MikroTik

billjellis

Any updates on this issue. just bricked 3 sxtsq 5ac I have a support ticket in..

Bill

billjellis

Hi All,

Has anyone found a good replacement for the wsap?

Bill

billjellis

Yes that was it.
Thank You
Bill

billjellis

Hi All, I did not know where to put this. I have started to have this issue on my main PC winbox "Could not save configurations" I pretty sure its a rights issue. I created a local c:\winbox folder and ran it from there and still the same thing. It was on a network share. I import an addre...

billjellis

Hi All, have this crs112 that is hitting 100% What is in unclassified?

crs112 sw214 100%.jpg

billjellis

Hi All, Weird (Node5) i have this setup and it all works except for the end no ip traffic and it does not even pass Romon from any equipment @ Node 5. I can Romon to the equipement from the headend. On the equipment I can only see neighbours on the switch. Wirewirecube(pair) to Hex POE to 1 mANT 5 a...

billjellis

Hi All, I have a site with 2 dslam and 30 hapac-lites in the rooms. I am getting a lot of the the following: Apr/05/2022 15:23:50 bridge,stp VVI-78A90899xxxx-2 forwarding Apr/05/2022 15:24:03 bridge,stp VVI-78A908FBxxxx-1 learning Apr/05/2022 15:24:03 bridge,stp VVI-78A908FBxxxx-1 forwarding Apr/05/...

billjellis

Hi All, I have had this router do these reboots for 2 days it seems to be semi-random Screenshot 2022-02-10 085934.jpg [/url] Power seems good other devices on the power bar is good ( i will get them to change this. ) It was connecting to a POE switch that was set to auto - Turned off Is it hardware?

billjellis

I have a CRS328-24P-4S+ it was working, but now it is only powering equipment but does not give any access to the network. neighbors shows all the devices on the wlan interface but nothing else.. power cycled the equipment, I am going to replace it. What would cause the network to not work but still...

billjellis

I am trying to print out just the host names in DHCP-Server leases but cannot get this to work...
What am i not doing corectly?

/ip dhcp-server lease print where host-name="WLR*"

Thanks
Bill

billjellis

I have issues with Capsman and "possible regulatory info mismatched with CAP" when I upgrade to 6.47.9 they were all set to auto. I have now started to set them manually. 5785/20-eCee/ac(30dBm) is what one is auto set to. Even thou it say "possible regulatory info mismatched with CAP&...

billjellis

Hi All,

The blue highlighted AP for some reason just stop the caps. I have to go in a provision them again.

Apdown.PNG

billjellis

+1 much needed

billjellis

Hello, I am getting errors on this link a Rocket 5ACPrism I have tried: Different Cable Different Port (on the CRS) Different Prism I am getting an Occasional TX Drop on the POE interface. It does not correspond to the ping losses. Loose ping to the both Prisms sent=693 received=612 packet-loss=11% ...

billjellis

Hi All, tool speed-test 23.162.144.120 user=btest password=btest status: udp upload time-remaining: 3s ping-min-avg-max: 22.5ms / 29.4ms / 40.7ms jitter-min-avg-max: 30us / 3.01ms / 13.3ms loss: 0% (0/200) tcp-download: 672Mbps local-cpu-load:22% tcp-upload: 20.9Mbps local-cpu-load:1% remote-cpu-loa...

billjellis

Hi All,

CRS112-8p

I am getting TX drops on a VLAN3 are these something to worry about?
interface vlan3-eth1 .... Tx Drops 338
The switch's up time has been 27 days...

It is not going up

I am trying to figure out why I am having issues with CAPsMAN Dropping during the peek times..

billjellis

Same here...

Bill

billjellis

You may have to upgrade Winbox to v3.19 I have the same thing happening.... Hi Everyone, Home - RB2011Ui - RouterOS 6.45.2 - WinBox 3.18 - IP 192.168.88.1 Work - CCR1016-12G - RouterOS 6.45.2 WinBox 3.18 - IP 192.168.0.1 I have managed to lock myself out of 2 routers. Both are fully functional. IP a...

billjellis

Hello,
Here is what i have: You probably need the "path" around the file path and/or read/write permission.

"C:\Program Files (x86)\Dude\winbox.exe" "[Device.FirstAddress]" "[Device.UserName]" "[Device.Password]"

Bill

billjellis

Site setup RB3011, 12 AP - 10mANT, 1 Omnitik, and 1 Rb-groove on wired and wireless network. 60 - 70 hap AC lite connect to mANTs on the 5ghz wireless up-link CAPsMAN drops all mANTs they all quickly reconnect. Even the mANTS that are directly connect to a tough-switch that is directly attached to t...

billjellis

Hello,

Has any one used one of these before. They would plug into the the HAP AC SFP port and give 100mb DSL solution for my customers older hotels.
https://www.versatek.com/product/vx-160 ... lco-grade/

Bill

billjellis

Hi All,

I have a Dude server that is sitting at 8 GB running. What is the best way to purge old data?

Bill

billjellis

Cannot get dude to startup - Issues with the dude are becoming to regular

status: enabling back after import: open db: not an error

Bill

billjellis

Hello, With the hot-spot enabled these device cannot ping 10.0.0.1 (default gateway ip / hotspot server) or anything passed the hotspot router to the internet. The devices can however ping other devices on the network. Devices that are in the bypass list with a *static DHCP* have the same issue. I c...

billjellis

Here is what i use for the System Identity.

[ros_command(":put [/system identity get name]")][Device.FirstAddress] [Device.RosVersion]

Thanks for the SNMP

Bill

billjellis

Running 6.42.7 and this started (Oct 14 2018) dude,critical db failure: database disk image is malformed.

It is one hosted on a 750G r3 Hex with a 30gb sd

Going to move to a VM

Thanks for suggestions.
Bill

billjellis

Hi All, I am having similar issues. When this happened today all the UNIFI AP go nuts and seem to try to do wireless up-link roaming to re-establish internet then i get routing loops all over. AGGG. Turning off "Allow meshing to another access point" I vote for an integrated 60g / with a 5...

billjellis

Hello, I have a rb1009 directly connected to a ubnt Litebeam ACgen2 connected to an other Litebeam ACgen2. Neighbors can see some of the hAP and Mikrotik POE switches. When i ROMON it to the rb1009 nothing shows up. RB1009 > LBE‑5AC‑Gen2 <> LBE‑5AC‑Gen2 > CRS122 POE This network has a total of 4 Lit...

billjellis

I would like to use this product https://na.baicells.com/nova-2x250mw/ it support LTE Band 42/43. "Anyone knows about a minipci LTE modem or USB modem that could work with a Routerboard?"

Bill

billjellis

Problems solved a faulty POE injector to a UAP AC pro.

billjellis

Hello, I want to output these these items: :put [/interface ethernet get [/interface ethernet find default-name=ether1] mac-address ] :put [/interface wireless get [/interface wireless find default-name=wlan1] mac-address ] :put [/interface wireless get [/interface wireless find default-name=wlan2] ...

billjellis

Thanks for this works great,

Bill

billjellis

I second this. I have hotels that have hAP AClite connected to a 921GS-5HPacD r2 on the 5ghz. Capsman is unreliable in this scenario. 5ghz ->as a backhaul to the 5ghz hAP Capsman on the 2.4

Bill

billjellis

What port is the WAN connected to? The problem occurs when there is a mix of 10/100 and 10/100/1000 on the same switch chip. The switch has to clear it's buffers to accommodate for either a 100Mb or 1Gb link. Maybe bad cable causing mis-negotiation? Hi Steve, The current setup is all devices have G...

billjellis

Hello, Thanks @honzam All 100mb ports are now on a crs125 and it is still happening... :( mar/03 13:43:01 interface,info ether3 link up (speed 1G, full duplex) mar/03 13:45:09 interface,info ether5 CRS 125 .3 link down mar/03 13:45:11 interface,info ether5 CRS 125 .3 link up (speed 1G, full duplex) ...

billjellis

Hello, Hi All, I have been having this issue with a 3011 and all active network port go down and then back up again. Of course it kills all Capsman and takes the whole network down. Started happening about 4 days ago. Any ideas? 3011 current version 6.41.2 Thanks Bill, 08:42:59 interface,info Wan li...

billjellis

I am having a similar issue i am using a 3rd party captive portal. The guest devices shows up time of 2 days but an idle time of 1 day and they cannot get connected. I delete the entry in hosts and they then get the captive portal. Ideas?

Thanks
Bill

billjellis

How do i get this version I upgraded t0 the current and it has screwed up the vlans. SwOS version 1.6 released

Bill

billjellis

How can I get the Dude to open Winbox with RoMON?
Thanks
Bill

billjellis

Hello, Same issues here. Any ideas?

billjellis

Hi All,

How can i read the autosupout,rif file. What information can i get from this file? I have a site that something goes down and then sometimes the watchdog reboots or they have to powercycle.

Thanks

Bill

billjellis

Hi All, I have hAP POE lite, current Firmware, that is powering 1 UAP AC lite and 1 NanoBeam AC 16. They will not auto-power on I have to force POE on. Any reason why this would happen. UAP lite cable 10 - 20 meter Nano beam 10 - 20 meters. I can plug in a Pico with a standard patch cable and no pro...

billjellis

Hi All,

Please explain what you mean with: Shaw sees that the Modem (restarted).
Do you mean: Shaw sees that the Modem restarted. Yes
Or do you mean: Shaw sees the Modem (and restarted it).

I will try a dumb switch.

Bill

billjellis

Hi All, I have a site that has a RB3011 (6.36) and a new 150 MB Shaw Cable modem. This has been happening for a couple of weeks now it is driving us nuts. Shaw has basically run all new cable to the Modem(it is in bridged mode) and they have replaced the modem. Shaw sees that the Modem (restarted). ...

billjellis

Hello, I have upgraded a site from Nanostion M5 to Nanobeam AC Backhauls. Now i lose randomly either all managed RB260gps POE switchs and Nanostation M2 devices o either ETH1 or ETH3. ETH5 which is still M5's and has never been lost. the ARP table on the mik does not show any of the devices or they ...

billjellis

Hello, I have sites that have both a Free basic WiFi an a paid portion. (everyone uses the same ID and password for the Free. The queues are create for the the Free Account: Maximum Limit: 512 Kbps 512Kbps Burst Rate: 512Kbps 512Kbps Burst Threshold: 512Kbps 512Kbps Burst Time: 5 Seconds I have test...

billjellis

Hello, I have been having issues at some but not all of my sites where the captive portal will fail because their default home page is at an https site mostly google.com. Another correlation was that i get seemed to get is. > ping google.ca dns name exists, but no appropriate record invalid value fo...

billjellis

I seem to be having these issues on my RB450 hotspot is there any other solution or is this the best one? Current ROS.

I bypass the MAC and get then to go to a site and then enable it. then the Captive portal shows up then they have to log back in.

Going to test this one out.

billjellis

Hello, My Radius server is expecting this 00-15-5D-00-70-00 but the mik is sending "00:15:5D:00:70:00" User-Name = "00:15:5D:00:70:00" ? I have checked out http://wiki.mikrotik.com/wiki/Manual:IP/Hotspot/Profile#Properties This just changes the Calling-Station-Id = "00-15-5D...

billjellis

Hello, I am getting this behavior on most of my Mik's RB450g various version of ROS to current, All Ubiquiti M2 AP M5 back hauls I think mostly the one with lots of AP's and back hauls. I am monitoring AP for device to be on 2 AP. or flipping back an forth. 154 A 0C:3E:9F:D8:BA:04 10.0.2.88 10.0.2.9...

billjellis

Hello,

I am trying to figure out way to get the Antenna, (all Ubiquiti M2's), which has a specific Device is on by MAC/IP.
I do not want to search 10/20 devices to find the Antenna it it on.

Diagrams only go so far to pin point the Antenna a device is connected to.

Thanks
Bill

billjellis

Stumbled upon a feature of this tonight "networx application" can give you graphs like this. It is by a company called https://www.softperfect.com/. I have been using it for years to monitor traffic on a PC.

Capture.JPG

billjellis

We have an site that has a number of wireless AP's (ubnt) and RB450 is the main router. The are are replacing a wing of their old building. the new wing will have ethernet ports in each room. These guest will in connect to the a yet to be determined switch then to the RB450. What is the best why to ...

Search found 53 matches