The console could be useful to at least see what error messages might be showing up there when the router hangs. their is no null modem cable connection that i can see anywhere on the router it does have a rj45 connection on the back of it that i have no idea what it does i assumed it was the netin...

hi i have had my mikrotik for about a year now and its been pretty good recently it started to play up on boot it just says on the lcd "loading kernel from nand" it will sit there and do nothing for hours if you let it some times when you boot it up hitting the reset button a couple of tim...

anyone else still getting this bug where once it goes over 100gb of usage it resets it self to 0 in the tool ?

Cacti (or any other SNMP type of system) is going to be your best bet. The 100M limit sounds suspiciously like a strange limit I had with Cisco routers. The fix was to configure the data source in Cacti to use 64 bit counters. I'm not certain if MT supports this, but I would think they do. ahh yes ...

i have never been able to find a way to keep track of my usage .. now if you look at the interface you can see how much the wan has used but soon as you reboot the router the details are lost im just a home user who runs some small servers from here as a hobby so im not a wireless isp or anything wi...

the tool as a major bug... not sure if its resetting when it gets to 100gb or if the remote collector is rebooted it seems to reset the couter

this tool is pretty awesome i must admit i like it alot :D :D i have but one question is this tool grabbing data written to the routers memory or is it polling and collecting data in real time the question i ask is if i was to turn off the machine with the service running.. if i was to turn it off a...

still no luck :( rebooted as well current config so ive changed nat to the pppoe-out1 not to sure what to put in filters i remved the ones i had mad thinking they could have been the issue.. so now filters i think is in its default state not sure what to do next EDIT: got it going :D had to move rul...

hi all my network setup is basic using the default config wan is on ether1 via a fibre connection using pppoe dynamic ip address lan is on eth2 to a unmanaged switch doesn't matter what i do cannot get it to connect from other wan connections its a team speak server so udp port 9987 local lan ip to ...

howdy all i have a 100mbps down 40mbps up fibre connection from my isp with a simple NTD at the moment i have a edgerouter lite with pppoe wan set to eth1 and then lan set to eth2 it goes to a simple unmanaged 24 port gigabit switch witch seems to work fine i have just bought a RB2011UiAS-RM now i k...