Dear thanks for this email address i will send you some stuff by tomorrow.
Lolz great email address

+1 for VM-Tools and snapshots

Dear JimmyNyholm, Nops we dont its stub network no IGP , EGP used as we have isolated core and distribution network and on core we use EGP only nothing else. Furthermore pppoe is installed on edge and pppoe wan side is our distribution layer none of server is directly connected to core and one of ou...

Dear Tom Jones,

sorry to mention that we have 10 Gb enabled network devices and using also 10 g Nic's over CHR.

Dear Tom Jones, i have found this option for specific iscsi adapter as i am not using any iscsi storage i am only using internal storage of server. Furthermore we have only one aim to reach maximum throughput with maximum pppoe tunnels along with dynamic simple queues. Do you really think that this ...

Dear Tom Jones,

Can you please tell me the same command for esxi 5.xx as your provided command is not working on esx 5.1
vsish -e set /net/tcpip/instances/defaultTcpipStack/sysctl/_net_inet_tcp_delayed_ack 0
error
VSISHPath_Form():Extraneous 'instances' in path.

Dear Tom,

Kindly share your VMX config file if its possible for you.

Dear Tom/ Experts, You may achieved that throughput on L3 traffic with Btest which i can also get approx 3G plus with our Three CCR as client and CHR as server but in real production environment CHR is very disappointed me over tunnel traffic. I have tested PPTP as well now and pppoe as i said earli...

After second tweaks i got low CPU usage on host but its down CHR throughput as well after my last tweaks CHR even drop data over 1400 to 1500 Mbps. I have also CCR1072 which is also similar issues and that also reported by other users as well in production environment. I was hope that CHR might not ...

Dear Tom, Yes i knew about Vm tweaking infarct we have used specialized high end computing network card but still no luck. one of my teak hits my Host CPU 100% with 2G but condition was same timely more users are get connected and data did not cross more than 2G. one more issue i observe that i got ...

We are having the same problem where users are getting slow service and drops over 3000 customers and huge drops over 3000 plus users. CHR using 40% CPU and host CPU utilization not exceeding more than 65% cpu if 2000 plus customers are connected results are fine but over 3000 users CPU and DATA uti...

Dear Members, Thanks for sharing technical experience , But some how we had tried to carter this with some tweaking which is still under observation. When we digging this issue in more depth we have found that its due to Packets Drop in PCQ. We have made new Queue for physical interface with 120 Mil...

Scenario Details We want to pass our 16 Gbps traffic over 20 Gbps channel where every user will get 3 Mbps or 2 Mbps with using PCQ. Scenario Details Breakup 40,0000 Queues one for each user with using Queue-type PCQ 16 Gbps Traffic Over 20 Gbps LACP Channel 3 Mbps or 2 Mbps for each user with using...

Dear fallows, I would like  to know how can i get full  log of simple queue changes in Mikrotik v6.xx like which Queue number is change with which IP and which bandwidth. in short i need full debug logs of simple queue. but in mikrotik yet i only got this message on  terminal logs regarding SIMPLE Q...

how many PPPoE connection are running on you server yet.?
how much bandwidth do you allocated for each pppoe connection

Have you tried the queueing? yes i tried. but there is a problem. I have a radius server for authentication and when a customer authenticate a simple queue is added dinamically from radius server and a pppoe-client interface is added on the interface menu. when i add a simple queue for the wan inte...

Dear Experts,

Please respond.

Dear experts, I have read that one of person is using this router for his PPPOE connection and as per him provided stats he is running 30,000 PPPOE customers on CCR1072-1G-8S+ What i want to know is this router also capability to run PPTP customer where each client have 1Mbps PPTP tunnel connection ...

ppp active print stats in not available in RouterOS 6.30rc8 via terminal and via api. We are getting issue when we are trying to get pptp user stats from RouterOS v6.30rc8. Via API we are getting diffrent IDs and via terminal stats command is not available. Is there any way to counter this issue wi...

I have one more issue that when mikrotik get 100Mbps data its high internal loop back interface response like 40 60 MS.
do any buddy know how to control this ?

Hello is there any one who is using Mikrotik RouterOS with VMware Vsphere 5.1.
I am using vsphere but there is a issue that VMNET3 network adapter is not suppoted in Mikrotik due to which we are unable to control CPU.