Community discussions

MUM Europe 2020

Search found 10 matches

by sathackr
Tue Oct 22, 2019 6:22 pm
Forum: General
Topic: I'm unable to make flashfig work!
Replies: 8
Views: 924

Re: I'm unable to make flashfig work!

6.44.3 did not work for me, same problem with Hap AC2, unknown if other models affected.

6.39.3 worked.
by sathackr
Tue Jun 18, 2019 12:22 am
Forum: General
Topic: CRS 3xx ethernet cable test
Replies: 1
Views: 315

CRS 3xx ethernet cable test

Do the CRS326 models not have the ability to perform cable test?

When I select cable test, it just says "Link OK" and doesn't give any additional information. This is on a CRS326-24G-2S+RM running 6.44.3
by sathackr
Thu Jan 10, 2019 5:20 am
Forum: Beginner Basics
Topic: vrrp with mtu
Replies: 4
Views: 651

Re: vrrp with mtu

Appears to be just cosmetic. 8000 byte ping packet works when sourced from vrrp IP address with do-not-fragment set. [admin@MikroTik1] > ping 10.10.7.1 size=8000 do-not-fragment src-address=10.10.7.5 SEQ HOST SIZE TTL TIME STATUS 0 10.10.7.1 8000 64 1ms 1 10.10.7.1 8000 64 1ms 2 10.10.7.1 8000 64 1m...
by sathackr
Thu Jan 10, 2019 5:17 am
Forum: Beginner Basics
Topic: vrrp with mtu
Replies: 4
Views: 651

Re: vrrp with mtu

I'm seeing the same thing. vrrp set on vlan interface. physical inteface mtu is 10222 vlan interface mtu is 9170 vrrp interface mtu set to 9170 but actual mtu is 1500 this is on CCR-1072, RouterOS v6.42.11 config: [admin@MikroTik1] > export compact # jan/09/2019 19:30:00 by RouterOS 6.42.11 # softwa...
by sathackr
Mon Apr 27, 2015 4:20 am
Forum: General
Topic: CCR1009-8G-1S-1S+ how to monitor dual power supply?
Replies: 4
Views: 1486

Re: CCR1009-8G-1S-1S+ how to monitor dual power supply?

For anyone who cares, you can in fact monitor both power supplies on a CCR-1009-1S-1S+ -- it's right there in system health, also available via SNMP.
by sathackr
Sat Apr 18, 2015 8:01 am
Forum: Scripting
Topic: access to more accurate UPS voltage via API or snmp?
Replies: 0
Views: 549

access to more accurate UPS voltage via API or snmp?

It seems only the integer UPS voltage is available via SNMP: zabbix:~ # snmpget 10.10.5.10 SNMPv2-SMI::mib-2.33.1.2.5.0 -v 2c -c public SNMPv2-SMI::mib-2.33.1.2.5.0 = INTEGER: 13 And not at all via the API or CLI: <<< /system/ups/print <<< >>> !re >>> =.id=*1 >>> =name=ups1 >>> =port=usbhid1 >>> =of...
by sathackr
Sat Apr 18, 2015 7:41 am
Forum: RouterBOARD hardware
Topic: CCR10009-8G-1S-1S+ Keeps Failing
Replies: 5
Views: 1590

Re: CCR10009-8G-1S-1S+ Keeps Failing

We just lost 2 back-to-back that came in on the same order. They both were deployed in late February and died in early April within 2 days of each other. MAC addresses are only a few numbers apart. Both in air-conditioned, raised-floor data center environments. Have several in much harsher condition...
by sathackr
Wed Feb 18, 2015 11:47 pm
Forum: General
Topic: CCR1009-8G-1S-1S+ how to monitor dual power supply?
Replies: 4
Views: 1486

Re: CCR1009-8G-1S-1S+ how to monitor dual power supply?

Did you ever figure this out?

I agree, two power supplies are useless if you don't know when one dies.
by sathackr
Thu Jan 22, 2015 5:09 pm
Forum: General
Topic: vlan packet flooding when bridge selected as vlan interface
Replies: 0
Views: 291

vlan packet flooding when bridge selected as vlan interface

Please forgive me if this has been covered, I searched a good bit and didn't find it posted. I'm using CCR routers, Mikrotik versions 6.23 and 6.24 I have an issue where, if a vlan interface is created with a bridge selected as it's interface, all tagged packets from the interface are flooded to all...
by sathackr
Thu Dec 25, 2014 5:48 am
Forum: Wireless Networking
Topic: Netbox 5 25.5 mile 5Gz Link
Replies: 2
Views: 1608

Re: Netbox 5 25.5 mile 5Gz Link

It must be something on your setup. I am doing a side-by-side comparison of Mikrotik NM5 AC and Rocket M5. The Mikrotik has about 4-6db better signal than the UBNT. These are connected to 2 RD30s on each end of a 22km link, mounted 5ft apart. The 3rd RD30 is for Chain2 but from what I read I need mo...