Community discussions

Search found 267 matches

by hgonzale
Wed Mar 06, 2019 1:30 am
Forum: General
Topic: IPsrc - Peers - Peer1 with dinamic IP
Replies: 20
Views: 2720

IPsrc - Peers - Peer1 with dinamic IP

Hello, maybe is because I don't understand everything, but since the latest version 6.44, now I have a: Entry unreacheable in all the routers and the L2TP/IPsec is not working anymore. When somebody try to connect, I got: no auth method defined for peer. Of course, if I edit peer1 and change: local ...
by hgonzale
Sat Feb 16, 2019 7:07 pm
Forum: General
Topic: Two VLANS to another place. Voip + Data
Replies: 57
Views: 4292

Re: Two VLANS to another place. Voip + Data

Hello my friend. I am going to be many days at my friend place... How is your week this next week?
by hgonzale
Mon Jan 07, 2019 9:28 pm
Forum: General
Topic: Interface ether accidently removed and I am disconnected.
Replies: 9
Views: 637

Re: Interface ether accidently removed and I am disconnected.

Did you try using mac address?
by hgonzale
Mon Jan 07, 2019 11:41 am
Forum: General
Topic: Mikrotik behind HG8245H
Replies: 2
Views: 582

Re: Mikrotik behind HG8245H

1.- First. check if you can reach the mikrotik, for checking is the DMZ is working well.
by hgonzale
Mon Jan 07, 2019 11:39 am
Forum: General
Topic: Interface ether accidently removed and I am disconnected.
Replies: 9
Views: 637

Re: Interface ether accidently removed and I am disconnected.

Is not a failure, Mikrotik is a kind of router where YOU HAVE total control.
In other ways, normal router=windows, mikrotik=linux

If you do: rm -f / you will DELETE everything.. no trash can.... just you know what to do..
by hgonzale
Mon Jan 07, 2019 11:32 am
Forum: General
Topic: Temperature tolerance of RB2011UiAS-2HnD-IN [SOLVED]
Replies: 6
Views: 489

Re: Temperature tolerance of RB2011UiAS-2HnD-IN [SOLVED]

I have also the same like you, but maybe smaller. The 2011 for desktop with full load (the average is about 80%), many IPsec VPNs running, 300 Mbps bandwidth,, shared with about 10 apartments, and is inside this with door and closed in the back https://www.ikea.com/es/es/productos/muebles-almacenaje...
by hgonzale
Mon Jan 07, 2019 10:43 am
Forum: General
Topic: Router for traveling?
Replies: 4
Views: 556

Re: Router for traveling?

I am doing the same like you.
I have two, and it depends of my luggage allowance and the destination (poor wireless there (coverage) or other things)
I have an old 751 and a new mini AP (very small).
by hgonzale
Fri Jan 04, 2019 1:14 pm
Forum: Beginner Basics
Topic: It is possible to disable dhcp in a single ether
Replies: 3
Views: 260

Re: It is possible to disable dhcp in a single ether

Does he need the hotspot?
Or for him is enough direct connection?
by hgonzale
Thu Jan 03, 2019 10:40 pm
Forum: General
Topic: Two VLANS to another place. Voip + Data
Replies: 57
Views: 4292

Re: Two VLANS to another place. Voip + Data

The spanish is not a problem my friend. If you are going to help me, I will speak even Russian for you..... If I am receiving something, I need to make you easy as possible... Second, nice to know you can help me a little bit. You will get a recompense.. Tell me when you think you will have a little...
by hgonzale
Wed Jan 02, 2019 11:22 pm
Forum: General
Topic: Two VLANS to another place. Voip + Data
Replies: 57
Views: 4292

Re: Two VLANS to another place. Voip + Data

Ohhh sindy... Really you explain very well and you are teaching me a lot.... You will receive a present... of course!!!!! I am so gratefully with you. In other words... I was playing today a little bit at my friend's house and I didn't have luck, but was some minutes only playing I need to ask somet...
by hgonzale
Tue Jan 01, 2019 5:42 pm
Forum: Beginner Basics
Topic: Vpn
Replies: 2
Views: 366

Re: Vpn

Tell us any info about it, and is helpfully to post your config...
by hgonzale
Sun Dec 30, 2018 8:55 pm
Forum: Beginner Basics
Topic: Vpn
Replies: 2
Views: 366

Re: Vpn

Make NAT for the VPn's...
by hgonzale
Sun Dec 30, 2018 4:56 pm
Forum: General
Topic: VLANS+2 Bridges + 2 DHCP [SOLVED]
Replies: 14
Views: 1205

Re: VLANS+2 Bridges + 2 DHCP [SOLVED]

Super my friend. YES. In the main router I don't have 2 bridge, because the "friends networks" is directly in the VLAN interface. The DHCP server and the IP (192.168.12.x) is running directly in VLAN-300-eth9. Of course, in the RB493 (I the wireless is for me, and the eth ports are for friends) I cr...
by hgonzale
Sun Dec 30, 2018 12:33 pm
Forum: General
Topic: VLANS+2 Bridges + 2 DHCP [SOLVED]
Replies: 14
Views: 1205

Re: VLANS+2 Bridges + 2 DHCP [SOLVED]

Hello all my friends... First, I hope you are going to have a nice happy new year. Second, yesterday I was until 4 am reading and understanding and I think in my house I did well (you will review it now). I learn about: Add service Tag.. I was thinking is ADD the TAg, and not, is ALLOW the VLAN insi...
by hgonzale
Sun Dec 30, 2018 4:53 am
Forum: General
Topic: VLANS+2 Bridges + 2 DHCP [SOLVED]
Replies: 14
Views: 1205

Re: VLANS+2 Bridges + 2 DHCP [SOLVED]

Thank you a lot to everyone. I will make changes and try to learn a little bit more in these "holidays".
I will keep you updated!
A big hug
by hgonzale
Sat Dec 29, 2018 3:35 pm
Forum: General
Topic: Two VLANS to another place. Voip + Data
Replies: 57
Views: 4292

Re: Two VLANS to another place. Voip + Data

Hello Sindy. Good day for you. Now I am here trying to help my friend. I did the cnfiguration in the switch but not luck. Even, I am connecting the VoIP phone (tag 21) directly on the switch (port 7) and not luck. Playing now with options!!!! But really, I don´t understand very well. I will take a M...
by hgonzale
Thu Dec 27, 2018 2:37 pm
Forum: General
Topic: VLANS+2 Bridges + 2 DHCP [SOLVED]
Replies: 14
Views: 1205

VLANS+2 Bridges + 2 DHCP [SOLVED]

Hello my friend, me continuing with learning VLANs and saying THANK YOU too all my friends teaching me (you included) What is my idea/config, and this post is for correcting me, because is working, I think with little troubles (duplicated packets and sometime the dhcp giving wrong ip address). What ...
by hgonzale
Wed Dec 26, 2018 8:42 pm
Forum: General
Topic: Two VLANS to another place. Voip + Data
Replies: 57
Views: 4292

Re: Two VLANS to another place. Voip + Data

My friend sindy. I did another question some time ago, with a lan in my "house" and vlan and I am having troubles also, because I don't known well about it.
Can you send me a private and I will re open the post with the correct question.

Thank you!
by hgonzale
Wed Dec 26, 2018 8:27 pm
Forum: General
Topic: Two VLANS to another place. Voip + Data
Replies: 57
Views: 4292

Re: Two VLANS to another place. Voip + Data

Ohhhhhh thank you my friend for correcting me.
I will try the next week everything you say.

Thank you a lot!
by hgonzale
Sat Dec 22, 2018 5:06 pm
Forum: General
Topic: Two VLANS to another place. Voip + Data
Replies: 57
Views: 4292

Re: Two VLANS to another place. Voip + Data

Hello friend. I am back here and I solve something but still I am not able to get the VLAN in the other side I am sure the problem is me, because I don´t know exactly how to configure and handle the VLANs and the TAG. But first..... 1.- In the main ¨office¨ I need to create a new bridge and put VLAN...
by hgonzale
Wed Dec 19, 2018 12:31 am
Forum: General
Topic: Force hightest enc algo in IPsec
Replies: 0
Views: 225

Force hightest enc algo in IPsec

I have some VPN between some routers. The routers have available some different encryption levels because some road warriors/clients has different support but I want to join some routers together and use in this situation aes-256-gcm, but if I have other options available... they use "always cbc-aes...
by hgonzale
Sun Nov 25, 2018 12:49 am
Forum: General
Topic: Two VLANS to another place. Voip + Data
Replies: 57
Views: 4292

Re: Two VLANS to another place. Voip + Data

Yes, thank you. Even after I tried to delete some and it say I can't delete a post if there are new..
sorry
by hgonzale
Sat Nov 24, 2018 11:55 pm
Forum: General
Topic: Two VLANS to another place. Voip + Data
Replies: 57
Views: 4292

Re: Two VLANS to another place. Voip + Data

Yes my friend. Thank you for everything. I didn't finish, because no time. Really really I didn't connected the phone in the other place, but I discover a lot of.!
You are part of this!!!! Really.
by hgonzale
Sat Nov 24, 2018 9:01 pm
Forum: General
Topic: L2TP/IPSec behind NAT
Replies: 8
Views: 1061

Re: L2TP/IPSec behind NAT

Also you need to redirect the protocol ipsec-esp, is not only UDP and TCP... also you need to redirect THIS protocol
by hgonzale
Sat Nov 24, 2018 5:40 pm
Forum: General
Topic: Two VLANS to another place. Voip + Data
Replies: 57
Views: 4292

Re: Two VLANS to another place. Voip + Data

Hello friends.. I am at home I discovered the mikrotik is not the problem, is some package that is disabling the ETH in the switch, because I connected a mikrotik ETH5 with VLAN21 and DHCP client on that VLAN interface and I got IP from the VoIP network, is something on the configuration and this sw...
by hgonzale
Sat Nov 24, 2018 2:47 pm
Forum: General
Topic: Two VLANS to another place. Voip + Data
Replies: 57
Views: 4292

Re: Two VLANS to another place. Voip + Data

The last post from HERe jaja. If I plug a normal computer also the the ¨extrange¨ ports, the computer also works. The ports is not getting disabled.

What could make (security/etc) a port for getting disabled when plugging a mikrotik router.... wow...
by hgonzale
Sat Nov 24, 2018 2:08 pm
Forum: General
Topic: Two VLANS to another place. Voip + Data
Replies: 57
Views: 4292

Re: Two VLANS to another place. Voip + Data

I did a crossover wire and the port was disabled also. This is not the problem then.... Resume.. If a connect a Granstream phone with VLAN 21, priority 0, I got the IP from the voIP network on ¨Voip ports¨ from the switch (really, hybrid ports) But if I plug the mikrotik in the same port, it flash f...
by hgonzale
Sat Nov 24, 2018 1:58 pm
Forum: General
Topic: Two VLANS to another place. Voip + Data
Replies: 57
Views: 4292

Re: Two VLANS to another place. Voip + Data

I got. Is the VLAN 21. I entered in the PBX system I got a lot of info and now I configured I standar VoIP phone and getting the IP address for the voIP Movistar network: 172.24.196.0/24. Off course, I am not able to register the extension because even I know the SIP server values and login, I don´t...
by hgonzale
Sat Nov 24, 2018 12:45 pm
Forum: General
Topic: Two VLANS to another place. Voip + Data
Replies: 57
Views: 4292

Re: Two VLANS to another place. Voip + Data

I think I have this

http://support.huawei.com/enterprise/en ... oa-packets

I will try to clone the mac address
by hgonzale
Sat Nov 24, 2018 11:56 am
Forum: General
Topic: Two VLANS to another place. Voip + Data
Replies: 57
Views: 4292

Re: Two VLANS to another place. Voip + Data

Now I am having another trouble. When I connect a mikrotik to any TAGGED port on the switch. The ETH port is getting disabled.
And after is not working anymore.
I need to restart the switch.
The switch is a huawei s5720-12tp-pwr
by hgonzale
Sat Nov 24, 2018 11:34 am
Forum: General
Topic: Two VLANS to another place. Voip + Data
Replies: 57
Views: 4292

Re: Two VLANS to another place. Voip + Data

Hello mkx...
I am here, are you online? jajaja
I got the VLAN21 just for DHCP (I think so), there is a DHCP server running from the ISP on VLAN21..... but I have some more capture problems jajaja
by hgonzale
Fri Nov 23, 2018 11:55 pm
Forum: General
Topic: Two VLANS to another place. Voip + Data
Replies: 57
Views: 4292

Re: Two VLANS to another place. Voip + Data

Super super. Sorry... Is late my friend.. I will do/try tomorrow, I hope you will have good news, and EVERYBODY will know the VLAN for VoIP in Movistar Spain for "enterprise"...

Before doing everything, I will try Id=6 jajajaja
by hgonzale
Fri Nov 23, 2018 11:37 pm
Forum: General
Topic: Two VLANS to another place. Voip + Data
Replies: 57
Views: 4292

Re: Two VLANS to another place. Voip + Data

But, how can I sniff the packets on eth4 from eth3? Use /tool sniffer , set it to sniff off ether3 interface and save full packet contents. Afterwards fetch file to a PC and analyze it using wireshark. Tomorrow, you are welcome to connect to my computer. A virtual coffee I will send to you jajajaja
by hgonzale
Fri Nov 23, 2018 11:35 pm
Forum: General
Topic: Two VLANS to another place. Voip + Data
Replies: 57
Views: 4292

Re: Two VLANS to another place. Voip + Data

Super. I will download the software, but I thought the sniffer in mikrotik is not capturing this because in the manual says: Packet sniffer is a tool that can capture and analyze packets that are going to, leaving or going through the router (except the traffic that passes only through the switch ch...
by hgonzale
Fri Nov 23, 2018 10:39 pm
Forum: General
Topic: What to do with used MikroTik equipment?
Replies: 2
Views: 523

Re: What to do with used MikroTik equipment?

I am in Spain. Where are you?
Do you have some pictures?
by hgonzale
Fri Nov 23, 2018 10:34 pm
Forum: General
Topic: Two VLANS to another place. Voip + Data
Replies: 57
Views: 4292

Re: Two VLANS to another place. Voip + Data

Tomorrow I will go to my friend's house.
I have a mini MK and a 751.
The only big question is...

I will put eth2 = switch in VoIP ports (hybrid)
eth3 = voip phone
eth4 = my computer

HW off....

But, how can I sniff the packets on eth4 from eth3?

Thank youuuuuuuu
by hgonzale
Mon Nov 19, 2018 9:02 pm
Forum: General
Topic: How many VLANs do I need?
Replies: 8
Views: 644

Re: How many VLANs do I need?

Yes. Don't complicate with VLANS in this situation for example. eth2 and eth3 + wlan1 in BRIDGE-A with IP 192.168.50.x/24 and one DHCP server eth4 + virtual-wlan1 in BRIDGE-B with IP 192.168.60.x/24 and one DHCP server also even, you can give bandwidth to each bridge, PCQ queues and "play" a lot wit...
by hgonzale
Mon Nov 19, 2018 9:49 am
Forum: General
Topic: Two VLANS to another place. Voip + Data
Replies: 57
Views: 4292

Re: Two VLANS to another place. Voip + Data

Super, super. I will try to sniff the packets. Thank you a lot!!!! In Spain you have a room jajajajaja.... only tell me jajaja My assumption is that VoIP is carried over tagged VLAN from ISP's switch ... I'm pretty sure that phone number used for incoming calls is tied to phone's MAC address (or som...
by hgonzale
Sun Nov 18, 2018 10:50 pm
Forum: General
Topic: Two VLANS to another place. Voip + Data
Replies: 57
Views: 4292

Re: Two VLANS to another place. Voip + Data

And ONE stupid question. Because I don't understand anything about VLAN... Is possible for example for connect a device using VLAN (in its configuracion) pass across witch without taking out the VLAN ID in the TCP/IP heaader? Why is my "stupid question". Because if the phone has de ID=XXXXXX and I c...
by hgonzale
Sun Nov 18, 2018 10:45 pm
Forum: General
Topic: Two VLANS to another place. Voip + Data
Replies: 57
Views: 4292

Re: Two VLANS to another place. Voip + Data

1.- I am not using really a router. The mikrotik switch in the eth7 is for connection to the ISP switch, and the ubiquiti to eth8. And eth3 is also for the "same switch" but in port for "data" 2.- I am using VLAN maybe because I am not expert in VLANs... I just "want" to separe DATa and "VOIP" and d...
by hgonzale
Sun Nov 18, 2018 10:39 pm
Forum: General
Topic: Two VLANS to another place. Voip + Data
Replies: 57
Views: 4292

Re: Two VLANS to another place. Voip + Data

In this week, I don't know what day, I will go to my friend house and I will try it.

I will use a mini mikrotik 3 port. I will put 2 ports in the same bridge with HW offload and using the sniffer from the same device, is this enough?
by hgonzale
Sat Nov 17, 2018 9:52 pm
Forum: General
Topic: Two VLANS to another place. Voip + Data
Replies: 57
Views: 4292

Re: Two VLANS to another place. Voip + Data

Yes my friend. I will try to find the ID of the VLAN

I know about my signature, how can I put the image for the signature?

Thank youuuuuu
by hgonzale
Sat Nov 17, 2018 9:21 pm
Forum: General
Topic: Two VLANS to another place. Voip + Data
Replies: 57
Views: 4292

Re: Two VLANS to another place. Voip + Data

Noo, I think is for me.... but, what do you want to do with this config?
by hgonzale
Sat Nov 17, 2018 9:08 pm
Forum: General
Topic: Two VLANS to another place. Voip + Data
Replies: 57
Views: 4292

Re: Two VLANS to another place. Voip + Data

Thank you my friend for your interest. But... for whats is this? Sorry if I don't understand Since the ISP cannot guarantee what devices may or may not be able to do (feature set), then I would suggest its a hard coded VLAN number (as mkx suggested). If so then for for the setup I would use the foll...
by hgonzale
Sat Nov 17, 2018 8:47 pm
Forum: General
Topic: Two VLANS to another place. Voip + Data
Replies: 57
Views: 4292

Re: Two VLANS to another place. Voip + Data

Yes Mr. I will try it maybe the next week. I hope is not auto sense.... just VLAN pre configured in the phone.
by hgonzale
Sat Nov 17, 2018 8:39 pm
Forum: General
Topic: Two VLANS to another place. Voip + Data
Replies: 57
Views: 4292

Re: Two VLANS to another place. Voip + Data

Thank you Mr. Is the way... you are right, they are hybrid ports. The menu in the phone is very very small (it has an admin access with 16 digits password jajajaja). and yes, I need to discover the ID. And I will try the next week to do the sniffer. Thank you for the HW offload. I didn't know it. Su...
by hgonzale
Sat Nov 17, 2018 8:19 pm
Forum: General
Topic: Two VLANS to another place. Voip + Data
Replies: 57
Views: 4292

Re: Two VLANS to another place. Voip + Data

Exactly I didn't know but thinking the ISP switch has "not different" between the "voip ports" and the normal ports, just the "voip ports" have a VLAN allowed.. then, when I connect this port to the MK Switch TWO times in the same bridge, I am getting the loop. GRRRRR Hating movistar with their supe...
by hgonzale
Sat Nov 17, 2018 8:11 pm
Forum: General
Topic: Two VLANS to another place. Voip + Data
Replies: 57
Views: 4292

Re: Two VLANS to another place. Voip + Data

First, I will answer something and after I will explain what did I discover today 1.- The first 8 ports in the ISP switch are allowed to use VoIP. If I connect the ISP pre-configured phones to others ports, it doesn't work. It must be only in the first 8 ports. But I discovered if I connect a comput...
by hgonzale
Sat Nov 17, 2018 5:10 pm
Forum: General
Topic: Two VLANS to another place. Voip + Data
Replies: 57
Views: 4292

Re: Two VLANS to another place. Voip + Data

My friend. If I do this (I am trying now) I got a big one loop and in the logs, before the disconnection I got:

ethe3: bridge port received packet with own address as source (cc:2d:e0:2f:07:61), probably a loop

I think the switch from the ISP has the same mac address in different ports
by hgonzale
Sat Nov 17, 2018 1:26 pm
Forum: General
Topic: Two VLANS to another place. Voip + Data
Replies: 57
Views: 4292

Re: Two VLANS to another place. Voip + Data

Thank you, maybe I will try today. but a question
Does it means I will have only ONE bridge?
Not two bridges?
by hgonzale
Fri Nov 16, 2018 8:36 pm
Forum: General
Topic: Two VLANS to another place. Voip + Data
Replies: 57
Views: 4292

Re: Two VLANS to another place. Voip + Data

Thank you my friend for your answer. In the example is only with ONE bridge. I need to bridges, coming from different ETH... JOIN in a single ETH (I think 2 VLANS) and after in the another equipment, SEPARATE it. I will disable RSTP.... but, I don;t understand something from the example.. /interface...
by hgonzale
Fri Nov 16, 2018 1:51 pm
Forum: General
Topic: Two VLANS to another place. Voip + Data
Replies: 57
Views: 4292

Two VLANS to another place. Voip + Data

I have a little trouble and I will explain first. The ISP at my friend location installed a Switch with 12 ports. 6 ports are only for VoIP (this own PBX) and the other 6 are for normal data. My friend has a little far away room (200 mts) we linked using Ubiquiti Nano.... but the Voip is not working...
by hgonzale
Thu Nov 15, 2018 5:11 pm
Forum: Beginner Basics
Topic: ethernet over lte/usb
Replies: 6
Views: 725

Re: ethernet over lte/usb

I think the IP is coming from your ISP. They are doing NAT for many users and not giving a real IP to each one connection
by hgonzale
Thu Nov 15, 2018 3:22 pm
Forum: General
Topic: 100Mbps client works only on 10Mbps halfduplex on RB951G-2HND fw 6.34
Replies: 12
Views: 846

Re: 100Mbps client works only on 10Mbps halfduplex on RB951G-2HND fw 6.34

connect successfully? at what speed the link?
by hgonzale
Thu Nov 15, 2018 2:25 pm
Forum: General
Topic: 100Mbps client works only on 10Mbps halfduplex on RB951G-2HND fw 6.34
Replies: 12
Views: 846

Re: 100Mbps client works only on 10Mbps halfduplex on RB951G-2HND fw 6.34

ohhhh. and did you try another 100 Mbps equipment in the same port?
by hgonzale
Sat Nov 03, 2018 9:33 am
Forum: General
Topic: Is mikrotik a good choice?
Replies: 56
Views: 3768

Re: Is mikrotik a good choice?

Super!!!!!!!!
by hgonzale
Mon Oct 29, 2018 11:50 am
Forum: General
Topic: LOOP problem
Replies: 7
Views: 1148

Re: LOOP problem

No, still waiting a solution... Changing something and still the problem
by hgonzale
Tue Oct 16, 2018 3:58 pm
Forum: General
Topic: PCP support for CG-NAT on WAN
Replies: 2
Views: 373

Re: PCP support for CG-NAT on WAN

Mayeb the best for you is use a VPN service providing you a canonical name or fixed ip.
by hgonzale
Tue Oct 16, 2018 2:37 pm
Forum: General
Topic: Dynamic DNS inside a LAN
Replies: 35
Views: 4054

Re: Dynamic DNS inside a LAN

My friend, do you still need the VPN server with port forward?
by hgonzale
Tue Oct 16, 2018 2:24 pm
Forum: General
Topic: LOOP problem
Replies: 7
Views: 1148

Re: LOOP problem

I am having the same issues, hundreds everyday. Here my info, if somebody could help me..... thank you /interface ethernet set [ find default-name=ether1 ] comment="WAN Port FTTH" loop-protect=on name=ether1-gateway set [ find default-name=ether2 ] comment=Homero name=ether2-master-local set [ find ...
by hgonzale
Tue Oct 16, 2018 10:04 am
Forum: RouterBOARD hardware
Topic: New "RB2011".... reloaded [SOLVED]
Replies: 12
Views: 1672

Re: New "RB2011".... reloaded [SOLVED]

It depends my friend, but yes.... for and "power house" like mine.... I have 10 used, now I am using a RB493 extra like AP and Switch but my 10 ports are FULL right know, and the CPU average is getting high with everyday more VPN (L2tp + IPsec) users and the internet speed is getting higher everyday...
by hgonzale
Mon Oct 15, 2018 1:43 pm
Forum: RouterBOARD hardware
Topic: New "RB2011".... reloaded [SOLVED]
Replies: 12
Views: 1672

Re: New "RB2011".... reloaded [SOLVED]

Yes. Thank you my friend. And the FULL reloaded is the 4011, but I was "waiting" some little cheaper (between 2011 and 4011) jajaja
But if this is the answer.. PERFECT...
Waiting in Europe for try it.
by hgonzale
Mon Oct 15, 2018 1:03 pm
Forum: RouterBOARD hardware
Topic: New "RB2011".... reloaded [SOLVED]
Replies: 12
Views: 1672

New "RB2011".... reloaded [SOLVED]

Now, you are "selling/creating" very nice and new equipment like RB3011, hEX etc etc But the RB2011 still doesn't have a replacement. For example the RB has 10 ports, one model with very good wifi (2.4.... but wifi) and option for -non- rack mount. Are you planning to create a office/home powerfull ...
by hgonzale
Sun Oct 07, 2018 12:17 pm
Forum: General
Topic: Is mikrotik a good choice?
Replies: 56
Views: 3768

Re: Is mikrotik a good choice?

This progrma also show you interferences, not just WIFI... it show anything in 2.4 Ghz. Of course, you won't know what is.. but it will show "noise".
Dont you have a "normal" pc? jajaja
by hgonzale
Sun Oct 07, 2018 11:02 am
Forum: General
Topic: Is mikrotik a good choice?
Replies: 56
Views: 3768

Re: Is mikrotik a good choice?

Ok. I understand you alsoi. Did you try Insidder for doing a good spectrum scan? sure, I know, I understand very well and I know it's not your fault! :-) Unfortunately, with a blocked router, we can not do anything, I can only buy an ac2 and set it up with your advice. two more things: channel 9 is ...
by hgonzale
Sat Oct 06, 2018 10:48 pm
Forum: General
Topic: Is mikrotik a good choice?
Replies: 56
Views: 3768

Re: Is mikrotik a good choice?

I understand your problem my friend, but understand also US and Mikrotik. If you can't change anything in the router and your have "wrong" (really is not wrong, maybe is not suitable for you) options... we can't do anything.... For you now maybe the best channel is channel 9 o 10... (but anyway, it ...
by hgonzale
Sat Oct 06, 2018 7:50 pm
Forum: General
Topic: Is mikrotik a good choice?
Replies: 56
Views: 3768

Re: Is mikrotik a good choice?

The situation is RIGHT NOW. THe inferences could be a new microwave from a neighbor , a new wireless network.... is not a constant in the time, and maybe at 3 am you will have a super connection. You don't need access to the router for making a spectrum analysis, donwload InSidder and make a spectru...
by hgonzale
Sat Oct 06, 2018 6:21 pm
Forum: General
Topic: Is mikrotik a good choice?
Replies: 56
Views: 3768

Re: Is mikrotik a good choice?

Yes, but the interferences are NOT a "router" issue. Remember, in 2.4 Ghz thare are: Microwave oven, bluetooth device, PS3, Ps4 controls, all the OTHER WIFI surrounding, wireless phone (for fixed lines), video sender, etc etc ALll of those device makes interference in the WIFI, all are in 2.4 ghz Fo...
by hgonzale
Sat Oct 06, 2018 5:57 pm
Forum: General
Topic: Is mikrotik a good choice?
Replies: 56
Views: 3768

Re: Is mikrotik a good choice?

If you have issue with your speed using wire, this is not your problem, is ISP.....
by hgonzale
Sat Oct 06, 2018 5:22 pm
Forum: General
Topic: Is mikrotik a good choice?
Replies: 56
Views: 3768

Re: Is mikrotik a good choice?

Ohhh you have a DOT (decimals)... 1.106 ms means 1 seg and 106 ms jajajajaja NOT 1106 ms.... And with wire? Give me a frequency scan please... I'm sorry, those are the values during the issue with the fixed channel with incompatibility problems (few minutes connected then the connection dropped): 64...
by hgonzale
Sat Oct 06, 2018 3:27 pm
Forum: General
Topic: Is mikrotik a good choice?
Replies: 56
Views: 3768

Re: Is mikrotik a good choice?

My friend, please, setup the Wireless in the channel with lower noise. Fixed channel. Second, I think is impossible for measure a ping of 6.000.000 ms. It means you were waiting the "answer" for 6.000 sec = 1.66 HOURS. Is about 1:40 hours... There is not equipment for a ICMP timeout so big.... When ...
by hgonzale
Thu Oct 04, 2018 10:49 pm
Forum: General
Topic: queue problem
Replies: 16
Views: 1208

Re: queue problem

Disable IP Fasttrack/IP Fast PAth en IP Settings
by hgonzale
Wed Sep 26, 2018 10:03 pm
Forum: General
Topic: Is mikrotik a good choice?
Replies: 56
Views: 3768

Re: Is mikrotik a good choice?

Sindy.. if you tried it. perfecto..... And yes, you are focused on helping him with the wireless, and my, in the WAN (good team). Then... it will handle the 1 Gpps... and now, finish the topic with the wireless jejeje And for the last question, I don't think it will be a problem, it will work with t...
by hgonzale
Wed Sep 26, 2018 7:29 pm
Forum: General
Topic: Is mikrotik a good choice?
Replies: 56
Views: 3768

Re: Is mikrotik a good choice?

Ummm a LOT.... maybe this router is "small" for that. But I prefer an answer from somebody from mikrotik. Is this router cabale of getting 1 Gps using PPPoE with fastpath? the isp says 1000/300 and, granted, 300/200 I'm not yet at home so I can not tell more ... I live most of the time alone, so I u...
by hgonzale
Wed Sep 26, 2018 7:28 pm
Forum: General
Topic: Is mikrotik a good choice?
Replies: 56
Views: 3768

Re: Is mikrotik a good choice?

You are right... but I didn't want to explain so much,... the problem is the ONT from the ISP has the authentication in ONT, and you need to "hack" the original ONT, serials, etc etc etc and create a firmware for the mikrotik ont or something like that. Is not just plug the fiber and getting the int...
by hgonzale
Wed Sep 26, 2018 7:22 pm
Forum: General
Topic: Loosing VPN interfaces when reconnect [SOLVED]
Replies: 7
Views: 605

Re: Loosing VPN interfaces when reconnect [SOLVED]

My friend. THIS IS WORKING perfectly
I didn't know it. WOWWWWWWWWWWWWWWWWWWW
THANK YOUUUUUUUUUUUUUUUUUUUUUUUUU
many routers for changing it right now jajajaja
by hgonzale
Wed Sep 26, 2018 7:08 pm
Forum: General
Topic: Loosing VPN interfaces when reconnect [SOLVED]
Replies: 7
Views: 605

Re: Loosing VPN interfaces when reconnect [SOLVED]

OHHHHHHHHHHHHHHHHHH WOWWWWWWWWW Supper explainin!!!!!!!

That is the best answer!!!!

I didn't know how to do it..... amazing my friend

I will try later, but this is super

And yes, I always have only ONE CONNECTION.
by hgonzale
Wed Sep 26, 2018 7:06 pm
Forum: General
Topic: Is mikrotik a good choice?
Replies: 56
Views: 3768

Re: Is mikrotik a good choice?

But know for you is IMPORTANT you uplink/downlink REAL speed, because WE (all together) need to measure which one kind of CPU do you need for handling it. For example, look in this forum: movistar spain ppooe and you will find a lot of issues reaching 300 Mbps with certain equipment, because the enc...
by hgonzale
Wed Sep 26, 2018 6:14 pm
Forum: General
Topic: Loosing VPN interfaces when reconnect [SOLVED]
Replies: 7
Views: 605

Re: Loosing VPN interfaces when reconnect [SOLVED]

I don't understanb, sorry give a name to the l2tp server? each connection to "me" has a name like: l2tp-username is already, but when the VPN client disconnect, the "name" disappear.... and disappear from all the references, but now I am doing like the first answer, using IP..... waiting for loosing...
by hgonzale
Wed Sep 26, 2018 5:50 pm
Forum: General
Topic: Is mikrotik a good choice?
Replies: 56
Views: 3768

Re: Is mikrotik a good choice?

Ok. I understand and sorry for my bad english, is not my native language.... And "normally" (he doesn't say in that country is and the ISP) the ONT are only bridging, and in "many" times, the PPPoE is always in the router side, two or three times I saw the ONT doing like a router and giving ab "inte...
by hgonzale
Wed Sep 26, 2018 5:41 pm
Forum: General
Topic: Is mikrotik a good choice?
Replies: 56
Views: 3768

Re: Is mikrotik a good choice?

Maybe I am not understanding

He said:

FTTH - ONT - Router

and he HAS already the FTTH and the ONT..

He is going to buy the mikrotik and connect to the ONT he has already
by hgonzale
Wed Sep 26, 2018 5:33 pm
Forum: General
Topic: Is mikrotik a good choice?
Replies: 56
Views: 3768

Re: Is mikrotik a good choice?

He need the ONT my friend.
He can't connect the fiber to the router, and even, with a fiber module, he doesn't have the auth factor in the ONT.
by hgonzale
Wed Sep 26, 2018 5:21 pm
Forum: General
Topic: Is mikrotik a good choice?
Replies: 56
Views: 3768

Re: Is mikrotik a good choice?

Good. Then you need a PPPoE auth. Is a recourse usage protocol. Tell me, is really 1 Gbps up/down It could be "difficult" for getting this speed with a PPPoE encapsulation with THIS hardware. And after you learn how to work with RouterOS.. you will be do all in the router, even the VPN you can creat...
by hgonzale
Wed Sep 26, 2018 3:58 pm
Forum: General
Topic: Loosing VPN interfaces when reconnect [SOLVED]
Replies: 7
Views: 605

Re: Loosing VPN interfaces when reconnect [SOLVED]

ummmmmm interesting!!!!!!!
And yes. It makes sense!
I will try Mr...
by hgonzale
Wed Sep 26, 2018 3:56 pm
Forum: General
Topic: Is mikrotik a good choice?
Replies: 56
Views: 3768

Re: Is mikrotik a good choice?

Another question... how is you internet connection?

FTTH/VDSL/Cable?

Will you need an ONT before?

Will you do the authentication with PPPoE? This feature is a CPU usage, if you need to encapsulate the packages...

Or are you directly obtaining the IP address from the ISP bridge?
by hgonzale
Wed Sep 26, 2018 3:54 pm
Forum: General
Topic: Is mikrotik a good choice?
Replies: 56
Views: 3768

Re: Is mikrotik a good choice?

Many answers for many questions...but first, in resume.. OF COURSE mikrotik is a super option for router, maybe the best... but remember this... A normal router from the ISP is the following devices.. GPON (in FTTH)/MODEM (in ADSL/VDSL) + Bridge + Router + Switch + AP Mikrotik don't do/make directly...
by hgonzale
Wed Sep 26, 2018 1:23 pm
Forum: General
Topic: Loosing VPN interfaces when reconnect [SOLVED]
Replies: 7
Views: 605

Loosing VPN interfaces when reconnect [SOLVED]

I have some mikrotiks in differents countries and I have "mark routing" to some IP for going to that IP using that route. The problem is... I have a mark routing with the "vpn internface" but when the vpn is down, the vpn name dissapear, and all the relations are loose, when the VPN reconnect, the "...
by hgonzale
Tue Sep 25, 2018 11:47 am
Forum: General
Topic: What happens width Cloud Update time ?
Replies: 3
Views: 316

Re: What happens width Cloud Update time ?

The cloud was created for DDNS resolution, and time sincro is a "secondary" service, but is not a NTP client/server

Use NTP client with a NTP server n1 or n2...
by hgonzale
Sun Jul 01, 2018 2:59 pm
Forum: General
Topic: VLAN SWITCH
Replies: 38
Views: 2127

Re: VLAN SWITCH

And whats is the maximum speed needed? One wire is possible for 2 links repated at 100 Mbps
by hgonzale
Sun Jul 01, 2018 12:36 pm
Forum: General
Topic: VLAN SWITCH
Replies: 38
Views: 2127

Re: VLAN SWITCH

Just an idea....
Is not possible for running another wire?
With two wires... no "hard" config....
by hgonzale
Wed Jun 27, 2018 4:18 am
Forum: General
Topic: unknown admin with unknown IP address loges in my mikrotik router via API [SOLVED]
Replies: 6
Views: 818

Re: unknown admin with unknown IP address loges in my mikrotik router via API [SOLVED]

IS not secure the winbox conection.

Please, activate VPN (l2tp + ipsec), connect to the VPN and after, to the winbox (not opened in the wan)
by hgonzale
Sun Jun 24, 2018 2:20 pm
Forum: General
Topic: Getting a lot of probabily loop between two equipment
Replies: 0
Views: 302

Getting a lot of probabily loop between two equipment

I have the follow configuration 1 RB2011 with eth9 with TWO VLANS 100 and 300 1 RB433 with eth1 linked to the RB2011-eth9 and the same two VLANS 100 and 300. but I am getting hundreds of this: 12:49:09 interface,warning vlan-100-eth9: bridge port received packet with own address as source address (0...
by hgonzale
Sun Jun 10, 2018 4:19 pm
Forum: Beginner Basics
Topic: L2TP/IPSec Client
Replies: 3
Views: 546

Re: L2TP/IPSec Client

Please contact me, we have VPN for people like you... That live in "special countries" and I can help you..
by hgonzale
Sun Jun 10, 2018 1:36 pm
Forum: General
Topic: IP Address Range for a firewall rule?
Replies: 5
Views: 603

Re: IP Address Range for a firewall rule?

I have a situation like you. Even, if they are in the same bridge and same "physical" networks, they have separated subnet, then for reaching each other the need to pass trough the "router". Simple add 2 rules for each network blocking the nat add action=drop chain=forward dst-address=172.16.2.0/24 ...
by hgonzale
Wed Jun 06, 2018 5:30 pm
Forum: General
Topic: VLAN missundersatand.
Replies: 0
Views: 254

VLAN missundersatand.

I am almost sure that is NOT at problem, is a non-knowledge about VLAN in my side... I will explain my situation Vlan100 = VIP/private Vlan300 = others Network private: 192.168.10.0/24 Network public: 192.168.12.0/24 1.- Main mikrotik router 2011 with 2 VLANs. 100 and 300 id. VLAN-100 IP = 192.168.1...
by hgonzale
Thu May 24, 2018 10:54 am
Forum: General
Topic: DHCP for 1000 Clients on a Wireless Network
Replies: 1
Views: 354

Re: DHCP for 1000 Clients on a Wireless Network

1.- You can use a wide subnet. For example: 192.168.x.x/16 give you 64K of address. You can play with the subnet. 2.- In DHCP server poor you have an option called: NEXT POOL. When a pool address is empty, it will continue to the next one. But the option 1 in the correct in this case. A big one pool...
by hgonzale
Sat Apr 28, 2018 10:18 pm
Forum: General
Topic: L2TP is disconnect after every 8 hours
Replies: 47
Views: 7188

Re: L2TP is disconnect after every 8 hours

All mines are other mikrotiks..

I have a dialup pptp to my server without encryption but is not in the list.
They are only dial in, I need to extract the dial out, but I don't know to do
by hgonzale
Sat Apr 28, 2018 4:23 pm
Forum: General
Topic: L2TP is disconnect after every 8 hours
Replies: 47
Views: 7188

Re: L2TP is disconnect after every 8 hours

In my house now: (receiving) Flags: R - radius 0 name="casavzla" service=l2tp caller-id="186.xx.xx.xx" address=192.168.16.11 uptime=3d14h33m3s encoding="cbc(aes) + hmac(sha256)" session-id=0x81002F85 limit-bytes-in=0 limit-bytes-out=0 1 name="mayjo" service=l2tp caller-id="95.xx.xx.xx" address=192.1...
by hgonzale
Sat Apr 28, 2018 2:42 pm
Forum: General
Topic: L2TP is disconnect after every 8 hours
Replies: 47
Views: 7188

Re: L2TP is disconnect after every 8 hours

Yes. It happens to me also, but know I didn't care about the disconnection because "now" it could happens to my links, but someday I will need a continuous link
by hgonzale
Sat Apr 28, 2018 2:00 pm
Forum: General
Topic: L2TP is disconnect after every 8 hours
Replies: 47
Views: 7188

Re: L2TP is disconnect after every 8 hours

Yeah, it doesn't matter the version.
It happens to me sometimes with some "routers".
Did you check if the IP is changing in one side. Maybe the problem (i didn't check it) is the IP changing from the ISP...
by hgonzale
Thu Mar 22, 2018 12:03 pm
Forum: General
Topic: Any plans to make cross-platform WinBox?
Replies: 33
Views: 2967

Re: Any plans to make cross-platform WinBox?

winbox works perfectly in linux with wine. Years using it.....
by hgonzale
Sun Oct 29, 2017 8:00 pm
Forum: Beginner Basics
Topic: Understanding and develop VLAN
Replies: 4
Views: 443

Re: Understanding and develop VLAN

Ahhh ok ok. Thank you!
I have a 751 for backup, I will install it there then, and I will try to practice something!
by hgonzale
Sun Oct 29, 2017 7:55 pm
Forum: Beginner Basics
Topic: Understanding and develop VLAN
Replies: 4
Views: 443

Re: Understanding and develop VLAN

RC? GA?
by hgonzale
Sun Oct 29, 2017 12:34 pm
Forum: Beginner Basics
Topic: cannot connect rb433
Replies: 2
Views: 368

Re: cannot connect rb433

Why did you downgrade?
Second... Install the lastest, and the wireless must be included (i think so)
by hgonzale
Sun Oct 29, 2017 1:36 am
Forum: Beginner Basics
Topic: Understanding and develop VLAN
Replies: 4
Views: 443

Understanding and develop VLAN

Hello. I am understanding now the VLAN concept and I think I understand it, but I have "problems" (becuase I don't know how to do it) and I will explain what I want, and maybe you can say me some tricks. First... Equipment and what is in each one RB2011 eth 1 = WAN eth 2 = master for 3, 4 and 5 eth ...
by hgonzale
Wed Oct 25, 2017 10:09 pm
Forum: General
Topic: Networking In warehouse
Replies: 1
Views: 306

Re: Networking In warehouse

You question is "so big" my friend. What do you want to do? For what? It doesn't matter if is in a Warehouse, home,, office, company, if for what, and what do you want to do? Servers... trafficc, speed, domain, dhcp, dns, VPN's with other placers, or if you have "employees" outside and the need to "...
by hgonzale
Wed Oct 18, 2017 11:20 pm
Forum: Wireless Networking
Topic: omni to increase range of signal
Replies: 15
Views: 1729

Re: omni to increase range of signal

A friend replied you something very important, and I repeat A wireless communication is the same that TWO people talking Is we are separated for 200 meters, and in one side I have a loudspeaker, you in the other side, maybe you can listen me, but if you talk normally..... (a phone, tablet, without h...
by hgonzale
Sun Oct 15, 2017 1:34 am
Forum: General
Topic: Mikrotik will lose internet connection under heavy download usage [SOLVED]
Replies: 10
Views: 1494

Re: Mikrotik will lose internet connection under heavy download usage [SOLVED]

Make a ping FROM the mikrotik, check the logs and try alto to ping your modem/router from the ISP. Is the modem in bridge mode? Could it be saturation? Have you tried capping the bandwidth just below your max speed to see if it will keep it alive? Thanks jspool I'll try that. BartoszP - Sorry I forg...
by hgonzale
Wed Jul 26, 2017 9:40 pm
Forum: General
Topic: Switch in RB493 vs RB2011
Replies: 0
Views: 323

Switch in RB493 vs RB2011

I have in my network two Mikrotik. A RB493 like switch and AP, and a RB2011 like Router+switch+Backup AP I realized in the 2011 I am able to see the traffic in each one switch port. I'd created 2 master (port 2 and 6). 3, 4 and 5 are slave of 2, and 7, 8 ,9 10 are slave of 6. And after a bridge betw...
by hgonzale
Sun Jul 23, 2017 8:45 pm
Forum: Beginner Basics
Topic: Block access to winbox/web interface from wifi
Replies: 35
Views: 10995

Re: Block access to winbox/web interface from wifi

Mikrotik are not simple routers STEP-STEP, they are complete system for network router/security and you need to know very WELL about TCP/IP and about RouterOS.

Is you want a CLICK CLICK router, Mikrotik is not for you!!!!
by hgonzale
Sun Jul 23, 2017 6:58 pm
Forum: General
Topic: How to combine 3 WAN speed
Replies: 10
Views: 7672

Re: How to combine 3 WAN speed

Partially my friend. One single download CAN'T be at 16 Mbps, because routes and protocols are involved. Of course, if you have 3 downloads or MORE, you can reach 16. But a single connection is not possible. OF course, if you can install equipment in the ISP side and in your side, you can get 16 Mbp...
by hgonzale
Mon Jun 26, 2017 11:34 pm
Forum: Wireless Networking
Topic: Wirelles can over 25mb of Download
Replies: 18
Views: 3677

Re: Wirelles can over 25mb of Download

you are not having a problem. Is normal In a 802.11g/a network with a link of 54 Mbps the MAX USABLE data rate is about 25 Mbps The real throughput for 54 Mbps is close to 25 Mbps.... The rest of data is protocol and other data In a 72 Mbps link is a little bit bigger Then, are coming protocols with...
by hgonzale
Sat Jun 24, 2017 1:00 pm
Forum: General
Topic: Ubiquity Unifi as Slave to Mikrotik Hotspot and VLAN
Replies: 4
Views: 2145

Re: Ubiquity Unifi as Slave to Mikrotik Hotspot and VLAN

I found the post..... searching and searching jeje

Read it please

https://community.ubnt.com/t5/UniFi-Wir ... d-p/277575

And because your Unifi won't have internet (they are not logged on), they will disable itself.!!!!!!
by hgonzale
Sat Jun 24, 2017 12:16 pm
Forum: General
Topic: Ubiquity Unifi as Slave to Mikrotik Hotspot and VLAN
Replies: 4
Views: 2145

Re: Ubiquity Unifi as Slave to Mikrotik Hotspot and VLAN

Super. And also, please disable the option in the Unifi Controller about cheking internet, because the Unifi AP won't have internet (its IP is not logged on), and It will be disable by himself because is without internet (stupid option like everything in the Unifi software) Disable this check and th...
by hgonzale
Fri Jun 23, 2017 10:17 pm
Forum: General
Topic: L2TP/IPSec - Can only connect with SHA1
Replies: 10
Views: 2065

Re: L2TP/IPSec - Can only connect with SHA1

Jajaja I am not paranoid with the CIA.. and even.. in personal, I am pro USA jajajaja (sorry for others) But my paranoid is with Venezuelan government and for the security of the journalist I am helping!!!!! And Venezuela government is helped by G2... sorry for talking about politicians jeje Thank y...
by hgonzale
Fri Jun 23, 2017 10:05 pm
Forum: General
Topic: L2TP/IPSec - Can only connect with SHA1
Replies: 10
Views: 2065

Re: L2TP/IPSec - Can only connect with SHA1

Ok, I will investigate myself, but in resume, aren't we able to use sha256?

I am providing free VPN for friends and journals in my country (Venezuela) for their own security, and I want to help them with the security...
by hgonzale
Fri Jun 23, 2017 6:51 pm
Forum: General
Topic: L2TP/IPSec - Can only connect with SHA1
Replies: 10
Views: 2065

Re: L2TP/IPSec - Can only connect with SHA1

phase1? Could you explain me a little bit!!!!

Thank you
by hgonzale
Fri Jun 23, 2017 6:21 pm
Forum: General
Topic: L2TP/IPSec - Can only connect with SHA1
Replies: 10
Views: 2065

Re: L2TP/IPSec - Can only connect with SHA1

not, mikrotik -- mikrotik
by hgonzale
Mon Jun 19, 2017 12:20 pm
Forum: General
Topic: L2TP/IPSec - Can only connect with SHA1
Replies: 10
Views: 2065

Re: L2TP/IPSec - Can only connect with SHA1

Yes but you are using SHA1 (insecure now) and the original post and me, we are having troubles using sha256
by hgonzale
Sun Jun 18, 2017 8:11 pm
Forum: General
Topic: Netbios vs bridge
Replies: 7
Views: 1978

Re: Netbios vs bridge

WINS server?
Setup in the IP option the wins server to your windows server
by hgonzale
Sun Jun 11, 2017 9:41 pm
Forum: General
Topic: Port forwarding? in a bridged lan network
Replies: 3
Views: 868

Re: Port forwarding? in a bridged lan network

Simple, don't assign and IP address to ETH1..
by hgonzale
Sun Jun 11, 2017 2:11 am
Forum: General
Topic: Port forwarding? in a bridged lan network
Replies: 3
Views: 868

Re: Port forwarding? in a bridged lan network

One mistake

1.- You are going to be a DHCP client in ETH1... Don't configure an IP address on that interface
by hgonzale
Thu Jun 08, 2017 12:00 am
Forum: General
Topic: upgrade the license to Level4,
Replies: 16
Views: 1426

Re: upgrade the license to Level4,

Of course, not problem
We have L4 licences at 29,99Eur/35US$ each one at today exchange rate.

Paypal payments accepted.
by hgonzale
Wed Jun 07, 2017 10:01 pm
Forum: General
Topic: Whatsapp Blockage
Replies: 8
Views: 1975

Re: Whatsapp Blockage

Whis this scripts that runs every X seconds # Use DNS Entrys and add Address to the Firewall Address-list # :foreach i in=[/ip dns cache all find where (name~"whatsapp") && (type="A") ] do={ :local tmpAddress [/ip dns cache get $i address]; delay delay-time=10ms # prevent script from using all cpu t...
by hgonzale
Wed Jun 07, 2017 9:50 pm
Forum: General
Topic: [Solved] IP-Cloud not always working
Replies: 3
Views: 5291

Re: [Solved] IP-Cloud not always working

Ig you are using Telefonica in Spain you have 2 options for getting the Internet valid IP address in the mikrotik 1.- Request Telefonica for the ONT only. You will take away the router (is a $#%#$%#$%) and you will have the ONT only working like media converter. You need to make pppoe client in the ...
by hgonzale
Wed Jun 07, 2017 9:45 pm
Forum: General
Topic: upgrade the license to Level4,
Replies: 16
Views: 1426

Re: upgrade the license to Level4,

We are able to provide you the licenses. Contact us in private
by hgonzale
Mon Jun 05, 2017 9:53 am
Forum: General
Topic: L2TP is disconnect after every 8 hours
Replies: 47
Views: 7188

Re: L2TP is disconnect after every 8 hours

mukes, in your situation, you aren't connected ever. just ... connecting, but you never gets.... connected.
by hgonzale
Mon Jun 05, 2017 9:34 am
Forum: General
Topic: Help Needed with 2 Different ISP on one Router
Replies: 2
Views: 341

Re: Help Needed with 2 Different ISP on one Router

In general.... use your router like "two" routers. Eth1 = Wan 1 Eth2 (master), Eth3, Eth4 (for example) in Bridge = ISP1 Eth5 = Wan2 Eth6 (master), eth7, eth8 (for example) in Bridge = ISP2 Then, make 2 masquerade. With origin ISP1/eth2 outgoing to Eth1 and ISP2/eth5 outgoing to Eth5 Create two DHCP...
by hgonzale
Mon Jun 05, 2017 9:29 am
Forum: General
Topic: iPhone cannot connect to L2TP VPN server
Replies: 2
Views: 805

Re: iPhone cannot connect to L2TP VPN server

Try l2tp/ipsec in the router (even, is more secure) and you will be able to do in the iphone/ipad.

I have l2tp/ipsec and my ipad runs perfectly
by hgonzale
Thu Jun 01, 2017 12:51 pm
Forum: General
Topic: Can Port Forward the Same Port # to 2 Different Internal IP Addresses?
Replies: 10
Views: 1689

Re: Can Port Forward the Same Port # to 2 Different Internal IP Addresses?

Impossible. Is not a mikrotik issue, is a logical issue. How could you (the router) determine what is the correct destination between two packages?
by hgonzale
Sat May 20, 2017 8:10 pm
Forum: General
Topic: Ipsec service "hangs"
Replies: 0
Views: 391

Ipsec service "hangs"

Hello friend. I am using in some router (2011, 951, 751, etc) L2TP/IPsec (client/server).And sometimes, when the routers has many days working, the IPsec "service" stop working. I can't check the configuration (in winbox nothing appear) and in terminal, the commands hangs (no results) for export or ...
by hgonzale
Tue May 16, 2017 12:32 am
Forum: Beginner Basics
Topic: How to block smb ports and ransomeware ports
Replies: 7
Views: 4175

Re: How to block smb ports and ransomeware ports

if you didn't explicit redirected the port from outside ton ONE IP inside, you won't have SMB traffic in the router form outside to inside.

If you virus/problem is inside, the routers is NOTHING there...
by hgonzale
Tue May 16, 2017 12:26 am
Forum: General
Topic: VPN provider recommendations
Replies: 15
Views: 8184

Re: VPN provider recommendations

Hello my friend.
Where are you from?
I am creating a non-profit VPN server only for helping people in certain " countries", maybe like yours.
If you qualify for my VPN-server you can get an affordable bandwidth using l2tp-ipsec service

Write me in private..
by hgonzale
Wed Feb 22, 2017 10:37 pm
Forum: General
Topic: block Windows 10 update-delivery-optimization
Replies: 20
Views: 9086

Re: block Windows 10 update-delivery-optimization

Yes my friend. With this you can control de download of updates from Microsoft. This is not the problem. The updates are only "one time" by by update. The problem is the computr "sharing" all time the updates with other people. In a placer with for example "100 GB allowance by month", the P2P sharin...
by hgonzale
Wed Sep 14, 2016 5:57 pm
Forum: General
Topic: My iWinbox app is released! Manage your RouterOS devices on iPhone/iPad and SNMP monitoring
Replies: 35
Views: 12541

Re: My iWinbox app is released! Manage your RouterOS devices on iPhone/iPad and SNMP monitoring

Very good my friend. Congratulations again. I've downloaded it today and is working well.

Suggestion. Add thousand separator " , or . doesn't matter if is american or decimal, but is easy for reading the bytes counts, memory, space, etc etc
by hgonzale
Sat Aug 20, 2016 11:58 am
Forum: Beginner Basics
Topic: VoIP - Static and Dropped Calls
Replies: 9
Views: 1019

Re: VoIP - Static and Dropped Calls

Yes, please do it. Remember, the sum of limit-at of everything never could be greater than your guarantee bandwidth. Because the system will give ALWAYS the "limit-at" to each queue. And also, setup some importart queue/mangles to PCQ queue. Check this http://wiki.mikrotik.com/wiki/Manual:Queues_-_P...
by hgonzale
Fri Aug 19, 2016 11:23 pm
Forum: Beginner Basics
Topic: VoIP - Static and Dropped Calls
Replies: 9
Views: 1019

Re: VoIP - Static and Dropped Calls

For you VoIP packets, setup limit_at, is the CIR.. minimum guarantee for this.
For example, 128k, it will be always HAS it... at least
by hgonzale
Fri Aug 19, 2016 6:30 pm
Forum: General
Topic: My iWinbox app is released! Manage your RouterOS devices on iPhone/iPad and SNMP monitoring
Replies: 35
Views: 12541

Re: Inviting you to test My iWinbox app for iOS devices!

For my an iPad is a big iPhone.

Only my recommendation y smaller letters, for more info in the screen.
by hgonzale
Tue Aug 16, 2016 10:24 pm
Forum: General
Topic: block Windows 10 update-delivery-optimization
Replies: 20
Views: 9086

Re: block Windows 10 update-delivery-optimization

Yes, is a great idea for microsoft, but very bad for us, the networks admins
by hgonzale
Tue Aug 16, 2016 8:13 pm
Forum: General
Topic: How to block Youtube and facebook Android App in router Mikrotik
Replies: 30
Views: 71481

Re: How to block Youtube and facebook Android App in router Mikrotik

Yes, for them is a solution, for us is a problem.
by hgonzale
Tue Aug 16, 2016 6:47 pm
Forum: General
Topic: block Windows 10 update-delivery-optimization
Replies: 20
Views: 9086

Re: block Windows 10 update-delivery-optimization

I have the same problem in many of my networks, and many are VSAT with limited bandwidth by month, and in one or two days, the runs off the allowance. I can check and switch off every computer under my control, but many times, the people brings their own computer and kill the bandwidth and allowance...
by hgonzale
Tue Aug 16, 2016 5:23 pm
Forum: General
Topic: My iWinbox app is released! Manage your RouterOS devices on iPhone/iPad and SNMP monitoring
Replies: 35
Views: 12541

Re: Inviting you to test My iWinbox app for iOS devices!

Amazing. Congratulations!!!!
Thank you!!!
Working in iPad with ios 8.2
by hgonzale
Tue Aug 02, 2016 6:25 pm
Forum: General
Topic: VPN + 2 WANS
Replies: 0
Views: 316

VPN + 2 WANS

Hello friend. I have a RB2011 with 2 WANs (eth1 = Vsat and eth10 = 3G/4G). The "default" and main gateway is the eth10, the masquerade for everybody is in this WAN. If I want some device going across the eth1, I do in the mangle a mark routing and setup it. Is good when I want to setup an internal I...
by hgonzale
Mon Jul 25, 2016 10:03 pm
Forum: General
Topic: Question about mangle: mark pack + mark conn + mar routing
Replies: 0
Views: 420

Question about mangle: mark pack + mark conn + mar routing

Maybe this is a estrange question, and I will try to explain better as possible my friends. Now, since today I have two WAN links WAN 1 = Tooway sat unlimited (uk IP) WAN 2 = 4G Movistar spain  unlimited (spain IP) with restrictions: No VPN, No VoIP and some others. Then, I wan to USE both in the sa...
by hgonzale
Sun Jul 03, 2016 9:39 pm
Forum: General
Topic: L2TP + IpSec problem
Replies: 8
Views: 1152

Re: L2TP + IpSec problem

Ok. I tried the three option possibles, and is not working. The client is a MIKROTIK 2011, it is connecting to three other VPN using the SAME configuration. I created another VPN server (for other location) based on my other Mikrotik working, is a "copy" of the other which are working. I explain, 3 ...
by hgonzale
Sat Jul 02, 2016 11:36 am
Forum: General
Topic: L2TP + IpSec problem
Replies: 8
Views: 1152

Re: L2TP + IpSec problem

Not, there is not double NAT.
what is the differecen between port-strict and without?
by hgonzale
Sat Jul 02, 2016 10:06 am
Forum: General
Topic: L2TP + IpSec problem
Replies: 8
Views: 1152

Re: L2TP + IpSec problem

I know IP Pool for VPN must be in VPN, but still, is not a IP problem, is just is NOT connecting......
by hgonzale
Thu Jun 30, 2016 9:13 pm
Forum: Beginner Basics
Topic: Cannot access 2011 via ssh [SOLVED]
Replies: 12
Views: 1123

Re: Cannot access 2011 via ssh [SOLVED]

Where was the problem?
by hgonzale
Thu Jun 30, 2016 12:03 am
Forum: Beginner Basics
Topic: Cannot access 2011 via ssh [SOLVED]
Replies: 12
Views: 1123

Re: Cannot access 2011 via ssh

did you try a nmap/port scan to the router?

Do you have a outgoing firewall in the pc?

Had you tried other computer?
by hgonzale
Wed Jun 29, 2016 11:34 pm
Forum: Beginner Basics
Topic: Cannot access 2011 via ssh [SOLVED]
Replies: 12
Views: 1123

Re: Cannot access 2011 via ssh

ACEEPT port 22 TCP in the interface desired and put the rule before the DROPS/REJECTS

Also, in IP, SERVICES enable SSH service
by hgonzale
Wed Jun 29, 2016 7:57 pm
Forum: Beginner Basics
Topic: Queue Limit speed
Replies: 1
Views: 511

Re: Queue Limit speed

Add first the IP address of the NVR with netmask /32. If is a simple queue, is ready..
by hgonzale
Wed Jun 29, 2016 7:51 pm
Forum: Beginner Basics
Topic: Advice for beginner
Replies: 3
Views: 816

Re: Advice for beginner

Read the example here in the forum, is a very good option. Read the post. Take a Lite router and practice yourself. And for european people, here the book.... http://www.amazon.es/gp/product/B005OY0JJY/ref=as_li_qf_sp_asin_il_tl?ie=UTF8&camp=3626&creative=24790&creativeASIN=B005OY0JJY&linkCode=as2&t...
by hgonzale
Wed Jun 29, 2016 7:47 pm
Forum: Beginner Basics
Topic: Cannot access 2011 via ssh [SOLVED]
Replies: 12
Views: 1123

Re: Cannot access 2011 via ssh

Had you allowed the port 22 in the firewall, just before the ALL DROP rules?
by hgonzale
Wed Jun 29, 2016 7:27 pm
Forum: Beginner Basics
Topic: Conecction between wans
Replies: 2
Views: 483

Re: Conecction between wans

Create a VPN between the Administrative NETWORK and the COMPUTER. 
by hgonzale
Wed Jun 29, 2016 4:41 pm
Forum: General
Topic: L2TP + IpSec problem
Replies: 8
Views: 1152

L2TP + IpSec problem

I have two locations, 1 with FTTH and other with VSAT. I want to make a L2TP VPN with IpSec between both. The dialout is the VSAT with a RB2011, it has 3 other L2TP client connection working perfectly. In the FTTP there is a 751, and the IpSEC and L2TP configuration is a copy of other (where the 201...
by hgonzale
Tue Jun 21, 2016 11:13 pm
Forum: Beginner Basics
Topic: USB modem and hAP AC lite for dummies
Replies: 2
Views: 3076

Re: USB modem and hAP AC lite for dummies

When you connect to USB 3g/4g modem, many time itis detected like LTE1 device. You need the setup the dhcp client in THIS new interface and make the NAT to this interfaces. Other times, the modem is a PPP "serial0" device, you need to setup a PPP client. Go to PPP, add a PPP Client and complete the ...
by hgonzale
Sun Apr 03, 2016 2:10 pm
Forum: Scripting
Topic: Help with auto email sendind script in hAP Lite
Replies: 1
Views: 621

Help with auto email sendind script in hAP Lite

I've been using the following script in many routers for sending email when its reboot: :while ( [/system ntp client get status]!="synchronized" ) do={ :delay 10s } :delay 10s /log info "time updated; uptime: $[/system resource get uptime]" :local es "$[/system identity get name] rebooted on $[/syst...
by hgonzale
Sun Apr 03, 2016 1:31 pm
Forum: General
Topic: Simple Queue and queue type, down queue, up queue and TOTAL queue
Replies: 4
Views: 2101

Re: Simple Queue and queue type, down queue, up queue and TOTAL queue

Super. I know where setup it my friend.
Have a nice sunday my friend and thank you again
by hgonzale
Sun Apr 03, 2016 12:43 pm
Forum: General
Topic: Simple Queue and queue type, down queue, up queue and TOTAL queue
Replies: 4
Views: 2101

Re: Simple Queue and queue type, down queue, up queue and TOTAL queue

Ohhhhhhhhhh wow, so nice. Thank you a lot...... INcredible my friend, thank you. I understand now. However, I need to setup always something there, is a "mandatory" option in the winvox. If I setup DEFAULT o DEFAULT-SMALL, doesn't it matters? I don't have anything the the total limit, any value, jus...
by hgonzale
Sun Apr 03, 2016 2:15 am
Forum: General
Topic: Simple Queue and queue type, down queue, up queue and TOTAL queue
Replies: 4
Views: 2101

Simple Queue and queue type, down queue, up queue and TOTAL queue

In simple queue, we can add to a SQ the queue type for download and for upload, for example we can add PCQ Down and PCQ UP for each one. But I don't understand what is the TOTAL QUEUE TYPE. If I set each in the corresponding PCQ down and UP, what will I set in the total queue type? Thank you, and ex...
by hgonzale
Tue Mar 29, 2016 9:57 am
Forum: General
Topic: RouterOS 6.10 - Clients cannot access internet after schedule regular reboot intermittently
Replies: 4
Views: 579

Re: RouterOS 6.10 - Clients cannot access internet after schedule regular reboot intermittently

I am asking about getting IP in the Router from the Bridge/modem, if your MK is getting the IP, not your clients
by hgonzale
Sun Mar 27, 2016 8:20 pm
Forum: General
Topic: Avoid Windows 10 Telemetry and problem in address list
Replies: 4
Views: 1127

Re: Avoid Windows 10 Telemetry and problem in address list

Pukkita, I need to add many sites (using names), then I want to add to the address list without IP (because, at the creaton moment, I don't know the IP), and using scripts it will determine the time in that moment. Then, I need to have in the first moment, hundreds of address list with the same ip. ...
by hgonzale
Sat Mar 26, 2016 11:50 pm
Forum: General
Topic: Bandwidth distribution w/ individual queue graphs
Replies: 16
Views: 27342

Re: Bandwidth distribution w/ individual queue graphs

Reviving this post hahahaha...
I have a similar situation from you my friend.

VSAT at 20 Mbp,s unlimited traffic, about 10 customer, with maximum 3 Mbps each one.

But, sometimes, the congestion give me about 2 or 3 Mbps..

How did you handle your request?

Thank you
by hgonzale
Sat Mar 26, 2016 11:32 pm
Forum: Wireless Networking
Topic: Universal repeater. Why Mikrotik can't?
Replies: 6
Views: 1906

Re: Universal repeater. Why Mikrotik can't?

Ohhh I will update my RB751 for testing and I will try.... Thank you.
by hgonzale
Sat Mar 26, 2016 10:59 pm
Forum: General
Topic: Variable download speed (From ISP) and PCQ
Replies: 0
Views: 361

Variable download speed (From ISP) and PCQ

I have some install with Tooway (Satellite internet) and RB 75x, 95x and 2011 in my house. Always everything is working great..... But.... you know, when you are using a shared service like satellite internet, the maximum speed is in papers, but depends of many factors, like network congestion, if y...
by hgonzale
Fri Mar 25, 2016 12:40 pm
Forum: Wireless Networking
Topic: Universal repeater. Why Mikrotik can't?
Replies: 6
Views: 1906

Re: Universal repeater. Why Mikrotik can't?

Thak you normis, but I have a question and my example... I have internet satellite and sometimes is down..... rain, problems, etc etc. For that moments, I want to use my cell phone 3g/4g like an AP, and I wnt my mikrotik 2011 to set like client for that network (cell phonme-mk) and continue using my...
by hgonzale
Fri Mar 25, 2016 12:37 pm
Forum: Wireless Networking
Topic: Virtual AP With Different Network Not Getting Internet
Replies: 4
Views: 2078

Re: Virtual AP With Different Network Not Getting Internet

You can also create a new bridge for the virtual AP (just the virtual AP in the bridge) and masquerade the network to your gateway and voila.....

You need to setup a DHCP server for the new bridge and assign ips, etc etc
by hgonzale
Fri Mar 25, 2016 9:43 am
Forum: General
Topic: RouterOS 6.10 - Clients cannot access internet after schedule regular reboot intermittently
Replies: 4
Views: 579

Re: RouterOS 6.10 - Clients cannot access internet after schedule regular reboot intermittently

After the automatically reboots, are you getting the IP from the DHCP?
This is a not normal issue, we need to know first what is happening and at 99% the, the problem is not in the mikrotik...
by hgonzale
Thu Mar 24, 2016 11:32 pm
Forum: General
Topic: Avoid Windows 10 Telemetry and problem in address list
Replies: 4
Views: 1127

Avoid Windows 10 Telemetry and problem in address list

After weeks reading and doing sniffer in my on network and using win10 client, I have a nice list of address and IP for avoiding the Windows 10 Telemetry. I got a list of IP, with this, no problem, a address list and ready... But I have some domains-names and I want to use the following procedure: h...
by hgonzale
Sun Mar 20, 2016 1:58 pm
Forum: General
Topic: Country settings
Replies: 7
Views: 1262

Re: Country settings

Hello, maybe you are using Tooway or Hylas. Both are UK based companies, they have many reseller in Europe. Tooway assign Ip from few countries. They bought some IP from some countries and assign to everyone. I am in Spain but my IP is from UK (I am happy, I can watch UK programs ans subscribe to UK...
by hgonzale
Sun Jan 10, 2016 12:16 pm
Forum: General
Topic: Anyone from Lebanon can help ?
Replies: 1
Views: 668

Re: Anyone from Lebanon can help ?

How much and what king?

I think Ka-Sat has a beam for middle east, and Hylas also....
by hgonzale
Sun Dec 13, 2015 7:29 pm
Forum: Beginner Basics
Topic: Mangle Queue tree and simple queue
Replies: 3
Views: 1838

Re: Mangle Queue tree and simple queue

Of course my friend. for example, I have a configuration like this (resume) Queue tree For all customer Max download youtube: 5 Mbps download Web: 10 Mbps Max download PCQ p2p 256k max download PCQ other not matching previously 5 Mbps And after I have simple queue for each one, with different times ...
by hgonzale
Sun Nov 29, 2015 9:06 pm
Forum: Beginner Basics
Topic: I need your help :) Does anyone know how to combine 4 ISPs to get max. upload speed using RB951G-2HnD
Replies: 3
Views: 688

Re: I need your help :) Does anyone know how to combine 4 ISPs to get max. upload speed using RB951G-2HnD

You can seup different ISP for upload, controlling like round robin, or by service, or by IP, but if you don't controll both sides, you won't be able to get the sum of the UPs speeds. If you have 2 Mbps UP in one, and 5 Mbps up in other, you won't be able to have ONE upload at 7 Mbps. For that you n...
by hgonzale
Sun Nov 29, 2015 9:03 pm
Forum: Beginner Basics
Topic: Open proxy for incoming WAN connections
Replies: 3
Views: 516

Re: Open proxy for incoming WAN connections

Exactly. The proxy provides control and cache for local "customers".
you friend needs is an encrypted VPN (L2TP+IpSec) to use the internet across your ISP.
by hgonzale
Tue Nov 24, 2015 11:17 am
Forum: General
Topic: how to make a queue tree with two master interfaces
Replies: 2
Views: 740

Re: how to make a queue tree with two master interfaces

Thank you my friend, but I have another queue for the WAN and it is for the UPLOAD, all traffic going out, but I have other in eth2-master for the traffic coming in.
by hgonzale
Sat Nov 21, 2015 1:22 am
Forum: Beginner Basics
Topic: Stupid question about "Cloud Routers". What are they?
Replies: 9
Views: 1116

Re: Stupid question about "Cloud Routers". What are they?

We got the answer freemannnn jajaja Thank you a everyone.... Cloud = new marketing term for everything. hahaha but the cloud exist from ALWAYS... the emails always had been "cloud".. ok ok... if you had your own fixed ip and run the sendmail in your computer for your domain is not in the cloud hahah...
by hgonzale
Fri Nov 20, 2015 3:47 pm
Forum: Beginner Basics
Topic: Stupid question about "Cloud Routers". What are they?
Replies: 9
Views: 1116

Re: Stupid question about "Cloud Routers". What are they?

Thank you Normis for your answer. But still I am stupid :) The router ( cloud router) is in your network. If my server are in Amazon EC2, what makes the difference in the routers? :) I dont imagine anything without routers, but it is my question. What is the difference apart the naming between a nor...
by hgonzale
Fri Nov 20, 2015 3:44 pm
Forum: Beginner Basics
Topic: Stupid question about "Cloud Routers". What are they?
Replies: 9
Views: 1116

Re: Stupid question about "Cloud Routers". What are they?

Ahhhhhhhhhhhhhhhh I understand.....
If FOR.... not TO BE a CLoud router....

Just, is like "enterprise", SOHO...... I understand now.

Thank you a lot....
by hgonzale
Fri Nov 20, 2015 3:10 pm
Forum: Beginner Basics
Topic: Stupid question about "Cloud Routers". What are they?
Replies: 9
Views: 1116

Stupid question about "Cloud Routers". What are they?

Maybe I didn't found the correct answer in internet, but, what is a "CLOUD ROUTER" from Mikrotik? Because, for me, I understand a CLOUD service is some software/service/application/infrastructure that is in internet, and not in your building/organization. The email always had been CLOUD, but new the...
by hgonzale
Fri Nov 20, 2015 2:30 am
Forum: Wireless Networking
Topic: New Mobile Home Community with issues...
Replies: 8
Views: 1108

Re: New Mobile Home Community with issues...

Remember, in a Wifi configuration, they are TWO persons (AP and client) talking each other. You are NOT doing anything if you put POWER in one side. When the other side answer you, if it is very low (cell phone) it doesn't have enough power to reach you. Creating do wireless services, you need to in...
by hgonzale
Fri Nov 20, 2015 2:26 am
Forum: Wireless Networking
Topic: Wireless Client and AP together configuration
Replies: 0
Views: 476

Wireless Client and AP together configuration

I know is impossible to have two configuration (AP and Station) working together, but I use my router 75 as AP with virtual AP and 25% like Station and routing the internet for certain IP across the WLAN1 (Station). I realise I can't have the configuration for AP disable and the client enable, or AP...
by hgonzale
Wed Nov 18, 2015 10:18 pm
Forum: Beginner Basics
Topic: mikrotik local DNS-Server are unstable?
Replies: 7
Views: 1652

Re: mikrotik local DNS-Server are unstable?

From the computers, whats is happening if you do a nslookup searching anything?

What do you get?

If you switch off/on just the DNS in the mikrotik, does it solve the problem?
by hgonzale
Wed Nov 18, 2015 8:32 pm
Forum: General
Topic: how to make a queue tree with two master interfaces
Replies: 2
Views: 740

how to make a queue tree with two master interfaces

Hello friend, before I upgrade to a 2011, I had a 75x or 95x, it has just one switch port and one master interface for the land in resume, avoiding many lines, I had something like that: add comment="Download-total Ether" max-limit=20480k name=total-download-ether parent=ether2-master-local priority...
by hgonzale
Tue Nov 17, 2015 10:03 am
Forum: General
Topic: RB750GL soho router issues?
Replies: 5
Views: 926

Re: RB750GL soho router issues?

I had a similar situation like yours with 75x and 95x routers. I dont know why, sometimes the link between two equipment (hardware link) start to changing and faultily. The last time was about two months ago between a Hudge 9650 Vsat modem and the 951 G router. The link must be at 100 Mbps but the r...
by hgonzale
Tue Nov 17, 2015 12:00 am
Forum: General
Topic: Queue tree parent with two master interfaces
Replies: 0
Views: 629

Queue tree parent with two master interfaces

Hello, first, excuse for my ignorance. I will try to explain. I always use MK 75x, 95x where they have only ONE master interface for LAN in the switch. When I am creating Queue tree is very easy, because the first parent is ETH2-master.... and after comes all the rules for incoming with the correct ...
by hgonzale
Thu Nov 12, 2015 2:19 am
Forum: General
Topic: Download / Upload confucion & help
Replies: 10
Views: 1101

Re: Download / Upload confucion & help

Could you contact me in private, for a remote assistance session?
by hgonzale
Tue Nov 10, 2015 10:46 am
Forum: General
Topic: Download / Upload confucion & help
Replies: 10
Views: 1101

Re: Download / Upload confucion & help

Without a big analysis... I can see... The WAN is downloading at about (Rx) 12 Mbps, and the Bridge Local & Eth2 master are sending ~ 12 Mbps. This is the "same" for for download in the computer. = 1.9MBps Now, a stupid question.... What is your IP configuration for the PC? First, why don´t replace ...
by hgonzale
Tue Nov 10, 2015 12:01 am
Forum: General
Topic: Download / Upload confucion & help
Replies: 10
Views: 1101

Re: Download / Upload confucion & help

If you computer show you 10 Mbps download... you can see..... In simple queues... download is download..... 10 Mbps download, for the ip, group ip or something and upload is upload for that... in queue tree.. you need to specify the interfaces... WAN for outgoing.... or ppp or whatever.... and wirel...
by hgonzale
Sat Nov 07, 2015 10:00 pm
Forum: General
Topic: Download / Upload confucion & help
Replies: 10
Views: 1101

Re: Download / Upload confucion & help

For explaining.. Think you are a router.

Upload. All traffic going out from you, maybe in lan or in wan

Download. All traffic coming to you....
by hgonzale
Sat Nov 07, 2015 9:56 pm
Forum: General
Topic: Windows 10 download block. Layer 7 / firewall / etc
Replies: 8
Views: 2280

Re: Windows 10 download block. Layer 7 / firewall / etc

Thank to everyone, but... How can I get a FULL list for the Microsoft download servers and keep updated? and remember, now the updates could be gotten from other users. I think, still, the way is using layer7..... But I am not an expert and I am asking hahahah I disabled always in every place the DN...
by hgonzale
Fri Nov 06, 2015 2:10 pm
Forum: General
Topic: Windows 10 download block. Layer 7 / firewall / etc
Replies: 8
Views: 2280

Re: Windows 10 download block. Layer 7 / firewall / etc

Yes, I know it, but the computer are not always the same, and think... if a familiar is coming to a house for stay the weekend.... A friend... somebody.... I can´t be asking everyday to all my friends... Is there a new computer? is a cousin, sister in law, etc etc coming to your house today? jajajaj...
by hgonzale
Thu Nov 05, 2015 2:09 pm
Forum: General
Topic: Windows 10 download block. Layer 7 / firewall / etc
Replies: 8
Views: 2280

Re: Windows 10 download block. Layer 7 / firewall / etc

Hello my friend. Thank you for your answer. I will explain. They don´t pay me for traffic, I am not an ISP, but some examples... I have a friend, she has SAT internet with 25 GB /month, I installed for her the Mikrotik, and AP with Ubiquiti PicoStation, and and ATA for VoIP. I filtered the p2p in th...
by hgonzale
Wed Nov 04, 2015 10:34 pm
Forum: General
Topic: Is it possible for ISP to access my MikroTik?
Replies: 8
Views: 1352

Re: Is it possible for ISP to access my MikroTik?

I am thinking other way.... do you know what is the HACK tech to create an access point with the same SSID and a open network and send some packets your your router to diconnect all devices?, then your cell phone/computer connect automatically to the other network because it has the same SSID and is...
by hgonzale
Wed Nov 04, 2015 6:04 pm
Forum: Beginner Basics
Topic: Layer 7 facebook block
Replies: 29
Views: 147170

Re: Layer 7 facebook block

You can setup in your mikrotik (if it is the DNS server and you redirect the other dns queries to itself) a static DNS entry for www.facebook.com to 10.0.0.1 (nonexistent IP) and "ready".
Is not pretty... but.... it could work
by hgonzale
Wed Nov 04, 2015 6:00 pm
Forum: General
Topic: Windows 10 download block. Layer 7 / firewall / etc
Replies: 8
Views: 2280

Windows 10 download block. Layer 7 / firewall / etc

We have in some locations (isolated) satellite internet with Tooway, in some places unlimited in other with limit. The mikrotik are pretty well configurated, shapping, priority and everything but now, the windows 8/8.1 and 7 from the users are downloading automatically the Windows 10. Anybody knows ...
by hgonzale
Wed Nov 04, 2015 2:28 pm
Forum: General
Topic: Configuring a WAN interface
Replies: 2
Views: 617

Re: Configuring a WAN interface

There are different matters to do it. first, group the interfaces in two BIG groups, WAN (alone, port 1 for example) and port 2 like MASTER, the the other port slave of the master. Second, create a Bridge with the master lan port inside (just it, the other are slave) Create a NAT rule, with outbound...
by hgonzale
Wed Nov 04, 2015 12:51 pm
Forum: General
Topic: Aleatory problem sending emails for reports/scripts
Replies: 0
Views: 302

Aleatory problem sending emails for reports/scripts

I have about 6 or 8 Mikrotiks (751, 950, 951), all in version 6.23 I am having troubles for sending emails, all are using the same SMTP server, same account for delivering to the same address. The logs for emails are not very extensive, and I am connecting to the SMTP server but in 99% of case in th...
by hgonzale
Sun Jul 05, 2015 1:54 pm
Forum: General
Topic: Problem with router with new ISP bandwith Movistar in Spain to 300 Mb for download fasttrack work wosrst
Replies: 71
Views: 11984

Re: Problem with router with new ISP bandwith Movistar in Spain to 300 Mb for download fasttrack work wosrst

In the comtrend we cant setup configuration like in a Mikrotik. And we know it. But, in my customer routers, with the Comtrend I got the 300 Mbps with 20 or 30 dst-nat for incoming port, like cameras, RDP and etc In the mikrotik, if I setup 2 or 3 dst-nat for cameras, the speed drops automatically f...
by hgonzale
Sat Jul 04, 2015 12:30 pm
Forum: General
Topic: Problem with router with new ISP bandwith Movistar in Spain to 300 Mb for download fasttrack work wosrst
Replies: 71
Views: 11984

Re: Problem with router with new ISP bandwith Movistar in Spain to 300 Mb for download fasttrack work wosrst

I am getting the same issue, bur not just Movistar, any kind of FAST internet (over 200 Mbps aprox). Is so difficult to get the full speed, but if I setup the cheap router from the ISP we can achieve the speed. With Avatel, in a customer, we have 200/200 (guarantee)... If I setup a SINGLE mark conn/...
by hgonzale
Sat Jul 04, 2015 12:27 pm
Forum: General
Topic: Router reboots
Replies: 2
Views: 484

Router reboots

Sometimes, my router (RB751U-2HnD) reboots automaticatly, for example, tonight with 10 days up, but sometimes, 2 or 3 times in a day. Just the router......

What logs do I need to keep in the "disk" for discovering or trying to discover the issue?

Thank you
by hgonzale
Sat Jun 27, 2015 9:20 pm
Forum: General
Topic: L2TP/Ipsec not working sometimes. First L2TP UDP packet received from.....
Replies: 6
Views: 6046

Re: L2TP/Ipsec not working sometimes. First L2TP UDP packet received from.....

Ok. Thank you for your answer. I was waiting this king of answer. I will try to setup the modem/router in the server SIDE (fiber optic) to bridge and try to get the IP on the mikrotik. In my house, I can't change anything, the IP is in the modem.... or maybe, or far away.... In the Office B (telefon...
by hgonzale
Fri Jun 26, 2015 8:57 pm
Forum: General
Topic: divide internet speed over clients dynamicly
Replies: 2
Views: 587

Re: divide internet speed over clients dynamicly

You need a Pcq queue.

If you not set the rate, if ther is just one pc, it will get the maximum from the parent queue. If you have two... You will get the halt for each one.

If you set the rate, is the same but each Pc won't get more than RATE param.
by hgonzale
Fri Jun 26, 2015 8:46 pm
Forum: General
Topic: L2TP/Ipsec not working sometimes. First L2TP UDP packet received from.....
Replies: 6
Views: 6046

Re: L2TP/Ipsec not working sometimes. First L2TP UDP packet received from.....

Main office (ISP A): fiber optic connection. Is a modem/router receiving the fiber, and DMZ to the mikrotik. The Public IP is in THIS router but a DMZ to the mikrotik. Just the mikrotik connected to router with the fiber. Here sometimes 1/3, 2/3 connections or if I am lucky 3/3 My house (ISP B): sat...
by hgonzale
Fri Jun 26, 2015 1:47 am
Forum: General
Topic: L2TP/Ipsec not working sometimes. First L2TP UDP packet received from.....
Replies: 6
Views: 6046

Re: L2TP/Ipsec not working sometimes. First L2TP UDP packet received from.....

Now, My house is connected and remote side 2 too (about 10 minutes ago the office 2 connected). Just the 3 is NOT connected... Now the debug jun/26 00:27:57 dhcp,debug,packet default received request with id 772271661 from 192.168.1.77 jun/26 00:27:57 dhcp,debug,packet flags = broadcast jun/26 00:27...
by hgonzale
Fri Jun 26, 2015 12:25 am
Forum: General
Topic: L2TP/Ipsec not working sometimes. First L2TP UDP packet received from.....
Replies: 6
Views: 6046

L2TP/Ipsec not working sometimes. First L2TP UDP packet received from.....

Hello, my friends. I will explain my situation I have a place with 200/100 Mbps bandwidth (main office). I have here a 750GL router doing VPN server for 3 locations (now 3, 4 next week). But sometimes, I loose the connection from 1, 2 or the 3 locations, but is aleatory. sometimes the connection is ...
by hgonzale
Thu May 28, 2015 8:10 pm
Forum: Announcements
Topic: hAP lite
Replies: 389
Views: 164128

Re: hAP lite

It is working perfectly with this

You can do traffic shapping, priorities, L7, VPN (I am using one for IPSEC/L2TP client),
by hgonzale
Thu May 28, 2015 1:56 pm
Forum: Beginner Basics
Topic: Support in Lithuania
Replies: 1
Views: 421

Re: Support in Lithuania

Can you contact me in private my friend?
by hgonzale
Fri May 22, 2015 9:35 pm
Forum: Announcements
Topic: hAP lite
Replies: 389
Views: 164128

Re: hAP lite

Hello, I received today my first 2 Lite Router, for deploying in a home/house. for me is a good router, but you need to think... is the cheapest mikrotik router and you can´t compare to another, and yes, it´s running RouterOS but a small version, you can do traffic shapping, but if you are asking ab...
by hgonzale
Thu May 14, 2015 10:48 am
Forum: General
Topic: Simple QOS for VOIP
Replies: 2
Views: 11740

Re: Simple QOS for VOIP

There are many ways to do. Here my examples, BUT, I know my IP phones IP address. You can match with dest-port (5060), dest-ip (sip servers)..... at mangle add action=mark-connection chain=prerouting comment="VoIP Mark" new-connection-mark=VoIP src-address-list=sip-internos add action=mark-connectio...
by hgonzale
Thu May 14, 2015 10:42 am
Forum: General
Topic: How to buy license Level 3
Replies: 4
Views: 1015

Re: How to buy license Level 3

I can find at 33 Eur the licence L4, is a great price. And is better than L3
by hgonzale
Tue May 05, 2015 7:07 pm
Forum: Wireless Networking
Topic: Mikrotik Groove with very low RX signal
Replies: 5
Views: 1588

Re: Mikrotik Groove with very low RX signal

Hello again... today, looking in internet, I found this: http://wiki.mikrotik.com/wiki/Manual:Wi ... d_antennas

and my antena, the TPLink 15 dBi omni is NOT shorted, is OPEN. Do I need a lightning arrestor ?

Is my first time I listen it
by hgonzale
Tue Apr 28, 2015 10:50 pm
Forum: Wireless Networking
Topic: Isolate Wi-Fi
Replies: 10
Views: 1884

Re: Isolate Wi-Fi

1.- dont use the same bridge for both network

You need to create a new network for the Wireless, setup a DHCP server, and NAT
Add a rule for just allowing to see the gateway and forbidden the others IP on the LAN
by hgonzale
Tue Apr 28, 2015 8:13 pm
Forum: Wireless Networking
Topic: Mikrotik Groove with very low RX signal
Replies: 5
Views: 1588

Re: Mikrotik Groove with very low RX signal

Thank you my friend.
It didn´t run for long time, maybe for short time (seconds) for testing.
I received some equipment the same day, and I plugged some for testing that it power up, just it.

Another idea? Thank you
by hgonzale
Tue Apr 28, 2015 3:33 pm
Forum: Wireless Networking
Topic: Mikrotik Groove with very low RX signal
Replies: 5
Views: 1588

Re: Mikrotik Groove with very low RX signal

I didn´t. Maybe few seconds for checking the power, but never more that 20 secs.....
Could it damage it? (is just a question)
by hgonzale
Tue Apr 28, 2015 1:33 pm
Forum: Wireless Networking
Topic: Mikrotik Groove with very low RX signal
Replies: 5
Views: 1588

Mikrotik Groove with very low RX signal

I bought a Mikrotik Groove 52Hpn L3 and I did the upgrade to L4, now it could be an AP. I had a TP Link 15 dB omni antenna.. Now I am doing test and I am getting very low performance, disconnections and many issues because the RX sensitivity for all device is very very low. The antenna is working pe...
by hgonzale
Thu Jan 08, 2015 4:25 pm
Forum: General
Topic: Looking for wireless solution Mikrotik / Ubiquiti
Replies: 11
Views: 1850

Re: Looking for wireless solution Mikrotik / Ubiquiti

Look the Ubiquiti PicoStation HP (high Power), configure like US and you will enjoy the wirelesss coverage.
by hgonzale
Mon Jan 05, 2015 5:37 pm
Forum: General
Topic: Hardware Recommendation to start a WISP with 100 Subscriber
Replies: 8
Views: 1311

Re: Hardware Recommendation to start a WISP with 100 Subscri

Because will be many questions, re questions, and after I get everything I will post resume and not many stupid post. But you can do it. And sometime, I ask personal information, like locations, purchase location and some people doesn't like to put in a public forum but for me, wherever
by hgonzale
Mon Jan 05, 2015 1:59 pm
Forum: General
Topic: Hardware Recommendation to start a WISP with 100 Subscriber
Replies: 8
Views: 1311

Re: Hardware Recommendation to start a WISP with 100 Subscri

Yes my friend, but skynet didn't contact me. You are free to write me in private about your project
by hgonzale
Mon Jan 05, 2015 10:13 am
Forum: General
Topic: Hardware Recommendation to start a WISP with 100 Subscriber
Replies: 8
Views: 1311

Re: Hardware Recommendation to start a WISP with 100 Subscri

After talking him. I need to ask about the budged, customers distance, main speed, customers speed, exact location (for calculation equipment requirement, antenna gain, customers equipments, fresznel zone), mikrotik involved. After I get this information, I will do a public recommendation here. (I w...
by hgonzale
Sun Jan 04, 2015 6:20 pm
Forum: General
Topic: Hardware Recommendation to start a WISP with 100 Subscriber
Replies: 8
Views: 1311

Re: Hardware Recommendation to start a WISP with 100 Subscri

Please contact me In Private. Is very long to talk here. After we could post the results for everyone.
by hgonzale
Sat Dec 27, 2014 9:25 pm
Forum: General
Topic: Wifi coverage - MikroTik or Ubiquiti
Replies: 4
Views: 2732

Re: Wifi coverage - MikroTik or Ubiquiti

My friend, remember a wireless communication is a conversation between TWO. You can buy a very powerful AP but is the second device doesn't have enough power to reach the AP, you arent doing anything. In fact, I will recommend you a very good,cheap, powerful and sensitive AP but it doesn't do all al...
by hgonzale
Sat Dec 27, 2014 9:15 pm
Forum: General
Topic: Simple queue o Queue Tree + pcq OS v6.x
Replies: 6
Views: 15657

Re: Simple queue o Queue Tree + pcq OS v6.x

Hola amigo, yo haría una combinación de los tres. Simple queue para el control máximo de velocidad por ip o por grupo. Queue tree para el control de servicios y prioridades, por ejemplo darle prioridad y CIR a el Voip, o restringir al mínimo o eliminar el p2p, priorizar en medio el www, mas priorida...
by hgonzale
Tue Dec 16, 2014 10:53 am
Forum: General
Topic: Simple Queues non counting Tx/Rx/total Bytes
Replies: 0
Views: 571

Simple Queues non counting Tx/Rx/total Bytes

I know the problem with the default-small queues not counting the bytes for stats, but, since yesterday, after I upgraded to 6.23, my simple queues are not counting the tx/rx bytes if I am NOT watching it. For example, yesterday in the night, I switched off my computer and close the winbox, the stat...
by hgonzale
Tue Dec 16, 2014 10:44 am
Forum: General
Topic: Please help choosing the right RouterBoard for small network
Replies: 9
Views: 1169

Re: Please help choosing the right RouterBoard for small net

Ohhh yes, really, the 950 (non wireless), 951 (wireless) or just, the 750 is enough for 50 users and some simple queues and queue tree.
by hgonzale
Tue Dec 16, 2014 10:42 am
Forum: General
Topic: Question about a good router for wifi
Replies: 3
Views: 722

Re: Question about a good router for wifi

If you want a simple Router/AP, I recommend the Ubiquiti PicoStation, but if you want more than a simple Router, the 751 or 951 with H (high power)
by hgonzale
Mon Dec 08, 2014 7:26 pm
Forum: Beginner Basics
Topic: /32 WAN IP
Replies: 8
Views: 1881

Re: /32 WAN IP

I think is a term confusion. All IPs are /32, it means that ip ip is just ONE ip, but the network around must be at lest /30 for getting 4 IP, 1 for network address, one for the gateway, one for you and one for the broadcast. The example above is: my ip is 1.1.1.1 because the /32 means that (I think...
by hgonzale
Sun Dec 07, 2014 11:19 pm
Forum: RouterBOARD hardware
Topic: US Friendly Power Adapters - EU Distributor Required
Replies: 4
Views: 1192

Re: US Friendly Power Adapters - EU Distributor Required

I am Venezuelan living in Spain right now. In my country (Venezuela) like many other American countries we use the American Plugs (A and B). I had/have the same problem, bringing equipment here, and when I travel to America.... Maybe, my personal recomendation, and is better (I think so) is to but t...
by hgonzale
Thu Dec 04, 2014 4:50 pm
Forum: Wireless Networking
Topic: Wireless Connection Problem
Replies: 11
Views: 1757

Re: Wireless Connection Problem

Has you tried the software Insidder to look the frequency usage and channel size?
by hgonzale
Mon Dec 01, 2014 11:36 pm
Forum: General
Topic: need help
Replies: 5
Views: 848

Re: need help

It looks very good. I love this design. I dont know if you have bandwidth control, priorities and something else. But this is a normal setup for that.
by hgonzale
Mon Dec 01, 2014 9:54 pm
Forum: Beginner Basics
Topic: vpn to netflix on ps3/ipad
Replies: 2
Views: 704

Re: vpn to netflix on ps3/ipad

You can create a static route to the VPN from the PS3 IP (fixed IP) to the VPN, and the rest.. outside that route, I am doing something like that
by hgonzale
Sun Nov 30, 2014 4:43 pm
Forum: Wireless Networking
Topic: PtP 70 Km
Replies: 2
Views: 968

Re: PtP 70 Km

I dont understand you question, and in the profile you have a "mountain shadow", what is this?

Did you think about the earth curvature? You need add this height in both sides., not just the fressnel zone.

For 70 Km, you need to ADD over the fressnel zone 291 feets.
by hgonzale
Fri Nov 28, 2014 2:24 pm
Forum: General
Topic: Can not Restore a Backup file
Replies: 7
Views: 19898

Re: Can not Restore a Backup file

If you leave an empty password, but you use encryption, the password is the encryption password (you password for admin access at moment of creating the backup).

you must use at least the same version for recover it.
by hgonzale
Wed Nov 26, 2014 10:34 pm
Forum: General
Topic: share internet in with wifi
Replies: 3
Views: 913

Re: share internet in with wifi

The gateway should´t be in the bridge
by hgonzale
Wed Nov 26, 2014 10:32 pm
Forum: General
Topic: share internet in with wifi
Replies: 3
Views: 913

Re: share internet in with wifi

Had you added the wireless interface to your local bridge?

add bridge=bridge-local interface=wlan1
add bridge=bridge-local interface=ether2-master-local
by hgonzale
Wed Nov 26, 2014 5:06 pm
Forum: General
Topic: Queue tree and prorities
Replies: 1
Views: 603

Queue tree and prorities

I am reading and practicing about queue tree and PARENTS.... Before today, I always used a linear QUEUE TREE, with put parent, just the interfaces... But the best of grouping in PARENTS is because you can group together de bandwidth for a group of rules.... but I have a question.... If a create a pa...
by hgonzale
Wed Nov 26, 2014 4:14 pm
Forum: Beginner Basics
Topic: Congestioned WAN
Replies: 0
Views: 452

Congestioned WAN

I read about the queues, priorities and something else... I understood that... the priority queues START working when the bandwidth is insufficient. when your request are bigger than the bandwidth available.. Then.. i have 2 questions. 1.- how the routerOs does now when the bandwidth is insufficient...
by hgonzale
Wed Nov 26, 2014 2:45 pm
Forum: General
Topic: VPN from Kazakhstan
Replies: 5
Views: 1609

Re: VPN from Kazakhstan

My friend. You can test almost everything from your placer before sending the router and the modem..... but...... you need to configure the APN before leaving. APN is mandatory to setup, because is the configuration for the internet-gateway of the SIM. You need to know the provider and the APN name ...
by hgonzale
Wed Nov 26, 2014 2:35 pm
Forum: General
Topic: mark-connection VS mark-packet
Replies: 28
Views: 63785

Re: mark-connection VS mark-packet

Hello friends... I am a little newbie using mikrotik and I think I am doing good policies for traffic shaping and prioritize the traffic. I am doing a double mark, first I mark the connection, and after I mark the packet with the connection name. Is it correct? Here, some examples about my rules.......
by hgonzale
Tue Nov 25, 2014 11:35 pm
Forum: General
Topic: Server for Netflix and rules for mangling
Replies: 0
Views: 1267

Server for Netflix and rules for mangling

Her,e a post for mangle the connection to Netflix server. This a mangle, after you can prioritize, bursts, and everything. add action=mark-connection chain=prerouting comment="Netflix Mark" dst-address=198.38.96.0/19 new-connection-mark="Netflix US" src-address=\ 192.168.10.0/24 add action=mark-conn...
by hgonzale
Tue Nov 25, 2014 2:44 pm
Forum: General
Topic: How much Bandwidth is required? [WISP]
Replies: 16
Views: 3781

Re: How much Bandwidth is required? [WISP]

I write an answer but it disappear. Trying to write again: You need to be very conservative and install a bg one proxy cache for web. It must be faster than going directly to the web Second, use cache server dns in the same server. Not queries about DNs outside. Redirect the outgoing traffic to 53 t...
by hgonzale
Tue Nov 25, 2014 11:43 am
Forum: General
Topic: How much Bandwidth is required? [WISP]
Replies: 16
Views: 3781

Re: How much Bandwidth is required? [WISP]

Wow very expensive.
Talking about the proxy I recommend a Linux with squid in a good server with proxy redirection for automatic usage.
by hgonzale
Tue Nov 25, 2014 1:49 am
Forum: General
Topic: How much Bandwidth is required? [WISP]
Replies: 16
Views: 3781

Re: How much Bandwidth is required? [WISP]

The price? Depends of the country. Here in Spain you can get 200 Mbps si metrical for about 50 US$ ( http://www.jazztel.com/internet/fibra-no-clientes.html#.VHPC22t5mK0 press OFERTAS) you will see 200 Mbps 30 Eur. And the others friends are in the true. but you must do a SUM for your CIR customers, ...
by hgonzale
Mon Nov 24, 2014 11:28 pm
Forum: General
Topic: How much Bandwidth is required? [WISP]
Replies: 16
Views: 3781

Re: How much Bandwidth is required? [WISP]

I would do it with 100 Mbps symmetrical. Good rules for low priority and bandwidth for p2p, priority for web and VoIP and a BIG one cache system.
by hgonzale
Mon Nov 24, 2014 10:15 pm
Forum: General
Topic: My Internet provider have a "connections limit"..
Replies: 12
Views: 2739

Re: My Internet provider have a "connections limit"..

I still think... Is a modem problem... because, NOW: 21:13 in Spain... is my PEAK hour, now, all my "customers" are using the internet, two neighbors watching tv, all using p2p... I have now 3140 current connections. In house there is about 7 device using the same internet too. Is slow, and the simp...
by hgonzale
Mon Nov 24, 2014 1:40 pm
Forum: General
Topic: My Internet provider have a "connections limit"..
Replies: 12
Views: 2739

Re: My Internet provider have a "connections limit"..

Oh yes, I understand your situation my friend. I think hylas is available too in Syria, maybe Hylas 2. I will check. Second, I think you have a problem in the modem, because I have so many connections active and my modems (3 with unlimited packages and serving many people) don´t have this problem. D...
by hgonzale
Mon Nov 24, 2014 1:42 am
Forum: General
Topic: My Internet provider have a "connections limit"..
Replies: 12
Views: 2739

Re: My Internet provider have a "connections limit"..

Is expensive. I pay 99 eur for the "unlimited" hehehe Where are you? 4 tooway with 60 GB each one? I know the old packages: " Gb, 10 Gb, 20 GB and 50 Gb, and the new ones: 25 GB and 100 Gb. But the Viasat modem support many connections. In all new Sat connections (Hylas, YaClick, Exede, Tooway) ther...