Community discussions

MikroTik App

Search found 469 matches

  • 1
  • 2
by spippan
Mon Apr 08, 2024 12:33 am
Forum: General
Topic: WireGuard QR-Code-Generator messed up! (v7.12.1) [SOLVED]
Replies: 3
Views: 320

Re: WireGuard QR-Code-Generator messed up! (v7.12.1) [SOLVED]

had the same issue on winbox
switching over to create peers via CLI (SSH or terminal window in winbox) solved this for me
by spippan
Sun Mar 17, 2024 7:54 pm
Forum: General
Topic: Network discovery over wireguard
Replies: 33
Views: 4707

Re: Network discovery over wireguard

I prefer my approach.
Not that much words. :lol:
and also can be quite dangerous if your STP goes nuts then ...
by spippan
Sun Mar 10, 2024 5:19 pm
Forum: Announcements
Topic: MikroTik Devices Controller
Replies: 332
Views: 237536

Re: MikroTik Devices Controller

Just checking in... MDC still "cancelled" with no whisper of any viable replacement/work for Dude either (since it hasn't been touched since 6.42 and Mikrotik decided to actively not migrate the wiki content for it to the new help site)? I'm so heavily invested in Mikrotik, but I feel lik...
by spippan
Thu Mar 07, 2024 12:38 am
Forum: Wireless Networking
Topic: Problems aiming nRAY [SOLVED]
Replies: 15
Views: 1122

Re: Problems aiming nRAY [SOLVED]

Start with a rough alignment by eye Log into both radios, open terminal and manually set tx-sector=36 in order to disable beamforming. And if the range is >400m the use 64800 for the frequency. And you'll want the solidmount Then type in 'align 0' to enter alignment mode and give a real-time readou...
by spippan
Wed Mar 06, 2024 8:31 pm
Forum: Announcements
Topic: v7.14.2 [stable] is released!
Replies: 553
Views: 125489

Re: v7.14 [stable] is released!

How do i delete loop back interface? i am not interested in
it was, is and always will be there
now MT is just exposing it to use it.

what is all the struggle with a Lo available? don't get it.
by spippan
Wed Mar 06, 2024 8:24 pm
Forum: General
Topic: RB5009 as Mediaconverter for other router.
Replies: 4
Views: 342

Re: RB5009 as Mediaconverter for other router.

absolutely viable have 2 4011 in that configuration and it works quite well. those 2 4011 are installed temporarily to insert a "tap point" for a POC setup for a palo alto IDS/IPS solution. working transparently and at wirespeed so far so 5009 surely will handle the load just create a brid...
by spippan
Mon Mar 04, 2024 10:52 pm
Forum: RouterOS beta
Topic: v7 inter VRF route leak doesn't work for local IPs
Replies: 38
Views: 12687

Re: v7 inter VRF route leak doesn't work for local IPs

Hi, you mean that you can now ping local gateway between leaked VRF imported via MBGP ? I'm not able to get this working, could you please send your working config ? Thanks ! no i meant reachability between clients in different VRFs e.g. "ClientA" in VFR "RED" can reach "Cl...
by spippan
Mon Mar 04, 2024 10:47 pm
Forum: General
Topic: Feature requests
Replies: 1741
Views: 636262

Re: Feature requests

+1 HA clustering with configuration preferably on the main node and config sync (like CARP from opnsense)
by spippan
Thu Feb 29, 2024 12:12 am
Forum: Announcements
Topic: v7.13.5 [stable] is released!
Replies: 909
Views: 263911

Re: v7.13.5 [stable] is released!

... I've seen a lot worse coming from other persons and I've worked with A LOT of nationalities during my career. ... haha exactly. ever dealt with Cisco TAC? most of the time you get connected to someone in india or bosnia ... good luck with that. had my fair share with them and now really like to...
by spippan
Wed Feb 28, 2024 11:58 pm
Forum: Wireless Networking
Topic: Wireless Wire Cube (Preconfigured) Plug 'n' Play...Doesn't [SOLVED]
Replies: 15
Views: 1191

Re: Wireless Wire Cube (Preconfigured) Plug 'n' Play...Doesn't [SOLVED]

jaclaz, Thank you for your reply! It is an older Win 10 laptop, and the first thing I did was turn off the its built-in WiFi; I will check the firewall and try again. Should these cubes have worked straightaway? One of the reasons I chose the preprogrammed units was so I wouldn't have to tackle a n...
by spippan
Wed Feb 28, 2024 11:02 pm
Forum: Announcements
Topic: v7.13.5 [stable] is released!
Replies: 909
Views: 263911

Re: v7.13.5 [stable] is released!

...and obviously written without the required English skills. OT but stating that and than write "peopleS" more than once ... quite a shot to the knee i might add ;) PS: MT started as a wireless and routing software company and are fairly young in switching-business. one of the hardest ce...
by spippan
Mon Feb 26, 2024 10:03 pm
Forum: Announcements
Topic: SwOS version 2.16 released!
Replies: 45
Views: 33125

Re: SwOS version 2.16 released!

tried resetting the switch to default and then update?
by spippan
Mon Feb 26, 2024 8:36 pm
Forum: Announcements
Topic: SwOS version 2.16 released!
Replies: 45
Views: 33125

Re: SwOS version 2.16 released!

I tried to upgrade a CSS106-5G-1S withou succes .... the webinterface says upgrade availiable. I enter upgrade, it says wait and than "ERROR: Upgrade failed" webinterface is unreachable, all traffic seems to be working. powercycling brings the device back the device in its original state ...
by spippan
Mon Feb 26, 2024 8:34 pm
Forum: Beginner Basics
Topic: Simple home MESH.
Replies: 15
Views: 13732

Re: Simple home MESH.

ever took a look into mikrotik mesh functinality? (i am not talking about any of AC/AX roaming extensions)
mesh.png
by spippan
Mon Feb 26, 2024 8:16 pm
Forum: General
Topic: MLAG hopelessly broken?
Replies: 20
Views: 4925

Re: MLAG hopelessly broken?

EDIT : i just gave you alternatives RIGHT above your post if you are on a budget ... fs.com S5850 or N5860. i would recommend the N definitely heavier on the price tag than mikrotik but quite solid switches but they work quite well. Those switches are 7x more expensive than the MikroTiks :shock: ye...
by spippan
Fri Feb 23, 2024 1:15 pm
Forum: General
Topic: MLAG hopelessly broken?
Replies: 20
Views: 4925

Re: MLAG hopelessly broken?

Easy. Don't use mikrotik! What else then? EDIT : i just gave you alternatives RIGHT above your post if you are on a budget ... fs.com S5850 or N5860. i would recommend the N definitely heavier on the price tag than mikrotik but quite solid switches if budget is no concern you could go with juniper ...
by spippan
Fri Feb 23, 2024 1:10 pm
Forum: General
Topic: UDP faster than TCP - why?
Replies: 4
Views: 484

Re: UDP faster than TCP - why?

first and foremost tcp has more overhead and is "connection oriented" here are 2 good basic comparisons to understand TCP and UDP a bit more. https://www.spiceworks.com/tech/networking/articles/tcp-vs-udp/ https://www.mathworks.com/help/instrument/tcpip-and-udp-comparison.html IP traffic y...
by spippan
Tue Feb 20, 2024 10:49 pm
Forum: Announcements
Topic: v7.13.5 [stable] is released!
Replies: 909
Views: 263911

Re: v7.13 [stable] is released!

RB1100dx4de reboots after few seconds, no supout.rif created, no time needed to do this.
Same router, all working ok for me, no issue.
have the same one - will have a look how mine behaves this or next week
by spippan
Sun Feb 18, 2024 8:44 pm
Forum: RouterOS beta
Topic: v7 inter VRF route leak doesn't work for local IPs
Replies: 38
Views: 12687

Re: v7 inter VRF route leak doesn't work for local IPs

@spippan There must have been a change in 7.14beta10 maybe the following line? *) route - fixed gateways of locally imported vpnv4 routes; I can now ping endpoints between different VRFs using the route import/export. I can't ping another VRFs gateway address but I can ping hosts on other VRFs it i...
by spippan
Tue Feb 13, 2024 2:02 pm
Forum: RouterOS beta
Topic: v7 inter VRF route leak doesn't work for local IPs
Replies: 38
Views: 12687

Re: v7 inter VRF route leak doesn't work for local IPs

@spippan

Let me understate, the issue that you are expiring, is that you are not able to learn the route between different VRFs
that was the problem at first yes. which now works as far as VRFs get to learn imported routes (via RD)

have a look at post #28
(EDIT: added link to post#28)
by spippan
Tue Feb 13, 2024 1:59 pm
Forum: General
Topic: Is Mikrotik RB2011UiAS too old for Wireguard? [SOLVED]
Replies: 8
Views: 1126

Re: Is Mikrotik RB2011UiAS too old for Wireguard? [SOLVED]

have two online with a S2S wireguard VPN to my RB1100AHx4
no problems regarding support for WG

(keep in mind to not expect big performance numbers there ;) )
by spippan
Tue Feb 13, 2024 1:54 pm
Forum: General
Topic: Feature requests
Replies: 1741
Views: 636262

Re: Feature requests

I don't know about that. I'd think some mDNS support be more useful, than a print server, in 2024? Indeed! This is just a general "VPN setup in the wrong way" issue. Put your VPN range in a different IP range and it all works fine. Maybe the "automatic discovery of the printer" ...
by spippan
Thu Feb 08, 2024 1:11 am
Forum: Announcements
Topic: v7.14beta [testing] is released!
Replies: 510
Views: 153671

Re: v7.14beta [testing] is released!

What's new in 7.14beta10 (2024-Feb-06 15:47): !) rose-storage - moved SMB service in the RouterOS bundle; !) smb - removed legacy SMB service (replaced with newer and faster ROSE SMB service); *) arp - added ARP status; *) console - improved stability when using autocomplete with "export"...
by spippan
Wed Feb 07, 2024 1:50 am
Forum: Announcements
Topic: Newsletter #116 | January 2024
Replies: 93
Views: 30657

Re: Newsletter #116 | January 2024

For 2x the price I would be happy. I bought a 4011 for 2x the price of a L009 but I get an orphaned device. And it is still being sold today! 300 euro for a 5011 with specs as I hinted would be a good deal. i would also be fine with such a device. currently running a 1100AHx4 DE so a smaller device...
by spippan
Tue Feb 06, 2024 4:55 am
Forum: Announcements
Topic: Newsletter #116 | January 2024
Replies: 93
Views: 30657

Re: Newsletter #116 | January 2024

Actually, not that many. There is no real product "for the higher-end home user" with 8+ switch ports and modern WiFi. The 4011 is not well supported, the 5009 has no WiFi, the hAP ax3 has too few switchports. I think you should make a successor to the 4011 (the 5011?) that has fully supp...
by spippan
Tue Feb 06, 2024 1:14 am
Forum: General
Topic: Feature requests
Replies: 1741
Views: 636262

Re: Feature requests

Please make dynamic vlan assignment possible for wifi-qcom-ac wireless driver
do you mean via RADIUS?
by spippan
Tue Feb 06, 2024 1:06 am
Forum: RouterBOARD hardware
Topic: Switch with two SFP port [SOLVED]
Replies: 12
Views: 1853

Re: Switch with two SFP port [SOLVED]

got me a CSS610-8G-2S+ and was disappointed at first because the SwOS it came with was ... yeah BAD mildly said BUT ... then there came an update 2.17 (built at Wed Aug 16 2023 08:57:30 GMT+0200 (Central European Summer Time)) and now this switch is really in use and runs without any major flaws or ...
by spippan
Thu Feb 01, 2024 3:36 am
Forum: General
Topic: Feature requests
Replies: 1741
Views: 636262

Re: Feature requests

imagine a world/dimension where there is routeros feature richness and customizability and a GUI like from that "UB.." company
by spippan
Thu Feb 01, 2024 12:43 am
Forum: General
Topic: Monitoring and Trafficflow
Replies: 9
Views: 1245

Re: Monitoring and Trafficflow

i am looking for a free collector which will get fed by mikrotik routers and should forward to "ntopng" will have a look into ipfixcol2 I have used https://github.com/synfinatic/netflow2ng as a free alternative to nProbe to feed to ntopng with great success. that is great news to hear. ne...
by spippan
Wed Jan 31, 2024 1:47 am
Forum: General
Topic: Monitoring and Trafficflow
Replies: 9
Views: 1245

Re: Monitoring and Trafficflow

If you don't care about details but just traffic, observium!
has Observium a collector in it?

i am looking for a free collector which will get fed by mikrotik routers and should forward to "ntopng"
will have a look into ipfixcol2
by spippan
Tue Jan 30, 2024 10:22 pm
Forum: SwOS
Topic: from network to network without a gateway
Replies: 4
Views: 902

Re: from network to network without a gateway

i reckon OP might need some help to configure INTER-VLAN ROUTING on his switch maybe i do not know if a CSS could do that. on a CRS326 it is absolutely possible and i also installed a setup at a friends home with his CRS326 but it is not q point-and-click beginner easy setup if one does not understa...
by spippan
Tue Jan 30, 2024 9:52 pm
Forum: General
Topic: Feature Request: webfig dark theme
Replies: 7
Views: 684

Re: Feature Request: webfig dark theme

both
winbox dark theme support +1
webfig dark theme support +1
by spippan
Tue Jan 30, 2024 9:29 pm
Forum: General
Topic: Feature requests
Replies: 1741
Views: 636262

Re: Feature requests

If the router does not have a public IP address (4G connection), all traffic is routed through MikroTik servers, right?
no. why would you think that?
by spippan
Mon Jan 29, 2024 7:33 pm
Forum: Announcements
Topic: v7.14beta [testing] is released!
Replies: 510
Views: 153671

Re: v7.14beta [testing] is released!

can we get more info about : *) bgp - allow to leak routes between local VRFs; how that works? there is a topic on that. also i spotted the current behaviour in v7.4 but it disappeared and now is back again. leak from VRF to VRF somehow starts to exchange routing information but forwarding still is...
by spippan
Mon Jan 29, 2024 7:31 pm
Forum: Announcements
Topic: v7.14beta [testing] is released!
Replies: 510
Views: 153671

Re: v7.14beta [testing] is released!

MikroTik_RouterOSv7.14beta8_BGP_RouteLeak_VRF.png

Hurrah!

E interact with MikroTik devices since 2007-2008...
And Just now... But it is a beginning.

Now we need to check if the behavior is correct with L3VPN / IPv6...
viewtopic.php?t=181846#p1051300
by spippan
Sat Jan 27, 2024 6:44 pm
Forum: Scripting
Topic: how to get local-address in pppoe client
Replies: 4
Views: 6684

Re: how to get local-address in pppoe client

maybe this helps: i also tested something on ROSv7.12.1 ("VDSL-A1-02" is the name of the pppoe-client connection) :global PPPoE02 [/interface/pppoe-client/monitor VDSL-A1-02 as-value once ] :global PPPoE02 ($PPPoE02 -> "local-address") and i got the correct local-address of that ...
by spippan
Fri Jan 26, 2024 2:03 pm
Forum: Forwarding Protocols
Topic: Status of ROS V7 for BGP, MPLS, VPLS
Replies: 70
Views: 12346

Re: Status of ROS V7 for BGP, MPLS, VPLS

- There are no known problems with VPNv4 and route reflectors. There is a known/not yet fixed problem with VPLS and route reflectors.
do you consider not being able to leak routes properly between local VRFs (bgp-vpnv4 local) "no known problems"?
by spippan
Wed Jan 24, 2024 2:27 pm
Forum: RouterOS beta
Topic: v7 inter VRF route leak doesn't work for local IPs
Replies: 38
Views: 12687

Re: v7 inter VRF route leak doesn't work for local IPs

and it does not work. despite there are routes to 192.168.10.0/24 in VRF20 and VRF30 clients in either of these VRFs can reach any 192.168.10.x/24 IP [admin@RT1] > export hide-sensitive # 2024-01-24 12:19:25 by RouterOS 7.14beta8 # software id = # /interface vlan add interface=ether1 name=ether1.100...
by spippan
Wed Jan 24, 2024 11:46 am
Forum: RouterOS beta
Topic: v7 inter VRF route leak doesn't work for local IPs
Replies: 38
Views: 12687

Re: v7 inter VRF route leak doesn't work for local IPs

What's new in 7.14beta8 (2024-Jan-22 21:07):

*) bgp - allow to leak routes between local VRFs;

YES. tests will follow
by spippan
Sat Jan 20, 2024 5:15 pm
Forum: RouterOS beta
Topic: v7 inter VRF route leak doesn't work for local IPs
Replies: 38
Views: 12687

Re: v7 inter VRF route leak doesn't work for local IPs

answer to SUP-138970
it will come in future releases. up until now, no time information WHEN though
by spippan
Sat Jan 13, 2024 7:02 pm
Forum: RouterOS beta
Topic: v7 inter VRF route leak doesn't work for local IPs
Replies: 38
Views: 12687

Re: v7 inter VRF route leak doesn't work for local IPs

it somehow worked in v7.4
even the static route in VRF10 got redistributed to VRF20 and VRF30
interVRF-ROS7.4.png.png


as soon as i go e.g. to 7.12.1 it stops working:
interVRF-ROS7.12.1.png
by spippan
Tue Jan 09, 2024 10:40 pm
Forum: General
Topic: Authentication with VRRP doesn't work
Replies: 8
Views: 1439

Re: Authentication with VRRP doesn't work

what would be a possible solution to protect VRRP e.g. on a WAN link where the VRRP member IP addresses are public IPs? VRRP uses non-routable multicast, so only the ISP router if /29 is bridged could even get involved – not some random host on the internet. You can block protocol=vrrp in the bridg...
by spippan
Tue Jan 09, 2024 1:58 pm
Forum: General
Topic: Authentication with VRRP doesn't work
Replies: 8
Views: 1439

Re: Authentication with VRRP doesn't work

I use VRRP in most deployments, but never with authentication: since if VRRP fails, you now have an outage/issues — the idea of VRRP is avoid downtime. And just take comfort in the RFC don't recommend it. Perhaps "simple" may be enough? IMO that does prevent accidental misconfiguration on...
by spippan
Tue Jan 09, 2024 1:31 pm
Forum: Announcements
Topic: v7.13.5 [stable] is released!
Replies: 909
Views: 263911

Re: v7.13.1 [stable] is released!

@infabo

MT could just strip that "noise" entries and just write at the end of changelog:
*) misc fixes and improvements
that would make it even MORE vague.
by spippan
Mon Jan 08, 2024 2:42 pm
Forum: Announcements
Topic: v7.13.5 [stable] is released!
Replies: 909
Views: 263911

Re: v7.13 [stable] is released!

Very interesting...


Image
where did you get that from? would like to bookmark that. and also have a friend who might need that soon
by spippan
Mon Jan 08, 2024 2:02 pm
Forum: General
Topic: Torch not capture the traffic
Replies: 6
Views: 2064

Re: Torch not capture the traffic

in protocol also use "any" and for the time torch is running, disable fast-tracking
by spippan
Sun Dec 31, 2023 5:35 pm
Forum: Announcements
Topic: v7.14beta [testing] is released!
Replies: 510
Views: 153671

Re: v7.14beta [testing] is released!

Excuse my ignorance, could you be more specific or put the complete scripts?
/system logging set [find where topics="info"] topics=info,!wireguard
by spippan
Sat Dec 30, 2023 5:03 pm
Forum: Wireless Networking
Topic: VLAN Trunk over WiFi for SOHO networks - use EoIP or else?
Replies: 6
Views: 1848

Re: VLAN Trunk over WiFi for SOHO networks - use EoIP or else?

instead of using EoIP, use VxLAN (less overhead) but way better to achieve the link as stated by others ... use PtP 60GHz i maintain some of these type of links at work and they are quite a no-brainer once aligned correctly for links below ~200m and easy alignment - wAP 60G is your friend otherwise ...
by spippan
Sat Dec 30, 2023 4:54 pm
Forum: Announcements
Topic: v7.14beta [testing] is released!
Replies: 510
Views: 153671

Re: v7.14beta [testing] is released!

Hi, When installing the latest beta 7.14beta4 I got these messages on a wireguard road warrior connection, with the stable 7.13 (and earlier) it didn't happen: wg-rw: XN58CdM6ppiSQpDaQT0bh1IMYgUP0czYYY92N1IBwE3c=: Handshake for peer did not complete after 5 seconds, retrying (try 2). When I connect...
by spippan
Sat Dec 30, 2023 4:48 pm
Forum: RouterOS beta
Topic: v7 inter VRF route leak doesn't work for local IPs
Replies: 38
Views: 12687

Re: v7 inter VRF route leak doesn't work for local IPs

Excuse me, but that means that the functionality is only starting with 7.14 or that there is (was) another method working on previous releases? If the latter, can you post the corresponding example with the "old" method? Maybe it is just me, but 7.14 is still a bit too new/experimental to...
by spippan
Fri Dec 29, 2023 8:52 pm
Forum: RouterOS beta
Topic: v7 inter VRF route leak doesn't work for local IPs
Replies: 38
Views: 12687

Re: v7 inter VRF route leak doesn't work for local IPs

bummer. but at least it is somewhat to build a kind-of-workaround thanks for the example to which i can further test this for a prod approach EDIT: are there any hopes or plans for an implementation to be able to achieve this dynamically (well via BGP) like most systems support it? would be great be...
by spippan
Fri Dec 29, 2023 3:49 pm
Forum: Announcements
Topic: v7.14beta [testing] is released!
Replies: 510
Views: 153671

Re: v7.14beta [testing] is released!

What's new in 7.14beta4 (2023-Dec-29 10:05): *) system - expose "lo" and "vrf" interfaces; good. now please make VRF import/export (local inter-VRF route leaking) finally work ( https://forum.mikrotik.com/viewtopic.php?p=1045062#p1045062 ) BTW : is BGP even under active patching...
by spippan
Fri Dec 29, 2023 3:19 pm
Forum: RouterOS beta
Topic: v7 inter VRF route leak doesn't work for local IPs
Replies: 38
Views: 12687

Re: v7 inter VRF route leak doesn't work for local IPs

@nichky FYI - THAT is the whole silverline which should be accomplished as a BARE MINIMUM for a serious implementation of VRFs in rOS! (quote from user "emunt6") The network industry standard is to create a route-table (RD), you can add static/dynamic routes, and assign interface/ interfa...
by spippan
Fri Dec 29, 2023 2:05 pm
Forum: RouterOS beta
Topic: v7 inter VRF route leak doesn't work for local IPs
Replies: 38
Views: 12687

Re: v7 inter VRF route leak doesn't work for local IPs

EDIT: opened ticket SUP-138970 6 months in testing, asking and trying are definetly a strechted time for patience now vpnv4 - works well, show us your config. please consider post #9 i have 2 VRFs with RD set i want to route-leak each VRF to the other (on that same router) what is missing to achiev...
by spippan
Fri Dec 29, 2023 11:43 am
Forum: RouterOS beta
Topic: v7 inter VRF route leak doesn't work for local IPs
Replies: 38
Views: 12687

Re: v7 inter VRF route leak doesn't work for local IPs

@shippan - are you trying to achieve vpn4? - That works well as well. What is not working on v7 - U cant get default gateway via VRF. I have raised a ticket and Maris Is already confirmed that. If you mean to originate the default route from vrf into vpnv4 then currently this feature does not exist...
by spippan
Fri Dec 29, 2023 3:50 am
Forum: RouterOS beta
Topic: v7 inter VRF route leak doesn't work for local IPs
Replies: 38
Views: 12687

Re: v7 inter VRF route leak doesn't work for local IPs

Maris, how can we achieve route leaking in RouterOS v7 ?
maris?
by spippan
Thu Dec 28, 2023 7:02 pm
Forum: Forwarding Protocols
Topic: Status of ROS V7 for BGP, MPLS, VPLS
Replies: 70
Views: 12346

Re: Status of ROS V7 for BGP, MPLS, VPLS

inter-VRF route leaking via RD with import/export on ROSv7 like it was useable in v6 That never existed in v6 either. There was just a workaround where you could establish bgp session between vrfs on a single router and then redistribute. In theory you already can do the same in v7 too. this partic...
by spippan
Thu Dec 28, 2023 7:00 pm
Forum: RouterOS beta
Topic: v7 inter VRF route leak doesn't work for local IPs
Replies: 38
Views: 12687

Re: v7 inter VRF route leak doesn't work for local IPs

version is 7.14beta3 now and what am i missing here?
mikrotikVRFv7import-export-via-RD.png
how to import ip routing infos from one VRF into another VRF?
something which was possible in v6 (https://wiki.mikrotik.com/index.php?tit ... te_Leaking)
by spippan
Thu Dec 28, 2023 4:53 pm
Forum: General
Topic: Behind on my upgrades... path forward? [SOLVED]
Replies: 12
Views: 1490

Re: Behind on my upgrades... path forward? [SOLVED]

isn't v6 around the 2.4.x kernel? or am i wrong here?

EDIT:
no, it was linux kernel 3.3.5
by spippan
Mon Dec 25, 2023 2:37 am
Forum: Forwarding Protocols
Topic: Status of ROS V7 for BGP, MPLS, VPLS
Replies: 70
Views: 12346

Re: Status of ROS V7 for BGP, MPLS, VPLS

That never existed in v6 either. There was just a workaround where you could establish bgp session between vrfs on a single router and then redistribute. In theory you already can do the same in v7 too. that is the point in vrf route leaking. same on cisco in the internal, underlying structure and ...
by spippan
Sun Dec 24, 2023 5:48 pm
Forum: RouterOS beta
Topic: Feature Request NAT-PMP
Replies: 18
Views: 12010

Re: Feature Request NAT-PMP

It is time for USB-EXTRAS package..

USB ethernet adapter and USB wireless adapter drivers seperate package for example realtek branded USB adapters..
wrong thread
by spippan
Wed Dec 20, 2023 6:16 pm
Forum: Forwarding Protocols
Topic: Status of ROS V7 for BGP, MPLS, VPLS
Replies: 70
Views: 12346

Re: Status of ROS V7 for BGP, MPLS, VPLS

inter-VRF route leaking via RD with import/export on ROSv7 like it was useable in v6 That never existed in v6 either. There was just a workaround where you could establish bgp session between vrfs on a single router and then redistribute. In theory you already can do the same in v7 too. that is the...
by spippan
Wed Dec 20, 2023 4:30 pm
Forum: Announcements
Topic: v7.14beta [testing] is released!
Replies: 510
Views: 153671

Re: v7.14beta [testing] is released!

*) system - expose "lo" interface;
no more fake loopback bridges required for ospf :)
did you test it yet? currious if it really works
by spippan
Wed Dec 20, 2023 12:11 am
Forum: Forwarding Protocols
Topic: Status of ROS V7 for BGP, MPLS, VPLS
Replies: 70
Views: 12346

Re: Status of ROS V7 for BGP, MPLS, VPLS

...or inter-VRF route leaking via RD with import/export on ROSv7 like it was useable in v6 or since xx-years on cisco ios (yeah that one, which also powered 2800 and 1800 routers...) I don't just understand why ROSv7 is lacking a lot of the generic features dating back to the early 2000s that we ca...
by spippan
Tue Dec 19, 2023 8:56 pm
Forum: Forwarding Protocols
Topic: Status of ROS V7 for BGP, MPLS, VPLS
Replies: 70
Views: 12346

Re: Status of ROS V7 for BGP, MPLS, VPLS

...or inter-VRF route leaking via RD with import/export on ROSv7 like it was useable in v6 or since xx-years on cisco ios (yeah that one, which also powered 2800 and 1800 routers...)
by spippan
Mon Dec 18, 2023 10:43 pm
Forum: Forwarding Protocols
Topic: IS-IS
Replies: 134
Views: 53071

Re: IS-IS

remember, there's new ampere chips coming soon. that might come with some routing surprises as well. I doubt those are being brought it just for control plan on marvell switch chips.
It would be stupid if they have a 128 core ampere doing 90s routing vs running vpp / dpdk.
exactly.
by spippan
Fri Dec 15, 2023 1:33 am
Forum: Wireless Networking
Topic: Any news in 60GHz?
Replies: 7
Views: 1938

Re: Any news in 60GHz?

+ 1

And after 3 years
where did normis post that?
by spippan
Wed Dec 13, 2023 10:28 pm
Forum: The Dude
Topic: Is Dude the answer i'm looking for
Replies: 6
Views: 2396

Re: Is Dude the answer i'm looking for

do you know of any good alternative or option to do those things like in the form of a centralized controler for routeros?
I haven't used it, and it's paid offering, but Unimus (https://unimus.net) does with config stuff AFAIK.
thanks a lot - i will give this one a try. looks promising
by spippan
Tue Dec 12, 2023 1:23 am
Forum: General
Topic: MLAG Issue - MLAG functionality flaps LACP system-id of secondary when primary reboots
Replies: 15
Views: 6300

Re: MLAG Issue - MLAG functionality flaps LACP system-id of secondary when primary reboots

Thanks for sharing these details! ... any news on that? unfortunately advanced switching isn't in mikrotik's strong pocket i reckon access layer - yeah, might work aggregation layer - meh might maybe core layer - nah, no way at all with L2 bugs reported/read in the forum and the stagnated (like BGP...
by spippan
Mon Dec 11, 2023 9:41 pm
Forum: The Dude
Topic: Is Dude the answer i'm looking for
Replies: 6
Views: 2396

Re: Is Dude the answer i'm looking for

Tricky question. Dude is old and frozen in functionality...but still works fine. Just not modern. Dude is much better at monitoring and recording data, than "managing" devices. e.g. you can view any router settings or create terminal session to them. But if rolling out config is your main...
by spippan
Tue Dec 05, 2023 11:43 am
Forum: General
Topic: Feature requests
Replies: 1741
Views: 636262

Re: Feature requests

SSTP AES hardware acceleration please! SSTP is the only standard protocol for Windows road warriors (but also can be used on other platforms with additional software) which works nearly anywhere. All other options like l2tp, ikev2, wireguard etc. are sometimes blocked in public or hotel networks. N...
by spippan
Wed Nov 29, 2023 5:25 pm
Forum: General
Topic: How to Hairpin on the first hop (not on internet gateway)
Replies: 6
Views: 1888

Re: How to Hairpin on the first hop (not on internet gateway)

....on your router's make and model.
NO! - but on your network's setup! a mikrotik router NAT configuration from plain functionality (not speaking of performance) is model agnostic
by spippan
Wed Nov 29, 2023 5:21 pm
Forum: Announcements
Topic: v7.13beta [testing] is released!
Replies: 467
Views: 91851

Re: v7.13beta [testing] is released!

redistribute default route via VRF-BGP is completely broken on v7. I have opened ticket with MikroTik support. i've been told to provide more details (how it works on v6). Once i've done that, almost five days i'm waiting for response VRF route leaking via (i)BGP on ROS v7.xx.x is a complete CF and...
by spippan
Wed Nov 29, 2023 5:18 pm
Forum: Announcements
Topic: v7.13beta [testing] is released!
Replies: 467
Views: 91851

Re: v7.13beta [testing] is released!

And they probably won't. cAP ac and hAP ac2 are in the same boat, too little memory (RAM) for the full featured drivers. They could ship some -smallbuffers version of drivers for these devices, but doubt that this will see any light. The cAP AC have 256MB and I think they are enough. there was a 25...
by spippan
Fri Nov 17, 2023 5:33 pm
Forum: Announcements
Topic: v7.12.1 [stable] is released!
Replies: 252
Views: 94102

Re: v7.12 [stable] is released!

cisco gives a definitive result which mirrors the routers routing decision rather then MTs version of "hey i got these routes which MIGHT could be used to route your asked DST" a "show" cmd. to reflect the routers routing decision to the current FDB would be great. Unfortunately...
by spippan
Fri Nov 17, 2023 5:26 pm
Forum: Announcements
Topic: v7.13beta [testing] is released!
Replies: 467
Views: 91851

Re: v7.13beta [testing] is released!

never use beta versions in routers that are used in real and important networks. use beta where you can reinstall with netinstall
somehow sad and pathetic this has to be told to people (or even those who refer to themselfes as network engineers)
by spippan
Thu Nov 16, 2023 2:45 am
Forum: Announcements
Topic: v7.12.1 [stable] is released!
Replies: 252
Views: 94102

Re: v7.12 [stable] is released!

cisco "show ip route x.x.x.x" is not equivalent to "ip route check". You can already do the same as ciscos show ip route with ip route print where x.x.x.x in dst-address neither is ip route print where x.x.x.x in dst-address an equivalent to cisco "show ip route x.x.x.x&quo...
by spippan
Thu Nov 16, 2023 1:10 am
Forum: General
Topic: New Ubiquiti Multi-gig RJ45 NBASE-T Transceiver not working
Replies: 48
Views: 9293

Re: New Ubiquiti Multi-gig RJ45 NBASE-T Transceiver not working

For what is worth: after waiting and waiting, I gave up and searched for a different, low-power RJ45 transceiver. I bought one from fs.com (SFP-10G-T100, part number #154925, chipset Broadcom, and marked as Power: ≤1.8W) and that just worked when plugged into a CRS309. On the other end is a S+RJ10 ...
by spippan
Thu Nov 16, 2023 12:51 am
Forum: Announcements
Topic: v7.12.1 [stable] is released!
Replies: 252
Views: 94102

Re: v7.12 [stable] is released!

(already said a couple of time in the last months .. and sent support requests) Old v6 command " ip route check x.y.z.k" still missing! e.g. /ip route check 8.8.8.8 (linux equivalent "ip route get 8.8.8.8") It's very usefull when you have many routes in your routing table and yo...
by spippan
Tue Nov 14, 2023 12:57 pm
Forum: Announcements
Topic: v7.13beta [testing] is released!
Replies: 467
Views: 91851

Re: v7.13beta [testing] is released!

Wifi menu is included in the bundle as described in changelog. All routers will have "WifiI" menu. You can not run router without system (a.k.a. bundle) package. "our" suggestion was that you move the WiFi menu and associated software into a separate package as well, so that it ...
by spippan
Tue Nov 14, 2023 12:55 pm
Forum: Announcements
Topic: v7.13beta [testing] is released!
Replies: 467
Views: 91851

Re: v7.13beta [testing] is released!

Hello. Please, help with questions. Which package should I install on each device if only 5 GHz is needed? 2.4GHz I don't need. 1) Capsman : CCR2004-16G-2S+ (ARM 64bit) + cAP ac (ARM); 2) Without capsman standalone hAP ac lite (MIPSBE RB952Ui-5ac2nD).Or will Wi-Fi never work on hAP ac lite (MIPSBE ...
by spippan
Tue Nov 14, 2023 12:27 pm
Forum: Forwarding Protocols
Topic: IS-IS
Replies: 134
Views: 53071

Re: IS-IS

yep, it's in 7.13b1. I've got it up in the lab. pretty straight forward, although I'm having some issue with it forgetting disabled or removed routes. but it does bring routes up so that's step 1! Also, no BFD toggle, BFD is essential for ISIS. quick guess ... they are working on it right now.
by spippan
Mon Nov 13, 2023 5:29 pm
Forum: Announcements
Topic: v7.13beta [testing] is released!
Replies: 467
Views: 91851

Re: v7.13beta [testing] is released!

impressive and useful console additions. thanks
also the little added option to ping right away from the DHCP leases menu is a welcome addition.
by spippan
Mon Nov 13, 2023 5:24 pm
Forum: Announcements
Topic: v7.12.1 [stable] is released!
Replies: 252
Views: 94102

Re: v7.12 [stable] is released!

Noticed that on all of them I needed to reboot a second time to upgrade the routerboard firmware despite having "/system routerboard settings set auto-upgrade=yes" configured. That's expected and has been so ever since auto-upgrade is available. The reason is that .fwf files with new rout...
by spippan
Sun Nov 12, 2023 10:59 pm
Forum: Scripting
Topic: Backup script to USB
Replies: 5
Views: 3974

Re: Backup script to USB

very impressive
by spippan
Sat Nov 11, 2023 2:46 pm
Forum: Forwarding Protocols
Topic: IS-IS
Replies: 134
Views: 53071

Re: IS-IS

Why would it require IPv4 or IPv6 addressing to function?
feeling confused 😕 Unable to comprehend how to respond
[/quote]

guess it was meant as IS-IS does not need an ipv4/6 connection just to function (because of CLNP)
by spippan
Fri Nov 10, 2023 7:11 pm
Forum: General
Topic: Feature requests
Replies: 1741
Views: 636262

Re: Feature requests

Winbox Feature Request In Container when using copy put the "tag" value into the "remote-image" field. so you can effectively duplicate the entry when required. allow to use a log prefix to easily identify which container is actually reporting the thing to the long +10 In Files ...
by spippan
Thu Nov 09, 2023 4:40 pm
Forum: Scripting
Topic: Backup script to USB
Replies: 5
Views: 3974

Re: Backup script to USB

Work on ROS6. ROS7 DateTime does not work. hi oh thanks for the reminder - i corrected it yet but forgot to upload here: :log info "primulus_CONFBKB::dailyConfigBackupD START"; #fetch timestamp stuff :local dSysDateTime [/system clock get date] :local dDay [ :pick $dSysDateTime 8 10 ] :lo...
by spippan
Fri Nov 03, 2023 11:27 pm
Forum: General
Topic: Anyone use LibreNMS?
Replies: 6
Views: 2543

Re: Anyone use LibreNMS?

routeros works quite well with libreNMS (even with auto-discovery)

also take a look at OXiDiZED for automated config archive and versioning of those

EDIT: alternative would be Observium
by spippan
Fri Nov 03, 2023 11:25 pm
Forum: General
Topic: Feature requests
Replies: 1741
Views: 636262

Re: Feature requests



how would you like to move phase1 settings to phase2 around or vice-versa?
No need for that. I would (like the other request) just want to specify an initial phase1 profile.
oh sorry, misunderstood
got it. indeed would be favourable
by spippan
Fri Nov 03, 2023 2:59 pm
Forum: General
Topic: Feature requests
Replies: 1741
Views: 636262

Re: Feature requests

+1! It would be great to be able to select a profile other than default (but I see exchange mode is not part of the profile) It would be great when these settings would be moved into the profile, e.g. also "passive". how would you like to move phase1 settings to phase2 around or vice-versa?
by spippan
Mon Oct 16, 2023 10:43 pm
Forum: General
Topic: Zero touch provision
Replies: 7
Views: 1451

Re: Zero touch provision

I mean real "ZERO TOUCH". so not touching the device at all. Not even reconfigure the boot device. Is this possible to unbox a device, plug in and the device finds its config server automatically, i.e. the TR069 server. have not seen a solution without ever touching a router to achieve th...
by spippan
Wed Oct 11, 2023 1:57 am
Forum: General
Topic: Conditional NAT Routing Based on Domain Name for Two Web Applications on Port 80
Replies: 9
Views: 1084

Re: Conditional NAT Routing Based on Domain Name for Two Web Applications on Port 80

NGINX proxy blah blah blah sounds like a bad kung fu movie. Its knowitallconfigsnobbery plain and simple. I assure you, there are a lot of real-life nginx ninjas out there, managing what must be millions of instances. This is not esoteric knowledge. You simply don't know how to do it yet. and exact...
by spippan
Wed Oct 11, 2023 1:35 am
Forum: General
Topic: NAT only allowing one NAT
Replies: 4
Views: 720

Re: NAT only allowing one NAT

New install 7.8??? 7.11.2 would be a new install.......
maybe the HARDWARE itself is meant as the "new install" and not the FIRMWARE -.-
by spippan
Wed Oct 11, 2023 1:34 am
Forum: RouterOS beta
Topic: BGP - Prefix Count
Replies: 9
Views: 3424

Re: BGP - Prefix Count

overall on v7 BGP development/improvement is a bit stalled at MT
by spippan
Wed Oct 11, 2023 1:31 am
Forum: General
Topic: NAT only allowing one NAT
Replies: 4
Views: 720

Re: NAT only allowing one NAT

masquerade uses the first IP on the OUT interface if there are more than one ip on that OUT interface, masquerade uses the (i guess) lowest IP of that interface you need to explicitly src-nat with your desired IP for DST-NAT: if there are more than one IP on the IN interface you dst-nat on, you also...
by spippan
Tue Oct 10, 2023 11:19 pm
Forum: General
Topic: Conditional NAT Routing Based on Domain Name for Two Web Applications on Port 80
Replies: 9
Views: 1084

Re: Conditional NAT Routing Based on Domain Name for Two Web Applications on Port 80

little astray ... but you could even setup the nginx/apache rproxy in a container on your mikrotik ;=)
by spippan
Tue Oct 10, 2023 11:00 pm
Forum: General
Topic: Zero touch provision
Replies: 7
Views: 1451

Re: Zero touch provision

AFAIK one needs to at least set the devices to change the default boot device (which was "nand-if-fail-then-ethernet") to something other desired (e.g. "try-ethernet-once-then-nand") otherwise the router will start with the factory default config when powered on the first time ma...
by spippan
Mon Oct 02, 2023 5:38 pm
Forum: Wireless Networking
Topic: +2 years lasting bug
Replies: 2
Views: 1319

Re: +2 years lasting bug

Connection dies and is not accessible to the outside, after rebooting it works for some time. Mikrotik support can't help since +2 years, it's tcp connection. What to do? first, describe the setup, your desired connection, your firmware version, what you'd like to do and what you expect after all??
by spippan
Mon Oct 02, 2023 5:29 pm
Forum: Announcements
Topic: v7.12beta [testing] is released!
Replies: 263
Views: 125219

Re: v7.12beta [testing] is released!

i tied that before but couldnt fiure out what was wrong. directory listing shows "forbidden". not helpful neither For stable release, you can see the "directory listing" https://mikrotik.com/download/archive If you want to download it directly using a version name from RouterOS,...
by spippan
Mon Oct 02, 2023 5:23 pm
Forum: Containers
Topic: UniFi Controller container on RB5009 will not start after reboot
Replies: 6
Views: 4255

Re: UniFi Controller container on RB5009 will not start after reboot

Yeah container's disk seem "fragile". There are a lot of corner cases just not covered that come up in the real world. Mainly if ROSE or USB is not mounted when the container try to start, it doesn't try again. If disk name changes due plugging in new things, also a problem. And changing ...
by spippan
Mon Oct 02, 2023 5:21 pm
Forum: RouterOS beta
Topic: mDNS repeater feature
Replies: 330
Views: 101034

Re: mDNS repeater feature

sorry, off-topic but ... an additional empty bridge "Lo0" for example would not violate that, right? (for loopback addressing) Loopback is fine, I have single bridge for physical ports/LACP/The works, and separate bridge with STP disabled for loopback. But in some cases, such as MPLS/VPLS...
by spippan
Tue Sep 19, 2023 4:32 pm
Forum: Announcements
Topic: WinBox v3.39 released!
Replies: 96
Views: 59395

Re: WinBox v3.39 released!

maybe also useful to add a "bind to interface" for winbox operation or discovery

maybe something like this
wbox-bindIF-19-09-2023.png
by spippan
Mon Sep 18, 2023 9:32 pm
Forum: Announcements
Topic: v7.11.2 [stable] is released!
Replies: 348
Views: 164357

Re: v7.11.2 [stable] is released!

I am tired of the crappy information provided. Is anybody here able to articulate some helpful cue? you know mikrotik has a wiki, help pages and a youtube channel where exactly NETINSTALL is mentioned. and also - routeros is not a "shiny clicky pointy" system - you need to have at least s...
by spippan
Mon Sep 18, 2023 9:16 pm
Forum: RouterOS beta
Topic: mDNS repeater feature
Replies: 330
Views: 101034

Re: mDNS repeater feature

You're violating the Linux DSA network stack by having multiple bridges. Multiple bridges is a concept that has been depreciated with the introduction of VLAN aware bridging, migrate to proper single bridge configuration. Your topology is improper if you can't do it with single bridges and VLAN awa...
by spippan
Mon Sep 18, 2023 10:02 am
Forum: General
Topic: Mikrotik SUCKS
Replies: 82
Views: 12770

Re: Mikrotik SUCKS

Most network engineers understand the technology/theory and can navigate easily between different vendors' implementations to achieve the same results. If it takes you days to set up a VLAN, then most likely you are not well-versed with the technology you are trying to use. Just because on other ve...
by spippan
Sun Sep 17, 2023 5:04 pm
Forum: General
Topic: Mikrotik SUCKS
Replies: 82
Views: 12770

Re: Mikrotik SUCKS

wow for ~20 years of "experience" OP should learn SDN stuff and not individuall and cost-effective setups there is no, i repeat NO, vendor out where all is calm-and-charm to just setup - even meraki has some fairly downsides. same goes for cisco, juniper, palo alto, barracuda, checkpoint (...
by spippan
Sun Sep 17, 2023 4:34 pm
Forum: Beginner Basics
Topic: Dhcp Mikrotik \ Dns server windows
Replies: 2
Views: 855

Re: Dhcp Mikrotik \ Dns server windows

yes this is a windows thing client reports its PTR back to the windows dhcp/dns server it can be manually invoked via CMD ipconfig /? Options: /? Display this help message /all Display full configuration information. /release Release the IPv4 address for the specified adapter. /release6 Release the ...
by spippan
Tue Sep 12, 2023 12:59 pm
Forum: SwOS
Topic: CSS 610 swOS Lite VLAN Translation
Replies: 3
Views: 2845

Re: CSS 610 swOS Lite VLAN Translation

CSS swOS (lite) does not feature this function

https://help.mikrotik.com/docs/display/ ... ies+Manual
by spippan
Mon Sep 11, 2023 9:22 pm
Forum: Announcements
Topic: v7.11.2 [stable] is released!
Replies: 348
Views: 164357

Re: v7.11, 7.11.1 and more [stable] are released!

... and then there are (probably) thousands of us using RouterOS on dozens of devices from home applications to medium size enterprises and did not encounter any serious issue for years, so we are perfectly fine with calling it "stable" :) RouterOS has so many features, most of the interc...
by spippan
Mon Sep 11, 2023 4:34 pm
Forum: Announcements
Topic: v7.11.2 [stable] is released!
Replies: 348
Views: 164357

Re: v7.11, 7.11.1 and more [stable] are released!

The solution is simple: "stable" channel should be renamed to Beta (as it is actually beta, regardless of what mikrotik marketing team says). ... and then there are (probably) thousands of us using RouterOS on dozens of devices from home applications to medium size enterprises and did not...
by spippan
Mon Sep 11, 2023 4:29 pm
Forum: Scripting
Topic: How do I list items in the CLI entry?
Replies: 6
Views: 2350

Re: How do I list items in the CLI entry?

Sometimes you need to pick several items from a list or enter several items and to apply them to an entry, or both. i.e; 1:many, many:1, many:many; e.g; We'd like to set the winbox service available on VRF red, green, and blue; /ip/service/set winbox vrf= ? I tried: /ip/service/set winbox vrf=R,G,B...
by spippan
Wed Sep 06, 2023 2:43 am
Forum: RouterOS beta
Topic: VRF status with RouterOS v7
Replies: 16
Views: 7922

Re: VRF status with RouterOS v7

According to https://help.mikrotik.com/docs/display/ ... l+Overview, this feature is not available yet:
Some kind of mechanism to import/export routes from one vrf to another within same router
got lucky my 3 CCR1072 at work are still v6 "able"
by spippan
Tue Sep 05, 2023 11:10 pm
Forum: Announcements
Topic: MikroTik Devices Controller
Replies: 332
Views: 237536

Re: MikroTik Devices Controller

Feature: ability to interact with Ansible, and script running capabilities e.g Python/Netmiko for network automation.
ansible can be integrated by today - (rest) api and ssh with pubkey-auth
by spippan
Tue Sep 05, 2023 11:09 pm
Forum: Announcements
Topic: v7.11.2 [stable] is released!
Replies: 348
Views: 164357

Re: v7.11 [stable] is released!

Besides, under Linux, NetInstall 7.x is broken completely and I can only NetInstall using 6.x (I did that several times). maybe you should try to set every other interface "down" on your linux host ("(sudo)ip link set [IFNAME] down") except the one which netinstall should run on...
by spippan
Tue Sep 05, 2023 2:35 am
Forum: RouterOS beta
Topic: VRF status with RouterOS v7
Replies: 16
Views: 7922

Re: VRF status with RouterOS v7

If you mean VPNv4, it is currently implemented. VPNv6 is still in the To Do list. cannot import/export routes from VRF to another VRF locally say: RD 111:123 import 111:123 export 111:123 import 222:456 RD 222:456 import 222:456 export 222:456 import 111:123 on 7.8 it kind of worked ... upward the ...
by spippan
Mon Sep 04, 2023 9:33 pm
Forum: General
Topic: {ASK} BGP-def route
Replies: 10
Views: 1887

Re: {ASK} BGP-def route

here the rOS v7.8 in contrast with the same configuration [admin@RRZ] > ip vrf export terse # sep/04/2023 18:28:37 by RouterOS 7.8 # software id = # /ip vrf add interfaces="e1.151(rz),Lo0" name=rz /ip vrf add interfaces="e1.1113(39390)" name=39390 /ip vrf add interfaces="e1....
by spippan
Mon Sep 04, 2023 9:25 pm
Forum: General
Topic: {ASK} BGP-def route
Replies: 10
Views: 1887

Re: {ASK} BGP-def route

was there any issues, i haven't noticed anything like that since ros 7.9+ till 7.12b3 BGP VPN (VRF import/export) does not work if anything of that helps... the routes are not getting propagated among the VRFs/routing tables [admin@RRZ] > ip vrf export terse # 2023-09-04 18:18:58 by RouterOS 7.12be...
by spippan
Mon Sep 04, 2023 9:15 pm
Forum: RouterOS beta
Topic: VRF status with RouterOS v7
Replies: 16
Views: 7922

Re: VRF status with RouterOS v7

Yes of course, it will be implemented.
do we have any upgrade on this? :|
by spippan
Mon Sep 04, 2023 8:43 pm
Forum: Forwarding Protocols
Topic: ROSv6 to v7 VPNv4 VRF Routes
Replies: 14
Views: 4402

Re: ROSv6 to v7 VPNv4 VRF Routes

apparently this still is the "at the moment way to go" in routeros v7

https://help.mikrotik.com/docs/pages/vi ... eId=328206
at least after version 7.8 where the import/export at least happens
by spippan
Mon Sep 04, 2023 4:10 pm
Forum: RouterOS beta
Topic: v7 inter VRF route leak doesn't work for local IPs
Replies: 38
Views: 12687

Re: v7 inter VRF route leak doesn't work for local IPs

Thank you, why would routes exchanged by BGP work and static ones not ? This is the minimum config for example: (this is not Mikrotik) .... That's all, this is way more simple than the RouterOS 6.x way. I do not know the "RouterOS 7.x" VRF implementation. still not working as far as i tes...
by spippan
Mon Sep 04, 2023 3:36 pm
Forum: General
Topic: {ASK} BGP-def route
Replies: 10
Views: 1887

Re: {ASK} BGP-def route

is VRF import/export from one VRF to anothet VRF on the same router finally working on rOS v7??
by spippan
Sun Sep 03, 2023 11:22 pm
Forum: General
Topic: Use Mikrotik with SFP port to replace ISP (Tet) modem
Replies: 3
Views: 1377

Re: Use Mikrotik with SFP port to replace ISP (Tet) modem

Thank you for encouraging response! There are several models used by ISP (Tet). Modem list can be found in this article: https://tet.lv/palidziba/lv/palidziba_majai/internets/majas-internets/problemas_un_risinajumi/32902 from which latest model used by ISP is Alcatel Lucent I-240W-A from what I can...
by spippan
Sun Sep 03, 2023 11:06 pm
Forum: General
Topic: Wireguard Multi-Site OSFP not working
Replies: 3
Views: 1788

Re: Wireguard Multi-Site OSFP not working

and do not forget to add 224.0.0.5 and 224.0.0.6 to your "allowed adresses"
by spippan
Sun Sep 03, 2023 10:51 pm
Forum: Announcements
Topic: v7.11.2 [stable] is released!
Replies: 348
Views: 164357

Re: v7.11, 7.11.1 and more [stable] are released!

I mean, that pesky routing process, it must be THE job, don't you think? Pretty ironic, all other bells&whistles worked. It takes years to gain reputation, and only days to lose it. ROSv7 can not be considered stable and suitable for production or remote areas. It is strictly SOHO now. A shame....
by spippan
Sun Sep 03, 2023 4:26 pm
Forum: Announcements
Topic: v7.11.2 [stable] is released!
Replies: 348
Views: 164357

Re: v7.11, 7.11.1 and more [stable] are released!


You had one job...
and that is one of the wrongest assumptions ever made considering software development and upgrade-paths
by spippan
Sun Sep 03, 2023 4:23 pm
Forum: Forwarding Protocols
Topic: tracerout shows both the WANs GateWays in my routerOS(load balancer)
Replies: 7
Views: 2929

Re: tracerout shows both the WANs GateWays in my routerOS(load balancer)

... Also, loosely related to the topic: taking ports into account in the PCC calculation may bite your back if your LAN clients access paranoid web sites (typically banking ones) - such sites often like to redirect the client's "application session" between multiple servers, but drop the ...
by spippan
Fri Sep 01, 2023 10:23 am
Forum: Announcements
Topic: v7.11.2 [stable] is released!
Replies: 348
Views: 164357

Re: v7.11 and 7.11.1 [stable] are released!

After upgrade from 7.11 to 7.11.1 many my devices can not get IP from DHCP. Tell me, please, what could be the reason? Downgrade to 7.11 was fix this problem. more details would be good. is the dhcp client a 7.11.1 client or is the dhcp server on 7.11.1? or both? what was the status on the DHCP ser...
by spippan
Fri Sep 01, 2023 2:25 am
Forum: Scripting
Topic: Run a script on Wireguard login
Replies: 2
Views: 2076

Re: Run a script on Wireguard login

Hello I try to run a script when a user login via Wireguard. Is that possible? This is what I have: /interface wireguard set wireguard1 on-up=WireGuardConnectScript and /system script add name=WireGuardConnectScript source={ :log info "Wireguard Login from $peername" } Thanks for helping ...
by spippan
Fri Sep 01, 2023 2:16 am
Forum: Announcements
Topic: v7.11.2 [stable] is released!
Replies: 348
Views: 164357

Re: v7.11 [stable] is released!

WG/ChaCha lack support för HW acceleration
which hardware has this in hw-offload?
until now i know of none
by spippan
Fri Sep 01, 2023 2:08 am
Forum: Containers
Topic: UniFi Controller container on RB5009 will not start after reboot
Replies: 6
Views: 4255

Re: UniFi Controller container on RB5009 will not start after reboot

same thing for all my containers on my RB1100AHx4
after a reboot i always have to copy the container, re-insert the tag (..:latest, or whatever), remove the old one, let the new one extract and after that i am able to start up them again.

annoying
by spippan
Fri Sep 01, 2023 1:55 am
Forum: Announcements
Topic: NEW FEATURE: Back to Home VPN
Replies: 296
Views: 235183

Re: NEW FEATURE: Back to Home VPN

yes, but it does not matter for BTH. That is for Cloud DNS feature, unrelated to this topic. BTH does not care if you have public or private IP.
thanks for the clarification
by spippan
Fri Sep 01, 2023 1:54 am
Forum: General
Topic: ⚠️Security Issue: Changing rights / disable / delete the users has no effect on already logged in users.
Replies: 35
Views: 5679

Re: ⚠️Security Issue: Changing rights / disable / delete the users has no effect on already logged in users.

I've seen this on MikroTik, but what about other vendors?

Plain Debian, or whatever or any big vendor. Do they proactively kill user session upon deletion immediately?
don't know if upon deletion but you have the option to kill a session proactively
something which is not possible at all on rOS
by spippan
Sun Aug 27, 2023 11:06 pm
Forum: General
Topic: MLAG hopelessly broken?
Replies: 20
Views: 4925

Re: MLAG hopelessly broken?

if you need reliable MLAG hardware go for cisco, extreme or if you need to be on budget ... fs.com

speaking of fs...
MLAG featuring switches:
N5860-48SC (mlag or stack)
S5860-48SC (stack)
S5850-48S6Q (mlag)

routing ... mikrotik
switching ... cisco, fs, aruba, extreme
by spippan
Fri Aug 25, 2023 6:11 pm
Forum: Announcements
Topic: NEW FEATURE: Back to Home VPN
Replies: 296
Views: 235183

Re: NEW FEATURE: Back to Home VPN

use-local-address is not for Back to Home. It is for Cloud DNS.
So what will happen if I enable use-local-address ? The Cloud DNS will be set to my local public ipv4 address?
it appears to be that way:
https://help.mikrotik.com/docs/display/ ... d-Advanced
by spippan
Fri Aug 25, 2023 6:07 pm
Forum: General
Topic: Destination Host Unreachable on local network unless packet sniffer is running
Replies: 10
Views: 1908

Re: Destination Host Unreachable on local network unless packet sniffer is running

do you see ARP records when the sniffer is not running?
maybe there is a problem with ARP learning or ageing on the bridge and/or vlan interfaces
by spippan
Fri Aug 25, 2023 4:39 pm
Forum: Announcements
Topic: v7.12beta [testing] is released!
Replies: 263
Views: 125219

Re: v7.12beta [testing] is released!

*) wireguard - added "wg-add-client" configuration wizard (CLI only);
*) wireguard - added "wg-export" and "wg-import" functionality (CLI only);

Thank you very much.
yes. that is a welcome addition - hopefully this will come to winbox (and maybe webgui) too
by spippan
Fri Aug 25, 2023 4:34 pm
Forum: Announcements
Topic: MikroTik Devices Controller
Replies: 332
Views: 237536

Re: MikroTik Devices Controller

if they would let out a piece of demo/test software or make statements about it, the forum would again explode with complaints and roars of critic (with which most of the time no one can improve anything; often plain nagging) this might unnecessarily open another front for mikrotik staff to look int...
by spippan
Fri Aug 25, 2023 3:25 am
Forum: Announcements
Topic: v7.12beta [testing] is released!
Replies: 263
Views: 125219

Re: v7.12beta [testing] is released!

No IS-IS, no 6VPE. The wait continues...
A protocol from 1992. Why not change to OSPF
maybe because is-is performes a bit better
[ https://ipwithease.com/ospf-vs-isis/ ]
2023-08-25 02_26_23-OSPF vs ISIS _ Detailed Comparison - IP With Ease — Mozilla Firefox.png
by spippan
Mon Aug 21, 2023 1:57 pm
Forum: General
Topic: Downgrade To LongTerm
Replies: 24
Views: 3318

Re: Downgrade To LongTerm

Stable 7.8 IKEv2 users vpn work 1 day, after traffic on ipsec rules. reboot router and work again... fucking stable... You are apparently one of those that is confused about the label "stable" in a RouterOS release name. Lots of people think that the "stable" versions are the on...
by spippan
Mon Aug 21, 2023 1:39 pm
Forum: Announcements
Topic: MikroTik Devices Controller
Replies: 332
Views: 237536

Re: MikroTik Devices Controller

Hi, Im just wondering why is this topic still open...it has been 2 years since first information about MDC and nothing till now. Not even alpha, beta etc. Everyone is writing their wisches here but realisticly there may not been any device controller from Mikrotik. If you chech competition... MT is...
by spippan
Mon Aug 21, 2023 11:36 am
Forum: Announcements
Topic: WinBox v3.39 released!
Replies: 96
Views: 59395

Re: WinBox v3.39 released!

Another feature request: when enabling a "filter" in winbox, after adding one or more filter rules, then disabling the filter, please remember the filter rules so that when filter is enabled again the last-used rules re-appear, and not a blank new filter. Also when changing the filter top...
by spippan
Thu Aug 17, 2023 1:00 pm
Forum: General
Topic: RB3011 - still a good choice?
Replies: 22
Views: 2655

Re: RB3011 - still a good choice?

Re: RB3011 - still a good choice?
: No.
depends.
what are the requirements of the desired setup...
by spippan
Thu Aug 17, 2023 12:53 am
Forum: General
Topic: RB3011 - still a good choice?
Replies: 22
Views: 2655

Re: RB3011 - still a good choice?

I believe that the LCD screen is not supported on RouterOS 7. So, forget that the screen.
LCD supported on v7 (at least up to 7.10.2)
by spippan
Thu Aug 17, 2023 12:51 am
Forum: Forwarding Protocols
Topic: ROSv6 + ROSv7 BGP MIX
Replies: 5
Views: 2173

Re: ROSv6 + ROSv7 BGP MIX

in general as of the time of writing ... if you do NOT need any feature from v7 but rely on BGP ... stay with v6 ! a pity you could not upgrade to the new CCR devices and other ARM(64) routerboards this way. ..., except that "refresh" does not work between versions, you need to disconnect/...
by spippan
Tue Aug 08, 2023 9:52 am
Forum: Forwarding Protocols
Topic: IS-IS
Replies: 134
Views: 53071

Re: IS-IS

Well, there probably was an important customer/prospect who insists on having IS-IS. In general I do not like that MikroTIk embarks on so many new projects, while leaving existing ones unfinished. I would say: first make sure all those red and yellow squares in the routing status page are removed, ...
by spippan
Tue Aug 08, 2023 12:00 am
Forum: General
Topic: ⚠️Security Issue: Changing rights / disable / delete the users has no effect on already logged in users.
Replies: 35
Views: 5679

Re: ⚠️Security Issue: Changing rights / disable / delete the users has no effect on already logged in users.

Play with the tools you have.
Reboot.
Done. :lol:
is this some kind of useless trolling?

a PROD router is not always elegible for "just a quick reboot"
imagine a BGP router has this issue and needs a reboot ...
by spippan
Mon Aug 07, 2023 10:38 pm
Forum: RouterOS beta
Topic: Feature request: Allow local user only if RADIUS is down
Replies: 11
Views: 4001

Re: Feature request: Allow local user only if RADIUS is down

as @pontus said: "This seems like a basic feature which is available on other platforms."

+1 for this feature
+1 too

default behaviour in cisco and fs
by spippan
Mon Aug 07, 2023 10:05 pm
Forum: General
Topic: FEATURE REQUEST: Kill Login User Sessions
Replies: 0
Views: 804

FEATURE REQUEST: Kill Login User Sessions

Mikrotik, please finally add the option to forcefully kill a logged in user session especially if a privileged user (user in group "full", for example) is logged in and kicks a "lower privileged" user or a user which DOES NOT EXIST any longer! this behaviour is very concerning ->...
by spippan
Mon Aug 07, 2023 10:00 pm
Forum: General
Topic: ⚠️Security Issue: Changing rights / disable / delete the users has no effect on already logged in users.
Replies: 35
Views: 5679

Re: ⚠️Security Issue: Changing rights / disable / delete the users has no effect on already logged in users.

Reboot. Problem solved. no, not at all ! rOS needs a "kill session" since FOREVER! even it would be on CLI only ... but not even that is available and it drives me crazy. in winbox there also should be a button to kill sessions - especially if i am the user with "full" privilege...
by spippan
Sat Aug 05, 2023 10:50 pm
Forum: Announcements
Topic: v7.10, 7.10.1 and more [stable] are released!
Replies: 366
Views: 130352

Re: v7.10, 7.10.1 and more [stable] are released!

What seemed to fix the VPLS was connecting to wifiwave station and disabling/enabling the vpls interface. No other changes. I am wondering why the interface did not reconnect once the link recovered and connectivity was restablished. had that issue on VPLS links also in the past when the underlying...
by spippan
Sat Aug 05, 2023 10:47 pm
Forum: General
Topic: Change stable to long term
Replies: 3
Views: 975

Re: Change stable to long term

backups (.rsc + binary) are vital and essential
ESPECIALLY when upgrading beta and rc versions - frankly, always when updating IMHO
by spippan
Sat Aug 05, 2023 5:51 pm
Forum: General
Topic: BGP IP blocking issue
Replies: 5
Views: 1084

Re: BGP IP blocking issue

As far as I have looked at and understood the relevant instructions, I apply it as follows, but I did not get a solution, where am I going wrong? /routing filter rule add chain=bgp3 disabled=no rule=\ "if (dst in 192.168.0.0/26 && dst-len in 24-32) {accept}" add chain=bgp3 disable...
by spippan
Sat Aug 05, 2023 3:49 pm
Forum: Announcements
Topic: v7.11rc is released!
Replies: 195
Views: 49183

Re: v7.11rc is released!

We are very sorry if you felt offended in some way. i saw that all old beta forum topics are erased i reported few time when v7.10 betaX started to show, that WG with IPv6 and non /64 suffix have a problem in 7.11beta topic there was also another user with same observation, and i clearly remember t...
by spippan
Sat Aug 05, 2023 3:27 pm
Forum: General
Topic: Change stable to long term
Replies: 3
Views: 975

Re: Change stable to long term

how does the problem described relate to the topic header "Change stable to long term" ??
by spippan
Sat Aug 05, 2023 3:22 pm
Forum: Forwarding Protocols
Topic: OSPF, Wireguard, and multiple path problem [SOLVED]
Replies: 10
Views: 4890

Re: OSPF, Wireguard, and multiple path problem [SOLVED]

This issue has been resolved. :D :D As is sometimes the case, the apparent problem wasn't really the issue. I'll be brief, but I hope this can help somebody else in the future. The design requires that sites 1-3 from the original diagram are able to access the public internet without first going th...
by spippan
Sat Aug 05, 2023 3:17 pm
Forum: Forwarding Protocols
Topic: Ros7 Ospf over wire guard, no neighbours
Replies: 2
Views: 2389

Re: Ros7 Ospf over wire guard, no neighbours

hello, ospf neighbor discovery using multicast address 224.0.0.0 - you should allow that address to flow inside the wg tunnels. or... you can specify ospf interface as ptp with unicast static neighbors. so... there are a lot of subnets to pass the wg tunnels : ospf itself and the rest of the networ...
by spippan
Sat Aug 05, 2023 1:40 pm
Forum: Forwarding Protocols
Topic: IS-IS
Replies: 134
Views: 53071

Re: IS-IS

by spippan
Sun Jul 30, 2023 8:53 pm
Forum: Announcements
Topic: WinBox v3.39 released!
Replies: 96
Views: 59395

Re: WinBox v3.39 released!

Tools, Check for updates.
Error: Upgrade file was corrupted.
it is literally the first thing the "important note" section states.
by spippan
Sun Jul 30, 2023 2:21 pm
Forum: General
Topic: A Winbox alternate or compile for Linux without Wine
Replies: 8
Views: 1621

Re: A WINBOX ALTERNATE OR COMPILE FOR LINUX WITHOUT WINE

Can they just put the source code online for us to just compile it! They are not selling this. They are selling the device and the router. So management software is not part of their product.! yes it is. take checkpoint or barracuda for example ... similar case. oh and making THIS a priority seems ...
by spippan
Sun Jul 30, 2023 2:18 pm
Forum: General
Topic: BGP IP blocking issue
Replies: 5
Views: 1084

Re: BGP IP blocking issue

firstly, consider a good read on that one
https://help.mikrotik.com/docs/display/ ... nd+Filters
by spippan
Sun Jul 30, 2023 2:16 pm
Forum: Announcements
Topic: WinBox v3.39 released!
Replies: 96
Views: 59395

Re: WinBox v3.39 released!

if i had not pressed SAVE it also would not work in the webGUI.
did that.
but thanks for the hint
by spippan
Sat Jul 29, 2023 7:26 pm
Forum: Announcements
Topic: WinBox v3.39 released!
Replies: 96
Views: 59395

Re: WinBox v3.39 released!

Thanks! I did not know that. ur welcome Try to hide the MPLS menu. It has several sub-menus. When (in Webfig) MPLS is removed (and even when all sub-menus are removed), in Webfig the MPLS item is completely gone, but in winbox it remains visible but when clicked it shows an "empty" (small...
by spippan
Sat Jul 29, 2023 7:03 pm
Forum: Beginner Basics
Topic: Home invasion
Replies: 18
Views: 3863

Re: Home invasion

Connect your Mikrotik device to ONT. VLAN ID 2. setup PPPoE with your A1 Internet username and password. see https://www.a1community.net/internet-fuer-zu-hause-449/modem-only-bei-ftth-257350 can confirm. just switched over to directly connect my 1100AHx4 to the ONT via ether12 added vlan 2 to ether...
by spippan
Fri Jul 28, 2023 2:04 pm
Forum: Beginner Basics
Topic: Home invasion
Replies: 18
Views: 3863

Re: Home invasion

Thank you everybody for the replies! I'll definitely try to replace the isp modem, not the converter and let you know how it goes (I'm on vacation). Those providers make it really difficult to change hardware, they don't want you going dark on them 🙂. hi. also from austria also A1 customer you migh...
by spippan
Fri Jul 28, 2023 1:59 pm
Forum: Announcements
Topic: WinBox v3.39 released!
Replies: 96
Views: 59395

Re: WinBox v3.39 released!

- better recognizable "active" state of the Safe Mode button (make it yellow or red when active, not just a different shade of grey) +1 - allow to "lower" a window in the windows list (e.g. via right-click), in addition to the current possibility of "rising" a window y...
by spippan
Wed Jul 26, 2023 11:49 pm
Forum: Announcements
Topic: WinBox v3.39 released!
Replies: 96
Views: 59395

Re: WinBox v3.39 released!

I am mostly inside. Usually I don't even switch on the lights in the office because I can't stand the light. And yet I don't want dark theme. Working with computers since 1980. I started on monochrome CRT screens so I know what it is like to have black background. Still don't like it. same with the...
by spippan
Wed Jul 26, 2023 11:43 pm
Forum: Announcements
Topic: WinBox v3.39 released!
Replies: 96
Views: 59395

Re: WinBox v3.39 released!

Those who want the black theme don't really work , they just want it as a whim " because others do it "... Try to work under the sun with a fuck–g black theme that doesn't let you see correctly what is present on the screen.... "don't really work" ... how come you conclude that?...
by spippan
Wed Jul 26, 2023 11:35 pm
Forum: Announcements
Topic: v7.10, 7.10.1 and more [stable] are released!
Replies: 366
Views: 130352

Re: v7.10, 7.10.1 and more [stable] are released!

After a while, it seems that Wifi is not stable on hAP AX3 on 7.10.2 ! Constant internet drops, or poor wifi quality. On my Old hAP AC2 wifi is muc much stable and better then this on hAP AX3. do have "detect internet" active? if so ... disable anything regarding it and reboot the device ...
by spippan
Sat Jul 22, 2023 3:44 pm
Forum: Announcements
Topic: MikroTik Devices Controller
Replies: 332
Views: 237536

Re: MikroTik Devices Controller

Well, of course for "just access points" it is much easier to do than for generic devices like MikroTik. I use UBNT access points, but their controller configures similar things as CAPsMAN. The generic solution for a network of routers is much more complicated. E.g. I would like to see a ...
by spippan
Sat Jul 22, 2023 2:54 pm
Forum: General
Topic: Feature requests
Replies: 1741
Views: 636262

Re: Feature requests

The "Input accept NLRI" filtering in BGP would be more usable when there is an extra "accept default route" option. As it is now, you can accept prefixes in certain subnets (as present in the address-list parameter of "Input accept NLRI"), but once you want to accept t...
by spippan
Tue Jul 11, 2023 3:00 pm
Forum: General
Topic: Feature requests
Replies: 1741
Views: 636262

Re: Feature requests

[FEATURE REQUEST] - Firewall History Log could it be possible to implement a firewall connections log (a seperate TAB for example directly in the ip>firewall window/section)? with maybe some settings like "max-conn-count", "max-lines" and/or "max-history-timeframe" (whi...
by spippan
Tue Jul 11, 2023 2:26 pm
Forum: General
Topic: OVPN 7.10.1
Replies: 4
Views: 877

Re: OVPN 7.10.1

it might be a problem you addressing the VPN clients within the same subnet as the LAN clients

EDIT: the routing engine in ros v7 is different from v6, so that might impact that config
by spippan
Mon Jul 10, 2023 4:54 pm
Forum: Announcements
Topic: v7.10, 7.10.1 and more [stable] are released!
Replies: 366
Views: 130352

Re: v7.10 and 7.10.1 [stable] is released!

Now you can upgrade to 7.11 beta4 there is fix for the WiFi issue
do you mean:
*) wifiwave2 - fixed interface hangs on IPQ6010-based boards (introduced in v7.9);
by spippan
Mon Jun 26, 2023 2:41 pm
Forum: General
Topic: Forum moderation volunteers
Replies: 238
Views: 37197

Re: Forum moderation volunteers



...for how long?
The posts already present "speak" for themselves.
good :)
by spippan
Mon Jun 26, 2023 2:35 pm
Forum: General
Topic: Forum moderation volunteers
Replies: 238
Views: 37197

Re: Forum moderation volunteers

Is anyone here interested in volunteering to approve and disapprove new member posts? Let me know, and let's fight the AI/LLM spam together :D
This time I'll just stop being an asshole, so I don't give any more problems.
...for how long?
by spippan
Mon Jun 26, 2023 1:37 pm
Forum: RouterOS beta
Topic: v7 and BFD, any ETA?
Replies: 149
Views: 27689

Re: v7 and BFD, any ETA?

After upgrade from 6.48.6 to 7.10 default timers bfd isn't correct 6.48.6 /routing bfd interface set [ find default=yes ] disabled=no interface=all interval=0.2s min-rx=0.2s \ multiplier=5 7.10 /routing bfd configuration add disabled=no interfaces=all min-rx=200us min-tx=200us multiplier=5 what is ...
by spippan
Mon Jun 19, 2023 5:33 pm
Forum: Announcements
Topic: v7.10, 7.10.1 and more [stable] are released!
Replies: 366
Views: 130352

Re: v7.10 [stable] is released!



For now, all BGPs uptime for 19:10:13 without interruption....
Still all up and working without problems. (2d 16:54:56)
BFD activated or BFD not in use at the moment?
by spippan
Mon Jun 12, 2023 10:13 pm
Forum: Forwarding Protocols
Topic: BGP -OSPF config help
Replies: 7
Views: 2737

Re: BGP -OSPF config help

I never understand why people want free professional consultancy work or even vendor consultancy work on forums.
as by a lot of recent posts here. i do not get it either
by spippan
Mon Jun 12, 2023 9:57 pm
Forum: Announcements
Topic: v7.10rc is released!
Replies: 183
Views: 53771

Re: v7.10rc is released!

Please revert to the old WebFig Style or at least give the user the choice. - The new one is confusing - Everything needs more clicks. - Traffic stats now have the size of a stamp - There is no (really, 0) advantage - The width of columns is not saved which is annoying. I'm using it on a 24" s...
by spippan
Sun Jun 04, 2023 9:41 pm
Forum: Forwarding Protocols
Topic: iBGP vs OSPF
Replies: 11
Views: 3275

Re: iBGP vs OSPF

You can read here for more details, but I'm sure you can find more design info in the public web, Facebook isn't the only one doing this design, ISP/Telcos who are up-to speed do as well: https://www.rfc-editor.org/rfc/rfc7938.html Preferably OSPF should be replaced with ISIS, but that's not suppor...
by spippan
Sat Jun 03, 2023 12:08 pm
Forum: Forwarding Protocols
Topic: iBGP vs OSPF
Replies: 11
Views: 3275

Re: iBGP vs OSPF

OSPF+BFD. BGP+BFD. This is a MikroTik problem that's likely resolved in 7.10 stable upcoming. The OSPF+BGP design is used by Facebook as well in their large-scale deployments. It's not a new design approach. hopefully yes. then this design surely should work fine. oh do they, didn't know about that...
by spippan
Wed May 31, 2023 12:53 am
Forum: Forwarding Protocols
Topic: iBGP vs OSPF
Replies: 11
Views: 3275

Re: iBGP vs OSPF

Use OSPF for underlay to learn loopbacks of all adjacent neighbours. Use iBGP to full-mesh with all loopbacks.
would this not just rank up convergence timers and overhead?

sure sounds like a quite good plan but timing, i guess may be problematic here 🤔
by spippan
Tue May 30, 2023 8:31 pm
Forum: RouterOS beta
Topic: v7 and BFD, any ETA?
Replies: 149
Views: 27689

Re: v7 and BFD, any ETA?

got very instable BFD sessions with min-rx/-tx below 50ms and a multiplier less than 3 in combination Sorry, but who does/needs that?!?! This is absolutely not a "usual" setup. When I turn my room light on and off so quickly, I don't need to be surprised when it pops... there are people h...
by spippan
Mon May 29, 2023 11:08 pm
Forum: RouterOS beta
Topic: v7 and BFD, any ETA?
Replies: 149
Views: 27689

Re: v7 and BFD, any ETA?

got very instable BFD sessions with min-rx/-tx below 50ms and a multiplier less than 3 in combination
by spippan
Sun May 28, 2023 4:34 pm
Forum: RouterOS beta
Topic: v7 and BFD, any ETA?
Replies: 149
Views: 27689

Re: v7 and BFD, any ETA?

wow ... it really is happening.
awesome
2023-05-28 15_32_10-.png
by spippan
Sun May 21, 2023 12:52 pm
Forum: General
Topic: Any info about this ? ZDI-23-710 CVE-2023-32154
Replies: 48
Views: 7998

Re: Any info about this ? ZDI-23-710 CVE-2023-32154

blog = new help docs? No, blog = https://blog.mikrotik.com/ But nothing has been posted there for nearly two years... thanks. totally forgot about that one anyway, hoping there will be a fix out soon for those not using ipv6 the temp. fix/workaround should mitigate the problem a bit at least.
by spippan
Sat May 20, 2023 6:29 pm
Forum: General
Topic: Any info about this ? ZDI-23-710 CVE-2023-32154
Replies: 48
Views: 7998

Re: Any info about this ? ZDI-23-710 CVE-2023-32154

Blog entry following soon
Blog? I did not know it still existed...
blog = new help docs?
by spippan
Fri May 19, 2023 4:12 am
Forum: Beginner Basics
Topic: Update / Upgrade confusion
Replies: 11
Views: 1584

Re: Update / Upgrade confusion

🤦‍♂️ both
by spippan
Thu May 18, 2023 7:12 pm
Forum: Beginner Basics
Topic: Update / Upgrade confusion
Replies: 11
Views: 1584

Re: Update / Upgrade confusion

also, do not forget to backup your v6 config
by spippan
Thu May 18, 2023 6:35 pm
Forum: Beginner Basics
Topic: Update / Upgrade confusion
Replies: 11
Views: 1584

Re: Update / Upgrade confusion

Ok thank you guys for the clarifications.. Now i have another router. A hAP AC2 with up to date 6.49.7 OS/Firmware. I downloaded the available upgrade here in the product page: https://mikrotik.com/product/hap_ac2#fndtn-downloads So i got the file: routeros-arm-7.9.npk I uploaded the file to the mi...
by spippan
Thu May 18, 2023 6:30 pm
Forum: Beginner Basics
Topic: Using HAP AX lite with a fftc router [SOLVED]
Replies: 9
Views: 1256

Re: Using HAP AX lite with a fftc router [SOLVED]

what is the desired goal here?

already looked up here?
https://help.mikrotik.com/docs/
by spippan
Sun May 07, 2023 8:26 pm
Forum: Announcements
Topic: v7.9 [stable] is released!
Replies: 242
Views: 55043

Re: v7.9 [stable] is released!

In today's world, there is no place for such a shitty design, looking like a 90ties Unix clone. Just look at Ubi Unifi interface - that's how modern interface should look like. you really cannot compare unifi (home and small business grade) with the flexibility and function richness of routerOS tha...
by spippan
Sun May 07, 2023 6:22 pm
Forum: Announcements
Topic: v7.9 [stable] is released!
Replies: 242
Views: 55043

Re: v7.9 [stable] is released!

running on 7.9 stable now hap ac² hap ac rb1100ahx4 all good so far. 2 container (kuma uptime, adguard) running well BGP sessions over wireguard peers also running fine. noticed bgp stability improvement when refreshing route informations. thanks for the effort to MT now ... back to waiting on BFD ;...
by spippan
Sun Apr 30, 2023 4:58 am
Forum: Beginner Basics
Topic: What type of VPN should I use to connect 4 sites?
Replies: 33
Views: 2702

Re: What type of VPN should I use to connect 4 sites?

No thanks, it bears no resemblance to the oPs question so not interested. He has four separate MT routers each with public internet, no need to add a single point of failure xtra pppoe router............??/ pppoe router is just a substitute for the isp/www for the lab. every of those 4 router is co...
by spippan
Sat Apr 29, 2023 11:52 am
Forum: Beginner Basics
Topic: What type of VPN should I use to connect 4 sites?
Replies: 33
Views: 2702

Re: What type of VPN should I use to connect 4 sites?

No capiches sipan. Are you saying that all four routers are connected to the same PPPOE router, and dont have their own publicly accessible IP. I do not understand your diagram in the least........ it's "spippan" the "pppoe router" simulates an ISP or "the www" i attac...
by spippan
Wed Apr 26, 2023 9:39 am
Forum: General
Topic: CHR perfomance with vmware
Replies: 18
Views: 1737

Re: CHR perfomance with vmware

Can I disable connection tracking feature if I use it for per-connection classifier with nat load-balancing? I thought I can not. Also I have thousands of connections in my real user traffic and the last screen is for real traffic, not any perfomance tests like btest or iperf. if you mean fast-trac...
by spippan
Wed Apr 26, 2023 9:25 am
Forum: Beginner Basics
Topic: What type of VPN should I use to connect 4 sites?
Replies: 33
Views: 2702

Re: What type of VPN should I use to connect 4 sites?

Hi, I have similar setup. Could enyone help me how to setup OSFP between those location connected thorough wireguard? Thank you some basic questions: 1. are you understanding OSPF and how it works? 2. how are you planing to troubleshoot and maintain it? 3. without any further information on your se...
by spippan
Mon Apr 24, 2023 11:02 pm
Forum: Beginner Basics
Topic: What type of VPN should I use to connect 4 sites?
Replies: 33
Views: 2702

Re: What type of VPN should I use to connect 4 sites?

just if someone might want to take a look less interfaces and sleeker configuration (on the wireguard side at least) made a EVE-NG setup which works with EACH router of those 4 only having ONE wireguard interface and peers with each other NO routing (not static nor dynamic) NO firewalling just basic...
by spippan
Mon Apr 24, 2023 8:37 pm
Forum: RouterOS beta
Topic: v7 and BFD, any ETA?
Replies: 149
Views: 27689

Re: v7 and BFD, any ETA?

... would have been better to just use FRR instead ...
it would be just awesome if there would be native support for FRR in MT (like a npk package like the "rose" npk for example!) --- speaking of, is there a topic covering that route?
by spippan
Mon Apr 24, 2023 6:39 pm
Forum: RouterOS beta
Topic: v7 and BFD, any ETA?
Replies: 149
Views: 27689

Re: v7 and BFD, any ETA?

Kudos to the MikroTik team for keeping their cool given the tone by a few customers. Given that we're dealing with humans on either side of the keyboards I don't think they deserve the abuse they are receiving here, regardless of what their employers' strategy, roadmap and quality of delivery may b...
by spippan
Fri Apr 21, 2023 5:00 am
Forum: Beginner Basics
Topic: What type of VPN should I use to connect 4 sites?
Replies: 33
Views: 2702

Re: What type of VPN should I use to connect 4 sites?

Nope not aware, as I said I have no experience with OSPF. that has nothing to do with ospf it is the vpn peering among the 4 routers every router has 1 WG IF and 3 wg-peers all interfaces in a common /29 address space, which is also included in "allowed addresses" for the wireguard config...
by spippan
Fri Apr 21, 2023 3:36 am
Forum: Beginner Basics
Topic: What type of VPN should I use to connect 4 sites?
Replies: 33
Views: 2702

Re: What type of VPN should I use to connect 4 sites?

you know that only 1 wg IF is needed on each router and the rest is peer configuration, right?

after that OSPF or BGP if wanted/needed for route exchange
by spippan
Tue Apr 18, 2023 2:13 pm
Forum: Beginner Basics
Topic: What type of VPN should I use to connect 4 sites?
Replies: 33
Views: 2702

Re: What type of VPN should I use to connect 4 sites?

would interconnect those 4 sites with WIREGUARD and setup a OSPF instance for dynamic routing
so every router has 1 wg-interface and 3 peers and via those wg-interface you could setup OSPF (optionally; otherwise static routing)
MT_VPN_195487_18-04-2023.png
by spippan
Mon Apr 17, 2023 1:25 am
Forum: RouterOS beta
Topic: v7 and BFD, any ETA?
Replies: 149
Views: 27689

Re: v7 and BFD, any ETA?

Unfortunately they are not allowed.
Otherwise, they will lose the North American market.
pardon?
by spippan
Sat Apr 15, 2023 11:47 pm
Forum: Beginner Basics
Topic: Routing Specific Website To LTE
Replies: 7
Views: 1052

Re: Routing Specific Website To LTE

for Method 2:

before you add the routing mark, first mark the connection

then add routing mark only to those marked connections
did a similar configuration for a company about a month ago
by spippan
Mon Apr 10, 2023 4:25 pm
Forum: Announcements
Topic: v7.8 [stable] is released!
Replies: 425
Views: 139976

Re: v7.8 [stable] is released!

Thanks alot guys for the recomendations and guidance. Will upgrade the hex and keep the lites on v6.
for the time being ... if you do not need a certain function only available in v7, there is no big deal staying with v6 atm.
v7 still has some weird quirks sometimes. keep that in mind ;)
by spippan
Mon Apr 10, 2023 3:22 pm
Forum: Announcements
Topic: v7.8 [stable] is released!
Replies: 425
Views: 139976

Re: v7.8 [stable] is released!

for the switch v6->v7 you need to choose the "upgrade" channel on "check for updates" window Thanks alot. Is there any chance that upgrading to v7.8 will slow down any of those devices? hEX (S) should be fine. keep in mind, most of the time it is depending on your setup but as l...
by spippan
Mon Apr 10, 2023 3:31 am
Forum: Announcements
Topic: v7.8 [stable] is released!
Replies: 425
Views: 139976

Re: v7.8 [stable] is released!

Hi. My rb750gr3 and 2x hap lite haven’t got the update yet. They are all currently at 6.49.7 stable (firmware too). Do i need to wait for the update to come up? I saw other people using v7.x on rb750gr3, could region be the reason? Im in Europe/Cyprus. for the switch v6->v7 you need to choose the &...
by spippan
Thu Apr 06, 2023 6:35 pm
Forum: RouterBOARD hardware
Topic: New Hardware SPOILER!!! [RB L009UiGS-2HaxD] [SOLVED]
Replies: 48
Views: 13798

Re: Probably New Hardware SPOILER... [SOLVED]

On RouterOS 7.9rc2 file get-custom-defconf
thanks! gotta look into the package later tonight
by spippan
Thu Apr 06, 2023 6:34 pm
Forum: Wireless Networking
Topic: Radar detect problem
Replies: 33
Views: 16966

Re: Radar detect problem


I am going to install OpenWRT on these boxes and will post screenshots on the forum to show the comparison and usability of both.
@pnwise
did you manage to get a comparison with OpenWRT?
by spippan
Thu Apr 06, 2023 6:19 pm
Forum: RouterBOARD hardware
Topic: New Hardware SPOILER!!! [RB L009UiGS-2HaxD] [SOLVED]
Replies: 48
Views: 13798

Re: Probably New Hardware SPOILER... [SOLVED]

What is MikroTik RouterBOARD L009???
where did you get that from?
by spippan
Thu Apr 06, 2023 6:13 pm
Forum: Beginner Basics
Topic: please post firewall? [SOLVED]
Replies: 12
Views: 1689

Re: please post firewall? [SOLVED]

What exactly do you think I'm doing?? I've set up a lab! I'm getting familiar with Mikrotik. I'm getting familiar with routing, firewalling, and VLANs... before as you say, "playing WISP".. whatever the [insert something here] that means?? I swear.. open mouth, insert foot kind of guy I s...
by spippan
Tue Apr 04, 2023 11:56 pm
Forum: Beginner Basics
Topic: please post firewall? [SOLVED]
Replies: 12
Views: 1689

Re: please post firewall? [SOLVED]

Outstanding! Thank you for this kind replay so that I can 'digest'. -Richard not much to digest here - these are the def.conf FW rules on a RB CCR/CRS are shipped with no default config! PLEASE, for [insert something here] sake - get familiar and get GOOD with mikrotik, routing and firewalling befo...
by spippan
Mon Apr 03, 2023 12:44 pm
Forum: RouterOS beta
Topic: mDNS repeater feature
Replies: 330
Views: 101034

Re: mDNS repeater feature

On a serious note, I will endeavour to learn a bit about them before asking my usual 20 questions that will drive you bonkers....... Eh don't lower yourself by pandering to anyone's badgering. Given the total lack of documentation we don't know why IGMP proxy is working for some or what it's doing ...
by spippan
Sun Apr 02, 2023 6:03 pm
Forum: RouterOS beta
Topic: v7 and BFD, any ETA?
Replies: 149
Views: 27689

Re: v7 and BFD, any ETA?

just had to bring it up here xD
MTapr1stBFD.png
by spippan
Thu Mar 30, 2023 8:59 pm
Forum: Announcements
Topic: v7.8 [stable] is released!
Replies: 425
Views: 139976

Re: v7.8 [stable] is released!


I don't know if this will help with RB1100, ....

can confirm - running a RB1100AHx4 (v7.8) with vlan-filtering enabled on a single bridge which contains all ports 2-10 is hw-offloaded
no IGMP or DHCP snooping enabled
by spippan
Thu Mar 30, 2023 6:29 pm
Forum: RouterOS beta
Topic: mDNS repeater feature
Replies: 330
Views: 101034

Re: mDNS repeater feature


I'll get my documentation together and post a new thread so its easily findable.
looking forward to see
by spippan
Thu Mar 30, 2023 1:20 pm
Forum: Announcements
Topic: v7.8 [stable] is released!
Replies: 425
Views: 139976

Re: v7.8 [stable] is released!

May I ask, if anybody is using BGP route reflector and route reflector client roles. I have problems distributing l2vpn and vpnv4 routes. It looks like with normal (no role) iBGP these kind of routes are distributed, once switched to rr and rr client, they are gone. Are any special filters that sho...
by spippan
Tue Mar 28, 2023 3:05 am
Forum: RouterOS beta
Topic: BGP + ECMP
Replies: 16
Views: 9334

Re: BGP + ECMP

BGP routes recursively resolved on ECMP routes will also be ECMP, see here:
https://wiki.mikrotik.com/wiki/Manual:B ... interfaces

Feature where BGP creates multipath routes (BGP multipath) is not implemented at the moment.
also working in v7 ?
by spippan
Mon Mar 27, 2023 10:29 pm
Forum: RouterOS beta
Topic: mDNS repeater feature
Replies: 330
Views: 101034

Re: mDNS repeater feature


And what is this?
viewtopic.php?t=174354#p992598
good advice
by spippan
Mon Mar 27, 2023 9:24 pm
Forum: RouterOS beta
Topic: mDNS repeater feature
Replies: 330
Views: 101034

Re: mDNS repeater feature

Will you stop offending forum users?
maybe "metti ordine in casa tua" might be suitable here...

seen your post where you also uncomprehendingly behave alike sometimes, so ... could you maybe stick to the topic? for the sake of users which might want/"need" mDNS aid
thanks
by spippan
Mon Mar 27, 2023 9:20 pm
Forum: RouterOS beta
Topic: mDNS repeater feature
Replies: 330
Views: 101034

Re: mDNS repeater feature


What is this? "(then also added the LAN subnet + 192.168.1.0/24)"
he wanted to mark it ITALIC inside a
code 
section which does not work in this forum

see:
code block text with [i]italic fomating [/i]inside 
by spippan
Mon Mar 27, 2023 8:58 pm
Forum: General
Topic: CHR perfomance with vmware
Replies: 18
Views: 1737

Re: CHR perfomance with vmware

Is it any perfomance tests for CHR working on vmware? I am trying to get 10gbps with simple routing + nat load balancing (per connection classifier feature) and I cannot get more than 5gbps. I use 8 core CHR ver 7.6-7.8 with vmxnet3 network cards at esxi 7. I don't see cpu bottleneck (no CHR cores ...
by spippan
Sun Mar 26, 2023 4:43 pm
Forum: Announcements
Topic: v7.9beta [testing] is released!
Replies: 118
Views: 26390

Re: v7.9beta [testing] is released!

Impressive amount of work done here, regardless if what anyone specifically wanted didnt get done. The paperwork alone is not trivial, just imagine the testing and integration involved. Kudos to the dev team and test team. 100% true. good someone pointed it out. regardless the BFD topic, people get...
by spippan
Sun Mar 26, 2023 4:37 pm
Forum: RouterOS beta
Topic: mDNS repeater feature
Replies: 330
Views: 101034

Re: mDNS repeater feature

even the edgerouter has a mdns repeater..
Ever home user needs mDNS. Don't know why mikrotik keeps ignoring this.
why would someone need to have that? worse, why even relay such network noise?
by spippan
Wed Mar 22, 2023 2:43 pm
Forum: Beginner Basics
Topic: a simple question about Mikrotik ports ?
Replies: 7
Views: 575

Re: a simple question about Mikrotik ports ?

As diagram shows there are 3 switch chips. I can't recall the specific hardware offloading rules, but it best to keep VLANs from crossing the switch chips - so more like 3 "special" groups. hw-offloading is disabled on bonds, IGMP/DHCP snooping activated. vlan(s) crossing chips is not a b...
by spippan
Wed Mar 22, 2023 2:22 pm
Forum: Announcements
Topic: v7.8 [stable] is released!
Replies: 425
Views: 139976

Re: v7.8 [stable] is released!

running a hAP ac², hAP and a RB1100AHx4D on 7.8 without any issues or reboots. even running wireguard and BGP sessions with no problems on it. 4 VLANs and the rb1100 does the inter-vlan routing with remarkable speeds please, as far as possible/feasable, do a FRESH netinstall to problematic devices. ...
by spippan
Tue Mar 21, 2023 9:29 pm
Forum: General
Topic: Throughput Performance issue on RB-3011UiAS
Replies: 6
Views: 550

Re: Throughput Performance issue on RB-3011UiAS

maybe (i am not sure right now) but maybe the encryption algorithm negotiated between the 2 routers is not hardware accelerated and has to be processed by the cpu please consult that table for your setup if your configuration has hw-acceleration possibilities https://help.mikrotik.com/docs/display/R...
by spippan
Tue Mar 21, 2023 2:36 pm
Forum: Announcements
Topic: MikroTik Devices Controller
Replies: 332
Views: 237536

Re: MikroTik Devices Controller

...give RouterOS 7 proper configuration transactions... +100 for that would be a killer upgrade (checkpoint, VyOS, barracuda,.... all those vendors have something alike for years now) Pretty much all of the network vendors (except JunOS frankly) have one or more of these exact problems and it is ce...
by spippan
Tue Mar 21, 2023 1:16 am
Forum: General
Topic: Throughput Performance issue on RB-3011UiAS
Replies: 6
Views: 550

Re: Throughput Performance issue on RB-3011UiAS

note, if you are using the same subnets on both sites you'll need to do NAT between the two sites
by spippan
Mon Mar 20, 2023 11:59 pm
Forum: General
Topic: Throughput Performance issue on RB-3011UiAS
Replies: 6
Views: 550

Re: Throughput Performance issue on RB-3011UiAS

please do not use the BT tool on these 2 routers if they are en-/decrypting ipsec

setup 2 clients on both ends (pc behind RB1100 and another one behind 3011) and run a iperf3 test between the 2 ENDPOINTS not BT tool between the routers!

S: iperf3 -s
C iperf3 -P8 -b0 -c [IP of "S"]
by spippan
Mon Mar 20, 2023 3:09 pm
Forum: Announcements
Topic: MikroTik Devices Controller
Replies: 332
Views: 237536

Re: MikroTik Devices Controller

Hmm, I wonder if this video is about the devices controller:
https://www.youtube.com/watch?v=kKnYhWnch0Q
might be CAP AX (XL)
by spippan
Fri Mar 17, 2023 5:34 pm
Forum: Announcements
Topic: v7.8 [stable] is released!
Replies: 425
Views: 139976

Re: v7.8 [stable] is released!

You can set up a samba server by using a container... I wish MT do the samba server Hikvision compatible. MT claims that Hikvision is using some strange settings but with others NAS the Hikvision cameras are working. Which conteiner do you mean? Do you have already any in use? maybe checkout this o...
by spippan
Wed Mar 15, 2023 8:27 pm
Forum: General
Topic: What model to use?
Replies: 34
Views: 2272

Re: What model to use?

When you say service - is there any chance you are referring to a circuit ? Asking for the sake of clarity. Yeah a circuit, I wrote it as a "service" in terms that we give them the "service" of connecting them to the internet. But in the case of our ISP they call it a circuit. I...
by spippan
Wed Mar 15, 2023 3:45 pm
Forum: Announcements
Topic: v7.8 [stable] is released!
Replies: 425
Views: 139976

Re: v7.8 [stable] is released!

Hi, Im just wondering why introducing 7.9 take too much time? :) Isnit gonna be revolutionary build? :) What you wish for? I would like to see: seamless roaming including 800.11v, compatible samba with Hikvision cameras, thats all :) what do you even mean by "too much time"? 7.8 [stable] ...
by spippan
Tue Mar 14, 2023 10:33 pm
Forum: Announcements
Topic: v7.8 [stable] is released!
Replies: 425
Views: 139976

Re: v7.8 [stable] is released!

Is there any ETA for a new version that fixes all these OVPN problems? I depend a lot on them and, right now, it's unusable, the routers are constantly overloaded and rebooting. I think this is a really important bug that should have been addressed right away... downgrade to a firmware where it wor...
by spippan
Mon Mar 13, 2023 11:16 am
Forum: Announcements
Topic: v7.8 [stable] is released!
Replies: 425
Views: 139976

Re: v7.8 [stable] is released!

OVPN stability is horrible for me as well...
Wireguard has been rock solid so far for me on Mikrotik - Would suggest to give it a try!
would not consider it rock solid but WAY BETTER than OVPN implementation
(and more lightweight and faster to configure)
by spippan
Sun Mar 12, 2023 11:17 pm
Forum: RouterOS beta
Topic: VxLAN example configuration
Replies: 19
Views: 35323

Re: VxLAN example configuration

No need, working on it, almost there......... https://forum.mikrotik.com/viewtopic.php?t=194310#p989515 That was effort #3 ( vxlan over wireguard ) effort #2 is through DHCP options effort #1 is via WG and EOIP ( not yet done as have to deal with where internet comes from on spanned subnets) All th...
by spippan
Sun Mar 12, 2023 8:01 pm
Forum: RouterOS beta
Topic: VxLAN example configuration
Replies: 19
Views: 35323

Re: VxLAN example configuration

Do you have a vxlan over wireguard example. Im confused as to the local address I assumed these would be addresses anchored to a local wireguard address at each end just not sure if the VTEP setting applies only to an external vxlan aware device and not used when the MT is the VXlan smart device? y...
by spippan
Fri Mar 10, 2023 3:06 pm
Forum: Announcements
Topic: v7.8 [stable] is released!
Replies: 425
Views: 139976

Re: v7.8 [stable] is released!

- in v6 the "bgp networks" have a "synchronize" option. without that, the prefix will be announced even when the route is not present. v7 no longer has this option, it will advertise ONLY prefixes that actually exist in the routing table. so any "bgp networks" in v6 th...
by spippan
Mon Mar 06, 2023 3:54 pm
Forum: RouterOS beta
Topic: v7 and BFD, any ETA?
Replies: 149
Views: 27689

Re: v7 and BFD, any ETA?

No, from the Netherlands. You can see my username, right?
okay. no cannot see any signatures (also i cannot change mine as i noticed last week)
did not know about hamnet until today. great work. currently reading the documentation about it. cheers
by spippan
Mon Mar 06, 2023 1:23 pm
Forum: RouterOS beta
Topic: v7 and BFD, any ETA?
Replies: 149
Views: 27689

Re: v7 and BFD, any ETA?

...Release the d*mn thing so that we can have link failure detection again!
...or at least help them TEST that thing and provide feedback for that!

(OT: r u an hamnet admin from germany?)
by spippan
Mon Mar 06, 2023 12:10 am
Forum: Announcements
Topic: v7.8 [stable] is released!
Replies: 425
Views: 139976

Re: v7.8 [stable] is released!

and "...Just install version 6 and wait..." is not suitable for recent devices. i do not know if you knew, but also some v6/v7 devices are not able to run v6 if they are shipped and FACTORY INSTALLED with v7! (i got 3 CCR2004-1G-12S+2XS which i cannot operate with v6 because of that very ...
by spippan
Mon Mar 06, 2023 12:08 am
Forum: Announcements
Topic: v7.8 [stable] is released!
Replies: 425
Views: 139976

Re: v7.8 [stable] is released!

So it seems I was wrong. On latest firmware RB4011 starts randomly, sometimes it boots normally, sometimes it hangs. I bought serial cable ... just to see what is happening during boot. (if you are lucky... RB4011 in netinstall shows "READY" and clicking install just shows "Sending o...
by spippan
Mon Mar 06, 2023 12:03 am
Forum: RouterOS beta
Topic: v7 and BFD, any ETA?
Replies: 149
Views: 27689

Re: v7 and BFD, any ETA?

There is not much to discuss w.r.t. the topic. v7 has no BFD, we all know that. It is claimed to be "a work in progress" for over 1.5 year now, but nothing is happening. What we discuss here (and in other topics) apparently has no influence at all, it keeps getting delayed. what recently ...
by spippan
Fri Mar 03, 2023 5:13 pm
Forum: General
Topic: Feature requests
Replies: 1741
Views: 636262

Re: Feature requests

All junk, your nick and your picture does not say Jones, only you are obsessed with adding it at the bottom, otherwise people would not even know.
what does it bother you?
does it hurt someone?

way less offensive than many of your posts anyways. just leave it be, fgs
by spippan
Fri Mar 03, 2023 4:36 pm
Forum: Announcements
Topic: v7.8 [stable] is released!
Replies: 425
Views: 139976

Re: v7.8 [stable] is released!

@actck you have 2 posts and you are such clever....I do welcome new feature, I have only few devices feom MT but I laready use QOS CAKE, ZEROTIER,WIREGUARD almost all new features introduced in v7. And it is pretty stable on my setup. I do understand it is problem for big ISP that some features are...
by spippan
Fri Mar 03, 2023 4:28 pm
Forum: Announcements
Topic: v7.8 [stable] is released!
Replies: 425
Views: 139976

Re: v7.8 [stable] is released!

I do need a rock solid reliable OS that runs PPPoE (client and server) and doesn't break SFP modules that previously worked. Routing protocols matter (it's a router!), firewall matters, and tunnels matter. Beyond that I'd be thrilled if everything else was added through separate packages like in th...
  • 1
  • 2