MikroTik

nbctcp

INFO: -pnetlab 5.3.32 on VMware Workstation 17 on Win11 -chr 7.8 -aruba cx 10 PROBLEMS: 1. I can't ping from chr to switch cx and vice versa eventhough same subnet see attached picture but I don't have problem ping to vlan ip if using MT-MT or Aruba CX-CX MIKROTIK CHR 7.8 /interface vlan add interfa...

nbctcp

Yep, nothing worked, but only in Azure if i go to AWS theres no Problem. what is ur chr aws setting? I can't make ddns chr working in chr with P1 trial license Are you using valid license? Nothing displayed on public ip AWS security group 1. allow inblound 15252 from 159.0.0.0/8 udp 2. allow inboun...

nbctcp

HW INFO: -RB951 as Radius Server -FreeRadius Radius Server alternative -Cambium AP E410 -Ruckus switch ICX7150 PROBLEMS: 1. when I pointing my AP to FreeRadius its working, but if using Mikrotik User Manager, I can't get ip. From NTRadPing, I saw differences between those two FreeRadius https://past...

nbctcp

HW INFO -Aruba switch 2930f ver WC.16.11.0006 -Ruckus switch ICX7150 ver 8.0.95 -Mikrotik RB951 MIKROTIK SETTINGS > /ip/ssh/print forwarding-enabled: no always-allow-password-login: no strong-crypto: no allow-none-crypto: no host-key-size: 2048 ARUBA SETTINGS # sh ip ssh SSH Enabled : Yes Secure Cop...

nbctcp

/interface wireless security-profiles add authentication-types=wpa2-eap mode=dynamic-keys name=EAP_AP \ supplicant-identity=Mikrotik You need to set EAP Method=passthrough Just now test login to mikrotik AP using RADIUS from jumpcloud What are you trying to use the radius client for? Hotspot, PPP, L...

nbctcp

You said CCR1009 max ipsec tunnel throughput 3.2Gbps with 34 tunnels (full duplex) 1.8Gbps with 16 tunnels (full duplex) ? 1. How about CCR1036 maximum numbers of ipsec tunnels? because it has 8GB RAM compare to just 2GB in CCR1009 1.8Gbps with 16 tunnels (full duplex) 820Mbps with one GRE over IpSe...

nbctcp

2022-05-25 06_26_30-EVE _ Topology - Opera.png INFO: -above labs using latest eve-ng with latest ROS 7.2.3 GOALS: I want pc1 got vlan10 when admin login. vlan20 for pc2 PROBLEMS: when I login on pc1 and pc2 those pc didn't get ip address from dhcp server. what miss on my steps tq admin@PC1] > /inte...

nbctcp

I have no idea on how to run "safe mode" using ansible, because there is no command for that
I don't see ansible could send ctrl-x keystroke on routeros module as well
any better idea to issue safe mode in ansible?

nbctcp

INFO:
RB951 ROS 7.1.3

I encounter that problem just now
STEPS TAKEN:
-reboot = not fixed
-unplug ethernet cable then plug back = not fixed
-move cable to different port = not fixed

SOLUTIONS:
-disable nic in /interface (in my case ether4) then enable back

nbctcp

Hi all, I am having trouble receiving the complete output of a command run from a Python script with paramiko using SSH to connect to the router. When I run 'ip firewall connection print' in the terminal on the router GUI it prints the whole connections table along with all the columns with data ra...

nbctcp

GOAL: convert mikrotik chr raw to docker image STEPS: -download chr raw image # wget https://download.mikrotik.com/routeros/7.2rc3/chr-7.2rc3.img.zip # unzip chr-7.2rc3.img.zip # guestfish-a chr-7.2rc3.img --ro ><fs> run ><fs> list-filesystems /dev/sda1: ext2 /dev/sda2: ext3 ><fs> mount /dev/sda2 / ...

nbctcp

INFO: RB951 as Gateway AP has STAFF SSID (vlan10) and GUEST SSID (vlan30) pfSense voucher in GUEST vlan GOALS: 1. forcing GUEST SSID to use pfSense Captive Portal voucher https://www.youtube.com/watch?v=XDNWBNb1l98 QUESTIONS 1. how to setup Mikrotik gateway to force guest users to input valid passco...

nbctcp

I agree with you regarding using other than Mikrotik for AP I have and ever try most Enterprise class AP out there such as Cisco, Aruba, Ruckus, Cambium, Huawei I agree as well using Mikrotik as AP because of price tag In the beginning I am using Mikrotik, TPLink as AP, but because of weak signal, I...

nbctcp

PROBLEM OS 7.1rc6 1. when I run the script nothing coming to my email. mikrotik log didn't show any mail log Where my mistake? tq STEPS TAKEN 1. test manual email /tool e-mail set address=[:resolve smtp.gmail.com] from=user@gmail.com password ="-user" port=587 user=user@gmail.com tls=start...

nbctcp

1. dns peer in dns server already disabled /ip/dhcp-client> /ip dns/print servers: 192.168.88.250 dynamic-servers: 2. reason I use mikrotik as dns server so that I can use netwatch in case adguard server down it will change dns server forwarder to isp dns So you want both clients and the MT use the ...

nbctcp

MIKROTIK 7.1rc6 192.168.88.1 ADGUARD 192.168.88.250 PC 192.168.88.101 Mikrotik DNS Forwarder is AdGuard /ip dns set allow-remote-requests=yes servers=192.168.88.250 AdGuard doing DoH to Cloudflare PROBLEMS: 1. if my pc dns is AdGuard, I can bypass isp sensor perfectly if my pc dns is mikrotik, it wi...

nbctcp

1. let say my office has fast ISP1, but my home has slow ISP2. I want all my home traffic routed thru office ISP1. is that possible 2. what I understand every devices need to install zerotier client. Since Mikrotik has zerotier app. Is that possible every client behind Mikrotik gateway at home could...

nbctcp

Hello Has anyone experienced following issue: I have set NetXms to poll Mikrotik router via ssh and each time when attempt is made, router generates error "can't agree on KEX algorithms". When i log in manualy via ssh, then no error. Seems like it started with NetXms version 3.5.90. It us...

nbctcp

@cbrown I am not clear on this 1. "You could use authoritative and delay threshold to make the backup answer if the primary doesn't" Do you mean 2xDHCP Server+delay threshold won't work as Active-Active meaning only Active-Standby. if yes that mean I prefer not to use that solution 2. &quo...

nbctcp

I got your point OPTION1 no need script to enable local dhcp if remote dhcp down by using primary/secondary dhcp server I think this what you mean https://www.youtube.com/watch?v=Cpu_76WidAo Need to test again whether same subnet 2x DHCP Server with delay threshold will causing ip conflict or not OP...

nbctcp

Hi, I have 2x DHCP Server in each Mikrotik Let say DHCP1 and DHCP2 DHCP1 will always up and serving full subnet, DHCP2 always down or vice versa GOAL: -I want DHCP2 script will detect if DHCP1 service is down and vice versa If down then bring up DHCP2, disable DHCP1 service someting like"# /etc...

nbctcp

2020-10-09 06_58_04-Window.png HW INFO -RB951 -Cisco Switch 3750 PROBLEMS: 1. cisco vlan ip can't ping internet but can ping any mikrotik vlan ip MIKROTIK: /interface list member add comment=defconf interface=bridge list=LAN add comment=defconf interface=ether1 list=WAN /ip address add address=192....

nbctcp

1. Display per page
When you run export, it will display all config in one go.
Is it possible to display perpage.
In Aruba, I can type page then it will display per page

2. Grep
In Aruba or Cisco, I can filter output
# sh run | i vlan

How to achieve the same in Mikrotik

tq

nbctcp

Does RouterOS have command alias? I'm finding myself typing /log print where topics~"script" a lot so being able to alias it to say (ql) would be lovely. I also want this alias feature. Seems can't find anywhere I have automatic script that will send config to my email. If I can alias &qu...

nbctcp

Long time didn't check this forum tq for informing me the link is dead The script something like this -create a script named "wrme" which contain backup and export then email both backup and export to my email -run the script manually /system script run wrme /system script :local hostname ...

nbctcp

doing this will fix the problem /ip ssh set strong-crypto=no This is not a fix, this is a workaround - the server only supports ciphers which are currently considered weak. What you said is true. 1. either change target ssh server to use stronger cipher or 2. set ssh client to use weaker cipher Unf...

nbctcp

SSH client is not working since the 6.8. or 6.9 version. When can we expect fix of this bug? [admin@xxxxx] > system ssh address=192.168.5.3 user=root Welcome back! I encounter the same problem with RB951 6.47 but no problem with ssh client from Basebox2 6.47 (I can see login prompt) Both mikrotik c...

nbctcp

The reason I create same subnet to AP1 and AP2, which AP1 as DHCP server are because 1. I want to do MAC filtering on AP1 So AP2 only as bridge of AP1 2. with bridge, I can simply do mac filtering on 1 central location which is AP1 There are a few problems with your setup. I'm assuming your AP1 has ...

nbctcp

change firewall filter to forward won't fix the problem INFO: -AP1 and AP2 connected through ethernet -TV connected through wifi to AP1. Guest connected through wifi to AP2 AP2 > export hide-sensitive # jul/19/2019 08:43:13 by RouterOS 6.45.1 # software id = M40N-PGNH # # model = 951Ui-2HnD # serial...

nbctcp

HW INFO: AP1=RB951 AP2=RB951 SmartTV DIAGRAM: INTERNET < AP1 < AP2 -AP1 ip range=192.168.1.101-150 -AP2 ip range=192.168.1.151-200 -SmartTV connected to AP1 AP2 settings /interface wireless print default-forwarding=no /ip firewall filter add action=drop chain=input dst-address-type=multicast add act...

nbctcp

Use these methods: 1. https://www.mikrotikpasswordrecovery.net 2. https://aacable.wordpress.com/2012/01/14/howto-recover-mikrotik-admin-account-forgotten-password/ Without the backup config file - good luck. If you had that - it might be possible... My dear friend, I have also lost my mikrotik passw...

nbctcp

Found a solution
-create a script named "wrme" which contain backup and export then email both backup and export to my email
http://adamonline.web.id/mikrotik/cara- ... i-mikrotik

-run the script manually
/system script run wrme

nbctcp

In Cisco, I can automatically backup config using scp or tftp to other location every time I issue “wr me” How to achieve the same in Mikrotik CISCO: archive path scp://root:eve@10.0.10.70/$h write-memory FORTINET: HP: JUNIPER: https://forum.ivorde.com/junos-system-configuration-archival-is-not-work...

nbctcp

If you have physical access and you dont want to use the reset button there is most likely no option to do that. Is there any reason you are not allowed to press the reset button? Netinstall would be one option - but that only works with pressing the button as well so.. I am being tested by MTCINE ...

nbctcp

I am newbie in Mikrotik. I am being asked by MTCINE guy to 1. Reset to factory default without pressing Reset button on RB951 without knowing its ip, username and password I remember correctly because I ever tested, that can done by using the following method 1. press hold Reset button on power up t...

nbctcp

I already did #2 but my backup config is 2 weeks old I don't have chance to test #1 because I already did #2 Netboot I think is only reinstall corrupted OS but not for booting os. Do you think there is no way to boot from network or maybe flash disk plugged to usb port just to recover config. I know...

nbctcp

HW INFO: RB951 SW INFO: 6.44.1 I have problem connecting through Winbox to my RB951 after I put tarpit rule in firewall rule #1 I am thinking if possible to boot from network boot backup my config from RB951 modify it restore back to RB951 Exactly the same as in what we can do in Linux or Windows QU...

nbctcp

What @vecernik87 said is correct I agree with him on vlan-filtering, that's why I try to avoid it as much possible I agree with Anav on -force user to use Mikrotik DNS, so admin can do dns filtering -only allow winbox from certain ip If I have resource, I'll leave Mikrotik to do routing. There rest ...

nbctcp

METHOD1: move your VLAN interfaces to bridge (that way all your bridged ports will behave as trunk) UPDATE1: -ether2 moved to bridge port, but still can't get ip from DHCP server in port access vlan 10 of 3750 /interface vlan add interface=bridge name=v10 vlan-id=10 add interface=bridge name=v20 vl...

nbctcp

2019-03-08 08_04_03-Window.png GOALS: Basically I have Bridge1 (eth2-5, wlan1). I want eth2 become trunk port and provide dhcp to vlan10,20 in both Cisco Mikrotik PROBLEMS: 1. I can't get ip in access port vlan10 on Cisco switch QUESTIONS: 1. can I provide dhcp ip without enabling bridge vlan filte...

nbctcp

You can set eth1 ip using dhcp-server like this right
/ip dhcp-client
set dhcp-options=hostname,clientid disabled=no interface=ether1

nbctcp

UPDATE1: -with vlan-filtering=yes, I have problem with l2tp traffic can't pass vlan in dhcp to other site /interface bridge add name=bridge1 vlan-filtering=yes QUESTIONS: 1. how to set untagged traffic as vlan5 in ether2 (same as Cisco Access port) without enabling "vlan-filtering" because...

nbctcp

UPDATE1:
-Cambium said L2GRE in Mikrotik is not open standard.
They only test L2GRE with Cisco and Linux

nbctcp

Your diagram is confusing. To me it looks like you are getting your ISP via wifi? It looks like the vlans are coming over the wifi link from the ISP so why would you be providing DHCP for vlans??? Lets say I ignore the ISP side of the house you only need one bridge=bridge4vlans /bridge ports (ident...

nbctcp

2019-02-23 10_20_37-Window.png PROBLEMS: 1. dhcp server in bridge interface in RB951 become red 2. I want eth2 and eth3 in RB951 become access port with native vlan5 for eth2 and vlan15 for eth3, So that if PC1 or PC2 plugged in, it will get ip from respective dhcp server i.e PC1 get dhcp-v5 and PC...

nbctcp

Mikrotik suports GRE and EoIP. Technically, EoIP is very similar to L2GRE but its not same. EoIP also supports L2 and is based originaly on GRE, but the protocol is proprietary and most likely there will be difference (I can't tell for sure because L2GRE is also poprietary protocol) Same way, GRE i...

nbctcp

L2GRE.png I am trying to achieve this http://community.cambiumnetworks.com/t5/cnPilot-E-Series-Enterprise-APs/Layer-2-Generic-Routing-Enca... GOAL Basically 2 SSIDs v5 and v15 in e410. If I connect to v5, I'll get vlan5 ip I need guidance PROBLEMS: from e410 AP can't ping Mikrotik vlan5 ip 10.0.5.1...

nbctcp

PARTIALLY SOLVED Answered by my friend. Using Bridge Filter http://www.mikrotik.co.id/artikel_lihat.php?id=252 I can achieve what I want using /interface bridge filter add action=accept chain=forward dst-port=67 ip-protocol=udp mac-protocol=ip \ out-interface=wlan1 src-port=68 add action=drop chain=...

nbctcp

AP DHCP.png Hi, I have 3 Mikrotik AP (AP1 AP2 AP3) Each AP DHCP Server has same subnet 192.168.88.0/24 but different range i.e AP1=192.168.88.101-150 AP2=192.168.88.151-175 AP3=192.168.88.176-200 GOALS: 1. I want user in each AP only get Wifi ip from its own AP DHCP server, can't from other AP DHCP...

nbctcp

SOLVED:
Need to enable "Inline Comments"

nbctcp

Hi, I have Mikrotik RB951 I want to give ip address only on selected MAC address. So I put authorized mac address in /ip dhcp-server lease I put each user name in comment. So that I remember this device belong to which user PROBLEMS: 1. I can't sort lease by comment Hope added in next firmware release

nbctcp

CASE CLOSED: SpeedTest Android App Mikrotik1: 18MB SpeedTest Windows App Mikrotik1: 17MB SpeedTest Windows Browser (Opera) Mikrotik1: 4.5MB SpeedTest website said to use windows app to get reliable connection. When I tried that. I got similar result to Android app. So I think. We should use SpeedTes...

nbctcp

already copied Mikrotik2 config to Mikrotik1 change SSID name, password, frequency RESULT: still 4.5MB speedtest.net with Mikrotik1 va Wifi Mikrotik1 to Mikrotik2 connected through cable Wifi speedtest via Mikrotik2 speed is 10MB-15MB Both Mikrotik same model and current firmware. Difference only fa...

nbctcp

1. RESULT: 4.5MB /interface wireless set [ find default-name=wlan1 ] tx-power-mode=default 2. wireless export Both same model and firmware MIKROTIK1 > /interface wireless export # oct/04/2018 17:25:21 by RouterOS 6.43.2 # software id = M40N-PGNH # model = 951Ui-2HnD # serial number = 643105AFCC07 /i...

nbctcp

DIAGRAM: ISP < Mikrotik1 < Mikrotik2 PROBLEMS: 1. speedtest.net to my ISP using wireless Mikrotik1 only got 5MB but if using cable got 18MB 2. but if using wireless via Mikrotik2, I got normal 16MB tq [admin@MikroTik] > export # oct/04/2018 09:28:09 by RouterOS 6.43.2 # software id = M40N-PGNH # # m...

nbctcp

Hi,
I just want to know on whether I can do like Cisco or Juniper which I can apply new config for 10 minutes.
After 10 minutes the config will be restored to previous one
This feature useful when you are not sure whether your new config will have side impact to your current config

tq

nbctcp

I encounter the same problem with 6.40.2
Please fix it
tq

/export
# aug/30/2017 20:44:52 by RouterOS 6.40.2
# software id = 8EC1-0IGD
#
# model = 951Ui-2HnD
/system ntp server
set enabled=yes
#error exporting /system routerboard mode-button

nbctcp

Hi,
I upgrading my RB1100X2AH to ROS 6.40.1, then I notice this error
#error exporting /system routerboard mode-button

Beside that, using console from Serial port didn't prompt Login, for example
admin
Password: password
You see that, there is no Login: prompt

nbctcp

Hi, Just to clarify 1. Do you mean, I can run Hotspot service in PowerBox Pro 2. If yes, can it handle 500 users What I want is PowerBox Pro as Hotspot server, SXTG2HND connected to ether4&5 as AP I understand I need to create bridge for ether4&5 and assign hotspot service into that bridge t...

nbctcp

http://www.netcraftsmen.com/wp-content/ ... outing.pdf

I want to know whether possible to achieve the same thing using only 1 Mikrotik
PFR can do
-Load Balance based on traffic Congestion

nbctcp

I don't know why this working perfectly R1> export /interface bridge add name=bridge1 /interface bridge port add bridge=bridge1 interface=ether1 add bridge=bridge1 interface=ether2 /interface bridge settings set use-ip-firewall=yes /ip dns set servers=8.8.8.8 /ip firewall filter add chain=forward ds...

nbctcp

26-Apr 07.37.49.jpg Previously no ip address in WAN bridge. /interface ethernet set [ find default-name=ether1 ] arp=proxy-arp set [ find default-name=ether2 ] arp=proxy-arp /ip address add address=10.0.10.2/24 interface=ether1 network=10.0.10.0 add address=10.0.10.2 interface=ether2 network=10.0.1...

nbctcp

You are awesome
That solved my problem
tq so much
https://nbctcp.wordpress.com

nbctcp

23-Apr 22.40.54.jpg PROBLEM: 1. PC1 and PC2 can go Internet but can't ping each other When I traceroute ping from PC1 to PC2. PC1 traffic goes to internet not thru PC2 gw 192.168.0.129 2. PC1 can't ping 192.168.0.1 PC2 can't ping 192.168.0.129 What's wrong with my steps tq INFO WAN # export /queue ...

nbctcp

GOAL: ISP GW 10.0.10.1 -> ether1 Mikrotik ether2 BRIDGE -> WWW 10.0.10.61 1. I want to allow only port 22 and 80 into my WWW server from Internet PROBLEM: 1. with bridge filter below, I stll can ftp to my WWW server from Internet although ftp already blocked in bridge filter What is miss in my step ...

nbctcp

If Layer7 can block ZenMate as in https://nbctcp.wordpress.com/2016/03/01/blocking-zenmate/ I believe it can block Psiphon and Opera Turbo too. Just need to know where the server is. Maybe using WireShark we can detect that. The objective of course to prevent users bypass firewall and allow them to ...

nbctcp

Hi,

Anyone have Layer7 Firewall rule to block Psiphon and Opera Turbo mode
tq

nbctcp

I am trying to avoid to use other server to process it. It can be done by following this method http://robert.penz.name/983/filter-traffic-from-and-to-tor-ip-addresses-automatically-with-mikrotik-routeros/ I prefer everything using buil-in script in Mikrotik I think if older RouterOS can do that, ne...

nbctcp

Hi, Let say I have 7k ips in this text http://torstatus.blutmagie.de/ip_list_all.php/Tor_ip_list_ALL.csv I want to convert all those ips into address list using script something like this :do {/ip firewall address-list add address=$entry list=list-TOR} I am following this method but the script can't...

nbctcp

PROBLEM: pc in SRX site can't ping pc in Mikrotik site and vice versa Error message: No route to host Questions: 1. what am I missing HW INFO: SRX210 Mikrotik 951ui-2hnd 06-Nov 19.55.56.jpg SRX: version 12.1X44-D40.2; system { root-authentication { encrypted-password "$1$wC0UZD2C$pnhZvVdU5Ux1Bm...

nbctcp

The problem is CPU 100%.
I reset the config, now cpu only 3%.
Modem recognized
Now how to check which process or script or rule caused 100% cpu?

nbctcp

I have RB951Ui-2HnD. Every time LTE modem ZTE MF90 plugged, it will restart every minute. This problem won't happen if I plug Huawei E5372s. Is that because not enough power or what. Other user with same devices has no probem at all. http://adamonline.web.id/mikrotik/modem-bolt-4g-lte-di-mikrotik An...

nbctcp

This version didn't recognize my LTE modem Huawei E5372S. No lte in interface menu [admin@MikroTik] > system resource usb print # DEVICE VENDOR NAME SPEED 0 1:1 Linux 3.3.5 ehci_hcd RB400 EHCI 480 Mbps 1 1:2 HUAWEI Technology HUAWEI Mobile 480 Mbps [admin@MikroTik] > interface print Flags: D - dynam...

nbctcp

Hi all, QUESTIONS: 1. I want to create firewall filter per profile. So that I can have "bruteforce profile" and "portscan profile". And I can disable "bruteforce profile" while testing"portscan profile" Currently I can only have 1 lists of firewall filter. Is ...

nbctcp

Nice tool
I have request if possible to put time box, so that I can set the time when a backup script would run

tq

nbctcp

Thank you for your nice tool.
If possible could you please add box to set time to launch backup

nbctcp

http://www.asus.com/us/Networking/WL330NUL/ I have asus AP that can be as client and AP at once. For example in hotel, I just use that asus to be wireless client and at the same time share that wireless to my pc or ipad. 1. Which mikrotik model support that features. Another alternative in my mind i...

Search found 77 matches