MikroTik RouterOS 6.24 Mikrotik Cloud Core Router CCR1016-12G jan/14/2015 11:38:11 system,error,critical System rebooted because of kernel failure jan/14/2015 11:38:11 system,error,critical router was rebooted without proper shutdown, prob This is not for the first time I can see this message. Do yo...

Hello guys, there is a huge I'm sorry i need to tell you here! I need to appologise for my doubts. The server did gather many information and data from MikroTik, what was not in case of UBNT router. The server had a serious issues with IO after the replacement of SCSI disks with SATA disks. The load...

Have to admin i have been getting strange ICMP's on my ccr1036. my monitoring machine zabbix pings through these to different devices. I can see 10ms latency .... using fping send 2 avg result (thats not good). I am pretty sure it was a bit more stable at 6.19 running 6.22 Exactly. I need to monito...

Are the responses going THRU the router also affected? Why are pings to the router so important? That is the point! Pings to the router are mentioned because they should be clean in every case. All the pings are affected. Please take a look at the ping to the provider's GW. (The peak ping after cha...

jaroslavhala I do not have any insight into this issue but I have a similar observation from ubiquiti wireless devices vs mikrotik wireless. Attached is a smoking graph where the switch from a Nanostation M5 to a Sextant5 is apparent. Screen Shot 2014-12-01 at 12.40.16 AM.png Thank you for you comm...

@ SystemErrorMessage In your experience does the CCR have issues with bridged physical ports? Hi, the issue is not related to the physical ports. I received a new/replaced peace of HW and the behavior is the same. I don't use bridges. You can see on the picture, that the pings are high for Mikrotik...

The CCR performs poorly with virtual networks but performs very fast on physical networks. Ping times significantly increase using virtual networks (internal bridge routing, VPN, etc) while physical routing remains really fast. Even VPN is unstable at full loads and disconnects every few minutes wh...

Hello, I think this discussion is exactly about the problem I'm dealing with. My CCR started to be unstable and after come crash and reboot, there was only "Starting services" on the LCD, so i had to replace it for a while with my backup device UBNT EdgeMAX PRO router. Can you please expla...