MikroTik

Zwodka

Well, well, after a few years, became ModBus support in RouterOS

Zwodka

+1 with mask

Zwodka

I'm in love with new Log window

So am I

Zwodka

I use Option Code 121 for static route.
It works fine with Windows, and some others devices.

Zwodka

When I read first time the "hap ac2" I thought ut will be the successor of the "hap ac", with more power. But not

Zwodka

Hi Normis!

1. I prefer the classic or Hex-S (!) style

2. The LEDs. On the classic style the LEDs much more visible.

But it is my opinion

Zwodka

There will be a non-TC (classic MikroTik style) version of hap ac2?

Zwodka

English, please !

Zwodka

/ip firewall nat add chain=dstnat protocol=tcp action=dst-nat src-address=192.168.0.0/24 dst-port=80,443 to-addresses=123.125.115.110

Zwodka

+1 useful feature

Zwodka

So finally a good design!

Zwodka

I'am also interested in, but I use only ethernet interfaces: /interface bridge port add bridge=Br-Lan interface=ether1 add bridge=Br-Lan interface=ether2 add bridge=Br-Lan interface=ether3 add bridge=Br-Lan interface=ether4 add bridge=Br-Lan interface=ether5 And: /interface bridge nat add action=src...

Zwodka

Hi All!

A would like to export only one address-list, not to all (for example BadBoys-List). I've search the on the web, but no succes

Zwodka

Try this (I use it): /caps-man channel add extension-channel=disabled name=Auto/20 add extension-channel=Ce name=Auto/40-Ce add extension-channel=eC name=Auto/40-eC add extension-channel=disabled frequency=2412 name=Ch01-2412/20 add extension-channel=Ce frequency=2412 name=Ch01-2412/40-Ce add extens...

Zwodka

I've tested these:
- ASIX AX88172 (D-Link DUB-E100 USB)
- ASIX AX88178 (Delock 61969)
- ASIX MosChip MCS 783x (Delock 61147)
These works fine

Zwodka

Radio mac is mac address of wireless card

Thanx!

Meanwhile I tested it.
Radio-Mac = Mac-Address of wireless card/device
Mac-Address = Mac-Address of the CAPsMAN's interface. It seems from wireless clients

Zwodka

What is the difference between Radio-MAC and MAC-Address?

Zwodka

Ok, I understand.
Topic is closed.

Zwodka

You can install OPC server that support SNMP from any manufacture not limited for some software company because OPC is standard, any SCADA system today must support reading information from OPC server. I personally don't like ModBus, I am Simens guy like ProfiBus, ProfiNet :) there is lot of protoc...

Zwodka

For example Siemens WinCC support SNMP using OPC, you can read data from Mikrotik using SNMP, also other SCADA software can do the some. Just type in google SNMP OPC server, enable SNMP on Mikrotik and rest is on your SCADA software or OPC server to support read data by SNMP. The OPC Server for SNM...

Zwodka

Hi MikroTik! Do you plan to implement Modbus support by RouterOS? I know it is not a IT standard protocol, but it is used most of the time in the industry. The Modbus (Tcp and/or Rtu) is a very simply protocol, therefore popular too. I'm an engeneer, and I'm in BMS/SCADA. We use MikroTik devices mor...

Zwodka

Hello,

At my local supplier I found "Sunon Maglev MC17080V1". 5V, 17x17x8mm, but 160mA. Max allowed is 150mA, so could 10mA make some damage?

BR...

Look around here:
http://www.sunon.com/tw/products/pdf/maglev.pdf

Zwodka

If this is the case already. Do you plan to make a "bigger" RB2011/RB3011 series with three group of 5-port Ethernet switch. For SoHo environment would be great

Zwodka

How/where can I set the Preamble Long or Short under CapsMan?
Or it is possible?

Zwodka

so you mean like a RB2011L ?

Amlost

But I think smaller and low weight one. Without display, maybe plastic case, under each other the 2x 4/5 ethernet ports.
Yes, I understand you, but ... It's a wish/desire

Zwodka

What to call this device? :-) Product like this exist only in one ethernet row - RB3011. RB3011 is: - big - robust - metal case - dual core - with display - expansion slot - 10x 10/100/1000 - 1x SFP - USB 3.0 - relatively expensive I talk/write about a: - small/compact size - plastic case - single ...

Zwodka

What to call this device?

Zwodka

"/caps-man provisioning add action=create-dynamic-enabled master-configuration=cfg1 slave-configurations=cfg2 add action=create-dynamic-enabled master-configuration=cfg1 slave-configurations=cfg3" Use the following formula: /caps-man provisioning add action=create-dynamic-enabled master-co...

Zwodka

I use a Rb951Ui-2hnd as wireless client in a multiple wifi environment. It works fine. I would like to create a script to monitor the wlan1 interface connection status: if wlan1 is not connected to Wifi-A change to the Wifi-B (or Widfi-C etc). How can I get in CLI and/or script the wlan1 interface c...

Zwodka

Oh, I miss it

Zwodka

You are right. The 144.4 is HT-MCS15 (20MHz, 2chain, 400ns). I didn't find it in your config it was a (very) quick answer

Sorry

Zwodka

"only 2 values are taken from the local interface configuration: antenna-gain and antenna-mode"

How do you know it?

Zwodka

MegaThanx!

Zwodka

Your device uses only one wireless chain (spatial stream). You have to set to use dual chain:

Zwodka

How/where can I set the HT-MCS under CAPsMAN?
I was suprised at the Antenna Gain adjust procedure under CAPsMAN:
http://forum.mikrotik.com/viewtopic.php?f=7&t=100111

Zwodka

wAP : Single Band device in 2015?

(

Zwodka

What else parameters affect to the CAPsMAN?

Zwodka

"You should set it on the wireless interface before you enable cap."

I've tried it. It works fine

MegaThanx

Zwodka

Hi All

Where can I set the Antenna Gain on a CAP device under CAPsMAN system (like Wireless\Interfaces\Antenna Gain) ?

Zwodka

Pfff... I've no idea

Zwodka

As I know, you have to create and define a Bridge Interface on the CAP device

Zwodka

Is there any way to change HT-MCS settings under CAPsMAN?

Zwodka

"You could switch to the 20-MHz-only option and see if it helps."

Ok, I use only 20MHz. But Intel Wifi Link still uses /1S (65Mbps-20MHz/1S).
I would like to see 130Mbps-20MHz/2S

Zwodka

"Are you somehow forcing 40 MHz channels?"

How can I make it?

Zwodka

"135 MBit/s Tx Rate is completely normal with this setup" Correct/complete the first test result: 1. Dell Latitude E6400 Windows 7 Pro x64 Intel Wifi Link 5300AGN (3x antennas), driver 2012.01.22. - 14.3.2.1 Connet with 2S -> 270Mbps-40MHz/2S 2. Lenovo G550 Windows 7 Pro x64 Intel Wifi Lin...

Zwodka

"How you are generating traffic when testing?"

Ohh! I have to generating traffic while testing? Nice!

I'll test again

)

Zwodka

Thx for the tipp! I've made a quick test: 1. Dell Latitude E6400 Windows 7 Pro x64 Intel Wifi Link 5300AGN, driver 2012.01.22. - 14.3.2.1 Connet with 2S 2. Lenovo G550 Windows 7 Pro x64 Intel Wifi Link 5100AGN, driver 2012.01.22. - 14.3.2.1 Connet with 1S 3/1. Hp ZBook 15 Windows 7 Pro x64 Intel Cen...

Zwodka

Hi All! I've tried several MT RB as AP - RB950G-2HnD, - RB950Ui-2HnD, - RB941-2nD, with Intel Wifi Link cars - Intel Wifi Link 5100 (3x antennas), - Intel Wifi Link 5300 (3x antennas), - Intel Cenrtino Advanced-N 6235 (2x antennas). The max connection speed always 135Mbps: 135Mbps-40MHz/1S. Always u...

Zwodka

Hi All!

When I want to use the Local-Forwarding on a CAP, I need to define a Bridge to work it. Where I define the Bridge? On the CAP device or on the CAPsMAN device?
If I define it on the CAPsMAN device all trafic go through the CAPsMAN, don't it.

Zwodka

+1 for florentrivoire LTS plant

Zwodka

It shows GN because that only-n mode only changes the basic-rates setting, G mode data-rates are still used. Here is the table with the explanation for each mode:
http://wiki.mikrotik.com/wiki/Manual:In ... Rate_table

MegaThanx

Zwodka

Hi All,

I use CAPsMAN and it works "fine". But when I change Cap-Interface -> Channel -> Band to "2ghz-onlyn" the interface shows me:
- managed by CAPsMAN
- channel 2432/20/gn(20dBm)
gn? Why?

Zwodka

all our devices can accept two power sources, it will work from one, and when it fails, use the other. The only thing to note, that the voltages must be different. If they are the same, it could fluctuate between these power sources and burn something. So if your Jack is 24V, use PoE with 18V and s...

Zwodka

Hi All,

Cen I use an mAp-2n with double power?
I mean: itself power adatper and same time PoE. I would like to make redundant powered device

Thanks

Zwodka

Hi All, I would like to limit a connection number of a node, both in/out connection. As I know I need to use 2 firewall rules: add action=drop chain=forward comment="TCP Connection Limits" \ connection-limit=51,32 disabled=no protocol=tcp src-address=11.22.33.44 \ tcp-flags=syn add action=...

Zwodka

Thanx for the answer!

Zwodka

Can I use a RB750GL as a "Smart Switch". The only thing the tash is Port based QoS/Priority.
I mean (example):
- port/ether1 and 5: high priority
- port/ether2,3 and 4: low priority
Maybe in the future (if'll needed) some traffic limit.

Thanx in advance

Zwodka

Ok, it's a good idea!
Thanx!

Zwodka

I plan to by a RB911G-2HPnD and a RB911G-5HPnD for AP. But they have Licence Level 3 : no Wireless AP permitted

But what about in CAPsMAN configuration?
I mean:
- one Licence Level 4/5/6 RB as CAPsMAN,
and
- RB911G-2HPnD/-5HPnD serie as CAP device.

Zwodka

Are you intending of load balancing or just want the 3G/4G as a failover in case the xDSL link is down? The first goal is the failover connection. Maybe in the future load-balancig. But in this case I prefer the dual xDSL link. My question is: I have to use Usb Over Ethernet Adapter or is there any ...

Zwodka

Thanx!

Zwodka

Hi All, Need some help. Ther is a 3-storey house: - basement: RB 2011UiAs-2HnD-IN acts as router + AP + switch (Raps1) - ground floor: RB 951Ui-2HnD acts as AP (Ap2) - first floor: RB 951Ui-2HnD acts as AP (Ap3) "Raps1" has a xDSL connection. Raised the possibility of a second connection w...

Zwodka

When bridging set

Code: Select all
/interface bridge settings set use-ip-firewall=yes

MegaThanx! It works fine!

What if I have more than 1 Bridge? Does it affect all Bridge?

Zwodka

Fastest, lowest, higher, lower ... doesn't matter.
I've tried it with only one Queue ... no success

(

Zwodka

Hi All! A would like to connect 2 or more ethernet interface with speed limit. For example: - ether1 -> ether2 : 10Mbps - ether1 -> ether3 : 20Mbps - ether2 -> ether1 : 30Mbps - ether2 -> ether3 : 40Mbps - ether3 -> ether1 : 50Mbps - ether3 -> ether2 : 50Mbps How can I do it? I've tried: - all ether...

Zwodka

The NetInstall solved my problem!

MegaThanx!

Zwodka

Thanx for the tip!
I'll try it!

Zwodka

Any another idea?

Zwodka

Hi,

How can I connect to the device?
Tcp/Ip? I don't know the Ip addrss of the device

MAC? "Could not connet to 4C:5E:0C:7C:16:DA (port 20561) - timed out!"

Zwodka

Hi All,

I've just upgrade my mAP2n from 6.24 to 6.25.
I drog and drop the file to the "System/Packages" (routeros-mipsbe-6.25.npk) and "System/Reboot".
After that almost all LED light (exept PoE Out", and approximately 15sec they go Off for a short time and again On.

Zwodka

Example:

There are two subnet
192.168.211.254/24
192.168.70.254/24

/ip firewall filter
add chain=forward action=drop src-address=192.168.211.0/24 dst-address=192.168.70.0/24
add chain=forward action=drop src-address=192.168.70.0/24 dst-address=192.168.211.0/24

Zwodka

Hi All!

When I add a new Interface there are two MAC: "mac-address" and "radio-mac".
What is the difference?

Z,

Zwodka

When I add a new Interface there are two MAC: "mac-address" and "radio-mac".
What is the difference?

Zwodka

please try to use CAPsMAN v2
The seconds CAP interface is also added to some bridge port?

What do you see in the log file when the client tries to connect to the SSID?

1. I'll try the CAPsMAN v2.
2. Yes, it is added to the same Bridge as Master Interface.
3. I'll see it.

Zwodka

Hi All! I get to know the CAPsMAN topic. I tried a following: - CAPsMAN: RB951G-2HnD - Cap1: Wifi of RB951G-2HnD - Cap2: Wifi of RBmAP-2n My first step was success: one SSID on both devices. Everithing works fine. But when I set a second SSID (guest wifi)... No one wifi device can connect to the sec...

Zwodka

If you simply give higher priority to one of the targets you can end up with your 192.168.81.0/24 using all your bandwidth leaving your other subnet without any. The way I would prioritize is by defining 2 simple queues one for each target subnet. Allow max-limit 10M/20M on both queues so both subn...

Zwodka

Hi All! I get to know the Simple Queue topic. I use a Rb951G for internet sharing: - 10M up / 20M down - 2 subnet First of all I would like to share the bandwidth evenly distribute.I tried this: add dst=ether1-gtw max-limit=10M/20M name=Sq-Lan1-Lan2 priority=8/8 queue=default/default target=192.168....

Zwodka

Hi All! A trie to use the Brute Force prevention for Ftp http://wiki.mikrotik.com/wiki/Bruteforce_login_prevention_(FTP /ip firewall filter add chain=input protocol=tcp dst-port=21 src-address-list=ftp_blacklist action=drop \ comment="drop ftp brute forcers" add chain=output action=accept ...

Search found 78 matches