I upgraded a RB3011 to 6.39.1, it was 6.37.5. After the upgrade, everytime a CPE disconnect and connect again the PPP/PPPoE dont send the deauth info to FreeRadius and dont free the IP that the CPE was using, so after the CPE login again the get a new IP and the IP he was using still remaing on the ...
Please fix OSPFv3, Mikrotik isnt following the RFC. https://tools.ietf.org/html/rfc5340#appendix-A.2 perhaps you right, its "not completely imlemented" case. same about DNS, IPv6 stack and other things (like netfilter portions, RIP and etc generallty legacy stuff). I cant run OSPFv3 with ...
*) route - fixed ospf by handling ipv6 encoded prefixes with stray bits; Looks like OSPF is not working properly with rc6 because of this fix. Please use with caution. This change will hopefully fix problems when two OSPFv3 neighbors are stuck in Exchange/ExStart states. OSPFv3 still not working wi...
And what about the problem with OSPFv3 with EdgeRouter, mikrotik reject EdgeRouter OSPFv3 because of a flag AF which EdgeRouter sends, but in RFC says that unrecognized bits should be ignored.
My RB921 negotiate only 100mbps Full, when I try to use PoE Gigabit my RB cant negotiate at 1GB full, when I connect the cable the led of 1gb start blink but not negotiate and I cant access my RB. Using ROS 6.34.1.
Hi, I received /126 from my ISP to configure IPv6 on my routeros, and want to configure it to connect bgp peer v6. WAN of ISP: 2804:7f4:4001:28::1/126 My LAN: 2804:7f4:4001:28::2/126 Look what I did: [radionet@BORDA-RADIONET-BGP] > ipv a pr Flags: X - disabled, I - invalid, D - dynamic, G - global, ...