Sorry for the delay I have only just had a chance to revisit the issue.

Thank you very much anav that works perfectly.

Am i able to route remote winbox sessions in the same way as it suffers with the same issue.

Please see attached file

I might have made my life more difficult by updating to router OS 7.8

Hi All, I have a RB1100 6.48.6 with two internet connections - Connection 1 - Starlink - DHCP - Carrier grade nat - Default route cost 0 Connection 2 - Fixed Wireless Access - PPPOE - Public IPv4 - Default route cost 1 Due to CGN i would like to access my cctv via the public address but when i conne...

Hi All,

Are there any guides on setting up VRF in v7?

My ISP Uses a vlan for data and another for voice so I need to put a SIP ata in it's own VRF on that vlan.

Thanks

Sorry, yes i should have attached :)

My ISP provides data on VLAN 10 for data and VLAN 20 for voice.

The data VLAN is working fine.

I've added the voice vlan and a spare ethernet port 4 into its own bridge, do I need to do anything to untag on ethernet 4?

The phone gets an IP address but won't register

:)

So I've had FTTP installed at home but my RB962 is not up to the job as the cpu gets pinned around 300mbps

Can anyone recommend a router board that will keep up with the full 900mbps?

Ideally looking for something without a fan and I don't require wireless either.

Awesome thanks

Try these 5 lines. just add your own TLD's, it will add an address list for each TLD. Run it again to update them. You will need to create a firewall rule to drop the TLD lists. Beware the lists are huge (who woulda guessed) and if you load them into memory they will take it all, so select your TLD...

Hi all,

I have a remote router that wasn't locked to an LTE channel and would like to run a scan to see what channels are available remotely.

Does anyone have a script that would scan and store the data in a file?

Thanks

Hi all, i have two routers 1 - main office router 2 - barn router The main office router issues DHCP and has the main broadband connection. The barn router is just running as a wireless ap with all the ports in a bridge. It's linked back to the main office router with a wireless bridge. Due to a com...

Hi all, I have an EOIP tunnel that's been working fine for about 6 months and now it keeps dropping. In the log i see "Bridge port received packet with own address as source address." Main Site - main site.png # may/17/2019 08:43:46 by RouterOS 6.43 # software id = FD5Z-C7QU # # model = 20...

this has caused me a nightmare

Lesson learnt that's for sure.

i'm so glad the script didn't reset any routers but still it's going to take a few days to sort them all out

Evening all,

So i've just configured my first L2TP VPN server in my router.

if i had multiple users how could i stop them from being able to see and or accessing each others machines?

Thank you but i managed to get it working.

Hertzner require you to set the mac address of the wan interface to one they provide with the static ip address.

Hi all, I'm after a little bit of help in running router os inside of proxmox. So proxmox is running on Debian on a server that is hosted by hertzner. i have followed this guide to get download a copy of the CHR image and create the container - https://wiki.mikrotik.com/wiki/Manual:CHR_ProxMox_insta...

Good afternoon,

does any one know if these are supported on a mikrotik router?

https://www.versatek.com/product/vx-160 ... lco-grade/

thanks

Hi all, so i've recently passed my MTCNA and i'm really enjoying working with mikrotik hardware. So i'd like to know a bit more about what i need to do with the firewall to stay safe. Here is my current config: /ip firewall filter add action=drop chain=input comment="Drop DNS on WAN" dst-p...

Evening all,

We have a site that requires the voltage being checked fairly often.

is there any way to retrieve the system health voltage via ssh?

Cheers
Gareth