Pretty nice news.
But LHG should be ac and with gigabit ethernet.

If you need AC and gigabit Ethernet, just choose DynaDish.

LHG Cost only $59. It's Low End Device

It's Mipsbe

I already got a few hAP ac lite (952Ui-5ac2nD).

I guess we will have also hAP ac really soon.

Thank you maximan, i am read wiki already but actually i cant understand. 32 is maximum managed AP per capsman is it right ? NO. Manual Says about "Radios per CAP" (number of WLAN interfaces on each CAP Access Point) and "Virtual interfaces per master radio interface" (Virtual A...

Wireless for Home and Office
- Ceiling (Like cAP) Dual Band 802.11ac AP with 802.3af/at and Dual Ethernet

Switch
- CRS models with 802.3af/at out & PoE Passive

Filter "content" is not content of URL, but content of packet. for URL filtering you can use Transparent Webproxy with Access List rules You are not able to do it while transparent proxy is not working with HTTPS. Yes you are right, I forgot to mension that Proxy doen't work with HTTPS

Filter "content" is not content of URL, but content of packet.

for URL filtering you can use Transparent Webproxy with Access List rules

It's normal the firewall rules not working on your Network.

Your MikroTik ACT only as a DHCP Server, not as a Router/Firewall.

I suggest to use MikroTik as Router (MikroTik PPPoE -> aDSL Modem/Router in Bridge Mode) in order to use MikroTik Firewall features.

My network is 1 PC as router (DHCP Server etc), 1 DSL modem (gateway), and another wifi AP.

1) Where is the MikroTik?
2) The MAC Address you want to block is connected wired or Wireless (If Wireless, what AP you use?)?

Switch1: Port 1, 2, 3, 4, 5 (10/100/1000 Ethernet ports)
Switch2: Port 6, 7, 8, 9, 10 (10/100 Ethernet ports)

You can find the above information on device Block Diagram http://i.mt.lv/routerboard/files/Block-RB2011.pdf

Wireless > Registration > RX/TX Signal Strength

It depend on your Priorities. For a 70m Link, I think fail-over is a little overstatement. If I were you, I should looking for an MiMo Nstreme dual Configuration (full duplex) http://wiki.mikrotik.com/wiki/Manual:Interface/Wireless#Nstreme_Dual http://wiki.mikrotik.com/wiki/Nstreme_dual_Step-by-Step...

On "Access List" add an AP Access Rule adjusting the Signal Strength Range.

Don't forget to Uncheck "Default Authantication" on wlan interface.