 usando Tapatalk

what silly i have click on tx chain 1 and u see on my image there my registered client not having a chain1 sgnal...zoom it see clearly

i have 2 basebox and both have latest packages 6.37 rc22.....problem with TX RX CHAIN...i test multipal combination chains.....
chain 1 not working..check its if its have a firmware bug

i have 2 basebox and both have latest packages 6.37 rc22.....problem with TX RX CHAIN...i test multipal combination chain.....chain 1 not working..plz sout out this problem...

i have 2 unit basebox 2....with diffrent antenas...i have speed issue mostly through that devices..today i chacked deeply when i change tx rx chain ..like tx 0 1 and rx 0 1 i have lowe speed through this device...when i select tx chain 1 and rx chain 0 1 i have no issue in speed.....and there is sta...

sir i have tou router ik 750 gl (load ballencer and 450g (with hotspot) i user facebook ip catch script it work fine on 450g(hotspot)but in loadbballnecer its not work goog its capture all ips in adress listlink
print screen windows xp