Although 12 years have passed, I will still write the notes, since I myself was looking for an answer.
Now in "ip firewall mangle" is among the action "action = clear-df".

The answer is exhaustive. Thank you!

It seems that the answers to my questions are the greatest secret ...

What are all the restrictions in the RU-version? Wi-Fi power? Wi-Fi channels?
If I buy rb951, rb2011 can I use 1 watt wi-fi?
Limitations except wi-fi?
Is the magic netinstall able to help?

"local distributor" does not know absolutely nothing and does not want to find out anything. This is why you see this topic on the forum. So any mikrotik device, beginning in 2018, will have regional restrictions for Russia, right? And how for other countries? Is there an international ver...

Hello! This month I bought 2 HapLite from a local reseller. Territorially it is central Russia. During the Wi-Fi setup, I encountered limitations on the choice of the region and its parameters. In "interface wireless" may select only "frequency-mode=regulatory-domain" and "c...

At the moment I tested the 951Ui-2nD with three modems: Huawei E3272, Huawei E3372, ZTE MF831. Problems I did not see and "USB Power Reset" also works fine. Now the device is mounted on a remote location with Huawei E3272, we'll see how it will. Time will tell. But I still do not know the ...

With /flash folder working normally, thanks!

Hello! I have hAP 951Ui-2nD and i need to make backup config to internal memory. It's ok, but after reboot no seems no one files in internal storage, they disappeared. Also counters "Free HDD Space" and "Sector writes sinse reboots" and "Total sector writes" are freezed...

Hi!
Yesterday I bought hAP. How do I know whether the bug is fixed or not in my device?

Checked MikroTik S-RJ01 module at work. It works well in all modes - 10/100 (Full/Half duplex) and 1Gb. MDI/MDIX also works fine.

Thanks! About optic i unerstood, what about MikroTik S-RJ01? Can it work on 100Mbit? In description says "S-RJ01 is RJ45 SFP 10/100/1000M copper module" http://routerboard.com/S-RJ01 but in technical specification table data rate is 1.25Gbps

And this is personally MikroTik "feature" for all boards models or it depends of module model?
I'm planning to use modules MikroTik S-85DLC05D and MikroTik S-RJ01

Hello!
Say, perhaps to change the speed from 1Gb to 100Mbit using the optical 1,25G module? And if using a copper 1Gb SFP-module?
CCR1036-12G-4S , ROS 6.34

My cameras only have FTP option for upload images and not supported SMB.

More sadly...

Аnswered support:

Hello,

APPE is not too common used command on FTP server, currently we do not have
plans to support it,
We will consider it for the future.

Regards,
Sergejs

Very sadly....

Is it bug or feature of FTP-server? ROS 6.31 http://forum.mikrotik.com/viewtopic.php ... 41#p495941

MikroTik's FTP does not understand the command appe

Hello! There is a FTP-server on the MikroTik. The computer and one IP-camera with no problems use it. But other Chinese IP-camera only creates directories, but can not create files on the server. On another server that is not a MikroTik (it's NAS), the Chinese IP-camera creates the directories and f...

After talking with the support received the following information: It is: C418 - 100nF 16V 0402 Capacitator. It is filtering some frequencies in feedback chain, and it is not affecting normal work for the device. So - all in all it can be OK to have it work without it - just in some special occasion...

Hello! Recently bought a used RB800 and saw the damaged element on the board (possibly a capacitor). In general, the board is working, but would like to find out the nominal value element for its future replacement. A damaged element likely screwing the mounting nut - mounting hole very close to the...

Hello! I use some routers with wi-fi and when I do network hidden (hide-ssid) for mode "2ghz-onlyn" , no one client can not connect over the air. If a different value "band=2ghz-b/g/n" at a hidden network, the clients are connected and working. Here is an example of the configura...

Compelled use the service "cloud", because due to the messages "fetch" log was impossible to read. And now i'm not using DynDNS. So bad....

Is there some way to stop this?

I'm also need to stop this (maybe it some option in config for future releases?). Now a'm using ROS 6.23.

I have the same problem.... I have a script for DynDNS, which uses fetch for their work: # get the current IP address from the internet (in case of double-nat) /tool fetch mode=http address="checkip.dyndns.org" src-path="/" dst-path="/dyndns.checkip.html" :delay 1 :loca...