Full and half duplex is detected and negotiated..Because autonegotiation defaults to the lowest common denominator when the other end doesn't support it. Speed can be parallel detected, but duplex can't, so it will fall back to half duplex.
Why?it's just autonegotiation or forced speed/duplex (which needs to be half-duplex if the other side has auto-negotiation and is not forced to full-duplex, otherwise we get a duplex mismatch with high packet loss)
Yes, it can.Any ideas if this can work?
Have you tried running it from the CLI?Greetings kevinds. Unfortunately I've tried that. It starts the download, then script just stops. I'm testing it on its own, the only one in the script & fails.
This one works for me on the Spamhaus drop list.I've tried several delimiter settings but it won't download.
delimiter=("\_")
And how would you code such a task to fit with the existing processes?Easy, just apply the default "WAN" config only after you set your initial password. Problem solved.
Or like all companies do, it is printed on the product, usually near the serial number.Imagine you have to try to find the shipping box a year later for your $25k Cisco-switch to able to set ut up....
USB-Serial adapter and a null-modem cable works similarly, just isn't wireless.Too bad it has been discontinued... so those still having it, make sure to keep it safe !
What is the problem?8P 16P 24P 48P Among these 4 types, why is the 16-port product so big and different? Your product designers' concepts are really special. Can you make something acceptable to ordinary users? Or am I not finding the right product? grateful,
Yes, I saw that one too.Delta PJT-24V100WBBA ?
The footprint Is the same 2"x4" as the EPS-65-24.
The CCR products have this.What I want is ... no def config but clear router, so you missed the point...
System-Reset-No Default ConfigAs easier alternative to Netinstall, Flashfig can also be used (on first power up)
2" x 4"? No problem.. That is smaller than the original.May i know "Mean Well EPS-65-24" can be fitted into the CCR1036 case?
r3?I have a 1036 r3
I made a post but with no answer. Can someone tell me wich are the differencies ?
You need to be copy/pasting from a plain text editor..Using an SSH agent like putty and using that to paste text in seems to be better but I have still had issues with what seems to be font character differences.
That Rubycon and Panasonic are not the same though.. They are much higher quality caps.My latest failed PSU capacitor already the newer capacitor as my vendor replaced the PSU, where you cannot understand i replace the same spec capacitor will quite possibly last the same??
They do?Why doesnt MT have a return policy for such a device, customer pays for shipping back of defective unit and gets a free replacement or something reasonable etc...
Then yes, check the power supply for failing capacitors.it's flashing normally but when start it's have same proplem
Keep in mind, as I have recently found out, after ~500 days it restarts back to 0d00:00:01.Effective and simple code.
Thank you.
Alright then... For some of us it can mean needing to book a flight, so it is important to ask. hahaBut the site is not far from my actual work office.
How are the entries being added? Repopulate the list as part of a Startup script.I can't use dynamic IP timeout settings due to power failures.
How far is it? Get something to give you OOB management, even temporarily? Cellular data for example?I guess I'm going to have to test it on site, sadly I don't have OOB connection T_T.
Then why is it pingable?So i figured out, that the problem is on the route behind our mikrotik and we cant do anything with that
That isn't directly from Mikrotik, but yes, that is the solution already in place.Already available -
What happened when you did the Netinstall procedure?I make everything but same proplem
I have had the device for 4 years and have not faced any problem. Only when I updated to version 7 did I encounter this problem
Nobody has said anything like that, other than you.But if there is no interest in fixing bugs, well I'll look elsewhere.
Configured static IP from your ISP then?Dont have DHCP clients or any dhcp scripts.
It isn't the script..Not sure what to modify in script to disable this behaviour?
Not possible. There is no Supout for Winbox.exeIs this a request? Supouts should go to Mikrotik Support if you think there is a bug.
Winbox would be v3.40 or whatever version of Winbox you are using. Maybe add connecting to a v7.14 router.
Wouldn't something pynetinstall work a lot better? No need for x86 emulationLeave it like it is please.
Mouser shows 10,000 hours at 105 degrees.P.S. Just checked Rubycon 50ZLJ1000M12.5X25, the lifetime is 2,000 hours at 85 degree, that is 83 days...
Choose a previous version FreeBSD template then mount the systemrescue ISO and install according to the instructions.How to change it!? help... please)
That isn't a question..Question 2. Fan connector in the front of fan... it is weird
*shrugs* I already have one at a site, I can swap it for my RB750Gr3, just needing to transfer the configuration.At any rate DO NOT BUY A hAP ac2 !!!
Shit.. Maybe I am seeing the future.. lolI don't see anything in title bar either, at least in winbox v3.40.
If you do a bandwidth-test is the received speed 'normal'? Or is it also 1.5 mbps?The same problem, P1-perpetual license, VPS from the Zomro hoster - the traffic speed on the gigabit ethernet interface is no higher than 1.5 megabits, there are no such problems on version 6.49.13
So as swap space?I would like to know if there is a way to use the SSD disk capacity as RAM in ROS x86.
Likely a computer, not a smartphone.But to download a profile to that card I have to place it in a smartphone first or is there a way to use it without a smartphone?
It uses the IP of the interface closest to the chosen gateway.Is there any easy way to source Mikrotik activities from the LAN interface as opposed to where the default 0.0.0.0/0 points?
You quoted a link to it...?,
could you share the whole script pls ?
Because it is getting it from the local cellular tower or GNSS, the phone knows where it is.Works okay on Android, iOS though. Static is best though.
NTP doesn't do anything with time zones.My question is what databases are used by MIKROTIK to detect my geo ip or does it "fly in" from NTP server?
I'm using a modified version of this one viewtopic.php?p=935938&sid=9a9086e98c87 ... ed#p935938Which script are you have been using?
Which part? But if it is working for you, great.Thank you! How would you do that? Can you point me to some documentation?
They test it with wine, it works very well, except one version in the past, and that was quickly corrected.No builds for MAC and LInux. That will be nice addition.
How? Let's Encrypt doesn't publish their servers.The www and www-ssl IP services are running and port 80 is open for Let's Encrypt hosts:
Why?it would make sense for them to jump on that bandwagon.
That isn't OAuth?check this
The torrent is for v2 and RC v3never said anything about v2..
Is there an issue with NetInstall?its even not possible to revert them (because of constant reboot) without netintsall.
And how can you make that claim? Have you tested/tried it? What is unreliable about it?How are you able to make that claim?
I can not deploy an unreliable version of RouterOS.
They used to be different versions.. 6.x vs 6.y, now that is no longer the case. Stable and long-term are the same 6.x version now.long-term versus stable channel
This is a user forum.. Mostly users here.. There are a few employees here but not many..The fact that this is the only response I get says a lot about Mikrotik.
How do you know they were employees?I've seen a couple of Mikrotik employees look at this post.
This probably made the biggest impact.And switched L2TP VPN for WireGuard.
Why is that a problem?did try both the option but the problem is the network is on the same subnet. router == locked
network cannot change subnet yet
Instead, just remove or disable them.in dhcp client added wan1 and wan2 and use peer dns and default route = no
CHR is x86_64 though.I see what you mean.
From the 7.5 stable release notes. CHR is not mentioned at. All. Only x86.
Just use dd with the raw image.script to convert ubuntu 22 to CHR?
No. The selection (in my solution, the listed subnet) will be given the source address specified in the 'Action'It states, when the traffic is routed ( by some other function aka routing) through this interface it will be given a source address of this interface.
Why? Some of those include the others?Using this list on my setup for some years now...
Grab a support file on 7.8, downgrade to 7.7, if it works again using 7.7, open a support ticket.
Even that can be gotten around, speaking from experience.. haha Time and effort..As long as you don't blacklist EVERYTHING and only allow certain IPs/sites, there is always a way around the blocks.
I stand corrected..Ah, you do not know the quic protocol...UDP in your suggestion is not necessary.
You turn it off in the clients.Do you say that you can stop me from browsing where I want without having 100% control of the client? PC/Mobil etc.
How do you block DoH/DoQ/DoT?
Huh? Why would you use different masks?You do not need /30
/32 works with /31 on the remote side.
It may not work if your mentioned firewall is not set up properly and blocks the traffic or incorrectly set up a routing table that does not allow route traffic through the router.
You can also get those as 4+ ports.
Coupled with these DC splitters:
Going to try that tonight.Have downgraded to 6.49.7, will see how that goes...
Nothing of any significance, was watching it the last time a reboot happened.what tool/profile showing?(keep it running)
on logical reason would be, that one of those parameters getting overloaded
Every 30-60 minutes now, sometimes 5-10.7.4.1 just rebooted on me.
Less than 7.5 and 7.6 but still happening.
Open a support ticket and include the supout files..?Any way of getting Mikrotik to look at the supout files to figure out why?
7.4.1 just rebooted on me.7.4.1 seems to be stable for me, I'll update here if it still crash.
Indeed..I've got the exact same issue on a CCR1009-8G-1S-1S+ that has just started in the last couple of days.
Seems a bit of a coincidence that that three of us have the same issue starting around the same time with similar models??
Netinstall has already been done.i think is too early for netinstall.
what tool/profile showing?(keep it running)
on logical reason would be, that one of those parameters getting overloaded
These?sorry for the silly question but what adapter can be used to plug the rb5009 using the 2-pin terminal? are ther any simple dc adpater pluggable to an outlet available?
Wasn't a power supply issue.I got the exact same problem with my CCR1009-8G-1S-1S+