Community discussions

MikroTik App

Search found 177 matches

by cpresto
Fri Oct 02, 2020 12:53 pm
Forum: RouterBOARD hardware
Topic: hAP ac³
Replies: 42
Views: 13798

Re: hAP ac³

anav
Seriously, I must admit I have a VOIP Modem sitting right next to my CCR1009.
When RJ11 start exist in RB then ppl say, you have rj11, I buy it bcs I think it's support ADSL+ too :)
FXS is not for ADSL obviously, but to connect existing Customer's phone
by cpresto
Wed Sep 30, 2020 11:28 am
Forum: RouterBOARD hardware
Topic: hAP ac³
Replies: 42
Views: 13798

Re: hAP ac³

Believe me Normis "clearly labeled INTERNET" is not enough for tipical residential Customers ;-D
Is some cases they are even not able to find out an electrical plug... ;-D
Rgds
by cpresto
Wed Sep 30, 2020 10:55 am
Forum: RouterBOARD hardware
Topic: hAP ac³
Replies: 42
Views: 13798

Re: hAP ac³

Mikrotik offers unmatched troubleshooting possibility at Customer's site, especially at residential ones. Many time Customers made mistakes, but the didn't tell you at the phone, e.g. just plug&play a new AP, obviously with DHCP server on (...) and then call the WISP because "Internet conne...
by cpresto
Tue Sep 29, 2020 10:12 pm
Forum: RouterBOARD hardware
Topic: hAP ac³
Replies: 42
Views: 13798

hAP ac³

Nice router but something is still missing... - FXS port (hopefully 2); - colored WAN port (blu?) and PoE port (red), to avoid Customer's connection mistakes ... a good opportunity missed to made a rotuer to be used at residential Cusotmer's site. Something like this ... https://www.tp-link.com/it/h...
by cpresto
Mon Jan 13, 2020 8:53 pm
Forum: RouterBOARD hardware
Topic: MKT router with FXS
Replies: 8
Views: 5674

Re: MKT router with FXS

Any news about the "desired features"? Anything in roadmap? Such a CPE would be very useful, and will be widely used.
Dear MKT staff, please take note and try to start the developement …
by cpresto
Thu Sep 26, 2019 10:20 am
Forum: RouterBOARD hardware
Topic: CRS112-8P-4S-IN
Replies: 5
Views: 4447

CRS112-8P-4S-IN

The CRS112-8P-4S-IN switch can be powered either at 24 o 48V.
Il 48V is used, PoE output can also be configured @24V passive mode on selected ports, or all ports work in 48V (802.3af) mode?
Thank you,
Rgds
by cpresto
Thu Sep 26, 2019 9:45 am
Forum: RouterBOARD hardware
Topic: MKT router with FXS
Replies: 8
Views: 5674

MKT router with FXS

I think that the whole Mikrotik WISP community is waiting for a rotuer to be used as CPE at Customer's site, with following features: - good WiFi performance and coverage; - 2 FXS ports; - 1 PoE out (at least), to power up the radio; - affordable price Is such HW in roadmap? I'd like to use MKT inst...
by cpresto
Mon Oct 02, 2017 1:26 pm
Forum: RouterBOARD hardware
Topic: Which 80km fiber SFP+ modules 10G-ZR work
Replies: 12
Views: 5284

Re: Which 80km fiber SFP+ modules 10G-ZR work

Hello,
I'm looking for a working 10G-ZR work SFP+ transceiver with CCR, to make 2x45Km length SM fiber links.
According to your post, Fiberstor model SFP-10GZR-55 should work fine
http://www.fs.com/products/36982.html
Do you confirm?
Thank you,
Rgds
by cpresto
Mon Oct 02, 2017 11:12 am
Forum: RouterBOARD hardware
Topic: SFP+ more thank 40KM
Replies: 1
Views: 1184

Re: SFP+ more thank 40KM

Looking at https://wiki.mikrotik.com/wiki/Manual:Peripherals
it seems that Fiberstore SFP-10G31-40 works on CCR http://www.fs.com/products/29797.html
Fiberstore has also its SFP-10G-ZR model http://www.fs.com/products/11595.html, has anyone tested it on Mikrotik CCR?

Thanks
by cpresto
Mon Oct 02, 2017 11:04 am
Forum: RouterBOARD hardware
Topic: SFP+ more thank 40KM
Replies: 1
Views: 1184

SFP+ more thank 40KM

Hello, has anyone tested SFP+ transceiver that works on CCR on distance more than 40Km? There are two possibilities: - SFP-10G-ZR https://www.cisco.com/c/en/us/products/collateral/interfaces-modules/transceiver-modules/data_sheet_c78-455693.html For a link at 10Gbps. I can see online Cisco SFP+ tran...
by cpresto
Fri Jun 24, 2016 11:29 am
Forum: General
Topic: GPON support
Replies: 4
Views: 2759

GPON support

Hello Mikrotik staff,
it could be very useful and interesting to have support in Mikrotik routerboards for the entire GPON chain (OLT/ONT).
The ONT side is already available, could it be possible to imagine also the OLT side in future releases?
Thank you,
Rgds
by cpresto
Fri Jun 24, 2016 11:25 am
Forum: General
Topic: Mikrotik GPON FTTH Architetcure
Replies: 8
Views: 4833

Re: Mikrotik GPON FTTH Architetcure

Thank you for replies, in effect, using it with Mikrotik to serve a limited number of customers in a building in not worth while, because of the small price of BIDI SFP. E.g. a "OPTIC-SFP-3524S-02-SC" transceiver costs about 9€ and the price difference between a rotuerboard with one and te...
by cpresto
Thu Jun 23, 2016 5:42 pm
Forum: General
Topic: Mikrotik GPON FTTH Architetcure
Replies: 8
Views: 4833

Re: Mikrotik GPON FTTH Architetcure

Thank you for reply ZeroByte , yes, you are rigth. I'm new to GPON technology, I'm studying it's fundamentals in these days ... Do you know OLT SFP that works with Mikrotik? Have you ever tested such products? Just to display two of them available on the market:    http://www.fujitsu.com/downloads/O...
by cpresto
Wed Jun 22, 2016 7:09 pm
Forum: General
Topic: Mikrotik GPON FTTH Architetcure
Replies: 8
Views: 4833

Mikrotik GPON FTTH Architetcure

Hello, could it be possible to develop a GPON architecture to deliver FTTH services, using routerboards and SFPONU ? As described in the attached picture, a single "access switch" (or rotuer) might be used, with a SFPONU, connected to a splitter. The vertical distribution should be made of...
by cpresto
Wed Jun 22, 2016 2:24 pm
Forum: RouterBOARD hardware
Topic: BIDI (WDM single fiber) SFP Transceiver
Replies: 2
Views: 2035

Re: BIDI (WDM single fiber) SFP Transceiver

Thank you for your reply. Looking on the Net is possible to find some articles referring to WDM on multimode fiber ... http://fiberoptical-blog.blogspot.it/2013/08/normal-sfp-bidi-can-also-be-deployed.html but most of them, in effect, must be used in single mode cables. One more question ... Is ther...
by cpresto
Thu Jun 16, 2016 11:52 am
Forum: RouterBOARD hardware
Topic: BIDI (WDM single fiber) SFP Transceiver
Replies: 2
Views: 2035

BIDI (WDM single fiber) SFP Transceiver

Hello, I would like to use Mikrotik routerboards on a Prysian Verticasa infrastructure, that delivers single fiber per Customer. According to   http://wiki.mikrotik.com/wiki/Supported_Hardware#SFP_modulescurrently there are several BIDI WDM supported, but only single mode. Is there any Multi-Mode WD...
by cpresto
Mon Jul 27, 2015 5:00 pm
Forum: RouterBOARD hardware
Topic: RB260GSP and RouterOS
Replies: 3
Views: 1123

Re: RB260GSP and RouterOS

Yes,
but it is bigger, more expensive and it has no PoE out ...
by cpresto
Sun Jul 26, 2015 12:53 pm
Forum: RouterBOARD hardware
Topic: RB260GSP and RouterOS
Replies: 3
Views: 1123

RB260GSP and RouterOS

RB260GSP supports only SwOS.
It has 4 Gbe PoE and one SFP port, so it might be a perfect router for small nodes.
Do you have in roadmap a similar product witsh RouterOS support?
It will be great ...

Thanks
by cpresto
Fri Dec 23, 2011 6:59 pm
Forum: General
Topic: Mikrotik Web Proxy
Replies: 0
Views: 704

Mikrotik Web Proxy

Hello, I would like to build an advertisement based hotspot network using, if possible, RoS. In order to avoid banners, blocked by all browsers, I would like to create a system that understands when the user changes the page that he is looking at and redirect him the the desired advertisement page f...
by cpresto
Wed Oct 05, 2011 7:21 pm
Forum: The User Manager
Topic: Mikrotik Hotspot in a Box with thermal printing and SMS
Replies: 25
Views: 20141

Re: Mikrotik Hotspot in a Box with thermal printing and SMS

Hello, we developed a similar system for our hotspot network, but based on a normal printer. The user (personell at the desk, e.g.) has three (or more) simple button on his browser, and choosing one of them the right uid/pwd o serial n° is printed on a normal printer. The action is not performed on ...
by cpresto
Wed May 19, 2010 10:56 am
Forum: RouterBOARD hardware
Topic: RB411AR Power Consumption
Replies: 1
Views: 945

RB411AR Power Consumption

Hello,
are there data about routerboards power consumption?
In the data sheet are listed simply voltage and current needs, what I would like to know is power consumption related to the wireless card(s) installed.
by cpresto
Tue Jul 14, 2009 5:12 pm
Forum: General
Topic: Newsletter #19
Replies: 20
Views: 4973

Re: Newsletter #19

RB411AR...well done MT Team, seams to be the reply to UBNT WISP Station http://www.ubnt.com/products/ws5.php. :wink:
Unfortunately the embedded interface is a 802.11b/g one, do you have in roadmap 802.11a version?
Rgds
by cpresto
Mon Mar 30, 2009 6:11 pm
Forum: General
Topic: Standalone WEB server (very useful)
Replies: 11
Views: 5856

Re: Standalone WEB server (very useful)

Thank you Andrea, you're based in Malta, but your name sounds Italian... :D I'd a look to TowNet Interface a couple of days ago, it seems to be what me and others WISPs were looking for.. :D They are selling it via their own brand WispMax (http://www.wispmax.com) at 2,20€ each. I think that I'll buy...
by cpresto
Thu Jan 22, 2009 8:26 pm
Forum: General
Topic: ROS "stable" vs "previos stable"
Replies: 1
Views: 715

ROS "stable" vs "previos stable"

Probably a stupid question, but... what is the difference between firmware versions described as "stable" and "previous stable" ? E.g. right now the stable one is 3.19 and the previos stable one is the 3.13. Which one should I safetly install in my systems? :?

Rgds
by cpresto
Tue Dec 30, 2008 12:54 pm
Forum: General
Topic: DHCP Server and Bridge
Replies: 1
Views: 950

Re: DHCP Server and Bridge

Ok,
I've solved the problem creating an IP drop rule in the Bridge Filter, as described in the picture. I suppose that the problem was due to the fact that IP firewall cannot be used on bridged interface, but Bridge filter should be used instead.
Rgds :D
by cpresto
Mon Dec 29, 2008 5:58 pm
Forum: Wireless Networking
Topic: hack client
Replies: 2
Views: 1337

hack client

I've got the following problem: if an unauthorized client tries to associate the Access Point, all others clients will be disconnected and then connected once again.
ROS is 3.14 with access list and WPA-PSK security.
Any idea about possible reasons for this strange behaviour?
Rgds
by cpresto
Wed Dec 24, 2008 1:09 pm
Forum: General
Topic: DHCP Server and Bridge
Replies: 1
Views: 950

DHCP Server and Bridge

Hi all, as a WISP, I've the following scenario at Customer's site: - CPE based on RB411 with ROS 3.14; - CPE is configured in NAT Router with 3 IP addresses: static IP address on wireless interface, static IP address on eth interface, PPPoE client on wireless interface; - static IP address on wirele...
by cpresto
Sat Oct 25, 2008 12:20 pm
Forum: General
Topic: SIP and others
Replies: 7
Views: 3301

SIP and others

Hello, what I would like for next RouterOS releases is: - SIP client To offer VoIP services to my Customers right know I have to use ATA (Linksys) placed behind MT CPEs. In this way, ATA works as router and MT CPE in bridge, so I cannot use all RouterOS capabilities: customer's network is behing ATA...
by cpresto
Wed Jul 30, 2008 9:10 pm
Forum: General
Topic: EoIP tunnels
Replies: 7
Views: 2721

Re: EoIP tunnels

Thank you gmsmstr/cmit, regarding broadcast, probably ARP will go also on backbone, but PPPoE will not. I've tested this, referring to the posted picture: if I enable 3 PPPoE servers on MT1 (on backbone, EoIP tunnel1, EoIP tunnel2 interfaces), I can authenticate on access network only to the corresp...
by cpresto
Tue Jul 29, 2008 7:36 pm
Forum: General
Topic: EoIP tunnels
Replies: 7
Views: 2721

Re: EoIP tunnels

Thank you Cmit,
I've tested EoIP solution in my lab and on-site(with ROS 3.11).
Unfortunately, in my lab everything is ok but on-site I'm experiencing extensive data loss (about 40%) :( . Do you have similar results? In this conditions is not possible to use EoIP tunnels for me.

Rgds
by cpresto
Fri Jul 25, 2008 1:28 pm
Forum: General
Topic: EoIP tunnels
Replies: 7
Views: 2721

Re: EoIP tunnels

Thank you cmit, my mistake was exactly the EoIP MAC address: i left the one assigned by WinBox... With this architecture, there are two possible solutuions on Access concentrator: - one PPPoE server instance for each EoIP tunnel, in order to keep separate access networks broadcast - one PPPoE server...
by cpresto
Thu Jul 24, 2008 2:03 pm
Forum: General
Topic: EoIP tunnels
Replies: 7
Views: 2721

EoIP tunnels

Hello, I would like to deploy my WISP network as per attached picture: • A common backbone network • Several access networks, each with its own broadcast domain • A unique access concentrator that receives PPPoE requests from Customers from their access networks The point is on how to connect Access...
by cpresto
Mon May 26, 2008 9:09 pm
Forum: Wireless Networking
Topic: with money as no object, I need a real MT backhaul solution
Replies: 42
Views: 10917

Re: with money as no object, I need a real MT backhaul solution

Thank you Kijomabb,
I didn't pay much attention to pigtails because they are very short. Currently I'm using these type
http://www.pacwireless.com/products/cab ... lies.shtml
do you suggest something else?

Rgds
by cpresto
Mon May 26, 2008 8:15 pm
Forum: Wireless Networking
Topic: bonding vs NStreme2
Replies: 3
Views: 2423

bonding vs NStreme2

Hi all,
thinking to pt-to-pt links, what is beter solution?
NStreme2 provides full duplex, bonding seems to offer better perfomance.
Is it possible to build a "comparison matrix" based on pratical experiences? E.G. Parameters to be considered: throughput, latency, reliability, range
by cpresto
Mon May 26, 2008 7:47 pm
Forum: Wireless Networking
Topic: with money as no object, I need a real MT backhaul solution
Replies: 42
Views: 10917

Re: with money as no object, I need a real MT backhaul solution

Hi chvdr, your are using PC based units to reach this high throuhput so I suppose that you are using indoor units with coax cable (e.g. Andrew). Have you done testing also on enclosure+antenna units? If yes, what hardware did perform better? RB333/433 seems to have crosstalk problems related to thei...
by cpresto
Fri May 16, 2008 10:09 am
Forum: Wireless Networking
Topic: with money as no object, I need a real MT backhaul solution
Replies: 42
Views: 10917

Re: with money as no object, I need a real MT backhaul solution

Hi Kijomabb, the test you described is very interesting. Could you please post more info (e.g. pictures)? I don't like RB333/RB433 layout too, is quite clear that crosstalk is a problem with such layout... It have been much better RB532/RB600 like. Unfortunately I suppose that Mikrotik will mantain ...
by cpresto
Mon May 12, 2008 6:05 pm
Forum: Wireless Networking
Topic: with money as no object, I need a real MT backhaul solution
Replies: 42
Views: 10917

Re: with money as no object, I need a real MT backhaul solution

Could you please post more details chvdr ?
Configuration, schemas, frequency used, distnce covered, throughput (TCP) measured, etc....
Thanks,
Rgds
by cpresto
Fri May 02, 2008 11:16 am
Forum: General
Topic: backup/restore vs import/export
Replies: 2
Views: 1377

Re: backup/restore vs import/export

Thank you Chofex,
this is exactly what I'm doing after my post... :D

Rgds
by cpresto
Mon Apr 28, 2008 1:52 pm
Forum: General
Topic: PPPoE troubleshhoting
Replies: 2
Views: 1165

Re: PPPoE troubleshhoting

Thank you Kamal, if I correctly understood, your idea is that if "one session per host" is enabled and many clients arrives at PPPoE server with the same MAC address (because they are behindand AP), it will allow only one of them to be authenticated. I've checked my settings, "one ses...
by cpresto
Sun Apr 20, 2008 1:12 am
Forum: Wireless Networking
Topic: Nstream Quad ?
Replies: 4
Views: 2317

Re: Nstream Quad ?

Hi Normis,
could you please provide more info on the 300Mbps pt-to-pt link you described? Config files or ppt presentation might help.. :D
Probably using two double polarized antennas per side and RF filters, will allow
reasonable cost, space saving, low crosstalk and stability... 8)

Rgds
by cpresto
Sun Apr 20, 2008 12:44 am
Forum: Wireless Networking
Topic: with money as no object, I need a real MT backhaul solution
Replies: 42
Views: 10917

Re: with money as no object, I need a real MT backhaul solution

To Promind: looking @ your answer, bonding seems to offer better performance than NStreme2, do you suggest to use it instead of NStreme2 ? To Bokili: you have 5 wireless cards on you pt-to-pt device...strange :shock: . Did you use double polarized antennas or two antennas per side? Did you use RF f...
by cpresto
Sat Apr 19, 2008 10:49 pm
Forum: Wireless Networking
Topic: Tuning the 35MB FD nstreme2 RB333 backhaul
Replies: 14
Views: 4078

Re: Tuning the 35MB FD nstreme2 RB333 backhaul

Hi DesertTek, NStreme2 still has too many secrets to me, I'm starting to "play" with it in these days. Errors might be related to crosstalk, despite the fact that Rx/Tx are 400MHz spaced and crosspolarization is used. You can try to use RF narrow bandpass filters centered in interest frequ...
by cpresto
Fri Apr 18, 2008 8:25 pm
Forum: Wireless Networking
Topic: Nstreme2 config & performance
Replies: 1
Views: 2261

Nstreme2 config & performance

Hi all, I have setup the following "lab" on my desk to evaluate and deeper understand Nstreme2: Laptop ---- DeviceA(RB333) ------ DeviceB(RB600) , both devices have their wireless cards simply connected to pigtails that "looks" each other. I've noted what follows: Configuration I...
by cpresto
Fri Apr 18, 2008 5:17 pm
Forum: General
Topic: MT and Virtual Server
Replies: 1
Views: 1091

MT and Virtual Server

Hello, is it possible to use a virtual server (VMware) to install multiple Mikrotik instance on the same hardware? If yes, do I need multiple MT softkware keys? The objective is not to save MT license fee, but to have multiple MT instance on a single machine to be used as testing environment. :D Rgds
by cpresto
Thu Apr 17, 2008 9:27 pm
Forum: General
Topic: Nstreme2 configuration
Replies: 0
Views: 1274

Nstreme2 configuration

Hi all,
I'm trying to configure NStreme2 pt-to-pt link as described on Wiki http://wiki.mikrotik.com/wiki/Nstreme_dual_Step-by-Step but it doesn't work...
Any advice ?!!?

Rgds
by cpresto
Thu Apr 17, 2008 7:07 pm
Forum: General
Topic: ROS 3.xx and RB100 series
Replies: 25
Views: 5170

Re: ROS 3.xx and RB100 series

From what I've seen around the forum....go back to 2.9.51.... :shock:

Rgds
by cpresto
Thu Apr 10, 2008 12:10 am
Forum: General
Topic: broadcast control
Replies: 0
Views: 1038

broadcast control

Hi all,
are there guidelines around on how control and limit broadcast on network? It might be ver dangerous when using pppoe...
rgds
by cpresto
Wed Apr 02, 2008 5:54 pm
Forum: General
Topic: PPPoE troubleshhoting
Replies: 2
Views: 1165

PPPoE troubleshhoting

Hi all, I'm using MT as Access Concentrator with wireless users, whose CPEs authenticates on MT on its PPPoE server. I'm having plenty disconnections from the pppoe server, but the strange thing is that disconnection take place also if I can reach CPEs on their IP address. In my understanding, this ...
by cpresto
Tue Apr 01, 2008 7:13 pm
Forum: RouterBOARD hardware
Topic: RB600 processor
Replies: 8
Views: 2712

Re: RB600 processor

Thank you Alex,
I've done it, but frequency doesn't change...It seems that I have the same problem described in http://forum.mikrotik.com/viewtopic.php ... ncy#p88428 ... :(
by cpresto
Mon Mar 31, 2008 11:15 am
Forum: RouterBOARD hardware
Topic: RB600 processor
Replies: 8
Views: 2712

Re: RB600 processor

thank you Normis, but.... how can I change it? 8)
by cpresto
Fri Mar 28, 2008 7:56 pm
Forum: RouterBOARD hardware
Topic: RB600 processor
Replies: 8
Views: 2712

Re: RB600 processor

Thank you Normis, might this be applied also to RB532/RB532A? I have both of them... If yes, how this can be done? admin@MIKROTIK_CASSISI] /system resource> print uptime: 53m3s version: "3.6" free-memory: 40116kB total-memory: 62588kB cpu: "MIPS 4Kc V0.10" cpu-count: 1 cpu-freque...
by cpresto
Fri Mar 28, 2008 2:22 pm
Forum: RouterBOARD hardware
Topic: RB600 processor
Replies: 8
Views: 2712

RB600 processor

Sorry for the stupid question...
RB600 MPC8343E 266/400MHz network CPU means that its processor may work both at 266 and 400 MHz according to computational needs? :?:

Rgds
by cpresto
Wed Mar 12, 2008 11:22 am
Forum: General
Topic: ROS 3.xx and RB100 series
Replies: 25
Views: 5170

Re: ROS 3.xx and RB100 series

Hello,
as described in my post, RB133c was not connetd only to my PC, so no ping, Dude or whatelse where running...Looking around the forum, this seems to be a known problem.

Rgds
by cpresto
Tue Mar 11, 2008 7:00 pm
Forum: General
Topic: ROS 3.xx and RB100 series
Replies: 25
Views: 5170

Re: ROS 3.xx and RB100 series

Hello, unfortunately I have the same problem, CPEs based on RB133c easly jump to 100% CPU usage. Using the device directly connected to the PC for configuration settings (no snmp, no ping, no traffic on interfaces), it simply crashes when I try to do en export command. E.G. "[CPE_RB133c]>exprt ...
by cpresto
Tue Mar 11, 2008 2:30 pm
Forum: General
Topic: backup/restore vs import/export
Replies: 2
Views: 1377

backup/restore vs import/export

Hi all, I need to make configuration file to be installed into MT based CPEs once these are placed at Customer's premises. Files are different based on frequency, location, device name, etc... What I currently do is to do a backup from a CPE in order to have a "template" configuration that...
by cpresto
Thu Feb 14, 2008 5:59 pm
Forum: General
Topic: Script & CPU Usage
Replies: 0
Views: 896

Script & CPU Usage

Hello, I'm using RB133c in my CPEs with two scripts named blink and beep, to let user led blink and buzzer suonds when CPE is connected to the AP. The problem is that using this two (small) scripts, CPU usage goes to 100% all time long.... This sounds quite strange, due to the small computational re...
by cpresto
Thu Feb 14, 2008 4:49 pm
Forum: General
Topic: Standalone WEB server (very useful)
Replies: 11
Views: 5856

Re: Standalone WEB server (very useful)

We all are awaiting news from you MT team... :D
by cpresto
Mon Feb 11, 2008 9:08 pm
Forum: General
Topic: Standalone WEB server (very useful)
Replies: 11
Views: 5856

Standalone WEB server (very useful)

Hello, currently I'm using MT based CPEs (rb133c+R52), and I'm quite happy with this; we have built audio and led aligment tool taking out buzzer and user led from antenna enclosure. In order to have the " perfect CPE ", 8) only one thing is missing... a standalone web server. In fact, cur...
by cpresto
Mon Feb 04, 2008 5:35 pm
Forum: General
Topic: MT web server
Replies: 6
Views: 1431

Re: MT web server

Nice to read this from you Normis, hope to see (in a near future) changelog that annonces such feature in a further ROS release. I think that many WISPs that are using MT CPEs will really appreciate such capability. Probably (may be I'm wrong :? ) CPE features (LAN IP address, port forwarding, etc.....
by cpresto
Mon Feb 04, 2008 2:15 pm
Forum: General
Topic: MT web server
Replies: 6
Views: 1431

Re: MT web server

That's a bad news.... :cry:
Is web server included in roadmap for further ROS releases?
If not, may it be included in the whislist?
It will be veeeery useful, to build a complete CPE solution.
Rgds
by cpresto
Mon Feb 04, 2008 10:36 am
Forum: RouterBOARD hardware
Topic: RB333 vs RB600
Replies: 3
Views: 1546

Re: RB333 vs RB600

Sure, but from stability point of view?
Any problem experienced with RB333 or RB600?
Probably RB600 is too new to have such a feedback...

Rgds
by cpresto
Mon Feb 04, 2008 10:32 am
Forum: General
Topic: MT web server
Replies: 6
Views: 1431

Re: MT web server

Thank you Chupaka, but this doesn't help me...
What I would like to make is web interface to MT based CPE.
All MT systems can be managed via web by default, I'm trying to understand if is it possible to modify this web interface following my needs.

Rgds
by cpresto
Sun Feb 03, 2008 8:29 pm
Forum: General
Topic: MT web server
Replies: 6
Views: 1431

MT web server

Hi all, I'm thinking tho build a web interface to our MT based CPEs (RB133/c). The idea is to give to our customers (we are a WISP) the possibility to access limited functions on their CPE, e.g. firewall, LAN IP settings, port forwarding, etc... Might this be possible with ROS? Web server in MT docs...
by cpresto
Sun Feb 03, 2008 8:17 pm
Forum: RouterBOARD hardware
Topic: RB333 vs RB600
Replies: 3
Views: 1546

RB333 vs RB600

Hi all,
RB600 cost a little bit more than RB333, due to this small difference which one is the best choice to be used as base for Access Point systems and for high throughput ptp devices with Nstreme?
Currently I'm still using RB532/A, a very stable system...

Rgds
by cpresto
Mon Jan 14, 2008 11:06 pm
Forum: General
Topic: Router OS 3.0 in production environment
Replies: 6
Views: 1414

Re: Router OS 3.0 in production environment

I think I'll move to it in short times, I'm really interested by firewall level7 on p2p identification and shaping. Currently I simply mark known traffic (smtp, http, https, etc...) based on dest port, but custom application are not matched so almost every day customers ask for new ports to be opene...
by cpresto
Mon Jan 14, 2008 10:28 pm
Forum: General
Topic: Router OS 3.0 in production environment
Replies: 6
Views: 1414

Re: Router OS 3.0 in production environment

May I ask you what are, in your opinion, main benefits of ROS 3.x compared to ROS 2.9.x (just a couple of lines)?
by cpresto
Mon Jan 14, 2008 9:54 pm
Forum: General
Topic: Router OS 3.0 in production environment
Replies: 6
Views: 1414

Re: Router OS 3.0 in production environment

So, according to you, ROS 3.0 is out of its beta phase... :D

Rgds
by cpresto
Mon Jan 14, 2008 6:21 pm
Forum: General
Topic: Router OS 3.0 in production environment
Replies: 6
Views: 1414

Router OS 3.0 in production environment

Hi all,
is anybody using ROS 3.0 in production environment?
Is it stable enough?

RGDS
by cpresto
Thu Jan 03, 2008 10:38 pm
Forum: General
Topic: PPPoE auth and routes
Replies: 0
Views: 640

PPPoE auth and routes

Hi all, I've got the following scenario on my net: MT1---PC/CPE1----MT2----CPE2 CPEs (MT based and OSBrdige) have a double IP on their wireless interface, one static (management) and one dynamic assigned to its PPPoE client. MT work as access concentrator and assigns IPs to CPEs only if auth paramet...
by cpresto
Mon Dec 03, 2007 7:40 pm
Forum: RouterBOARD hardware
Topic: Outdoor enclosures for RB333
Replies: 6
Views: 2811

Re: Outdoor enclosures for RB333

Hello, I'm also looking for RB333 outdoor enclosures. Here is what I've found: - already mentioned Titan http://www.titanwirelessonline.com/ProductDetails.asp?ProductCode=EN%2DTW2N , the same used by OSBridge for its 5G device - very similar one from wirelesslan.gr http://www.wirelesslan.gr/product_...
by cpresto
Sun Dec 02, 2007 10:30 pm
Forum: General
Topic: Connection mark in custom chain
Replies: 9
Views: 3255

Re: Connection mark in custom chain

Thank you Thom, your method is very similar to what is described on Wiki http://wiki.mikrotik.com/wiki/Dmitry_on_firewalling , so I suppose that it is widley used (and tested :-). I'll try to apply it on the same router that is using my "known/unknown" method in order to fully compare them...
by cpresto
Fri Nov 30, 2007 9:14 pm
Forum: General
Topic: Connection mark in custom chain
Replies: 9
Views: 3255

Re: Connection mark in custom chain

Thank you galaxynet (Thom), regarding ftp, I'm using it as an "instrument" and I'm not referring to my ftp but to others (e.g. ftp.microsoft.com). When ftp client is configured in passive mode, ftp server listen on default port (21), establishes a random port (> 1024) to exchange data and ...
by cpresto
Fri Nov 30, 2007 10:26 am
Forum: General
Topic: Connection mark in custom chain
Replies: 9
Views: 3255

Re: Connection mark in custom chain

Thank you Chupaka, Ip/Firewall/service-ports seems to be ok: [admin@AdiesselleP2K] ip firewall service-port> print Flags: X - disabled, I - invalid # NAME PORTS 0 ftp 21 1 tftp 69 2 irc 6667 3 X h323 4 quake3 5 X gre 6 X pptp Thank you galaxynet, please find here below all involved chain. [admin@Adi...
by cpresto
Wed Nov 28, 2007 6:01 pm
Forum: General
Topic: Connection mark in custom chain
Replies: 9
Views: 3255

Re: Connection mark in custom chain

Thank you galaxynet for reply. First - double post - I've double posted because I thought the first was not clear enough... also this seems to have the same problem Second - I've done a cut/paste operation because I thought that this compact might be easier to read. I've several ADSL ethernet router...
by cpresto
Wed Nov 28, 2007 1:09 pm
Forum: General
Topic: Connection mark in custom chain
Replies: 9
Views: 3255

Connection mark in custom chain

Hi all, as described in previous post http://forum.mikrotik.com/viewtopic.php?f=2&t=20107, it seems that conneciton-mark doesn't work properly in chains different from MT defined ones. E.g., using a custom chain, called "known", to identify traffic with dest-port<1024, ftp connections ...
by cpresto
Mon Nov 26, 2007 8:26 pm
Forum: General
Topic: About chains
Replies: 0
Views: 1077

About chains

I all, I'm trying to (better) understand chains... I've created a chain called "known" that should collect all known traffic and apply mark routing mangle based on source IP request. The aim is to apply different route to different customers, based on the IP I've assigned them. In prerouti...
by cpresto
Tue Nov 20, 2007 2:19 pm
Forum: General
Topic: IP routes
Replies: 4
Views: 1443

Re: IP routes

Here below the used code # nov/20/2007 13:17:35 by RouterOS 2.9.48 # software id = TH16-XS0 # / ip firewall mangle add chain=forward action=log connection-state=new dst-address=!172.21.254.6 \ protocol=!icmp src-address-list=PPPoE_clienti log-prefix="serro" \ comment="###### log traff...
by cpresto
Mon Nov 19, 2007 5:59 pm
Forum: General
Topic: IP routes
Replies: 4
Views: 1443

Re: IP routes

I've made a Jump in prerouting chain: if dest port is < 1024 flow jumps to "known" chain, otherwise it jumps to "unknown" chain.
by cpresto
Sun Nov 18, 2007 12:18 am
Forum: General
Topic: IP routes
Replies: 4
Views: 1443

IP routes

Hi all, I have a MT configured with two IP address (on two different subnets) on the same interface (172.22.1.254/24 and 172.22.2.254/24), this interface is connected with two different router: ETH4 172.22.1.254 --> 172.22.1.1/24 ETH4 172.22.2.254 --> 172.22.2.1/24 Mangle separates known traffic (de...
by cpresto
Wed Nov 14, 2007 10:04 am
Forum: General
Topic: Return behaviour
Replies: 3
Views: 1181

Re: Return behaviour

Thank you,
so packect flow will go back at the end of chain in any case, wheter or not return is placed.
by cpresto
Tue Nov 13, 2007 8:12 pm
Forum: General
Topic: Return behaviour
Replies: 3
Views: 1181

Return behaviour

Hi all, in firewall/mangle http://www.mikrotik.com/testdocs/ros/2.9/ip/mangle.php, the return action behaves as follows return - pass control back to the chain from where the jump took place does this mean that it has to be used in any case, to pass back control to normal MT chains (prerouting, forw...
by cpresto
Sat Nov 10, 2007 6:48 pm
Forum: General
Topic: Mark-connection vs mark-packet
Replies: 2
Views: 2814

Re: Mark-connection vs mark-packet

Thank you palidin74 for your very detailed comments. About UDP connections, if I correctly understood, "connection" is not referred to its "telecommunication sense" but to internal MT tracking mechanism. About packect/mark connection, according to your commets, may a similar sche...
by cpresto
Sat Nov 10, 2007 1:51 am
Forum: General
Topic: Mark-connection vs mark-packet
Replies: 2
Views: 2814

Mark-connection vs mark-packet

Hi all, several configurations on manual show that mark-connection is applied before than mark-packect, e.g. P2P traffic marking at http://www.mikrotik.com/testdocs/ros/2.9/ip/mangle.php . I've tried to apply mark-packet before mark-connection and it seems to perfom better: faster than the opposite ...
by cpresto
Thu Nov 08, 2007 10:04 pm
Forum: General
Topic: Connections not marked - Protocol 0
Replies: 18
Views: 4090

Re: Connections not marked - Protocol 0

Hope that this problem can be solved, because it is impossible to apply bandiwidth limits to users with connections marked as "none". Look @ pictures for a user with a 1024/128Kbps, he constantly is at almost 2Mbps... :-(
by cpresto
Wed Nov 07, 2007 1:59 am
Forum: General
Topic: Connections not marked - Protocol 0
Replies: 18
Views: 4090

Re: Connections not marked - Protocol 0

I've configured my MT as follows: - the prerouting chain identify all known traffic (tcp/udp with dest port > 1024) and specific applications (MSN, VNC, Remote desktop, ...); - all known traffic is mangled with connection, packet and router mark as "know"; - all remaining traffic is mangle...
by cpresto
Thu Nov 01, 2007 9:04 pm
Forum: General
Topic: PPPoE upload limt
Replies: 6
Views: 2017

Re: PPPoE upload limt

I have to different Internet connection, one for p2p (unknown traffcic with port >1024) and onother one for known traffic (http, ftp, smtp, etc...). The known connection upload was almost full and once I limited customer's upload on its CPE, it immediatly decreased so all this traffic where not mang...
by cpresto
Thu Nov 01, 2007 8:30 pm
Forum: General
Topic: Connections not marked - Protocol 0
Replies: 18
Views: 4090

Re: Connections not marked - Protocol 0

If I correctly understood,
the problem seems to be that there are plenty connections that are not recognized by ROS (those with protocol=0), so these connection cannot be mangled
by cpresto
Thu Nov 01, 2007 8:26 pm
Forum: General
Topic: PPPoE upload limt
Replies: 6
Views: 2017

Re: PPPoE upload limt

mmmm....the whole p2p upload queue is 256Kbps, and I have single customers that are able to do 300Kbps upload :( The only way I've been able to limit such customers was limiting their upload directly on the CPE, but I'm not very happy with this "distributed" policy, because if I'll change ...
by cpresto
Thu Nov 01, 2007 12:44 pm
Forum: General
Topic: Connections not marked - Protocol 0
Replies: 18
Views: 4090

Re: Connections not marked - Protocol 0

Probably the problem I'm experiencing (http://forum.mikrotik.com/viewtopic.php ... p2p#p93278) may be related to these connections not marked...
I'm using ROS 2.9.48
Rgds
by cpresto
Thu Nov 01, 2007 1:52 am
Forum: General
Topic: PPPoE upload limt
Replies: 6
Views: 2017

Re: PPPoE upload limt

I have a simple queue that catches all uknown traffic (p2p) and limit it to download/upload 1Mbps/256Kbps... In my understanding p2p queue is something that should limit (p2p) the total amount of traffic, while PPPoE profile should limit each single connection, that cannot go over these threshold li...
by cpresto
Wed Oct 31, 2007 11:34 pm
Forum: General
Topic: PPPoE upload limt
Replies: 6
Views: 2017

PPPoE upload limt

Hi all, I'm using MT as Access Concentrator to limit Customers' traffic, with PPPoE profiles and defined upload/download limits. Since now this has worked pretty good but suddenly, only on some Customers, upload limit doesn't work any more: Customers that have 128Kbps limit do >256Kbps upload traffi...
by cpresto
Tue Oct 30, 2007 12:07 pm
Forum: General
Topic: Hardware desired features
Replies: 2
Views: 1647

Re: Hardware desired features

I'm using this script for audio aligment with RB133c, and works fine. Of course you have to insert it into scheduler. #Beep related with SNR :global if-snr [ /interface wireless registration-table get [/interface wireless registration-table find] signal-to-noise ] :if (($if-snr > 0) && ($if-...
by cpresto
Mon Oct 29, 2007 8:38 pm
Forum: General
Topic: Hardware desired features
Replies: 2
Views: 1647

Hardware desired features

Two major features will greatly help into CPE, actually based on RB133c: 1) Audio aligment tool. One of the most expensive operation for a WISP is CPE alignement at Customer’s site, especially because this operation is generally done by external installers or by the Customer on his own. This is toda...
by cpresto
Fri Oct 26, 2007 9:52 pm
Forum: General
Topic: PPPoE transparent mode
Replies: 2
Views: 1236

Re: PPPoE transparent mode

Thank you jowi007, I'm trying to do sobut probably I'm doing something wrong: I've enabled bridge filters accepting into input and forward chains arp, pppoe-discovery and pppoe-session protocols, all the rest will be dropped. With such a configuration I'm not able to do PPPoE authentication behind t...
by cpresto
Fri Oct 26, 2007 9:31 pm
Forum: Wireless Networking
Topic: CPE in bridge mode
Replies: 3
Views: 4437

Re: CPE in bridge mode

Thank you slipstream1, WDS works greatly. When in bridge mode, it is quite dangerous to share the same broadcast domain with my customers, so I would like to drop all requests that arrive to CPE (Mikrotik) except from PPPoE (session/discovery). This is done in MT using bridge filters. I'm trying to ...
by cpresto
Fri Oct 26, 2007 10:47 am
Forum: Wireless Networking
Topic: CPE in bridge mode
Replies: 3
Views: 4437

Re: CPE in bridge mode

WDS might be ok, but only if can connect to it both stations in WDS mode and in NAT router mode.
I'll try this
by cpresto
Thu Oct 25, 2007 9:59 pm
Forum: Wireless Networking
Topic: CPE in bridge mode
Replies: 3
Views: 4437

CPE in bridge mode

Hi all, I need to configure a MT based CPE in birdge mode in order to connect to a MT based Access Point. On the Access Point (one eth interface and two wireless interfaces) I've created a bridge, added to it all its interfaces (eth1, wlan1, wlan2) and assigned to this an IP address. If I connect to...
by cpresto
Thu Oct 11, 2007 7:50 pm
Forum: General
Topic: PPPoE transparent mode
Replies: 2
Views: 1236

PPPoE transparent mode

Hi all, it it possible to use MT based wireless CPE in nat/router mode transparent to PPPoE? PPPoE authentication might be closed at CPE or at Customer's devices (PC, Ethernet router, firewall). In first case (auth on CPE) PPPoE client will be added to MT and NAT will be enabled on this "virtua...
by cpresto
Fri Oct 05, 2007 8:42 pm
Forum: General
Topic: WinBox disconnection
Replies: 1
Views: 675

WinBox disconnection

Hi all,
I'm experiencing several disconnection (every 5-10 min) while managing MT remotely via WinBox. :(
TCP port 8291 is opened and disconnections occour also if ping responds and telnet session remains up. Where do I have to look for reason od this behaviour?

Rgds
by cpresto
Sat Sep 29, 2007 11:39 am
Forum: General
Topic: Backup/Restore vs export/import
Replies: 7
Views: 5352

Re: Backup/Restore vs export/import

Thank you jorj, did you create .rsc CPE file from a single export action or did you build it merging several .rsc scripts (firewall, IP, security, etc...)? Regarding keeping update router file configuration on the net, probably it might be solved with script, scheduler and tftp server: script will g...
by cpresto
Sat Sep 29, 2007 2:14 am
Forum: General
Topic: Backup/Restore vs export/import
Replies: 7
Views: 5352

Re: Backup/Restore vs export/import

I would like to use it to backup/restore the whole configuration. I'm using MT as CPE for my Customers (I'm a WISP), so I wolud like to have several configuration files (depending on Cuscotmer's geographic location) that my technician might easily import (or restore) into the CPE. The standard confi...
by cpresto
Sat Sep 29, 2007 1:37 am
Forum: General
Topic: Backup/Restore vs export/import
Replies: 7
Views: 5352

Re: Backup/Restore vs export/import

Have you tried backup/restore, does it work or do you have same problem moving configuration to different devices (same hardware)?
by cpresto
Fri Sep 28, 2007 1:59 am
Forum: General
Topic: Backup/Restore vs export/import
Replies: 7
Views: 5352

Backup/Restore vs export/import

Hi all, I've faced problems doing a backup/restore on routerboard units starting from scratch. E.G., if I do a backup, reset the unit and restore the previously saved config file (.backup file), the configuration is not exactly the same I've saved before. Is there a way to achieve this using export/...
by cpresto
Fri Sep 21, 2007 8:01 pm
Forum: General
Topic: RB532A as router
Replies: 4
Views: 1690

Re: RB532A as router

Ok, my fault...
I've inserted an IP address without mask information: 192.168.1.1 instead of 192.168.1.1/24
I'm sorry... :oops: :oops: :oops:

Rgds
by cpresto
Fri Sep 21, 2007 5:21 pm
Forum: RouterBOARD hardware
Topic: Ubiquity XR5 drivers
Replies: 4
Views: 2356

Re: Ubiquity XR5 drivers

Thank you Gerard,
anyway it is strange that I don't see anything with the command
"[admin@MikroTik] > driver add name ?"

May I ask you to have a look also to this other post http://forum.mikrotik.com/viewtopic.php ... 635&hilit= ?

Rgds
by cpresto
Fri Sep 21, 2007 2:32 pm
Forum: General
Topic: RB532A as router
Replies: 4
Views: 1690

Re: RB532A as router

I thought it was due to the miniPCI used (Ubiquity XR5), so I've change it with an R52, but nothing changed.. :(
by cpresto
Fri Sep 21, 2007 1:59 pm
Forum: RouterBOARD hardware
Topic: Ubiquity XR5 drivers
Replies: 4
Views: 2356

Ubiquity XR5 drivers

Hi all, I have a problem with drivers on RB532A, 500r5 series with RouterOS 2.9.46. I've installed a miniPCI card Ubiquity XR5 http://www.ubnt.com/support_xr5.php4 . Its chipset Atheros AR5414 is supported by MT http://www.mikrotik.com/testdocs/ros/2.9/guide/driverlist.php , but I cannot find it int...
by cpresto
Fri Sep 21, 2007 10:31 am
Forum: General
Topic: RB532A as router
Replies: 4
Views: 1690

Re: RB532A as router

Yes,
but this is not important because my PC and MT eth1 are on the same subnet, e.g.

PC 192.168.1.2/24
MT eth1 192.168.1.1/24
MT wlan1 192.168.2.1/24

if I assign only one IP to MT (eth1 or wlan1) everything is ok, but when I assign the second IP I cannot reach none of them.

Rgds
by cpresto
Thu Sep 20, 2007 10:41 pm
Forum: General
Topic: RB532A as router
Replies: 4
Views: 1690

RB532A as router

Hi all, I've a strange problem with an RB532A with last RouterOS version (2.9.46): if I configure one IP address on its eth1 interface, I can ping and manage it. As soon as I add a new IP (on a different subnet of course) on another interface (e.g. wlan1), I cannot ping its IP on eth1 any more and I...
by cpresto
Tue Sep 18, 2007 9:09 pm
Forum: RouterBOARD hardware
Topic: leds on RB133/c with R52
Replies: 7
Views: 2450

Re: leds on RB133/c with R52

Script #Beep related with SNR :global if-snr [ /interface wireless registration-table get [/interface wireless registration-table find] signal-to-noise ] :if (($if-snr > 0) && ($if-snr <= 15 )) do={:beep length=5s frequency=100} :if (($if-snr > 15) && ($if-snr <= 25 )) do={:beep leng...
by cpresto
Tue Sep 18, 2007 8:18 pm
Forum: RouterBOARD hardware
Topic: leds on RB133/c with R52
Replies: 7
Views: 2450

Re: leds on RB133/c with R52

I'm trying with an RB512A (500r5 series), but no beep is generated by RB, despite the fact that "test-audio" command works. Please find here below details [admin@MikroTik] interface wireless> info print 0 interface-type=Atheros AR5413 chip-info="mac:0xa/0x5, phy:0x61, a5:0x63, a2:0x0,...
by cpresto
Tue Sep 18, 2007 4:50 pm
Forum: RouterBOARD hardware
Topic: leds on RB133/c with R52
Replies: 7
Views: 2450

Re: leds on RB133/c with R52

Thank you Sergejs,
is "alignment-only" supported for all HW on only for RB512?

Rgds
by cpresto
Tue Sep 18, 2007 10:31 am
Forum: RouterBOARD hardware
Topic: leds on RB133/c with R52
Replies: 7
Views: 2450

Re: leds on RB133/c with R52

Probably this http://wiki.mikrotik.com/wiki/LED_Antenna_Alignment might be applied, changing "blink" with ":beep".
by cpresto
Mon Sep 17, 2007 10:00 pm
Forum: RouterBOARD hardware
Topic: leds on RB133/c with R52
Replies: 7
Views: 2450

Re: leds on RB133/c with R52

Yes, SNMP is useful once CPE is installed at Customer's premises, but I'm looking for something to help antenna orientation during installation phase, that can be used by customer itself or an external installators. Beep might be useful, a script need to be written in order to related RSSI (or SNR) ...
by cpresto
Sat Sep 15, 2007 1:49 pm
Forum: RouterBOARD hardware
Topic: leds on RB133/c with R52
Replies: 7
Views: 2450

leds on RB133/c with R52

Hi all, I'm interesting into building a CPE with rb133/c and R52. Is there a way to connect external leds that inform about signal received? E.G. 3 leds that: - remain witched off if CPE is not connected to its AP - led n°1 switch on if signal > -80 - led n°2 switch on if signal > -70 - led n°3 swit...
by cpresto
Sat Sep 15, 2007 10:43 am
Forum: General
Topic: P2P to Default Gateway
Replies: 13
Views: 2958

Re: P2P to Default Gateway

I'm glad it helps...
Rgds,
Carlo
by cpresto
Tue Sep 04, 2007 2:11 pm
Forum: General
Topic: P2P to Default Gateway
Replies: 13
Views: 2958

Re: P2P to Default Gateway

Did you use a connection mark in your Unknown traffic mark routing rule? ### Unknown Traffic chain=prerouting action=mark-routing new-routing-mark=unknown passthrough=no connection-mark=!known src-address-list=PPPoE_users If your PPPoE address are 10.10.0.0/16 10.11.0.0/16 10.12.0.0/16 10.14.0.0/16 ...
by cpresto
Tue Sep 04, 2007 12:06 pm
Forum: General
Topic: P2P to Default Gateway
Replies: 13
Views: 2958

Re: P2P to Default Gateway

I'm using it in last four days, and it seems ok... :)
Now my DG does not receive P2P any more

Rgds
by cpresto
Sat Sep 01, 2007 8:33 pm
Forum: General
Topic: P2P to Default Gateway
Replies: 13
Views: 2958

Re: P2P to Default Gateway

HI jdejansb, it seems that I've solve the problem, may be this might be useful to others... 8) I've simply applied a mark routing (unknown) to all unknown traffic, as described in my post. The mikstake was that mark routing needs IP address to work, so I've done an address list (PPPoE users) where a...
by cpresto
Wed Aug 29, 2007 8:01 pm
Forum: General
Topic: Port(s) of P2P
Replies: 6
Views: 1937

Re: Port(s) of P2P

Apply mangle to all known traffic is what I'm currently doing and it works quite good, but avery day ports need to be opened to allow newer applications (vpns, custom applications, voip, ...). Actually I do mangle as follows: ## known traffic-->mark connection(known)-->mark packet(known)-->mark rout...
by cpresto
Wed Aug 29, 2007 7:49 pm
Forum: General
Topic: P2P to Default Gateway
Replies: 13
Views: 2958

Re: P2P to Default Gateway

Yes, but there are many other ports needed (msn video, custom VPN, ....). Actually the system is working pretty good: all P2P is routed to default gateway where it is queued and all other traffic (known) is directed to other connections. The only problem I have is that I'm not able to apply a mark r...
by cpresto
Wed Aug 29, 2007 2:22 pm
Forum: General
Topic: P2P to Default Gateway
Replies: 13
Views: 2958

P2P to Default Gateway

Hi all, currently I'm identifying P2P by means of mangle on all other type of traffic (ports < 1024), that is mangle as "known". All other type of traffic is mangled unknown (with both connection and packet mark) and routed on default gateway. I would like to add also a "unknown"...
by cpresto
Wed Aug 29, 2007 1:55 pm
Forum: Wireless Networking
Topic: Three MT in bridge
Replies: 2
Views: 942

Re: Three MT in bridge

Thank you Dallas,
the problem was a switch (Zyxel) that connects MT2 and MT3: I've simple rebooted it and everything went ok... :?
CPEs are configured as normal AP client in NAT router mode.

Rgds
by cpresto
Wed Aug 29, 2007 10:02 am
Forum: General
Topic: Impossible to drop ARES p2p
Replies: 14
Views: 3504

Re: Impossible to drop ARES p2p

Hi Jose, could you please post what type of level7 firewall do you use to filter p2p traffic? MT cannot efficently mangle all p2p traffic (please look @ http://forum.mikrotik.com/viewtopic.php?f=2&t=18024 ), so the procedure normally used is to mangle all other traffic (e.g. calling it "kno...
by cpresto
Mon Aug 27, 2007 8:18 pm
Forum: Wireless Networking
Topic: Three MT in bridge
Replies: 2
Views: 942

Three MT in bridge

Hi all, I have a problem with this configuration MT1 >>>>> MT2 ----- MT3 >>>>> CPE where >>>> is a wireless link and ------ is a cable link. MT1, MT2 and MT3 have two wireless cards and one eth interface each. MT1 and MT2 are in bridge on their wlan1 interfaces, following what explained here [url]ht...
by cpresto
Mon Aug 20, 2007 9:24 pm
Forum: General
Topic: Fight against rapidshare
Replies: 84
Views: 34553

Re: Fight against P2P on port 80

If I use
>=0, scripts stops if an already addeded IP address is found into address list,
With !=0 it seems ok...
by cpresto
Mon Aug 20, 2007 11:30 am
Forum: General
Topic: Fight against rapidshare
Replies: 84
Views: 34553

Re: Fight against P2P on port 80

Yes, it should be something similar, new part in red. It doesn't work, I'm not good enough with scripts :? ...anyone may have a look and correct it? :foreach i in=[/ip dns cache find] do={ :if ([:find [/ip dns cache get $i name] "rapidshare"] != 0) do={ :log info ("rapidshare: " ...
by cpresto
Fri Aug 17, 2007 1:35 pm
Forum: General
Topic: Fight against rapidshare
Replies: 84
Views: 34553

Re: Fight against P2P on port 80

Almost done Christian... it stops when an already inserted entry is found into DNS cache address list, please have a look here below: [admin@AdiesselleP2K] > ip dns cache print Flags: S - static # NAME ADDRESS TTL ......... 55 ns1.rapidshare.com 195.122.131.250 1d19h59m 56 ns2.rapidshare.com 80.237....
by cpresto
Thu Aug 16, 2007 8:14 pm
Forum: General
Topic: Fight against rapidshare
Replies: 84
Views: 34553

Re: Fight against P2P on port 80

Hi cmit, script works almost fine: IPs whose name is "xxx.rapidshare.com" are added to the list, while IPs that correspond to "rapidshare.com" are not inserted into the list. Please have a look at addresses here below. Probably something have to be changed into script search crit...
by cpresto
Thu Aug 16, 2007 4:35 pm
Forum: General
Topic: Fight against rapidshare
Replies: 84
Views: 34553

Re: Fight against P2P on port 80

Great cmit,
I'll try and let you know

Thank you,
Carlo
by cpresto
Thu Aug 16, 2007 1:23 pm
Forum: General
Topic: Fight against rapidshare
Replies: 84
Views: 34553

Re: Fight against P2P on port 80

Thank you sergejs, yes, it is not P2P, but I "shape" this traffic as it is, in order to limit its download. This is because I already have a queue for P2P traffic but, once identified, another queue might be created and used specifically for Rapidshare. The problem remains, on how to do th...
by cpresto
Thu Aug 16, 2007 11:09 am
Forum: General
Topic: Fight against rapidshare
Replies: 84
Views: 34553

Re: Fight against P2P on port 80

Thank you Sergej/Janisk, but what you suggest is what I've written at the beginning of this post (if I correctly understood): I'm using MT DNS cache to identify Rapidshare IP addresses and put them into a dedicated access list, let's call it Rapid_list. Http traffic to/from Rapid_list will be consid...
by cpresto
Tue Aug 14, 2007 6:29 pm
Forum: General
Topic: Fight against rapidshare
Replies: 84
Views: 34553

Re: Fight against P2P on port 80

Thank janisk,
but, as you can read in my posts... this is exactly what I'm doing :D
The objective is to let MT do this automatically...
by cpresto
Tue Aug 14, 2007 11:58 am
Forum: General
Topic: Fight against rapidshare
Replies: 84
Views: 34553

Re: Fight against P2P on port 80

Yes, you can download files one by one from Rapidshare but, due to their nature (software, porno video,...) customers spend ours a day downloading files. Burst limitations might be a solution, but IP server identification is necessary as well, otherwise this will be applied also for other web downlo...
by cpresto
Tue Aug 14, 2007 11:27 am
Forum: General
Topic: Fight against rapidshare
Replies: 84
Views: 34553

Re: Fight against P2P on port 80

Probably I've not been clear enough... :? From my post it should be clear that I perfectly understood that Rapidshare is normal http traffic, and this is exactly the problem !!! :( I do refer to Rapidshare as P2P because it is used like this: with P2P you leave your PC on and download files 24h a da...
by cpresto
Mon Aug 13, 2007 9:49 pm
Forum: General
Topic: Fight against rapidshare
Replies: 84
Views: 34553

Re: Fight against P2P on port 80

Please note that Rapidshare traffic is normal http traffic on port 80, the same "normal browsing" traffic.
The only difference is that on RapidShare servers are stored files to be shared.
Definetly, it is not P2P traffic but simply "P2P content".
by cpresto
Mon Aug 13, 2007 6:02 pm
Forum: General
Topic: MT bridge capabilities
Replies: 4
Views: 1352

Re: MT bridge capabilities

IP address a.b.c.3 is not assigned to lacal MT interface, as you can see from picture, but directly to Costumer's PC, and int is in the same subnet of a.b.c.1 (ISP public IP address) and a.b.c.2 (MT IP WAN address).
by cpresto
Mon Aug 13, 2007 5:57 pm
Forum: General
Topic: Fight against rapidshare
Replies: 84
Views: 34553

Re: Fight against P2P on port 80

Hi tgrand,
this is already done (port < 1024) as described in my post.
The problem is that P2P on port 80 (file sharing hosting as Rapidshare) is identified (based on its port traffic) as normal http traffic instead of P2P...
by cpresto
Fri Aug 10, 2007 4:50 pm
Forum: General
Topic: Fight against rapidshare
Replies: 84
Views: 34553

Re: Fight against P2P on port 80

Yes sergejs, this might be a solution, but to mangle a connection and establish limits for this (if port 80 is used), I do have to know its IP address to differentiate it from all the others, so DNS it's back again... :? I don't want to limit users that download software from web site (antivirus tri...
by cpresto
Fri Aug 10, 2007 11:15 am
Forum: General
Topic: Fight against rapidshare
Replies: 84
Views: 34553

Re: Fight against P2P on port 80

Thank you Sam, please find here below cache content: Flags: S - static # NAME ADDRESS TTL 0 za.akadns.org 195.219.3.169 11h13m58s 1 zb.akadns.org 206.132.100.105 11h13m58s 2 zc.akadns.org 61.200.81.111 11h13m58s ...... ...... 56 http://www.rapidshare.com 195.122.131.250 14m22s 57 images.rapidshare.c...
by cpresto
Thu Aug 09, 2007 11:22 pm
Forum: General
Topic: Fight against rapidshare
Replies: 84
Views: 34553

Fight against rapidshare

Hi all, as a WISP, we are fightng our battle against P2P every day... :? P2P is identified with mangle for port different than well known ports (>1024) and redirected through dedicated connection (MT default gateway). A big problem is represented by P2P on port 80, like Rapidshare. This traffic is n...
by cpresto
Tue Aug 07, 2007 8:48 pm
Forum: General
Topic: MT bridge capabilities
Replies: 4
Views: 1352

MT bridge capabilities

Please look @ picture here below, used to detailed my post

Rgds
by cpresto
Wed Aug 01, 2007 10:52 am
Forum: Wireless Networking
Topic: Antenna-mode=a or b ?!?!
Replies: 4
Views: 10375

Re: Antenna-mode=a or b ?!?!

Thank you cmacneill for reply, I'm sorry but my description wasn't clear enough: the device I'm using has two wireless cards (miniPCI Winstron). In the light of your consideration, I suppose that antenna-mode=a means the card main connector and antenna-mode=b means the card aux connector. So for bot...
by cpresto
Tue Jul 31, 2007 6:43 pm
Forum: Wireless Networking
Topic: Antenna-mode=a or b ?!?!
Replies: 4
Views: 10375

Antenna-mode=a or b ?!?!

Hi all, I'm a bit confused about antenna-mode settings in MT... I'm using MT devices WRAP based with a double wireless interface (N connectors); in my understanding antenna-mode=a or antenna-mode=b means connector a or connector b. Based on this, I've connected one sectorial antenna to connector a a...
by cpresto
Tue Jul 31, 2007 2:42 pm
Forum: Wireless Networking
Topic: DFS: frequency used
Replies: 2
Views: 945

Re: DFS: frequency used

Ok great,
thank you for reply Uldis.
I thought it was only a selection menu and that it is not possible to write down a frequency range.
Now it works and scan only selected range.

Rgds
by cpresto
Mon Jul 30, 2007 7:52 pm
Forum: Wireless Networking
Topic: DFS: frequency used
Replies: 2
Views: 945

DFS: frequency used

Hi all, I've observed that when using DFS ( 5GHz, no radar detection, domain Italy), MT starts scan at frequenquencies not allowed by the regulatory domain in outdoor usage (5180, 5200 MHz) and stops scanning without searching at higher frequencies. Is there a way to exclude some channels for the sc...
by cpresto
Mon Jul 30, 2007 7:42 pm
Forum: General
Topic: PPPoE over wireless
Replies: 3
Views: 1174

Re: PPPoE over wireless

Thank you sergejs,
setting "change-tcp-mss=yes" solved the problem.
It is strange, because with "change-tcp-mss=no" it worked fine for weeks and, suddenly, it crashed... is there a reason for this?

rgds
by cpresto
Wed Jul 25, 2007 10:14 am
Forum: General
Topic: PPPoE over wireless
Replies: 3
Views: 1174

PPPoE over wireless

Hi all, are ther docs around give guidlines for PPPoE over wireless? This is reserving me unwanted surprises... I'm using MT as Access Concentrator and OSBridge as CPE with embedded PPPoE client. Everithing works fine but suddenly some web sites didn't work any more for some customers. The strange t...
by cpresto
Thu Jul 19, 2007 2:47 pm
Forum: General
Topic: MT documentation
Replies: 6
Views: 1031

Re: MT documentation

Thank you janisk/Normis, yes you where clear enough... I think that documents like this http://mum.mikrotik.com/presentations/2007_1/PL07_Citraweb.pdf might help into MT understanding. Unfortunately such a detailed documentation is not available on online manual, but users (like me) need to search i...
by cpresto
Wed Jul 18, 2007 6:10 pm
Forum: General
Topic: MT documentation
Replies: 6
Views: 1031

Re: MT documentation

In my opinion (may be I'm wrong), following sections need to be enhanced: -Packet Flow -chains mechanism (input, output, forward, prerouting, postrouting) is not clear enough. It is difficult to understand the chain type that best fits several situations. Application examples may help -Mangle -mark-...
by cpresto
Wed Jul 18, 2007 10:32 am
Forum: General
Topic: MT documentation
Replies: 6
Views: 1031

MT documentation

Hi all,
are there alternative documentation available on MT?
Personally I found online manual and wiki not enough clear and detailed, especially on routing (http://www.mikrotik.com/testdocs/ros/2.9/ip/flow.php) and Mangle ( http://www.mikrotik.com/testdocs/ros/2.9/ip/mangle.php)

Best regards
by cpresto
Wed Jun 13, 2007 8:53 pm
Forum: General
Topic: ISDN miniPCI support
Replies: 3
Views: 965

Re: ISDN miniPCI support

Thank you gmsmstr, of course ISDN is not a technology "future proof", but as backup is has a reason to "survive". Could you please address me to some commercial product that can solve the problem? I think that Cisco 1840 series should solve it, with an eth and an ISDN WIC, but cu...
by cpresto
Sat Jun 09, 2007 9:41 am
Forum: General
Topic: ISDN miniPCI support
Replies: 3
Views: 965

ISDN miniPCI support

Hi all, as a WISP, I've several customers that ask me for ISDN backup to wireless connection. To achieve this an ethernet router with and ISDN interface is needed in addiction to the normal wireless CPE. The router simply check if the wireless connection is ok (watchdog on PPPoE access concentrator)...
by cpresto
Sat Jun 09, 2007 9:29 am
Forum: Wireless Networking
Topic: AP and Station
Replies: 7
Views: 1981

Re: AP and Station

I've followed what described in Wiki (http://wiki.mikrotik.com/wiki/Transpare ... o_Networks) and everithing works fine... :D
by cpresto
Sat Jun 09, 2007 8:59 am
Forum: Wireless Networking
Topic: Proper grounding
Replies: 1
Views: 997

Proper grounding

Hi all, is there a schema that explain how to correct ground an external units routerboard based, antennas and all other equipments? E.G. Should routerboard, enclosure, mast, antennas, ftp cable shield and lighting protectors (http://www.hyperlinktech.com/web/coaxial_lightning_protectors.php) be con...
by cpresto
Tue Jun 05, 2007 4:04 pm
Forum: Wireless Networking
Topic: AP and Station
Replies: 7
Views: 1981

Re: AP and Station

What I would like to do is to have the two units bridged together. jist like if they where simple AP and client. MK acts normally as router, with different IPs (on different subnets) on its interfaces, so in case of an RB532 with two wlan cards I have to create a bridge (e.g. "bridge1") an...
by cpresto
Tue Jun 05, 2007 2:31 pm
Forum: Wireless Networking
Topic: AP and Station
Replies: 7
Views: 1981

AP and Station

Hi all, I'm trying to configure two MK with double wireless card to work as AP and Station. MK1 is configured as AP bridge , MK2 is configured as Station and they connect each other because is can see MK2 connecting to MK1 with a cable via WinBox. To do this I need to configure MK1 interfaces (eth1 ...
by cpresto
Tue Jun 05, 2007 1:41 pm
Forum: General
Topic: ISDN PCI support
Replies: 1
Views: 920

ISDN PCI support

Hi all,
did anyone tried to use ISDN PCI card widely available on the market (Linksys, DLink, etc...) with Mikrotik?
I need to build up an ISDN backup to the wireless connection for a customer: if wireless link goes down, ISDN dial-up starts. Solutions can be Ci$co or MK...
by cpresto
Mon Apr 30, 2007 2:04 pm
Forum: General
Topic: Win shared directories
Replies: 9
Views: 2347

Win shared directories

Thank you for reply chvdr, do you mean several ways to bridge the two interfaces? I would like to use Win shared directories in order to test link capacity through MK router without MK link test tool, but simply transferring a file between two PCs. Obviuosly I can ping one another the two PCs on two...
by cpresto
Sat Apr 28, 2007 1:31 pm
Forum: General
Topic: Win shared directories
Replies: 9
Views: 2347

Win shared directories

If I bridge interfaces,
all broadcast traffic will pass trhough them. I would like to avoid this...
by cpresto
Tue Apr 17, 2007 1:30 pm
Forum: General
Topic: Win shared directories
Replies: 9
Views: 2347

Win shared directories

Hi all,
I would like to search for shared directories on windows machines connected to different MK interfaces. E.g. PC1_192.168.1.1/24, PC2_192.168.2.1/24 respectively connected to MK Eth1 and Eth2 interfaces. Is there a way to allow PC1 find PC2 if I do a search for 192.168.2.1 from PC1?

Rgds
by cpresto
Tue Jan 16, 2007 1:47 pm
Forum: General
Topic: PPPoe Over Wireless
Replies: 7
Views: 2336

Hi Freman, is 1460 a value obtained considering project parameters? I'm looking for a guideline in order to understand how better configure MTU parameters. Is it influenced by the number of wireless links between PPPoE concentrator and CPE? :? I'm using MK as PPPoE concentrator and OSBridge 5Xli (ht...
by cpresto
Tue Jan 16, 2007 1:38 pm
Forum: General
Topic: Wireless PPPoE and MTU
Replies: 2
Views: 1531

Wireless PPPoE and MTU

Hi all, I'm looking for guidelines about MTU to be chosen for wireless PPPoEconnections. Actually I've configured it @ 1480. I would like to know if it might be optimized, considering several factors (rtt, latency, etc..). My has MK as PPPoE concentrator and OSBridge as CPE at customer's site. What ...
by cpresto
Fri Jan 12, 2007 7:07 pm
Forum: General
Topic: public IP assignment
Replies: 8
Views: 2535

public IP assignment

Thank you all for replies, finally it seems that the problem is the Lancom Router. It's able to manage two Interfaces, DMZ and Intranet, only DMZ address are able to access Internet withouth NAT. I've tested the following scenarios: 1) Unique subnet Internet----Lancom-------------------------MK-----...
by cpresto
Sat Jan 06, 2007 12:35 pm
Forum: General
Topic: public IP assignment
Replies: 8
Views: 2535

public IP assignment

Thank you all, yes obviously 32 IP is /27...my fault. Of course it is possible to make 2 subnets with a /27 one, but this cause IP waisting that I would like to avoid. I suppose that if I give a secondary (private) IP address at ISP router on LAN side (the one that looks @ MK), all public IPs should...
by cpresto
Fri Jan 05, 2007 8:15 pm
Forum: General
Topic: public IP assignment
Replies: 8
Views: 2535

public IP assignment

Hi all, I have to assign to customers public IPs form my ISP (32public IPs, /29 subnet). In a x.x.x.x/29 subnet only 30 IPs are available: x.x.x.128 is the network and x.x.x.159 is the broadcast. My customenrs stays behind MK. ISP router as a public IP (x.x.x.129) and MK have another public IP (x.x....
by cpresto
Tue Sep 05, 2006 4:37 pm
Forum: General
Topic: how to mangle only for p2p
Replies: 9
Views: 3727

The problem is: how to mangle all other unknown protocols (e.g. client/server custom applications) and redirect them to another gateway?
:?:
by cpresto
Mon Aug 28, 2006 8:37 pm
Forum: General
Topic: ADSL router as bridge + MK
Replies: 6
Views: 2506

ADSL router as bridge + MK

Thank you jarosoup for reply, I've corrected the subnet. My ISP assigned me: IP address 81.73.132.120 Subnet mask 255.255.255.0 DG 81.73.132.254 I can assign these to an ADSL router (DLink 504T) on the WAN interface, and everithing is ok. What I'm trying to do is to assign this address to MK (behind...
by cpresto
Mon Aug 28, 2006 5:26 pm
Forum: General
Topic: ADSL router as bridge + MK
Replies: 6
Views: 2506

ADSL router as bridge + MK

Quite long.... 8) [admin@Adiesselle] > interface ethernet export # aug/28/2006 16:21:59 by RouterOS 2.9.29 # software id = LS1J-A5N # / interface ethernet set ether1 name="ether1" mtu=1500 mac-address=00:0E:A6:0A:F9:F3 arp=enabled \ disable-running-check=yes auto-negotiation=yes full-duple...
by cpresto
Mon Aug 28, 2006 11:24 am
Forum: General
Topic: ADSL router as bridge + MK
Replies: 6
Views: 2506

ADSL router as bridge + MK

Some routers (e.g. Cisco 1721) allow to assign more than one IP address on their interface, these are called "secondary IP address". This is useful in order to save public IP address to connect two (or more) routers. In my understanding MK should be able to manage such a configuration, so ...
by cpresto
Sat Aug 26, 2006 11:27 am
Forum: General
Topic: ADSL router as bridge + MK
Replies: 6
Views: 2506

ADSL router as bridge + MK

Hi all, I've got an ADSL connection with a public IP address, that I'm trying to assign directly to one MK interface. I've configured the ADSL as bridge, and assigned the public IP to on MK interface, network is as follows ADSL rotuer (as bridge) <-----> MK I've assigned the public IP address to the...
by cpresto
Wed Aug 23, 2006 6:46 pm
Forum: General
Topic: 1:N destination NAT
Replies: 3
Views: 2534

1:N destination NAT

Thank you Eugene, I'm currently using dst-nat, but in my understanding redirect should work for all client behind the router (the same way masquerading does but in opposite direction), otherwise what is redict meaning? :shock: I understood that redict means: all traffic for selected ports to all hos...
by cpresto
Mon Aug 14, 2006 5:34 pm
Forum: General
Topic: 1:N destination NAT
Replies: 3
Views: 2534

1:N destination NAT

Hi all, I'm trying to do a 1:N destination NAT. What I would like to do is a destination NAT to all p2p users (emule) without do a single 1:1 NAT for every single user. Reading at MT manual http://www.mikrotik.com/docs/ros/2.9/ip/nat it seems that this could be done with redirect (opposite of masuer...
by cpresto
Thu Jul 27, 2006 4:24 pm
Forum: General
Topic: PPPoE guidline
Replies: 7
Views: 2471

PPPoE guidelines

Thank you HarvSki, please find here below ping results Starting from MK 100 packets transmitted, 96 packets received, 4% packet loss round-trip min/avg/max = 32/69.4/799 ms Starting from my laptop (behind MK) 100 packets transmitted, 100 packets received, 0% packet loss round-trip min/avg/max = 33/5...
by cpresto
Thu Jul 27, 2006 12:39 pm
Forum: General
Topic: PPPoE guidline
Replies: 7
Views: 2471

PPPoE guidlines

Thank you Sten/HarvSki,
the network from "radio point of view" seems to be fine.
The problem is that I have some customers that contienes to log on/off my PPPoE concentrator (MK), while I'm stiil able to ping their CPE. :(
MTU is configured at 1452, I'm going crazy.....
by cpresto
Thu Jul 27, 2006 11:14 am
Forum: General
Topic: PPPoE guidline
Replies: 7
Views: 2471

PPPoE guidline

Any advice? :(
Thank you
by cpresto
Wed Jul 19, 2006 1:07 pm
Forum: General
Topic: PPPoE guidline
Replies: 7
Views: 2471

PPPoE guidline

Hi all, I have some problems with PPPoE. Suddenly customers began to disconnect form PPPoE server (MK). All customerns are connected with wireless CPE (OSBridge, linksys with DD-WRT) that includes PPPoE or with PPPoE client (RASPPPoE) on the PC. Is there a guidline to be followed when PPPoE is used ...