Community discussions

MikroTik App

Search found 63 matches

by inquiery
Mon Jan 23, 2023 10:34 pm
Forum: General
Topic: Ping with VRF fail
Replies: 0
Views: 538

Ping with VRF fail

Hello, I am using an CCR with ROS v7.6 and I want to import some scripts from v6. Those scripts uses "routing-table" parameter from "ping" command, but it does not exists in v7, instead we need to use vrf. I have created a bridge interface, with no ports, called "lo-vrf"...
by inquiery
Tue Aug 31, 2021 12:54 am
Forum: General
Topic: Remote access through VLAN on CRS317
Replies: 2
Views: 721

Re: Remote access through VLAN on CRS317

Sorry for that. Actually, the VLAN I use is 3902, but after I exported the configs to create the topic, I thought "I will change the 3902 to 1000 for easier reading", and I forgot to change that one. But in my configs, the ID is all 3902, I have already checked many times if I didn't wrote...
by inquiery
Fri Aug 27, 2021 8:00 pm
Forum: General
Topic: Remote access through VLAN on CRS317
Replies: 2
Views: 721

Remote access through VLAN on CRS317

Hi I'm trying to figure out a detail for a VLAN scenário that is rendering me unable to access one of the switchs. In the diagram attached, I have a switch (named "Switch" in the diagram) and two CRS317 (named "CRS #1" and "CRS #2" in the diagram). I have a network on m...
by inquiery
Wed Aug 18, 2021 10:00 pm
Forum: General
Topic: CCR1036-8G-2S+ regular packet loss
Replies: 4
Views: 1006

Re: CCR1036-8G-2S+ regular packet loss

Have you checked the Logs on all your devices ? Yes. All the time. There is no error nor warning of any kind. I have a CCR1072 which I can use to replace that CCR #1 (it is a CCR1036-8G-4S+), but I want to find where the issue is, so I know if I can keep using that CCR1036 or send it to warranty. I...
by inquiery
Mon Aug 16, 2021 11:54 pm
Forum: General
Topic: NAT Bypass
Replies: 8
Views: 1799

Re: NAT Bypass

Instead of:
action=masquerade chain=srcnat
You could use
action=masquerade out-interface=YOUR_WAN_INTERFACE chain=srcnat
As suggested by xvo
by inquiery
Mon Aug 16, 2021 11:18 pm
Forum: General
Topic: CCR1036-8G-2S+ regular packet loss
Replies: 4
Views: 1006

Re: CCR1036-8G-2S+ regular packet loss

Hello, On the CCRs there are no bridges, and on the CRS #2 (where a loop might seem possible) the interfaces 3 and 2 have forward only to interface 1: [Nettfacil@CRS-2_RACK-1] /interface ethernet switch port-isolation> pr Flags: I - invalid 0 name="sfp-sfpplus1" switch=switch1 1 name="...
by inquiery
Thu Aug 12, 2021 5:46 pm
Forum: General
Topic: CCR1036-8G-2S+ regular packet loss
Replies: 4
Views: 1006

CCR1036-8G-2S+ regular packet loss

Hello, I'm going throught a dificult with one of our CCR1036-8G-2S+, where it regularly lose packets every 10 seconds. In the diagram attached, the CCR #1 is the one with the problem. If I ping it, on any of it's IPv4 address from any other CCR, it regularly fails for a fraction of a second, every 1...
by inquiery
Fri Feb 26, 2021 5:38 pm
Forum: General
Topic: Winbox glitch
Replies: 15
Views: 3413

Re: Winbox glitch

Did some more experimentatio. Untill now I have just accepted the glitch, never took the time to test things out. I found out now that the glitch only occurs when the window Interface is open, and each time that the interfaces refresh it's data, if I am holding the mouse button down to move a item o...
by inquiery
Fri Feb 26, 2021 4:10 pm
Forum: General
Topic: Winbox glitch
Replies: 15
Views: 3413

Re: Winbox glitch

I've been doing some more testing this morning. I have some CCR1009 that I don't frequently access with Winbox, and they don't show the same glitch. Those CCR1009 are used for internet networking, in the office. In the other hand, I have another CCR1009, in a remote site, that runs PPPoE server and ...
by inquiery
Fri Feb 26, 2021 2:09 pm
Forum: General
Topic: Winbox glitch
Replies: 15
Views: 3413

Re: Winbox glitch

It's on a desktop PC, with a mouse.
by inquiery
Thu Feb 25, 2021 11:54 pm
Forum: General
Topic: Winbox glitch
Replies: 15
Views: 3413

Re: Winbox glitch

I'm using Windows 10.

I have no ideia what is causing it, and the problem persisted even through SO reinstalations.
by inquiery
Thu Feb 25, 2021 8:40 pm
Forum: General
Topic: Winbox glitch
Replies: 15
Views: 3413

Winbox glitch

For quite some time now, I'm having problems with Winbox. When it started happening (I think it was more than a year ago), I thought it could be only a glitch that would be patched in a next revision of Winbox. But the problem persisted by all winbox updates. The problem I face is when trying to mov...
by inquiery
Thu Mar 12, 2020 3:47 pm
Forum: Scripting
Topic: Firewall Filter RATE: How to access value in script?
Replies: 4
Views: 3302

Re: Firewall Filter RATE: How to access value in script?

No solutions for that yet? I was trying to get those rules rates also, with scripts, and couldn't find the properties.
by inquiery
Tue Aug 16, 2016 2:51 am
Forum: Forwarding Protocols
Topic: Gateway in a device reacheble on another router by OSPF
Replies: 0
Views: 829

Gateway in a device reacheble on another router by OSPF

Hello, I have a small network with basic OSPF configured. On the first RB I have a network behind it on ether2 (10.2.2.0/24), and another RB on port ether1. I announced the network 10.2.2.0/24 and the second RB can reach devices on that network. Now, I want to use uma device on that network as a gat...
by inquiery
Wed Jun 22, 2016 3:52 am
Forum: Beginner Basics
Topic: Jump seems not to capture all packets it should
Replies: 2
Views: 1171

Re: Jump seems not to capture all packets it should

I have 3 routing tables, named "Route-Link1", "Route-Link2" and "Route-Link3". So,the very first packet of any connection request will be send to a custom chain to decide to what WAN that connection should be routed, so, after that, that connection will have a mark, and...
by inquiery
Wed Jun 22, 2016 3:34 am
Forum: General
Topic: Dynamic items unchangeable - why?
Replies: 44
Views: 14090

Re: Dynamic items unchangeable - why?

So, I was using 6.30.2 and I had a simple script that would add dynamic address-list entries. I added them dynamic so they wouldn't persist on reboot.

How can I had non persistent entries now? On Queues, Address-list, etc.?
by inquiery
Sun Jun 19, 2016 7:16 pm
Forum: Beginner Basics
Topic: Jump seems not to capture all packets it should
Replies: 2
Views: 1171

Jump seems not to capture all packets it should

Hello folks, since reading wiki and searching a bit about it I couldn't solve that "problem", I'll ask the community in hope someone shed some light on it. I have a mangle with about a hundred rules. I have a PPPoE client running, for internet access along with other 2 links with fixed IP....
by inquiery
Tue Jun 07, 2016 10:56 pm
Forum: Beginner Basics
Topic: Configure Porta-based VLAN on CCR1009
Replies: 1
Views: 873

Configure Porta-based VLAN on CCR1009

Hello, I have a CCR1009, and it have a group of 4 ports (ether1 to ether4) in a switch chip. I want configure that four ports in a switch but I want all ports (ether2, ether3 and ether4) to forward traffic to ether1, and ether1 to forward traffic to ether2, ether3 and ether4. I want that ports ether...
by inquiery
Thu Jul 30, 2015 6:10 am
Forum: The Dude
Topic: Unstable ping on ONLY one device
Replies: 0
Views: 1364

Unstable ping on ONLY one device

Hello, I have installed The Dude on my PC (Windows 7 Pro 64bits), and I configured the server to run as a service. All is "praticaly" working well. I have added my devices and a ping probe on all of them. All of them responde normaly, except one of them, that is a Rocket M5 (firmware versi...
by inquiery
Mon May 18, 2015 7:55 am
Forum: Beginner Basics
Topic: Problem with mangle rule for UDP port 53 (DNS)
Replies: 4
Views: 4644

Re: Problem with mangle rule for UDP port 53 (DNS)

I've reviewing the rules and refining them. I've already checked not to create a loop and redirect Unbound requests back to itself, I did it by IP address, like "src-address=!10.2.2.3" (10.2.2.3 is the address of unbound server). Now it is working, and I think I know why it wasn't... I als...
by inquiery
Mon May 18, 2015 6:10 am
Forum: Beginner Basics
Topic: Problem with mangle rule for UDP port 53 (DNS)
Replies: 4
Views: 4644

Re: Problem with mangle rule for UDP port 53 (DNS)

Yes, I had another rule in the prerouting chain already marking dns connections. I thought that DNS queries destined to RouterOS address wouldn't go to prerouting chain, I thought that they would role in input chain only, so I thought I needed 2 rules, one in prerouting for DNS queries on external D...
by inquiery
Mon May 18, 2015 2:56 am
Forum: Beginner Basics
Topic: Problem with mangle rule for UDP port 53 (DNS)
Replies: 4
Views: 4644

Problem with mangle rule for UDP port 53 (DNS)

Hello guys, I'm a bit confused with somehitng. I've been trying to redirect DNS requests to another host, and among my mangle rules, I added a new one, like this: /ip firewall mangle add chain=input protocol=udp dst-port=53 connection-mark=no-mark action=mark-connection new-connection-mark=DNS The i...
by inquiery
Wed Apr 01, 2015 4:14 am
Forum: Beginner Basics
Topic: Time-base limitations on user-manage profile
Replies: 0
Views: 552

Time-base limitations on user-manage profile

If I have a pppoe server using radius to authenticate, and I create a profile and add 2 limitations to it, one limitation of 1mbps and another of 2mbps, and set the 1mbps limitation to work from 00:00 till 12:00 and the 2mbps limitation to work from 12:01 to 23:59:59, does ROS will chance it's queue...
by inquiery
Fri Mar 27, 2015 3:24 am
Forum: Beginner Basics
Topic: User-manager as cetnral Radius server
Replies: 1
Views: 1002

User-manager as cetnral Radius server

Hello everybody. If I want to use User-manager as a central Radius central, for some remote NASs (all mikrotik devices), would it be recommended to put RouterOS on a PC dedicated to that service? Or would it be better to buy a CCR? I could, for example, use a virtualized RouterOS on a server that al...
by inquiery
Mon Mar 23, 2015 11:11 pm
Forum: Beginner Basics
Topic: Is it possible to communicate PPPoE to an IPv4 network, when they are in the same subnet?
Replies: 9
Views: 3995

Re: Is it possible to communicate PPPoE to an IPv4 network, when they are in the same subnet?

And finally I understand what the hell that proxy-arp does :)
Till now I was facing it as some kind of devil's only configuration not meant for humans to mess with it's supernatural ability.
by inquiery
Mon Mar 23, 2015 8:03 pm
Forum: Beginner Basics
Topic: Beginner question - NVR access to the network ISP
Replies: 5
Views: 1915

Re: Beginner question - NVR access to the network ISP

Just be sure that the interface where your NVR is connected also have an IP addres in the same network as the NVR, like 10.10.10.1/24 (considering the NVR is also /24 or 255.255.255.0). If you have it, then you already should be able to reach your NVR from any LAN computer, considering your mikrotik...
by inquiery
Mon Mar 23, 2015 4:21 pm
Forum: Beginner Basics
Topic: Access pptp client into local
Replies: 2
Views: 915

Re: Access pptp client into local

Your LAN users are connected directly to your gateway?
Your VPN are connected to your mikrotik?
And you also have your mikrotik connected to your gateway through another network?
by inquiery
Mon Mar 23, 2015 2:25 pm
Forum: Beginner Basics
Topic: Is it possible to communicate PPPoE to an IPv4 network, when they are in the same subnet?
Replies: 9
Views: 3995

Re: Is it possible to communicate PPPoE to an IPv4 network, when they are in the same subnet?

Hmm, maybe we need the help of some more experienced ROS user then. It's not the normal behavier not to let you forward traffic from one network to another. If IP Forward is enabled, traffic from any subnet will e forwarded to any known subnet to mikrotik, and if destination is not any known subnet,...
by inquiery
Mon Mar 23, 2015 2:15 pm
Forum: Beginner Basics
Topic: QUIC problem when routing UDP packets
Replies: 1
Views: 2914

Re: QUIC problem when routing UDP packets

Ok. I found a solution. I had a mangle rule to mark connections in UDP protocol, and later on I mark that connection with specific routing mark, like: chain=prerouting action=mark-connection new-connection-mark=LAN->WAN-UDP passthrough=yes protocol=udp dst-address-type=!local src-address-list=addrli...
by inquiery
Mon Mar 23, 2015 5:03 am
Forum: Beginner Basics
Topic: Is it possible to communicate PPPoE to an IPv4 network, when they are in the same subnet?
Replies: 9
Views: 3995

Re: Is it possible to communicate PPPoE to an IPv4 network, when they are in the same subnet?

PPPoE interfaces will never be in "the same subnet". PPPoE is a point-to-point tunnel that uses 2 IP addresses for "identification", they don't even have a netmask, or if they have you can think of their netmask as /32. What you would have to do is to forward traffic from PPPoE i...
by inquiery
Mon Mar 23, 2015 4:56 am
Forum: Beginner Basics
Topic: QUIC problem when routing UDP packets
Replies: 1
Views: 2914

QUIC problem when routing UDP packets

Hello, So, I have 2 links on a routerboard and I configured a load balanced with static rulesets to route traffic from clients based on address lists. I don't use PCC, nor any round robin algorithm. Also, I send all UDP traffic that is not on port 53 to a specific link, that is different from the li...
by inquiery
Fri Mar 20, 2015 3:39 pm
Forum: Beginner Basics
Topic: Stupid questiion about DST-NAT
Replies: 5
Views: 1726

Re: Stupid questiion about DST-NAT

You could also add, on your mikrotik, an static DNS entry to poing lets say "yoursite.com" to the IP address of you rmikrotik.

If you use your ROS as your DNS server inside your wifi, then you woudln't need to be routed to it.
by inquiery
Fri Mar 20, 2015 2:15 pm
Forum: Beginner Basics
Topic: [HELP] PPTP Client PCC LoadBalancing
Replies: 4
Views: 2738

Re: [HELP] PPTP Client PCC LoadBalancing

Well, than you have two PPTP Cliente interfaces, let's call them "pptp-out1" and "pptp-out2". Lets ignore the first lines for assigning IPs for your LAN and WAN, since you have that already set up. So, you'll have to addapt some rules from that example, like: These first 2 rules ...
by inquiery
Thu Mar 19, 2015 2:56 pm
Forum: Beginner Basics
Topic: [HELP] PPTP Client PCC LoadBalancing
Replies: 4
Views: 2738

Re: [HELP] PPTP Client PCC LoadBalancing

Also, there seems to be something wrong with your WAN address 0 192.168.0.10/24 192.169.169.0 ether1 (WAN Network) You must have tryed to edit the text after you coped from ros terminal. that network 192.169.169.0 can't be there since you specified 192.168.0.10/24 as address. The network value shoul...
by inquiery
Thu Mar 19, 2015 2:52 pm
Forum: Beginner Basics
Topic: [HELP] PPTP Client PCC LoadBalancing
Replies: 4
Views: 2738

Re: [HELP] PPTP Client PCC LoadBalancing

What is it that you want to achieve? Normaly, you would use Load Balance to manage traffic between 2 or more WAN links. If you have only one WAN, what is it you want to balance? You want traffic that somehow comes from the internet (your WAN link) to your RB to be balanced between 2 servers (servers...
by inquiery
Thu Mar 19, 2015 4:18 am
Forum: Beginner Basics
Topic: Load Balance
Replies: 0
Views: 771

Load Balance

Hi again guys, I've configured a load balance, using the idea of an guide I downloaded in this forum, from Tomas Kirnak. The difference is that I'm not using PCC. I just have client IPs added to 3 different address lists, and I load balance them staticaly among the 3 links I have. In the begining of...
by inquiery
Wed Mar 18, 2015 9:35 pm
Forum: Beginner Basics
Topic: PPTP over active PPPoE
Replies: 1
Views: 1026

Re: PPTP over active PPPoE

It worked now. Turns out, that between the device marked as "Router" in my schematic (that was actually an ubiquiti radio configured to connected with pppoe) was behind another old internal router and I forgot about it. I just opened it's configuration and marked the options for PPP as ima...
by inquiery
Wed Mar 18, 2015 3:02 pm
Forum: Beginner Basics
Topic: PPTP over active PPPoE
Replies: 1
Views: 1026

PPTP over active PPPoE

Hello, Let's try some more questions, for those who would be willing to answer :) I have a running pppoe server on a mikrotik device, using user-manager to authenticate users. It's all working well. Now... is it possible to run a PPTP tunnel from my PC, to that same mikrotik device, over that PPPoE ...
by inquiery
Sat Mar 14, 2015 3:58 pm
Forum: Beginner Basics
Topic: Help communication clients in both interfaces
Replies: 11
Views: 3193

Re: Help communication clients in both interfaces

If you have a NAT rule to masquerade traffic going from your LAN to your WAN, you could also want to add a rule on your NAT table, before the masquerade, so that when the traffic is not meant to go out to internet, it won't masquerade internal traffic. Like: /ip firewall nat add dst-address=192.168....
by inquiery
Sat Mar 14, 2015 3:47 pm
Forum: Beginner Basics
Topic: Help communication clients in both interfaces
Replies: 11
Views: 3193

Re: Help communication clients in both interfaces

Then I think you just need to configure the routes from one network to another on both your mikrotik and your WAN router. On your WAN router, you have to find where you can configure "Static Routes", and then add one to route traffic meant to destination 197.2.1.0/24 to use the gateway 192...
by inquiery
Sat Mar 14, 2015 2:29 pm
Forum: Beginner Basics
Topic: Help communication clients in both interfaces
Replies: 11
Views: 3193

Re: Help communication clients in both interfaces

Is your topology like this picture?
If not, try to draw it out to make it possible for us to understand and try to give a solution.
topology.jpg
by inquiery
Sat Mar 14, 2015 1:59 pm
Forum: Beginner Basics
Topic: How to connect two ADSL router to my RouterBoard ?
Replies: 6
Views: 2028

Re: How to connect two ADSL router to my RouterBoard ?

On your SOHO routers you have local networks connected? You must want to connect them to internet, and so you have another device on that scenario providing you with internet access? Or you have internet access already on one or both routers? You wrote "have a landing page for users". That...
by inquiery
Sat Mar 14, 2015 1:37 pm
Forum: Beginner Basics
Topic: PPPoE server profile rate limit, I don´t know what is exactly all numbers: 256K/3072K 300K/3200K 256K/3072K 2 8 0
Replies: 3
Views: 4121

Re: PPPoE server profile rate limit, I don´t know what is exactly all numbers: 256K/3072K 300K/3200K 256K/3072K 2 8 0

Hello, let me try to explain a bit. You have 3 pairs of rates, separated by a "/". The first pair, 256K/3072K, is your normal rx-rate (256K) and tx-rate (3072K). The second pair is meant to be your burst rate, and as the first pair, it's expressed in rx-rate/tx-rate. The third pair is your...
by inquiery
Fri Mar 13, 2015 10:22 pm
Forum: Beginner Basics
Topic: RouterOs 6.25: how to manage 2 different ADSL
Replies: 13
Views: 3664

Re: RouterOs 6.25: how to manage 2 different ADSL

Thanks ZeroByte, that was helpful. I will also look for some more material to understand chains a little better, to understand the traffic flow in a more logical way. I actually will come up with another scenario, for the same problem with 2 diferent lines, but this time, they use same remote ip add...
by inquiery
Fri Mar 13, 2015 7:18 pm
Forum: Beginner Basics
Topic: RouterOs 6.25: how to manage 2 different ADSL
Replies: 13
Views: 3664

Re: RouterOs 6.25: how to manage 2 different ADSL

Hmm, I find it very hard to understand that traffic flow. When you say that all packets have to traverse the selection criteria, you mean that they would have to go through all the rules in mangle? Wouldn't that be true in the example on wiki for PCC? When I look to that chart of traffic flow, I can...
by inquiery
Thu Mar 12, 2015 9:30 pm
Forum: Beginner Basics
Topic: Problem connecting to internet
Replies: 4
Views: 1417

Re: Problem connecting to internet

Sorry if I am silly, but have you added a NAT rule ? Like
/ip firewall nat add out-interface=ether5 action=masquerade

and also a default route like

/ip route add dst-address=0.0.0.0/0 gateway=xx.xx.x6.105
by inquiery
Thu Mar 12, 2015 9:23 pm
Forum: Beginner Basics
Topic: Help communication clients in both interfaces
Replies: 11
Views: 3193

Re: Help communication clients in both interfaces

Seems like the gateway for your mikrotik router is the same gateway as others devices on the same subnet as the WAN is. That means that your mikrotik is NOT the gateway for your internet traffic, isn't? And so, you have another router, to which devices on 192.168.1.0/24 point to as gateway, and that...
by inquiery
Wed Mar 11, 2015 7:15 pm
Forum: General
Topic: i need help please :((((( now now now
Replies: 5
Views: 1535

Re: i need help please :((((( now now now

Can't be done.

Explain your scenario in more details, and maybe someone can come up with a solution that better fits your goal.
by inquiery
Wed Mar 11, 2015 2:37 pm
Forum: Beginner Basics
Topic: RouterOs 6.25: how to manage 2 different ADSL
Replies: 13
Views: 3664

Re: RouterOs 6.25: how to manage 2 different ADSL

Hello, I've been reading the PCC example and though I could understand the basics and the functionality, I've became a bit curious about the complexity of the rules. Firstly, couldn't I change all those mangle rules to add routing marks directly on rules related to PCC, like this: / ip firewall mang...
by inquiery
Tue Mar 10, 2015 10:15 pm
Forum: Beginner Basics
Topic: CRS125 does not route between subnets
Replies: 13
Views: 3952

Re: CRS125 does not route between subnets

I have been experiencing the same issue. I use routing mark, but only for some specific traffic (pppoe related). I have 2 subnets configured on the CRS125, but on the same port, port-13, and port-13 is the master port for ports-14..24. Lets say i have 192.168.1.0/24 on ether13 (router address is 192...
by inquiery
Mon Mar 09, 2015 10:35 am
Forum: Beginner Basics
Topic: PPPoE Client configuration
Replies: 1
Views: 991

Re: PPPoE Client configuration

Some log gererated by RouterOS: 3:38:43 pppoe,ppp,info XX: pppoe-out1: initializing... 23:38:43 pppoe,ppp,info XX: pppoe-out1: connecting... 23:38:43 pppoe,debug,packet XX: ether3: sent PADI to FF:FF:FF:FF:FF:FF 23:38:43 pppoe,debug,packet XX: session-id=0x0000 23:38:43 pppoe,debug,packet XX: host-u...
by inquiery
Mon Mar 09, 2015 10:15 am
Forum: Beginner Basics
Topic: PPPoE Client configuration
Replies: 1
Views: 991

PPPoE Client configuration

Hi, I have a CRS125-24G-1S-2HnD configured with an PPPoE server, using user-manager as radius, all is working well. I configured port 9 as master for portas 10 to 24; ports 1 to 8 have no master nor are in any bridge. What I need to do now, is to connect to my ISP, which also need to be done using P...
by inquiery
Wed Feb 18, 2015 5:13 pm
Forum: RouterBOARD hardware
Topic: CRS125-24G-1S-2HND-IN rebooting
Replies: 5
Views: 3079

Re: CRS125-24G-1S-2HND-IN rebooting

Ok. I kept trying until it finnaly booted from ethernet into Netinstall mode, and then I installed all packages from 6.27 and now it is working again. The problem is, it didn't kept my configuration, it came up clear. Even my usermanager database is gone. I had a backup, but unfortunately, it is mis...
by inquiery
Wed Feb 18, 2015 4:08 pm
Forum: RouterBOARD hardware
Topic: CRS125-24G-1S-2HND-IN rebooting
Replies: 5
Views: 3079

Re: CRS125-24G-1S-2HND-IN rebooting

Hi I'm trying to do a Netinstall. I connected a cable to ether1 directly to my PC, then I plug the energy on holding the RESET button, after some time it displays "ether boot" on the CRS125 LCD, but it is not recognized by the Netinstall utility. I configured my IP address to 10.1.1.10, an...
by inquiery
Wed Feb 18, 2015 1:13 pm
Forum: RouterBOARD hardware
Topic: CRS125-24G-1S-2HND-IN rebooting
Replies: 5
Views: 3079

Re: CRS125-24G-1S-2HND-IN rebooting

I will try that when I get home. Just one question. I have read on other posts that I should export my License before I would try to reinstal with Netinstall, or I could end up losing my license that came with the device. In the example screenshots from the instructions on the link you posted, in th...
by inquiery
Wed Feb 18, 2015 4:04 am
Forum: RouterBOARD hardware
Topic: CRS125-24G-1S-2HND-IN rebooting
Replies: 5
Views: 3079

CRS125-24G-1S-2HND-IN rebooting

Hello, I bought some time ago a CRS125-24G-1S-2HND-IN, I had a PPPoE server configured on it, with some ports configured as a switch. It was working normaly, till today, and now the routerboard won't finish the botting process. It beeps, then on its LCD, it displays "starting services" for...
by inquiery
Tue Jan 13, 2015 2:44 am
Forum: SwOS
Topic: RB260GSP ready for prime time?
Replies: 82
Views: 33333

Re: RB260GSP ready for prime time?

I recently exchanged an old RB450 on a site witha RB260GSP (the RB450 was running as a simple managed switch). The RB450 was old and was crashing (had some stewed capacitors). I have the RB260GSP connected directly to a 12v batery of 45Ah, and an intelligent battery charger. The RB260GSP reports lik...
by inquiery
Thu Oct 30, 2014 9:13 pm
Forum: General
Topic: Access PPPoE ip address over subnet
Replies: 5
Views: 1741

Re: Access PPPoE ip address over subnet

Well, I figured out why I was not being routed properly to other PPPoE addresses. Turns out it was my 2 mangle rules /ip firewall mangle add chain=prerouting scr-address-list=addrlist-g1 action=mark-routing new-routing-mark=routing-g1 /ip firewall mangle add chain=prerouting scr-address-list=addrlis...
by inquiery
Tue Oct 28, 2014 5:45 pm
Forum: General
Topic: Access PPPoE ip address over subnet
Replies: 5
Views: 1741

Re: Access PPPoE ip address over subnet

Post the output of /ip route print and /ip firewall nat print Can the PPPoE clients access internet or WAN through the CRS? From what you've written by now, it should all work properly. The 10.254.0.0/24 is from a pool used for a DHCP server (my PC gets IP from that DHCP). The 192.168.12.0/24 and 1...
by inquiery
Tue Oct 28, 2014 3:17 pm
Forum: General
Topic: Access PPPoE ip address over subnet
Replies: 5
Views: 1741

Re: Access PPPoE ip address over subnet

I guess you're not being clear enough. You are connected to the same router as the PPPoE clients? Why are you trying to masquerade your traffic when it can simply just be routed? Do the PPPoE clients have any firewall? Are the IP addresses of PPPoE clients properly visible in the status of PPPoE co...
by inquiery
Tue Oct 28, 2014 3:20 am
Forum: General
Topic: Access PPPoE ip address over subnet
Replies: 5
Views: 1741

Access PPPoE ip address over subnet

Why does everything I post gets deleted? Am I just to dumb to get the right to have a question here? I'm trying to reach PPPoE clientes on a routerboard, throught a subnet on that same routerboard. I have DHCP server on the routerboard, once I connect my PC to it I can access the routerboard. I can ...
by inquiery
Tue Oct 28, 2014 2:17 am
Forum: General
Topic: Masquerade do another network with PPPoE
Replies: 0
Views: 601

Masquerade do another network with PPPoE

Hello, I have a PPPoE server set up in a CRS125-24G. I also have a DHCP server configured, so if I plug my PC to the routerboard I have access to the routerboard, I then added that DHCP network to the NAT rules, with masquerade. What I want to do is to have access to every network on the routerboard...
by inquiery
Mon Oct 27, 2014 4:11 pm
Forum: Beginner Basics
Topic: PPPoE user with access (masquerade) to all other PPPoE addr
Replies: 0
Views: 756

PPPoE user with access (masquerade) to all other PPPoE addr

Hello, It's my first time here, I don't see anyone looking to do the same as I want to do anywher around. I'm using a CRS125-24G. I installed user-manager package on it and configured a PPPoE server. On my Limitations, I added every registry to a address list. Some Limitations have Address list fiel...