Community discussions

MikroTik App

Search found 14 matches

by nstorm
Wed Apr 29, 2015 2:56 pm
Forum: General
Topic: Disable InterVLAN routing
Replies: 1
Views: 1248

Re: Disable InterVLAN routing

Nevermind, I've found what that was the other router, who was routing between VLANs. I've fixed its config and now everything works as intended, CRS125 doesn't forwards traffic with the above config.
by nstorm
Wed Apr 29, 2015 12:50 pm
Forum: General
Topic: Disable InterVLAN routing
Replies: 1
Views: 1248

Disable InterVLAN routing

Hello. I have CRS125 switch. Its configure with 2 VLANs created in switch ASIC, a trunk port (ether1+ether2) with both trunked VLANs. I've also created VLAN IP interfaces on CPU and attached them for the purpose of managing switch from both VLANs. Only 1 master port, no bridge. I know that this will...
by nstorm
Fri Jan 23, 2015 12:04 pm
Forum: General
Topic: SFP+ 10gig ports - need more than two SFP+
Replies: 4
Views: 1443

Re: SFP+ 10gig ports - need more than two SFP+

A year has passed since this thread was opened, but Mikrotik didn't offered any products with more SFP+ ports so far. I'm bumping this thread to remind that this suggestion are really could be useful for many. With recent development of 10G networks even new mid-range servers has 10G ports. With onl...
by nstorm
Tue Dec 02, 2014 10:00 am
Forum: General
Topic: CRS Bridges and VLANs
Replies: 2
Views: 849

Re: CRS Bridges and VLANs

I'm pretty disappointed what this forum doesn't helps much with CRS. I've got an advice on other forums. I'll just leave it here in case someone else will face same issue. The solution offered was pretty simple - use bridge filter to filter out unwanted VLANs and untagged egress traffic. I haven't t...
by nstorm
Wed Nov 26, 2014 7:34 am
Forum: General
Topic: CRS Bridges and VLANs
Replies: 2
Views: 849

Re: CRS Bridges and VLANs

Anyone?
by nstorm
Mon Nov 24, 2014 10:26 am
Forum: General
Topic: CRS Bridges and VLANs
Replies: 2
Views: 849

CRS Bridges and VLANs

Hello. I have a few CRS226-24G-2S+ units. I want them to act as a basic L2 switches actually for now with VLANs, trunking and RSTP. I can do VLANs and trunking with the switch chip, but unfortunately swtich chip doesn't has the RSTP functions, so I have to add a software bridge to enable this functi...
by nstorm
Thu Oct 09, 2014 12:48 pm
Forum: Beginner Basics
Topic: CRS VLAN mystery
Replies: 14
Views: 5439

Re: CRS VLAN mystery

For example I have this config and I doesn't works as intended. I would like to have ether1-2 as a switch trunk ports (bonded) and also trunk ports (passing tagged VLANs), with ether9-16 on VLAN 91 PVID and ether17-24 VLAN 92 PVID. While I have ether3-4 added as another port group with ether3 maste...
by nstorm
Wed Oct 08, 2014 3:58 pm
Forum: Beginner Basics
Topic: CRS VLAN mystery
Replies: 14
Views: 5439

Re: CRS VLAN mystery

Ok, I've tried setting every port to a ether3 as a master, and temporary removing trunk from switch configuration. It doesn't works right for me, right now I can ping IP on VLAN91 interface from any port, cept for those I've specially allocated as vlan91 access ports ;P But I guess that is because I...
by nstorm
Tue Oct 07, 2014 3:44 pm
Forum: Beginner Basics
Topic: CRS VLAN mystery
Replies: 14
Views: 5439

Re: CRS VLAN mystery

I think I have found the cause of this problem in "test1.rsc" configuration. You have set two "master-ports", but it restricts VLAN functionality on CRS. From wiki: Note: Multiple master-port configuration is designed as fast and simple port isolation solution, but it limits part of VLAN functional...
by nstorm
Thu Oct 02, 2014 8:07 am
Forum: Beginner Basics
Topic: A good VPN provider for Mikrotik RB750GL running 5.26 ?
Replies: 4
Views: 1467

Re: A good VPN provider for Mikrotik RB750GL running 5.26 ?

As an alternative may I suggest you getting a Linux VPS box instead if you need only one location? That way you'll have your own dedicated IP and your own VPN server software config, you can adapt to use with Mikrotik. And it will be much cheaper. You can get a lowend VPS (more than enough for VPN) ...
by nstorm
Thu Sep 25, 2014 8:29 am
Forum: Beginner Basics
Topic: Route LAN IP to another LAN
Replies: 4
Views: 1223

Re: Route LAN IP to another LAN

No NAT is needed.
NAT is needed if devices behind LAN2, LAN3 doesn't know routes to LAN1 subnet. I.e. if the same Mikrotik device aren't default router for them.
Of course it is better to setup routes there, than to NAT it.
by nstorm
Thu Sep 25, 2014 8:22 am
Forum: Beginner Basics
Topic: Multiple gateways same subnet
Replies: 3
Views: 2731

Re: Multiple gateways same subnet

I don't think having these on the same subnet behind the same port really matters here. You just don't have to setup all the IPs for every subnet and even NAT. Most important part in ECMP routing is: / ip route add dst-address=0.0.0.0/0 gateway=10.111.0.1,10.112.0.1 check-gateway=ping I.e. it assign...
by nstorm
Wed Sep 24, 2014 2:22 pm
Forum: Beginner Basics
Topic: CRS: VLAN, Master-slave & isolation best practice?
Replies: 1
Views: 896

CRS: VLAN, Master-slave & isolation best practice?

Hello. I've got a CRS125-24G-1S for SOHO needs. Basically it will operate as L2 access switch for 2 small separate networks (VLANS) which should be isolated from each other and a server with 2 different VMs as gateways. Those 2 VLANs should be completely separated and doesn't requires inter-communic...
by nstorm
Wed Sep 24, 2014 1:55 pm
Forum: Beginner Basics
Topic: Multiple gateways same subnet
Replies: 3
Views: 2731

Re: Multiple gateways same subnet

Checkout http://wiki.mikrotik.com/wiki/Load_Balancing , especially http://wiki.mikrotik.com/wiki/ECMP_load_balancing_with_masquerade You'll never get a real load balancer as like with bonding though. It would be either srcip (i.e. all traffic from one client goes throught one router), or a session b...