I upgraded a RB3011 to 6.39.1, it was 6.37.5. After the upgrade, everytime a CPE disconnect and connect again the PPP/PPPoE dont send the deauth info to FreeRadius and dont free the IP that the CPE was using, so after the CPE login again the get a new IP and the IP he was using still remaing on the ...

Missconfiguration of OSPF?

MikroTik we really need this!!!!!!!!!

Please fix OSPFv3, Mikrotik isnt following the RFC. https://tools.ietf.org/html/rfc5340#appendix-A.2 perhaps you right, its "not completely imlemented" case. same about DNS, IPv6 stack and other things (like netfilter portions, RIP and etc generallty legacy stuff). I cant run OSPFv3 with ...

Please fix OSPFv3, Mikrotik isnt following the RFC.

https://tools.ietf.org/html/rfc5340#appendix-A.2

When OSPFv3 will be fixed? Still cant use it with different manufacter!

OSPFv3 is running fine with H3C/Comware 5 (HP A series switches) here.

I trying to run this with an EdgeRouter Pro.

When OSPFv3 will be fixed? Still cant use it with different manufacter!

*) route - fixed ospf by handling ipv6 encoded prefixes with stray bits; Looks like OSPF is not working properly with rc6 because of this fix. Please use with caution. This change will hopefully fix problems when two OSPFv3 neighbors are stuck in Exchange/ExStart states. OSPFv3 still not working wi...

@strods

And what about the problem with OSPFv3 with EdgeRouter, mikrotik reject EdgeRouter OSPFv3 because of a flag AF which EdgeRouter sends, but in RFC says that unrecognized bits should be ignored.

MikroTik dont recognize ospfv3 bits from edgerouter, mikrotik should ignore unrecognized bits and process the packet normally as decribed in the RFC,

Look at RFC https://tools.ietf.org/html/rfc5340#appendix-A.2

I have the same problem, any workaround?

My RB921 negotiate only 100mbps Full, when I try to use PoE Gigabit my RB cant negotiate at 1GB full, when I connect the cable the led of 1gb start blink but not negotiate and I cant access my RB. Using ROS 6.34.1.

Can we have a sms/email alert for agent probe? So we will receive on our smartphone alerts if any equipment goes down.

+1 for spectral-scan!

No, the ISP router show as failed in ND.

When I mean WAN/LAN is the /126 from ISP. WAN is the ISP and LAN is me.

And no, cant ping the ISP through ether1.

My RB is 1100AHx2 with 6.27 ros, and no firewall.

Hi, I received /126 from my ISP to configure IPv6 on my routeros, and want to configure it to connect bgp peer v6. WAN of ISP: 2804:7f4:4001:28::1/126 My LAN: 2804:7f4:4001:28::2/126 Look what I did: [radionet@BORDA-RADIONET-BGP] > ipv a pr Flags: X - disabled, I - invalid, D - dynamic, G - global, ...

Hi,

I'm testing my new pair of RB921UAGS-5SHPacD-NM...

When changing package from wireless-fp to wireless the device doesnt recognize wlan, wireless table apear empty...

is it normal?

Thanks!