Nobody outside of hardware vendors uses IXIA anymore for general lab/validation work unless they just want to waste money, that was popular years ago. I sad for example. Cisco TREX is good without further ado We've only had the boxes for a week and are working on building Cisco TREX servers for ext...

2.1 million (2,162,473) IPv4 routes converged in 44 seconds and withdrawn in 46 seconds under a 25G load with 12% CPU This equal to or faster than Juniper MX and Cisco ASR9K for the same number of routes. Did you test it with HW offloading? Did you achieve the 25G traffic through 1 route? If so it ...

@doush, how do you use CCR1072 now? What scenario?

The product description "100Gbps router" is an usual marketing BS and it's always up to buyer to assess if the product is fit for certain use case. Thanks for agreeing with me. That's exactly what I meant. But unfortunately many users content with marketing BS and as result suffering. I d...

I just don't see why are you bitching about it. First of all I am not bitching. I ask you to be more respectful. Secondly I did not say "what kind of trash have you created". I just disagree with positioning of product. They say "it is 100G router!!!". But it is not. This produc...

you can influence which routes get offloaded Realy? You got 1M routes or more through BGP. How could you influence which routes will be offloaded? OK with the help of filters we can suppress HW offload fore some routes. But we need to find these routes and make it manually. It is bull shit. I don't...

check out how does L3HW actually works?.

I have already read it. And it is totally confirm my concerns. I don't understand what do you try to explain me?

Any IPv4 routing done within the routing tables of the switch chip will be done in wirespeed. Not any. Only that traffic which traverse through the routes what will be fitted into the marvell chip's FDB. But this only 128k routes. Have you actually checked on how many routes >90% of your traffic fl...

(we are thinking about replacing our 1072s with something better, either with a CCR2216 or an MX204 box)

It is very strange comparison even based on the price. I talk about CCR2216 and MX204. If you can afford to buy MX204 of course choose it. It will be much much better.

This is very strange product. CCR2216.PNG Mikrotik team, why did you add 25G and 100G interfaces for that architecture? Obviously that we can use effectively only 10 interfaces with 10G mode. Because internal bus can pass through to CPU only 100G. You can say "we have HW offloading". FDB.P...

BGP Link Bandwidth Extended Communities
https://tools.ietf.org/html/draft-ietf- ... ndwidth-07

Please make the opportunity to make rules for the firewall with timerange starting today and ending at some time tomorrow. For example from 20:00:00 to 06:00:00

OSPF and BGP Graceful Shutdown

+1 for vxlan!!!

Please add:
- Incremental SPF
- IP FRR (RFC5714) and microloops (RFC5715)
- LFA (RFC5286) & Remote LFA (RFC7490)

And it would be really great if you add:
- RSVP FRR (RFC4090)
- MRT (RFC7812)

RFC 3021

You want to create a configuration with the native vlan. Do I understand correctly? That is, the traffic from the port has to go in a few vlan tagged and one untagged? If so, then simply create multiple vlan on the port, and configure IP for them. And for the native vlan configure IP on a physical p...

Hi
Mikrotik Team.

Actualize answer to the question. Considering that in the download section has RouterOS for ARM, now Banana PI BPI-R1 will work with RouterOS. Am I right?
It is especially interesting due to with the release of Banana PI BPI-R2

+ 1

MPLS TE Fast Re-Route MPLS TE Link Protection MPLS TE Link-Node Protection MPLS TE behavior similar to Cisco Class Based Tunnel Selection MPLS TE Diffserv-Aware tunnels MPLS Segment Routing extensions to OSPF/ISIS ISIS Multicast separation of RPF table calculation into individual routing table and ...

Hi, MikroTik team.
When MPLS will have features such as fast reroute and node/link protection? Without this functions MPLS TE is imperfect.

Greetings colleagues. At once I want apologize for my english. I propose to share the experience (positive or not) of using CCR as BRAS. You can answer the questions below. And also can add your observations, which can share. 1. What model of CCR are you using? 2. What type of termination sessions a...