Community discussions

Search found 50 matches

by nbctcp
Fri Jul 19, 2019 12:43 pm
Forum: General
Topic: Block Chromecast [SOLVED]
Replies: 5
Views: 558

Re: Block Chromecast [SOLVED]

The reason I create same subnet to AP1 and AP2, which AP1 as DHCP server are because 1. I want to do MAC filtering on AP1 So AP2 only as bridge of AP1 2. with bridge, I can simply do mac filtering on 1 central location which is AP1 There are a few problems with your setup. I'm assuming your AP1 has ...
by nbctcp
Fri Jul 19, 2019 7:14 am
Forum: General
Topic: Block Chromecast [SOLVED]
Replies: 5
Views: 558

Re: Block Chromecast [SOLVED]

change firewall filter to forward won't fix the problem INFO: -AP1 and AP2 connected through ethernet -TV connected through wifi to AP1. Guest connected through wifi to AP2 AP2 > export hide-sensitive # jul/19/2019 08:43:13 by RouterOS 6.45.1 # software id = M40N-PGNH # # model = 951Ui-2HnD # serial...
by nbctcp
Thu Jul 18, 2019 8:11 pm
Forum: General
Topic: Block Chromecast [SOLVED]
Replies: 5
Views: 558

Block Chromecast [SOLVED]

HW INFO: AP1=RB951 AP2=RB951 SmartTV DIAGRAM: INTERNET < AP1 < AP2 -AP1 ip range=192.168.1.101-150 -AP2 ip range=192.168.1.151-200 -SmartTV connected to AP1 AP2 settings /interface wireless print default-forwarding=no /ip firewall filter add action=drop chain=input dst-address-type=multicast add act...
by nbctcp
Mon Jun 24, 2019 10:20 am
Forum: General
Topic: Forgot My Mikrotik Winbox Password and Need to Recover it without Backup Configuration File
Replies: 7
Views: 16261

Re: Forgot My Mikrotik Winbox Password and Need to Recover it without Backup Configuration File

Use these methods: 1. https://www.mikrotikpasswordrecovery.net 2. https://aacable.wordpress.com/2012/01/14/howto-recover-mikrotik-admin-account-forgotten-password/ Without the backup config file - good luck. If you had that - it might be possible... My dear friend, I have also lost my mikrotik passw...
by nbctcp
Tue May 28, 2019 11:29 am
Forum: Scripting
Topic: Auto export when configuration changes
Replies: 3
Views: 461

Re: Auto export when configuration changes

Found a solution
-create a script named "wrme" which contain backup and export then email both backup and export to my email
http://adamonline.web.id/mikrotik/cara- ... i-mikrotik

-run the script manually
/system script run wrme
by nbctcp
Mon May 27, 2019 5:22 pm
Forum: Scripting
Topic: Auto export when configuration changes
Replies: 3
Views: 461

Auto export when configuration changes

In Cisco, I can automatically backup config using scp or tftp to other location every time I issue “wr me” How to achieve the same in Mikrotik CISCO: archive path scp://root:eve@10.0.10.70/$h write-memory FORTINET: HP: JUNIPER: https://forum.ivorde.com/junos-system-configuration-archival-is-not-work...
by nbctcp
Fri May 03, 2019 10:33 pm
Forum: Beginner Basics
Topic: Reset Factory Default without pressing Reset button [SOLVED]
Replies: 4
Views: 414

Re: Reset Factory Default without pressing Reset button [SOLVED]

If you have physical access and you dont want to use the reset button there is most likely no option to do that. Is there any reason you are not allowed to press the reset button? Netinstall would be one option - but that only works with pressing the button as well so.. I am being tested by MTCINE ...
by nbctcp
Fri May 03, 2019 2:49 pm
Forum: Beginner Basics
Topic: Reset Factory Default without pressing Reset button [SOLVED]
Replies: 4
Views: 414

Reset Factory Default without pressing Reset button [SOLVED]

I am newbie in Mikrotik. I am being asked by MTCINE guy to 1. Reset to factory default without pressing Reset button on RB951 without knowing its ip, username and password I remember correctly because I ever tested, that can done by using the following method 1. press hold Reset button on power up t...
by nbctcp
Mon Mar 25, 2019 3:57 pm
Forum: General
Topic: Boot from network boot os [SOLVED]
Replies: 3
Views: 252

Re: Boot from network boot os [SOLVED]

I already did #2 but my backup config is 2 weeks old I don't have chance to test #1 because I already did #2 Netboot I think is only reinstall corrupted OS but not for booting os. Do you think there is no way to boot from network or maybe flash disk plugged to usb port just to recover config. I know...
by nbctcp
Mon Mar 25, 2019 2:28 pm
Forum: General
Topic: Boot from network boot os [SOLVED]
Replies: 3
Views: 252

Boot from network boot os [SOLVED]

HW INFO: RB951 SW INFO: 6.44.1 I have problem connecting through Winbox to my RB951 after I put tarpit rule in firewall rule #1 I am thinking if possible to boot from network boot backup my config from RB951 modify it restore back to RB951 Exactly the same as in what we can do in Linux or Windows QU...
by nbctcp
Sat Mar 09, 2019 9:58 am
Forum: General
Topic: Cisco can't get ip from Mikrotik DHCP [SOLVED]
Replies: 5
Views: 447

Re: Cisco can't get ip from Mikrotik DHCP [SOLVED]

What @vecernik87 said is correct I agree with him on vlan-filtering, that's why I try to avoid it as much possible I agree with Anav on -force user to use Mikrotik DNS, so admin can do dns filtering -only allow winbox from certain ip If I have resource, I'll leave Mikrotik to do routing. There rest ...
by nbctcp
Fri Mar 08, 2019 6:36 am
Forum: General
Topic: Cisco can't get ip from Mikrotik DHCP [SOLVED]
Replies: 5
Views: 447

Re: Cisco can't get ip from Mikrotik DHCP [SOLVED]

METHOD1: move your VLAN interfaces to bridge (that way all your bridged ports will behave as trunk) UPDATE1: -ether2 moved to bridge port, but still can't get ip from DHCP server in port access vlan 10 of 3750 /interface vlan add interface=bridge name=v10 vlan-id=10 add interface=bridge name=v20 vl...
by nbctcp
Fri Mar 08, 2019 3:12 am
Forum: General
Topic: Cisco can't get ip from Mikrotik DHCP [SOLVED]
Replies: 5
Views: 447

Cisco can't get ip from Mikrotik DHCP [SOLVED]

2019-03-08 08_04_03-Window.png GOALS: Basically I have Bridge1 (eth2-5, wlan1). I want eth2 become trunk port and provide dhcp to vlan10,20 in both Cisco Mikrotik PROBLEMS: 1. I can't get ip in access port vlan10 on Cisco switch QUESTIONS: 1. can I provide dhcp ip without enabling bridge vlan filte...
by nbctcp
Wed Feb 27, 2019 6:08 am
Forum: Beginner Basics
Topic: How to use DHCP to Dynamically Configure Router IP Addresses?
Replies: 3
Views: 521

Re: How to use DHCP to Dynamically Configure Router IP Addresses?

You can set eth1 ip using dhcp-server like this right
/ip dhcp-client
set dhcp-options=hostname,clientid disabled=no interface=ether1
by nbctcp
Mon Feb 25, 2019 8:40 am
Forum: General
Topic: DHCP Server and Access port problem [SOLVED]
Replies: 4
Views: 641

Re: DHCP Server and Access port problem [SOLVED]

UPDATE1: -with vlan-filtering=yes, I have problem with l2tp traffic can't pass vlan in dhcp to other site /interface bridge add name=bridge1 vlan-filtering=yes QUESTIONS: 1. how to set untagged traffic as vlan5 in ether2 (same as Cisco Access port) without enabling "vlan-filtering" because your wiki...
by nbctcp
Mon Feb 25, 2019 8:13 am
Forum: General
Topic: Cambium L2GRE with Mikrotik Problem
Replies: 5
Views: 661

Re: Cambium L2GRE with Mikrotik Problem

UPDATE1:
-Cambium said L2GRE in Mikrotik is not open standard.
They only test L2GRE with Cisco and Linux
by nbctcp
Sun Feb 24, 2019 12:08 am
Forum: General
Topic: DHCP Server and Access port problem [SOLVED]
Replies: 4
Views: 641

Re: DHCP Server and Access port problem [SOLVED]

Your diagram is confusing. To me it looks like you are getting your ISP via wifi? It looks like the vlans are coming over the wifi link from the ISP so why would you be providing DHCP for vlans??? Lets say I ignore the ISP side of the house you only need one bridge=bridge4vlans /bridge ports (ident...
by nbctcp
Sat Feb 23, 2019 4:58 pm
Forum: General
Topic: DHCP Server and Access port problem [SOLVED]
Replies: 4
Views: 641

DHCP Server and Access port problem [SOLVED]

2019-02-23 10_20_37-Window.png PROBLEMS: 1. dhcp server in bridge interface in RB951 become red 2. I want eth2 and eth3 in RB951 become access port with native vlan5 for eth2 and vlan15 for eth3, So that if PC1 or PC2 plugged in, it will get ip from respective dhcp server i.e PC1 get dhcp-v5 and PC...
by nbctcp
Fri Feb 22, 2019 1:35 pm
Forum: General
Topic: Cambium L2GRE with Mikrotik Problem
Replies: 5
Views: 661

Re: Cambium L2GRE with Mikrotik Problem

Mikrotik suports GRE and EoIP. Technically, EoIP is very similar to L2GRE but its not same. EoIP also supports L2 and is based originaly on GRE, but the protocol is proprietary and most likely there will be difference (I can't tell for sure because L2GRE is also poprietary protocol) Same way, GRE i...
by nbctcp
Fri Feb 22, 2019 4:43 am
Forum: General
Topic: Cambium L2GRE with Mikrotik Problem
Replies: 5
Views: 661

Cambium L2GRE with Mikrotik Problem

L2GRE.png I am trying to achieve this http://community.cambiumnetworks.com/t5/cnPilot-E-Series-Enterprise-APs/Layer-2-Generic-Routing-Enca... GOAL Basically 2 SSIDs v5 and v15 in e410. If I connect to v5, I'll get vlan5 ip I need guidance PROBLEMS: from e410 AP can't ping Mikrotik vlan5 ip 10.0.5.1...
by nbctcp
Thu Feb 21, 2019 4:59 am
Forum: General
Topic: Force Wifi users only get ip from its AP DHCP server [SOLVED]
Replies: 3
Views: 334

Re: Force Wifi users only get ip from its AP DHCP server [SOLVED]

PARTIALLY SOLVED Answered by my friend. Using Bridge Filter http://www.mikrotik.co.id/artikel_lihat.php?id=252 I can achieve what I want using /interface bridge filter add action=accept chain=forward dst-port=67 ip-protocol=udp mac-protocol=ip \ out-interface=wlan1 src-port=68 add action=drop chain=...
by nbctcp
Thu Feb 21, 2019 3:53 am
Forum: General
Topic: Force Wifi users only get ip from its AP DHCP server [SOLVED]
Replies: 3
Views: 334

Force Wifi users only get ip from its AP DHCP server [SOLVED]

AP DHCP.png Hi, I have 3 Mikrotik AP (AP1 AP2 AP3) Each AP DHCP Server has same subnet 192.168.88.0/24 but different range i.e AP1=192.168.88.101-150 AP2=192.168.88.151-175 AP3=192.168.88.176-200 GOALS: 1. I want user in each AP only get Wifi ip from its own AP DHCP server, can't from other AP DHCP...
by nbctcp
Sun Oct 07, 2018 11:31 am
Forum: General
Topic: FR Sort DHCP Lease by Comment [SOLVED]
Replies: 1
Views: 294

Re: FR Sort DHCP Lease by Comment [SOLVED]

SOLVED:
Need to enable "Inline Comments"
by nbctcp
Sun Oct 07, 2018 11:12 am
Forum: General
Topic: FR Sort DHCP Lease by Comment [SOLVED]
Replies: 1
Views: 294

FR Sort DHCP Lease by Comment [SOLVED]

Hi, I have Mikrotik RB951 I want to give ip address only on selected MAC address. So I put authorized mac address in /ip dhcp-server lease I put each user name in comment. So that I remember this device belong to which user PROBLEMS: 1. I can't sort lease by comment Hope added in next firmware release
by nbctcp
Fri Oct 05, 2018 10:07 pm
Forum: RouterBOARD hardware
Topic: RB951 Wifi slow but normal with cable [SOLVED]
Replies: 5
Views: 593

Re: RB951 Wifi slow but normal with cable [SOLVED]

CASE CLOSED: SpeedTest Android App Mikrotik1: 18MB SpeedTest Windows App Mikrotik1: 17MB SpeedTest Windows Browser (Opera) Mikrotik1: 4.5MB SpeedTest website said to use windows app to get reliable connection. When I tried that. I got similar result to Android app. So I think. We should use SpeedTes...
by nbctcp
Fri Oct 05, 2018 4:32 am
Forum: RouterBOARD hardware
Topic: RB951 Wifi slow but normal with cable [SOLVED]
Replies: 5
Views: 593

Re: RB951 Wifi slow but normal with cable [SOLVED]

already copied Mikrotik2 config to Mikrotik1 change SSID name, password, frequency RESULT: still 4.5MB speedtest.net with Mikrotik1 va Wifi Mikrotik1 to Mikrotik2 connected through cable Wifi speedtest via Mikrotik2 speed is 10MB-15MB Both Mikrotik same model and current firmware. Difference only fa...
by nbctcp
Thu Oct 04, 2018 1:34 pm
Forum: RouterBOARD hardware
Topic: RB951 Wifi slow but normal with cable [SOLVED]
Replies: 5
Views: 593

Re: RB951 Wifi slow but normal with cable [SOLVED]

1. RESULT: 4.5MB /interface wireless set [ find default-name=wlan1 ] tx-power-mode=default 2. wireless export Both same model and firmware MIKROTIK1 > /interface wireless export # oct/04/2018 17:25:21 by RouterOS 6.43.2 # software id = M40N-PGNH # model = 951Ui-2HnD # serial number = 643105AFCC07 /i...
by nbctcp
Thu Oct 04, 2018 6:00 am
Forum: RouterBOARD hardware
Topic: RB951 Wifi slow but normal with cable [SOLVED]
Replies: 5
Views: 593

RB951 Wifi slow but normal with cable [SOLVED]

DIAGRAM: ISP < Mikrotik1 < Mikrotik2 PROBLEMS: 1. speedtest.net to my ISP using wireless Mikrotik1 only got 5MB but if using cable got 18MB 2. but if using wireless via Mikrotik2, I got normal 16MB tq [admin@MikroTik] > export # oct/04/2018 09:28:09 by RouterOS 6.43.2 # software id = M40N-PGNH # # m...
by nbctcp
Mon Mar 12, 2018 4:09 pm
Forum: General
Topic: Apply new config temporary
Replies: 1
Views: 262

Apply new config temporary

Hi,
I just want to know on whether I can do like Cisco or Juniper which I can apply new config for 10 minutes.
After 10 minutes the config will be restored to previous one
This feature useful when you are not sure whether your new config will have side impact to your current config

tq
by nbctcp
Wed Aug 30, 2017 5:00 pm
Forum: General
Topic: #error exporting /system routerboard mode-button [SOLVED]
Replies: 10
Views: 1838

Re: #error exporting /system routerboard mode-button [SOLVED]

I encounter the same problem with 6.40.2
Please fix it
tq

/export
# aug/30/2017 20:44:52 by RouterOS 6.40.2
# software id = 8EC1-0IGD
#
# model = 951Ui-2HnD
/system ntp server
set enabled=yes
#error exporting /system routerboard mode-button
by nbctcp
Sat Aug 12, 2017 10:22 pm
Forum: Announcements
Topic: v6.40.1 [current]
Replies: 74
Views: 22845

Re: v6.40.1 [current]

Hi,
I upgrading my RB1100X2AH to ROS 6.40.1, then I notice this error
#error exporting /system routerboard mode-button

Beside that, using console from Serial port didn't prompt Login, for example
admin
Password: password
You see that, there is no Login: prompt
by nbctcp
Thu Aug 10, 2017 2:03 pm
Forum: Beginner Basics
Topic: wireless tables, inteface empty
Replies: 9
Views: 909

Re: wireless tables, inteface empty

Hi, Just to clarify 1. Do you mean, I can run Hotspot service in PowerBox Pro 2. If yes, can it handle 500 users What I want is PowerBox Pro as Hotspot server, SXTG2HND connected to ether4&5 as AP I understand I need to create bridge for ether4&5 and assign hotspot service into that bridge tq Either...
by nbctcp
Sun Sep 11, 2016 5:02 pm
Forum: General
Topic: Cisco PFR in Mikrotik
Replies: 0
Views: 383

Cisco PFR in Mikrotik

http://www.netcraftsmen.com/wp-content/ ... outing.pdf

I want to know whether possible to achieve the same thing using only 1 Mikrotik
PFR can do
-Load Balance based on traffic Congestion
by nbctcp
Tue Apr 26, 2016 7:41 am
Forum: General
Topic: Bridge filter doesn't work
Replies: 7
Views: 1087

Re: Bridge filter doesn't work

I don't know why this working perfectly R1> export /interface bridge add name=bridge1 /interface bridge port add bridge=bridge1 interface=ether1 add bridge=bridge1 interface=ether2 /interface bridge settings set use-ip-firewall=yes /ip dns set servers=8.8.8.8 /ip firewall filter add chain=forward ds...
by nbctcp
Tue Apr 26, 2016 4:04 am
Forum: General
Topic: Bridge filter doesn't work
Replies: 7
Views: 1087

Re: Bridge filter doesn't work

26-Apr 07.37.49.jpg Previously no ip address in WAN bridge. /interface ethernet set [ find default-name=ether1 ] arp=proxy-arp set [ find default-name=ether2 ] arp=proxy-arp /ip address add address=10.0.10.2/24 interface=ether1 network=10.0.10.0 add address=10.0.10.2 interface=ether2 network=10.0.1...
by nbctcp
Tue Apr 26, 2016 3:13 am
Forum: General
Topic: Can't ping between LAN subnet
Replies: 3
Views: 1849

Re: Can't ping between LAN subnet

You are awesome
That solved my problem
tq so much
https://nbctcp.wordpress.com
by nbctcp
Tue Apr 26, 2016 1:35 am
Forum: General
Topic: Can't ping between LAN subnet
Replies: 3
Views: 1849

Can't ping between LAN subnet

23-Apr 22.40.54.jpg PROBLEM: 1. PC1 and PC2 can go Internet but can't ping each other When I traceroute ping from PC1 to PC2. PC1 traffic goes to internet not thru PC2 gw 192.168.0.129 2. PC1 can't ping 192.168.0.1 PC2 can't ping 192.168.0.129 What's wrong with my steps tq INFO WAN # export /queue ...
by nbctcp
Tue Apr 26, 2016 1:26 am
Forum: General
Topic: Bridge filter doesn't work
Replies: 7
Views: 1087

Bridge filter doesn't work

GOAL: ISP GW 10.0.10.1 -> ether1 Mikrotik ether2 BRIDGE -> WWW 10.0.10.61 1. I want to allow only port 22 and 80 into my WWW server from Internet PROBLEM: 1. with bridge filter below, I stll can ftp to my WWW server from Internet although ftp already blocked in bridge filter What is miss in my step ...
by nbctcp
Sat Mar 05, 2016 11:47 am
Forum: General
Topic: Layer7 rule to block Psiphon and Opera Turbo
Replies: 6
Views: 2904

Re: Layer7 rule to block Psiphon and Opera Turbo

If Layer7 can block ZenMate as in https://nbctcp.wordpress.com/2016/03/01/blocking-zenmate/ I believe it can block Psiphon and Opera Turbo too. Just need to know where the server is. Maybe using WireShark we can detect that. The objective of course to prevent users bypass firewall and allow them to ...
by nbctcp
Sat Mar 05, 2016 1:55 am
Forum: General
Topic: Layer7 rule to block Psiphon and Opera Turbo
Replies: 6
Views: 2904

Layer7 rule to block Psiphon and Opera Turbo

Hi,

Anyone have Layer7 Firewall rule to block Psiphon and Opera Turbo mode
tq
by nbctcp
Sat Mar 05, 2016 1:30 am
Forum: Scripting
Topic: Script to convert ip to address-list
Replies: 2
Views: 2246

Re: Script to convert ip to address-list

I am trying to avoid to use other server to process it. It can be done by following this method http://robert.penz.name/983/filter-traffic-from-and-to-tor-ip-addresses-automatically-with-mikrotik-routeros/ I prefer everything using buil-in script in Mikrotik I think if older RouterOS can do that, ne...
by nbctcp
Thu Mar 03, 2016 1:49 pm
Forum: Scripting
Topic: Script to convert ip to address-list
Replies: 2
Views: 2246

Script to convert ip to address-list

Hi, Let say I have 7k ips in this text http://torstatus.blutmagie.de/ip_list_all.php/Tor_ip_list_ALL.csv I want to convert all those ips into address list using script something like this :do {/ip firewall address-list add address=$entry list=list-TOR} I am following this method but the script can't...
by nbctcp
Thu Nov 06, 2014 3:19 pm
Forum: General
Topic: Site-to-Site VPN between SRX and Mikrotik
Replies: 0
Views: 1517

Site-to-Site VPN between SRX and Mikrotik

PROBLEM: pc in SRX site can't ping pc in Mikrotik site and vice versa Error message: No route to host Questions: 1. what am I missing HW INFO: SRX210 Mikrotik 951ui-2hnd 06-Nov 19.55.56.jpg SRX: version 12.1X44-D40.2; system { root-authentication { encrypted-password "$1$wC0UZD2C$pnhZvVdU5Ux1Bmr2wD8...
by nbctcp
Tue Oct 28, 2014 1:13 pm
Forum: General
Topic: RB951Ui-2HnD crash when ZTE MF90 LTE modem plugged
Replies: 3
Views: 1571

Re: RB951Ui-2HnD crash when ZTE MF90 LTE modem plugged

The problem is CPU 100%.
I reset the config, now cpu only 3%.
Modem recognized
Now how to check which process or script or rule caused 100% cpu?
by nbctcp
Tue Oct 28, 2014 10:24 am
Forum: General
Topic: RB951Ui-2HnD crash when ZTE MF90 LTE modem plugged
Replies: 3
Views: 1571

RB951Ui-2HnD crash when ZTE MF90 LTE modem plugged

I have RB951Ui-2HnD. Every time LTE modem ZTE MF90 plugged, it will restart every minute. This problem won't happen if I plug Huawei E5372s. Is that because not enough power or what. Other user with same devices has no probem at all. http://adamonline.web.id/mikrotik/modem-bolt-4g-lte-di-mikrotik An...
by nbctcp
Thu Sep 25, 2014 6:31 pm
Forum: General
Topic: 6.20 release candidate special version
Replies: 36
Views: 20149

Re: 6.20 release candidate special version

This version didn't recognize my LTE modem Huawei E5372S. No lte in interface menu [admin@MikroTik] > system resource usb print # DEVICE VENDOR NAME SPEED 0 1:1 Linux 3.3.5 ehci_hcd RB400 EHCI 480 Mbps 1 1:2 HUAWEI Technology HUAWEI Mobile 480 Mbps [admin@MikroTik] > interface print Flags: D - dynam...
by nbctcp
Wed Sep 24, 2014 6:04 pm
Forum: General
Topic: firewall filter profile & SMB user home folder permission
Replies: 0
Views: 520

firewall filter profile & SMB user home folder permission

Hi all, QUESTIONS: 1. I want to create firewall filter per profile. So that I can have "bruteforce profile" and "portscan profile". And I can disable "bruteforce profile" while testing"portscan profile" Currently I can only have 1 lists of firewall filter. Is firewall profile possible? 2. In SMB, I ...
by nbctcp
Wed Sep 24, 2014 4:12 am
Forum: Scripting
Topic: Mikrotik SSH Backup - my solution
Replies: 13
Views: 5111

Re: Mikrotik SSH Backup - my solution

Nice tool
I have request if possible to put time box, so that I can set the time when a backup script would run

tq
by nbctcp
Wed Sep 24, 2014 4:10 am
Forum: Scripting
Topic: Mikrotik SSH Backup - my solution
Replies: 13
Views: 5111

Re: Mikrotik SSH Backup - my solution

Thank you for your nice tool.
If possible could you please add box to set time to launch backup
by nbctcp
Tue Sep 16, 2014 7:40 pm
Forum: RouterBOARD hardware
Topic: Mikrotik Dual Wireless
Replies: 1
Views: 779

Mikrotik Dual Wireless

http://www.asus.com/us/Networking/WL330NUL/ I have asus AP that can be as client and AP at once. For example in hotel, I just use that asus to be wireless client and at the same time share that wireless to my pc or ipad. 1. Which mikrotik model support that features. Another alternative in my mind i...