Hi, Having the same problem here. I have sent a support request to MikroTik about it. In my situation, Cambium and Android clients were affected but Ubuntu Linux machines were not. A reboot solved the problem temporarily for now. Looking forward to there reply. Hi again, Solution to this problem wa...

Hi,

Having the same problem here. I have sent a support request to MikroTik about it. In my situation, Cambium and Android clients were affected but Ubuntu Linux machines were not. A reboot solved the problem temporarily for now. Looking forward to there reply.

quite inconsistent In what way? I was personaly going for the max 10 second avg over a 20 second periode, and picking the 'true' 10 second avg should at most be a matter of taste? (and so is 1000 and 1024 as long you are consistant in what you comape with) I see the difference now. In your script, ...

After experimenting with your script, I find the output results are actually quite inconsistent compared to what the "bandwidtht-test" tool reports. After some testing, I finally got consistency. Here is the resulting script: /tool { :local rxAvg 0 :local txAvg 0 bandwidth-test 1.2.3.4 dur...

Hi, I have tried your script and it works fine. The only thing is that your calculation is wrong. We are dealing with transmission speeds and not data capacities. Transmission speeds use bits per second and data capacities use bytes. So the following is incorrect: :put ("tx: " . ($txAvg / ...

Hi I have just tried 6.39rc7 on a RB2011UiAS-2HnD-IN. A lot of client equipment seem to connect fine with or without encryption. Unfortunately, an old Intel 2200BG client cannot connect to it no matter if I use WPA2 encryption on it or not. To confirm that the Intel 2200BG card worked, I tested it u...

Same problem here, except downgrading to 6.37.3 also makes the vlan problem disappear. This was tested on a hAP ac. Other MikroTik and X86 devices do not seem to have this problem though. The STP/RSTP compatibility issue does not seem to affect me though as I have 6.37.3 on hAP ac, 6.38 on X86 PC an...

Hi, I have been testing both 6.37.1 and 6.37.3 on the 2.4Ghz band. Both versions seem to have problems when legacy clients using the Intel 2200BG chipset try to connect. Linux clients (Ubuntu 16.04.1, Kernel 4.4.0-57) give the error "Association request to the driver failed", on mikrotik s...

I agree, the table layouts in the console don't make sense sometimes - why do they use so much column space for just ip addresses? Qiet72 Hi Mikrotik, Would it be possible to allocate more space for VERSION string? Why there's so much space reserved for ADDRESS? https://s13.postimg.org/6xsea31pz/Scr...

I seem to remember that you have to use the mac address of the ap you want to connect to instead of the ssid when you want to connect to a hidden access point. Qiet72 Thanks for your answer, I tried it without success. My Ap has several hidden wifi with the same mac, so how can the microtik connect...

Is it possible to use the wireless-connect-list to connect to HIDDEN ssid's? Am I blind, or is there no possibility?

I seem to remember that you have to use the mac address of the ap you want to connect to instead of the ssid when you want to connect to a hidden access point.

Qiet72

6.37rc36 @ RB433 does not see rc38 for download. OK, I have now updated to the latest rc (6.37rc40) by downloading from mikrotik.com/download and updating routeros manually. I did the same test: Do a download via the 5Ghz 802.11ac. My hardware is an Intel 7260 a/b/g/n/ac adapter. When I download vi...

Here is a temporary fix/workaround until the source problem is fixed:

/interface bridge filter
add action=drop chain=input mac-protocol=0x9ABE
add action=drop chain=forward mac-protocol=0x9ABE

Regards,
Qiet72

6.37rc36 @ RB433 does not see rc38 for download. OK, I have now updated to the latest rc (6.37rc40) by downloading from mikrotik.com/download and updating routeros manually. I did the same test: Do a download via the 5Ghz 802.11ac. My hardware is an Intel 7260 a/b/g/n/ac adapter. When I download vi...

6.37rc36 @ RB433 does not see rc38 for download.

I stand corrected. Thank you. I will re-check the version and try again with latest.


Sent from my iPhone using Tapatalk

Hi, Currently running 6.37rc38 on a hAP ac. I noticed that my laptop with an Intel 7250 wireless card cannot seem to receive mimo (dual chain) at the higher rates of 802.11ac but works perfectly when connected to my Asus RT-AC68U router. The issue seems to only happen on receive (to laptop), not tra...

We are also just now seeing the same ethertype packets flooding about 0.4% of our network and they are also only coming from MikroTik access points (Metal 2SHPn). I am also just as stumped on what they are - they are exactly 32 bytes in size and data is the same for every broadcast from the same dev...

It's very inconvenient to install additional client version each time the dude is updated. Please, make the client more universal like winbox is to allow the connection to multiple server versions.

+1 I agree very much with this.  Alternative is to use a web interface.
Quinn

Hi, In version 6.35.4, "the dude" seems to create multiple "builtin" panels each line with "admin <ip address>" which cannot be removed.  If you try, it would just say "cannot change builtin". Is there anyway to remove these multiple "builtin" panels...

Here is an interesting setup we really would like find a solution to: "Public Internet" <-> "datacenter gateway with 172.24.x.x/30" <-> "Mikrotik router: ether1-WAN: 172.24.x.x/30, LAN bridge ports: 117.252.x.x/29" <-> "Server machines: 117.252.x.x/29" We have...

Hi, I have the following setup: ================= Access Point (Metal 2SHPn) | 192.168.88.0/24 | Router (750UP) | <Public IP> | VPN Server ================= On the Router, I have pptp-client connecting successfully to the VPN server. On the access point, the pptp-client does not seem to connect succ...

Hi, Normally when the hotspot functionality is enabled, the firewall input rules look somewhat like this: /ip firewall filter> pri chain=input Flags: X - disabled, I - invalid, D - dynamic 0 D chain=input action=jump jump-target=hs-input hotspot=from-client log=no log-prefix="" 1 D chain=i...

Interestingly, Cisco has built in support for changing the NAS-IP-Address for situations like this:

http://www.cisco.com/c/en/us/td/docs/io ... p_cfg.html

Quinn

Hi, I have found an interesting problem with the current mikrotik OS (6.28). Here are some scenarios: Scenario 1: Mikrotik 1 IP: LAN:192.168.88.1 / WAN: <PUBLIC IP 1> FreeRadius server IP: <PUBLIC IP 2> Scenario 2: Mikrotik 1 IP: LAN:192.168.88.1 / WAN:192.168.1.20 ADSL Modem IP: LAN: 192.168.1.1 / ...

Thanks,

I got it working. I was missing the following line on MikroTik 2:

"add action=add-src-to-address-list address-list=ssh_stage1 address-list-timeout=1m chain=ssh connection-state=new disabled=no"

Thanks for the help.

Quinn

Hi, I am trying to implement a blacklist procedure for ssh attacks. I can successfully get the following procedure to work on one MikroTik router: http://wiki.mikrotik.com/wiki/Bruteforce_login_prevention_%28FTP_%26_SSH%29 But how do I implement it on a MikroTik router that is behind another MikroTi...