Community discussions

MUM Europe 2020

Search found 4 matches

by nickerpick
Tue Nov 21, 2017 6:55 am
Forum: General
Topic: Vlan on 6.41RC need help to understand how it works.
Replies: 11
Views: 2156

Re: Vlan on 6.41RC need help to understand how it works.

Here is the Bridge config. /interface bridge add admin-mac=64:D1:54:05:82:36 auto-mac=no name=bridge1 add fast-forward=no name=bridge2 pvid=2 /interface bridge port add bridge=bridge1 interface=ether2 add bridge=bridge2 interface=ether3 add bridge=bridge1 interface=ether4 add bridge=bridge2 interfac...
by nickerpick
Fri Nov 17, 2017 12:21 am
Forum: Beginner Basics
Topic: tcp/554 and tcp/555 open, why?
Replies: 10
Views: 1324

Re: tcp/554 and tcp/555 open, why?

Check if you have rules for dstnat. I think the NAT table is beeing read before the filter table and if you don't drop per default this Traffic ist allowed. A Client in your LAN is than answering the TCP Syn requests.

Gesendet von meinem Moto G (4) mit Tapatalk
by nickerpick
Thu Dec 11, 2014 10:55 am
Forum: Beginner Basics
Topic: vlan interface: attaching to physical vs bridge interface
Replies: 1
Views: 487

vlan interface: attaching to physical vs bridge interface

Hi all, I am new to RouterOS and try to get familiar with VLANs on Mikrotiks. I have some difficulties in understanding the difference between attaching a vlan interface to a phyical interface, than adding the vlan interface to a bridge and attaching the vlan interface to a bridge interface directly...
by nickerpick
Fri Dec 05, 2014 10:06 pm
Forum: General
Topic: Cisco - Mikrotik VLAN TRUNK and STP
Replies: 4
Views: 3747

Re: Cisco - Mikrotik VLAN TRUNK and STP

I had the same problem. The access ports are receiving BPDUs with vlan information. I think that is the reason the access ports are in state BKN (broken). The solution is to configure the access ports as trunk ports and only allow one vlan in those trunks. After you have changed the access ports to ...