Hey, Have you tried /system routerboard usb set type=mini-PCIe I have seen issues before with my RBM11G + R11e-LTE and this fixed it, AFAIK this tells the board to supply the PCI with the correct power VS usb that command is needed to see the card if it is mounted in one of the slot. it does not im...
Hi we are using R11e-LTE on RB953GS-5HnT-RP on 100+ units, and several units exhibit reliability issues: * R11e-LTE not recognized by ROS sistematically * R11e-LTE not recognized by ROS on warm reboot, but works after cold reboot * R11e-LTE not recognized by ROS on warm reboot, but works after cold ...
I just discovered that my mactelnet (debian mactelnet-client 0.4.4-4 package) can't login anymore with routeros 6.45.3, and probably with any version later than 6.43 is there a plan to update the mactelnet package (https://github.com/haakonnessjoen/MAC-Telnet)? I need it to work on mikrotik routers ...
regarding this change: !) api - changed authentication process (https://wiki.mikrotik.com/wiki/Manual:API#Initial_login); as we have an application based on Net_RouterOS library (https://github.com/pear2/Net_RouterOS/), which is long unmantained, I tried 6.43, expecting it to break our application. ...
when a wireless interface is radar-detecting, it not available to establish connections.
this should be immediately visible with a flag in /interface wireless, either the I (inactive) or new dedicated flags for "searching frequency" and "radar detecting"
SSH command output can be saved with "output-to-file" option. 1) true, thanks (meanwhile I had found it out too) 2) but there is another quirk: the file content is not immediately available, you need to insert a delay between creating the file and reading it (sic): :global GoldenUser; :gl...
not sure if there is a feature to redirect the output to a file (afterall, routeros is Linux-based). can you try this.. /system script> run test file=someoutput.txt and see if that is what you need? parameter is not supported: [toor@PEAMI-GW] /system script> run test file=someoutput.txt expected en...
Hi I'm trying to connect from one router to another to get wifi signal-strength :global GoldenUser; :global GoldenIP :local myMac E4:8D:8C:26:DC:03 do { :local out [[ /system ssh user=$GoldenUser $GoldenIP ":put [/interface wireless registration-table get [ find mac-address=$myMac ] signal-stre...
The oid for LTE signal strength is 1.3.6.1.4.1.14988.1.1.16.1.1.2 the last digit of the OID is the interface ID, and on my unit (RB953GS-5HnT with one ME909u-521) it happens to be 3: IF-MIB::ifDescr.3 = STRING: lte1 and at least the GETNEXT SNMP operation works fine, then snmpwalk is able to find t...
hi I get the wrong result type from SNMP (STRING instead of INTEGER, and including the unit) as a result, I'm forced to use a script in my monitoring software (zabbix) to clean it and store the result as a number that I can graph # snmpget -v1 -c <COMMUNITY> <IP> .1.3.6.1.4.1.14988.1.1.16.1.1.2.3 MI...