Community discussions

Search found 51 matches

by b1863515
Thu Nov 26, 2015 7:54 pm
Forum: Beginner Basics
Topic: Wireless Bridge
Replies: 8
Views: 2510

Re: Wireless Bridge

I guess that you'll get similar errors because bridging a wireless interface used as a station is kinda non-standard. You might be better off using dst-nat.
by b1863515
Fri Oct 30, 2015 10:12 pm
Forum: Beginner Basics
Topic: RouterBOOT booter - is it part of x86 version of ROS?
Replies: 2
Views: 435

Re: RouterBOOT booter - is it part of x86 version of ROS?

No, on x86 BIOS loads ROS. On embeded platforms (like RouterBoard) there's no such thing as BIOS - they use specialized bootloaders (e.g. Das U-Boot or RouterBOOT).
Thanks man :)
by b1863515
Fri Oct 30, 2015 9:24 pm
Forum: Beginner Basics
Topic: RouterBOOT booter - is it part of x86 version of ROS?
Replies: 2
Views: 435

RouterBOOT booter - is it part of x86 version of ROS?

Hi,

is the RouterBOOT booter present in the x86 version of RouterOS or is it a part of RouterBOARD devices only?

http://wiki.mikrotik.com/wiki/Manual:RouterBOOT

Thx
by b1863515
Mon Oct 26, 2015 8:47 pm
Forum: Beginner Basics
Topic: What does HT stand for?
Replies: 2
Views: 852

Re: What does HT stand for?

This abbreviation came from "High Throughput", it's part of 802.11n standard. To learn more check that document: http://airmagnet.flukenetworks.com/asse ... Primer.pdf
Thank you!
by b1863515
Sun Oct 25, 2015 7:56 pm
Forum: Beginner Basics
Topic: What does HT stand for?
Replies: 2
Views: 852

What does HT stand for?

Hi

could somebody tell me what does "HT" from wireless interface settings stand for?

Thanks :D

Image
by b1863515
Thu Oct 08, 2015 8:12 pm
Forum: Beginner Basics
Topic: MTCNA - IPv6
Replies: 4
Views: 703

Re: MTCNA - IPv6

Thank you!!! :D
by b1863515
Wed Oct 07, 2015 6:15 pm
Forum: Beginner Basics
Topic: MTCNA - IPv6
Replies: 4
Views: 703

MTCNA - IPv6

Hi all

is IPv6 part of the MTCNA test/certificate?

Thanks =)
by b1863515
Thu Sep 10, 2015 7:55 pm
Forum: General
Topic: MTCNA - a good understanding of TCP/IP
Replies: 6
Views: 910

Re: MTCNA - a good understanding of TCP/IP

Ok. Thanks, guys!
by b1863515
Wed Sep 09, 2015 8:17 pm
Forum: General
Topic: MTCNA - a good understanding of TCP/IP
Replies: 6
Views: 910

MTCNA - a good understanding of TCP/IP

Hi, I'm thinking about getting the MTCNA certificate. The outline says I must have "a good understanding of TCP/IP and subnetting". My question is if the stuff about TCP/IP and subnetting in books like https://books.google.com/books?id=KuMnnQEACAAJ (CompTIA Network+ by Michael Meyers) or https://boo...
by b1863515
Sun Sep 06, 2015 3:16 pm
Forum: General
Topic: MikroTik Advanced User = MTCNA ?
Replies: 2
Views: 612

Re: MikroTik Advanced User = MTCNA ?

MikroTik Advanced User certificate is the same as MikroTik certified MTCNA certificate? MTCNA is Mikrotik Certified Network Associate. This is the base Mikrotik Certificate that's required before you undertake other Mikrotik certifications. http://www.mikrotik.com/pdf/MTCNA_Outline.pdf After this c...
by b1863515
Sat Sep 05, 2015 10:14 pm
Forum: General
Topic: MikroTik Advanced User = MTCNA ?
Replies: 2
Views: 612

MikroTik Advanced User = MTCNA ?

Hi,

MikroTik Advanced User certificate is the same as MikroTik certified MTCNA certificate?

Thanks =)
by b1863515
Mon Aug 24, 2015 9:15 pm
Forum: Beginner Basics
Topic: IPTV multicast question - "switch mode" for 2 ports
Replies: 2
Views: 1020

Re: IPTV multicast question - "switch mode" for 2 ports

I'm guessing here, but I'd say it is possible. I assume both hEX and hEX lite have a switch chip for ethers2-5, so you could set let's say ether4 and ether5 as a switch. plug your internet connection to ether5, iptv box to ether4, assign an IP address to the master-port of the switch (manually, dhcp...
by b1863515
Fri Aug 21, 2015 5:10 pm
Forum: Beginner Basics
Topic: Bridged lan port 3-4, port 1,5 WAN
Replies: 3
Views: 664

Re: Bridged lan port 3-4, port 1,5 WAN

It seems that the ether5 is disabled.

Could you post here IP -> Address ?
by b1863515
Mon Aug 17, 2015 7:56 pm
Forum: Beginner Basics
Topic: Two networks as one with MikroTik behind a second router.
Replies: 5
Views: 1771

Re: Two networks as one with MikroTik behind a second router.

Have you tried to use the MikroTik as a bridge? (devices connected to MikroTik would get IP addresses from the DHCP server on D-Link) No, I didn't, althouth this may be an option. Thing is, if there's a manual of some hints on how to do that correctly I would appreciate! Hi, you didn't mention whic...
by b1863515
Fri Aug 14, 2015 6:08 pm
Forum: Beginner Basics
Topic: Two networks as one with MikroTik behind a second router.
Replies: 5
Views: 1771

Re: Two networks as one with MikroTik behind a second router.

Have you tried to use the MikroTik as a bridge? (devices connected to MikroTik would get IP addresses from the DHCP server on D-Link)
by b1863515
Fri Jul 31, 2015 2:18 pm
Forum: Beginner Basics
Topic: Second router help
Replies: 12
Views: 1083

Re: Second router help

Hi, that's the routing table of the router you call " mikrotik " in your diagram Hi, 0 A S dst-address=0.0.0.0/0 gateway=192.168.1.1 gateway-status=192.168.1.1 reachable via ether2 distance=1 scope=30 target-scope=10 routing-mark=1_icmp 1 A S dst-address=10.1.0.0/16 gateway=ether3 gateway-status=eth...
by b1863515
Thu Jul 30, 2015 4:37 pm
Forum: Beginner Basics
Topic: Second router help
Replies: 12
Views: 1083

Re: Second router help

Hi, here's my config ICMP traffic gets marked on mikrotik and goes to talk talk router which sends it to the internet. I can ping talk talk from 10.1.0.0/16 subnet. ether1 always leads to the internet. mikrotik # ADDRESS NETWORK INTERFACE 0 D 172.16.4.249/24 172.16.4.0 ether1 1 10.1.0.1/16 10.1.0.0 ...
by b1863515
Thu Jul 30, 2015 1:21 pm
Forum: Beginner Basics
Topic: How to setup DHCP?
Replies: 2
Views: 417

Re: How to setup DHCP?

Is it legit to assign a DHCP server to an interface that (according to the names of the interfaces) is a slave of an interface which already has a DHCP server?
by b1863515
Mon Jul 27, 2015 9:53 pm
Forum: Beginner Basics
Topic: CRS with a main LAN and NATted VLANs
Replies: 2
Views: 462

Re: CRS with a main LAN and NATted VLANs

action=masquerade
with a VLAN interface as the out-interface?
by b1863515
Mon Jul 27, 2015 6:53 pm
Forum: Virtualization
Topic: Cloud Hosted Router
Replies: 583
Views: 189617

Re: Cloud Hosted Router

Can't connect with winbox. http://deem.ru/temp/2015-07-27%2015-16-59_RouterOS_WinBox_Error.png That is most likely a VM software config issue. Depends on how you set up your virtual NIC and how it is connected to the host PC. VirtualBox has NAT by default, configure it to use Bridge or reconfigure ...
by b1863515
Mon Jul 27, 2015 1:21 pm
Forum: Beginner Basics
Topic: Basic routing configuration
Replies: 5
Views: 734

Re: Basic routing configuration

You could try to plug in a different device instead of the server, e.g. a laptop with a disabled firewall or another router with no firewall rules and assign the 89.25.173.226/27 address + 89.25.173.225 gateway to it in order to narrow down the number of potential causes.
by b1863515
Fri Jul 24, 2015 7:19 pm
Forum: Beginner Basics
Topic: Basic routing configuration
Replies: 5
Views: 734

Re: Basic routing configuration

Can you ping 89.25.173.225 from the server?
by b1863515
Thu Jul 23, 2015 2:20 pm
Forum: Beginner Basics
Topic: Troubleshooting basic office router setup
Replies: 4
Views: 753

Re: Troubleshooting basic office router setup

Hi, maybe you could try this:
vlan.PNG
You could bond sfp 3&4, 5&6.
Create a bridge and add those bonded interfaces to the bridge.
Create two VLAN interfaces on the bridge.
Assign IP adresses to the VLAN interfaces.

I can't test this config but maybe it will help you. =)
by b1863515
Mon Jul 20, 2015 4:56 pm
Forum: Beginner Basics
Topic: How to block communication between VLANs
Replies: 1
Views: 972

How to block communication between VLANs

trunk-block.PNG Hi, I want to enable access to the internet from both VLANs and block communication between VLAN 1 and VLAN 2. I've managed to achieve that by firewall rules: 1 chain=forward action=drop in-interface=vlan1 out-interface=!Eth1-gateway log=no log-prefix="" 2 chain=forward action=drop ...
by b1863515
Sat Jun 20, 2015 8:31 pm
Forum: Beginner Basics
Topic: RB951-2n VLANs using Switchport
Replies: 0
Views: 807

RB951-2n VLANs using Switchport

Hi, I've managed to create two VLANs on my RB951-2n - computers attached to ethers 2 and 3 can't communicate with computers attached to ethers 4 and 5 which is exactly what I want. vlan.jpg I'd like to know if I can make the VLANs communicate with ether1-gateway so they can get access to the interne...
by b1863515
Tue Jan 13, 2015 2:23 pm
Forum: Beginner Basics
Topic: Routing Question
Replies: 2
Views: 709

Re: Routing Question

Did it work?
by b1863515
Mon Jan 12, 2015 9:50 pm
Forum: Beginner Basics
Topic: Routing Question
Replies: 2
Views: 709

Re: Routing Question

Try this
ip route add gateway=192.168.2.2
ip firewall nat add chain=srcnat action=masquerade out-interface=ETH1
The first line adds a default gateway.
The second line creates NAT.

If you paste the code in WinBox terminal window, you'll have to right click and choose "Paste".
by b1863515
Sat Jan 10, 2015 2:09 pm
Forum: General
Topic: New Packet flow diagram
Replies: 103
Views: 72827

Re: New Packet flow diagram

I guess you pros can understand the packet flow but I don't :(. Is there a book or a link that would explain what is actually happening in the individuals steps?
check http://wiki.mikrotik.com/wiki/Manual:Packet_Flow
Thanks!
by b1863515
Fri Jan 09, 2015 10:48 pm
Forum: General
Topic: New Packet flow diagram
Replies: 103
Views: 72827

Re: New Packet flow diagram

I guess you pros can understand the packet flow but I don't :(. Is there a book or a link that would explain what is actually happening in the individuals steps?
by b1863515
Wed Dec 31, 2014 4:33 pm
Forum: Beginner Basics
Topic: CRS125-24G-1S-RM Configuration
Replies: 4
Views: 7552

Re: CRS125-24G-1S-RM Configuration

Hi, I have RB951-2n but I think this should apply to your device as well. If you don't like Webfig, you can try WinBox http://download2.mikrotik.com/routeros/winbox/3.0beta3/winbox.exe I'm not sure, that you should set ether1 as the master port of ether1, I think that the option " none " is good eno...
by b1863515
Mon Dec 29, 2014 10:48 pm
Forum: Beginner Basics
Topic: Linux client to L2TP/IPsec in Mikrotik
Replies: 3
Views: 6764

Re: Linux client to L2TP/IPsec in Mikrotik

I'm not sure what you are asking because I'm not an IPsec expert but here are the settings that connect me to L2TP on RouterOS

Image

Image

Image
by b1863515
Mon Dec 29, 2014 10:27 pm
Forum: Beginner Basics
Topic: Automatic selection of frequency on AP
Replies: 6
Views: 1470

Re: Automatic selection of frequency on AP

You mean selecting frequency-mode: regulatory-domain and country: my_country to limit the available channels and maximum transmit power?
by b1863515
Sun Dec 28, 2014 9:16 pm
Forum: Beginner Basics
Topic: Linux client to L2TP/IPsec in Mikrotik
Replies: 3
Views: 6764

Re: Linux client to L2TP/IPsec in Mikrotik

Hi,

I managed to connect to L2TP/IPsec server on MikroTik from Ubuntu 14.04 using this:

https://launchpad.net/l2tp-ipsec-vpn
http://wiki.l2tpipsecvpn.tuxfamily.org/ ... =Main_Page
by b1863515
Sun Dec 28, 2014 4:11 pm
Forum: Beginner Basics
Topic: Simple switch and routing function
Replies: 3
Views: 822

Re: Simple switch and routing function

I tried to create something similar with private IP addresses and this layout works. The router with the Bridge even set the default route automatically - 192.168.0.0/24 Bridge reachable. I hope it will help you. ;-)

Image
by b1863515
Sun Dec 28, 2014 1:32 pm
Forum: Beginner Basics
Topic: Simple switch and routing function
Replies: 3
Views: 822

Re: Simple switch and routing function

I am new to RouterOS but how about adding the three ports on RB1200 to a bridge, then assign one of the public IP addresses to the bridge.
by b1863515
Sun Dec 28, 2014 10:41 am
Forum: Beginner Basics
Topic: Wake on LAN
Replies: 0
Views: 445

Wake on LAN

Hi,

if I can use "system -> shutdown" is it also possible to turn a router back on using for example Wake on LAN?

Thanks :D
by b1863515
Sat Dec 27, 2014 6:16 pm
Forum: Beginner Basics
Topic: Automatic selection of frequency on AP
Replies: 6
Views: 1470

Re: Automatic selection of frequency on AP

Thank you :D
by b1863515
Thu Dec 25, 2014 10:24 pm
Forum: Beginner Basics
Topic: Automatic selection of frequency on AP
Replies: 6
Views: 1470

Automatic selection of frequency on AP

Hi, I'd like to set my RB951-2n to choose the frequency automatically - the least occupied channel. I found the options: Frequency: Auto and DFS Mode . Is selecting Frequency: Auto enough for automatic selection of the least occupied channel or do I need to select something from the DFS Mode? Thank ...
by b1863515
Sun Dec 21, 2014 2:37 pm
Forum: Beginner Basics
Topic: PCQ
Replies: 0
Views: 369

PCQ

Hi all, I wanted to use PCQ to divide bandwidth eqally among 2 computers but the speed of my internet connection is not very stable. It warries from from 4 to 8 Mbs so when I set the Max limit to a low value, e.g. 1M, it works exactly as it should, the bandwith is divided exactly 50:50. But when I s...
by b1863515
Sun Dec 14, 2014 2:04 pm
Forum: Beginner Basics
Topic: Number of Chains
Replies: 2
Views: 3336

Re: Number of Chains

Thank you : )))))
by b1863515
Sat Dec 13, 2014 7:21 pm
Forum: Beginner Basics
Topic: Number of Chains
Replies: 2
Views: 3336

Number of Chains

Hi all,

what does "Number of Chains" mean? I know that some Routerboards have single, dual or triple chain but I can't find what it actually means.

Thanks :D
by b1863515
Fri Dec 12, 2014 9:21 pm
Forum: Beginner Basics
Topic: Upgrade from v5 to v6
Replies: 2
Views: 620

Re: Upgrade from v5 to v6

Thank you!
by b1863515
Fri Dec 12, 2014 8:41 pm
Forum: Beginner Basics
Topic: Upgrade from v5 to v6
Replies: 2
Views: 620

Upgrade from v5 to v6

Hi all,

if I buy http://routerboard.com/RB951-2n with RouterOS v5 L4 can I upgrade to v6 L4? Or do I have to buy the new version of RouterOS just as if I were buying a new licence level?

Thanks :D
by b1863515
Thu Nov 27, 2014 8:24 pm
Forum: Beginner Basics
Topic: RB951Ui-2HnD - sharing a printer
Replies: 5
Views: 2840

Re: RB951Ui-2HnD - sharing a printer

Thanks for your replies :))
by b1863515
Thu Nov 27, 2014 5:48 pm
Forum: Beginner Basics
Topic: RB951Ui-2HnD - sharing a printer
Replies: 5
Views: 2840

RB951Ui-2HnD - sharing a printer

Hi,

can I connect a printer to http://routerboard.com/RB951Ui-2HnD and print from computers connected to the router?

Thank you :D
by b1863515
Sun Nov 16, 2014 4:40 pm
Forum: Beginner Basics
Topic: Mangle - Mark routing
Replies: 2
Views: 1104

Re: Mangle - Mark routing

Thanks.
by b1863515
Sat Nov 15, 2014 9:22 pm
Forum: Beginner Basics
Topic: redirect a specific device to a website.
Replies: 2
Views: 916

Re: redirect a specific device to a website.

This article is 4 years old but maybe this method still works.

http://wiki.mikrotik.com/wiki/Payment_Reminders
by b1863515
Thu Nov 13, 2014 6:21 pm
Forum: Beginner Basics
Topic: Mangle - Mark routing
Replies: 2
Views: 1104

Mangle - Mark routing

Hi, I am studying using different routing tables for different paths I have this network. If the destination address = 8.8.8.8 -> use the gateway A If the destination address = 8.8.4.4 -> use gateway B I applied the Rules from Routes and it worked. I also tried to apply the Mangle instead of the Rul...
by b1863515
Wed Nov 05, 2014 6:31 pm
Forum: Beginner Basics
Topic: Bridge settings
Replies: 10
Views: 1909

Re: Bridge settings

Kind of, I've tried it in VirtualBox using internal networking and the bridge sees the MAC addresses of the PCs but the ping still doesn't work (firewalls are off).

But thanks for your answer, jacekes. :)))
by b1863515
Sun Nov 02, 2014 10:50 pm
Forum: Beginner Basics
Topic: ipsec
Replies: 8
Views: 1597

Re: ipsec

I guess the "500" represents the number of the error.
by b1863515
Sun Nov 02, 2014 7:01 pm
Forum: Beginner Basics
Topic: Bridge settings
Replies: 10
Views: 1909

Bridge settings

Hi,

I'd like to ping the PC1 from PC2 and use the bridge. Do the ethernet cards on the pc with RouterOS need IP addresses to make the bridge work?

Thx :)

Image