MikroTik

nabuk

Hi all, we have 6 ccr 1036-8g-2s+em doing pppoe server. All have the same issue: a lot of ghost session in pppoe server menu, they appear no running but only dynamic. The bras on customer side are on the same layer2 domain so a customer is really connected on one bras but is "ghost" on oth...

nabuk

Hi all, i need to do 1:1 nat between 8000 private ip address and 8000 public ip address. Every time i need to know and to log 1:1 translation between private ip and public ip. Ther's a way so i can log it ? i don't need the full nat table but only the creation and the distruction of the single trans...

nabuk

Hi all, a simple question. Hi have a wireless p2p link made with AP-WDS and station-wds setup, the link works ok. Each unit have a bridge interface with ether1 and wlan1 on it. On that bridge we have an ip address to manage the unit. Now, we need to use the p2p link in another network within all man...

nabuk

no one can help ?

nabuk

Tried this configuration but i've a strange thing.For example a customer from address list "internet_1500_384_196" shoud have a download speed of 1,5Mbit but it can go at only 100-200kbit. If i disable queue tree the download is fine. I can't fine the error, any idea ? Here is an export /i...

nabuk

Chupaka, du you suggest to use in queue tree: for upload.......Parent=global-out packet-mark=packet_1_UPLOAD for download......Parent=global-out packet-mark=packet_1_DOWNLOAD it's right ? in the mangle i do only a connection marking is it right or i need two rule also for this ? Another question, if...

nabuk

Hi all, we have a router with 3 ethernet interface, eth1, eth2, eth3. Eth1 is the public interface connected on internet eth2 and eth3 have some internet traffic of customer with public ip and other router. Ther're also a lot of eoip tunnel and vpls tunnel over that we do pppoe-server. So we have a ...

nabuk

On the site i read: Current 3.24 is recommended for the PowerRouter 732 DO NOT UPGRADE ABOVE 3.25! You could loose all IP connectivity. Mikrotik has confirmed this to be an issue. On the router i've more then 70mbps of traffic, and it was at 100km from my office....i must be safe about upgrading to ...

nabuk

Hi all,
can i use mikrotik 3.30 on a powerouter 732 or it have some problem ?
On powerouter website, they suggest to use 3.24 no new version.

Thanks

nabuk

Sorry

pyramid is only the brand, it's a X86 server based on intel cpu. The loss is.......packet loss on the ethernet link.

nabuk

Hi all, i've two router, one RB1000 and one pyramid server, connected via gigabit ethernet. Traffic was about 40Mbps in one side and 26Mbps in the other side, about 5000-6000pps. On the link we have some packet loss, some time up to 1%. Change router, cable, ethernet card without success. Mikrotik s...

nabuk

Hi all, how can i chart the numbers of concurrent pppoe clients connected to a mikrotik server ?

nabuk

Hi all, I've some RB connected via wireless with WDS link. The first RB is connected to a pppoe server that will have pppoe service on vlanid_2 Now i need to have a full bridged network accross i can transport some vlan (id_2 for pppoe, id_X for other service, etc, etc,). I've this problem: On some ...

nabuk

Hi all,
we have several ap with 10mhz channel bandwidht. On the ap we have a lot of customer, now we need to change the channel to 20mhz. Ther's a way to mass modify all the customer without telnet or ssh each of them ?

Thanks

nabuk

Hello,
i'm looking for an hardware for routeros to support an upstream bgp provider and pppoe server with about 300 customer.
I can't use normal 1U sever because i need to install the server in a 40cm deep rack. Any solutions ? I need it in 3-4 days, from europe.

thanks

nabuk

Hi normis,
nothing to do. Resize the windows doesn't help

nabuk

Hello, on macos X 10.5, rc3 have some problem on ssh/telnet terminal: MMM MMM III KKK KKK RRRRRR OOO OOO TTT III KKK KKK MMM MMM III KKK KKK RRR RRR OOOOOO TTT III KKK KKK MikroTik RouterOS 3.0rc13 (c) 1999-2007 http://www.mikrotik.com/ [test@ro_ruf] > .. (line 1 column 1).ient-tx-limit=0 hide-ssid=...

nabuk

We use radius, no problem for other server with same radius....
What're pppoe ghost ?

nabuk

Thanks !

Also, do you know how can i monitor how many ip address mikrotik is using ? Ripe want some graphs

nabuk

amd 2ghz, 512mb ram

nabuk

Anyone have some pppoe server crash with 350-400 online users ?
One of our server, will crash every one or two day....
Other server with less then 300 customer works fine.
Server was L5.
Any idea ?

nabuk

Hi all,
i need to graph the numbers of current pppoe users on our server, anyone know as do it ?

nabuk

Ok,
i'll try it. About pppoe over eoip tunnel, 1480 or lover mtu ?

nabuk

Hi, definitively, what's the right ppppoe configuration for mikrotik with a bridge made by ethernet end eoip interface where customer do pppoe ? At the moment I've understand that mikrotik have some bug in mtu/mru/mss settings, and some custmer can browse without problem, but some others have proble...

nabuk

Here we have a lot of motorola canopy system that causes packet loss also with very good signal (-62dbm). Enabling nstreme with polling or using something like osbridge polling protocol will solve this issue. But on a 40 metres antenna tower is very difficult to have a celeron :), and rb532 have ver...

nabuk

anyone ?

nabuk

Hi all, we are testing a rb532 in ap-bridge mode, with wpa2, nstreme, polling. Framer policy was exact-size. Clients are some rb112. Latency between the devices is about 20-24ms. Will putting a pc insted of a rb532 bring the latency to 4-5ms ? If we disable the nstreme obtain 2-3ms ping. I think tha...

nabuk

It was discussed many time, but finally what's the best configuration for pppoe over wireless ? Also, with a lot of base unit connected to a pppoe server via eoip tunnels.

nabuk

Hi all, what'are the best condifurations for a mikrotik pppoe server ? Now we have a standard configuration with mtu/mru=1480 anche change tcp mss=yes But some customer have upload problem and strange problem over some special sites like a back office of sony and some other sites. The network is all...

nabuk

Hi all,
will a single RB532 handle this configuration ?

Dual radio AP, with nstreme enabled. No more then 25 client for radio
Hotspot with mac address autentication
OSPF between RB532 and backbone

Thanks to all

nabuk

Hi all, someone have tested the real performance of an access point made using RB532 (dual sector with R52) or a personal computer (dual or more secoter with R52), configurated with nstreme and polling. 5Ghz band. Cpe will be RB112 and the new RB133. How many clients can i connect to a RB532 and a p...

nabuk

Hello, i need to power two RB532 with a solar panel.
Someone have done it ?
What solar panel and battery should i use ?

Each RB532 have two cm9 card.

Thanks to all

nabuk

Downgradated to 2.9.28, we can't use 2.9.30 neither for 20sec if framed route doesn't work.

also, i've sent many mail about ospf routing filter problem, and no reply from you. Any news ?

nabuk

We have routing filter that doesn't work..........more then 600 /32 route not filtered !!

Also 2.9.30 will ignore framed-route radius attribute

nabuk

Done, but no reply at the moment

nabuk

After upgrade to 2.9.30 no route was installed via framed-route radius attribute. Downgrading to 2.9.28 will solve the problem.

Anyone with the some problem ?

nabuk · Upgradated to 2.9.30, routing filter for ospf-out doesn't still work !!!

Upgradated to 2.9.30, routing filter for ospf-out doesn't still work !!!

nabuk · Upgradated to 2.9.30, routing filter for ospf-out doesn't still work !!!

Upgradated to 2.9.30, routing filter for ospf-out doesn't still work !!!

nabuk

Some mail sent to support, but no reply at the moment....

nabuk

After upgrade, no routing filter will be apply, any idea ?

nabuk

Only one question:
on 2.10 we will have a really stable dynamic routing support (ospf and bgp), and a very stable router ?
From 2.9 first release there are too much upgrade. Every time I must do an upgrade to a production router I have fear....

nabuk

Eric, I want filter on pppoe-server. It add a /32 route for every customer, and i want block the re-distribution of thoose /32 subnet. # feb/24/2006 20:47:59 by RouterOS 2.9.12 # software id = 9UAC-3TT # / routing filter add chain=ospf-out prefix=0.0.0.0/0 prefix-length=32 action=discard comment=&qu...

nabuk

Thanks, but it doesn't work. Must I enable filter somewere in ospf settings ?

nabuk

Hi, I want configure some routing filter to stop /32 subnet re-distributing in ospf. But mikrotik seem to ignore my filter: prefix=x.x.x.x/32 prefix-lenght=32 action=reject chain=ospf-out Any idea ? Also, how can i stop the re-distribution of subnet smaller that /30 or /29 ? Thanks to all Mikrotik w...

nabuk

[Off Topic]
Cuccio, ho necessità di scriverti in privato, mi passi una tua email ?

Ciao

nabuk

Here is the latest mail that I've received from support: Also I looked at this Airaya, but there are no detailed info on this 40mhz channel and ETSI. In the Atheros driver none of the ETSI countries supports Turbo mode, so currently we haven't got enough information to make such changes. Also these ...

nabuk

Hi all!!
I'm trying to use the multipath routing with MT but when i try to use VoIP, after a few second VoIP connection fall down.
Does anyone help me?
How to use multipath routing without lose VoIP functionality??

Tnx

Search found 47 matches

Ghost pppoe session on ccr 1036

Question about nat 1:1 of about 8000 ip address

Management vlan on p2p wds wireless link

Re: Pppoe PCQ help for eoip and tunnel interfaces

Re: Pppoe PCQ help for eoip and tunnel interfaces

Re: Pppoe PCQ help for eoip and tunnel interfaces

Pppoe PCQ help for eoip and tunnel interfaces

Re: Mikrotik 3.30 on powerouter 732 ?

Mikrotik 3.30 on powerouter 732 ?

Re: Packet loss on medium traffic load ethernet interface

Packet loss on medium traffic load ethernet interface

Chart the number of pppoe session

Vlan tagging and transport over bridge

Modify band on a lof of customer

1U small deep hardware for bgp and 300 pppoe connection

Re: Terminal problem on RC

Terminal problem on RC

2.9.34-39 pppoe server will crash on about 350-400 users ?

MRTG pppoe interface numbers

STEN, what about final pppoe configuration ?

Latency on multipoint nstreme with routerboard and with a pc

pppoe, mest mtu,mru tcp mss settings ?

RB532 dual radio + hotspot + nstreme + ospf

Ntreme access point with RB532 or PC

Routerboard and solar panel

2.9.30, framed-route via radius was ignored

routing filter doesn't work on 2.9.28 and 2.9.29

Ospf routing filer how to ?

Multipath routing