MikroTik

Lewis

hello all, a nice feature to future versions would be rinetd daemon... i copy from somewhere in the internet: Rinetd is a simple, but effective tool for redirecting TCP connections. "Rinetd is a single-process server which handles any number of connections to the address/port pairs specified in...

Lewis

hello all, is it somehow possible to print hostnames instead of client-id in command "ip dhcp-server lease print" ? [admin@HappyHippo] > ip dhcp-server lease print Flags: X - disabled, R - radius, D - dynamic, B - blocked # ADDRESS MAC-ADDRESS CLIENT-ID SERVER RATE-LIMIT STATUS 0 D 10.72.1...

Lewis

hello....
anybody out there ?

Lewis

routing-test is supposed to be configured from the console. yes, but how ? this my routing configuration: / routing filter add chain=OSPF_out prefix=10.0.0.0/8 prefix-length=8 action=accept comment="" \ disabled=no add chain=OSPF_out action=reject comment="" disabled=no / routin...

Lewis

First of all, you need to have routing-test package. The add the following filter rules to the /routing filter list: /routing filter add prefix=10.xxx.xxx.xxx/8 prefix-length=8 action=accept chain=OSPF_out /routing filter add action=reject chain=OSPF_out Then specify OSPF_out as the out-filter for ...

Lewis

hello....

anybody from MT staff read the above post ?

Lewis

just downloaded and installed 2.9.9 with routing-test package..

route button dissapeared from the left of winbox..
i tried to view ospf settings through ssh, everything seems ok but it cant see the neighbour routers..

does the 2.9.9 routing-test package have ospf functionality ?

Lewis

when someone tries to view dude through http, error messages coem up to the computer running Dude..

take a look...

Lewis

this would be an interesting feature...

to have 2 different network maps..
one simple, and one with all devices on a map..

Lewis

It would be very helpful in solving these problems if we could get SNMP access to such devices. Or at least get ethereal capture file with captured SNMP walk. its very difficult to get snmp access, except if you come to Thessaloniki, Greece and connect to our wireless network.. :lol: but i could pr...

Lewis

hello all,

when i right click and do an snmpwalk in a router using MT 2.8.xx i get results..
but when i try to use snmp data in a link, it does not give me the interfaces..

is it a bug or i do something wrong ?

Lewis

It's not completely clear to me what you're trying to achieve, but maybe the discussion at http://forum.mikrotik.com/viewtopic.php?t=3161 might help you to avoid redistribute-connected . --Tom I want to redistribute connected networks, but allowing only 10.xxx.xxx.xxx networks ;) Eugene got it, but...

Lewis

hello all,

i made a post about the graphs MT creates..
http://forum.mikrotik.com/viewtopic.php?p=23712

finally, MT uses MRTG for these graphs ?

Is it possibe to add the values of the last SNMP query as HTML comments within the HTML file that MRTG creates for each network link ?

Lewis

First of all, you need to have routing-test package. The add the following filter rules to the /routing filter list: /routing filter add prefix=10.xxx.xxx.xxx/8 prefix-length=8 action=accept chain=OSPF_out /routing filter add action=reject chain=OSPF_out Then specify OSPF_out as the out-filter for ...

Lewis

hi all, take a look at this... MT can see two atheros cards in /system resource pci but it cant load the driver !!! [lewis@Mik@Trilofos] > /system resource pci print # DEVICE VENDOR NAME IRQ 0 01:00.0 Trident Microsystems Blade 3D PCI/AGP (rev: 58) 11 1 00:0d.0 Realtek Semiconductor Co., Ltd. RTL-81...

Lewis

hello all, I sent the following e-mail to support@mikrotik.com, but still got no answer.. We have all of our wireless community network in Thessaloniki based on MT routers using OSPF as the routing protocol.. We use 10.xxx.xxx.xx A-Class addresses. But there is an issue with this.. Some routers have...

Lewis

the example of AThens is very nice. how can we set up a similar thing with the less programming/hw with mk ? I think its up to MT dev team to include these data in produced html page. MRTG does it by default.. on the other hand, Weathermap is very easy to install.. I suppose you noticed in weatherm...

Lewis

hello all, Graphing is a very nice feature of MT 2.9.xx but it would be nicer.. In MRTG graphs, when you see the html code you could see something like:       <!-- a...

Lewis

hello, sometimes a wireless interface seems connected, but ospf is not running. So, i want to disable/enable the interface. the following command in a terminal returns the value 1 :put [:len [/routing ospf neighbor find router-id=10.100.17.0]] when i try to execute this script, it always logs "...

Lewis

Apparently, you need to upgrade to the latest 2.9 version.

well, thats why we havent the same output..

i'll have to wait for the final release of 2.9

Lewis

works for me: Flags: A - active, B - bss, P - privacy, R - routeros-network, N - nstreme ADDRESS SSID BAND FREQ SIG RADIO-NAME AB R 00:0C:42:05:06:41 ARTS 2.4ghz-g 2494 -47 000C42050641 [admin@MA_GW] interface wireless> you didnt copy/pasted the command... how do i control the flags ? another thing...

Lewis

sometimes we scan from winbox... BUT, sometimes we have to scan from console.... this is the result of a console scan: [lewis@UOM] interface wireless> scan bb-hadji ADDRESS SSI BAND FREQ BSS PRI SIGNAL-S... ROU NST FAS RA RO 00:09:5B:96:F2:05 2.4ghz-g 2312 yes no -68 no 00:30:4F:35:FE:68 twm 2.4ghz-...

Lewis

Seems that two other interfaces are APs, aren't they? yeap... this is the problem... i tried it after changing mode from AP to station, and everything worked fine.. but this does not solve my problem... since i cannot connect 2 routers in adhoc mode, i cannot graph the one side.. @jarosoup: can you...

Lewis

24h without an answer ?

i dont believe that this happens only in MT routers in my city

Lewis

Well, take a look at this... i have 3 wireless interfaces in a MT router running 2.8.26 here is the result of interface wireless print: [admin@mt] interface wireless> print brief Flags: X - disabled, R - running # NAME MTU MAC-ADDRESS ARP 0 R bb-1 1500 00:02:6F:20:53:D2 enabled 1 R bb-2 1500 00:02:6...

Lewis

a new version is out, 2.8.27 but this is the only comment in change log is:

What's new in 2.8.27:

*) added optional wireless package for RouterBOARD R52 (Atheros 5414/13) support;

what about ospf ?

Lewis

I'm talking about a community wireless network with more than 40 MT routers, everyone has 2-5 wireless interfaces (running ospf).. and 250+ users... Since this is a closed network, without internet access, every file transfer occurs between users.. Our main routers has 12-15Mbps traffic in EACH inte...

Lewis

2.8.25 on one side, 2.8.25 on the other,
same sh#t...

do i have to downgrade to 2.7.xx ?

Lewis

2.8.25 on one side, 2.8.26 on the other,
same sh#t...

i'll try to downgrade the second one...

Lewis

anyone has 8.2.25 all-packages ?

i have to switch back.. our network is a mess with this bug...

http://usa2.mikrotik.com/download/all_p ... 2.8.25.zip

Lewis

anyone has 8.2.25 all-packages ?

i have to switch back.. our network is a mess with this bug...

Lewis

any news ?

i noticed that this happens between 2.8.26 routers.
I have a 2.8.26 box connected with 5 other MT boxes, running different versions, and ospf hungs only on one interface, this one is connected to a 2.8.26 also..

Lewis

please - everyone that has encountered this problem, please make a supout.rif file at the moment the OSPF is not working, and - with a description of the problem and your network setup, please send it to support

i just mailed a supout.rif file..

i hope this can help..

Lewis

If the mini-pci are atheros based there are some issues with via chipset and atheros.

What is the chipset of your new mobo?

Thanks

It's a SIS-based chipset.
Mobo is ECS 661FX-M

Lewis

i got this answer from MT support: Hello, no there have been no probems as far as we have tested, but maybe your computer has a resource conflict because of the many interfaces. try removing some other PCI cards or disable some unused things in the BIOS (like onboard audio, modem etc). Sincerely, No...

Lewis

i had a setup like this...
a routerboard, with original indoor box, a pci riser, a MiniPCI adapter and 4 mini-pci cards.

but performance was not what i expected...

Lewis

hello all, i had a MiniPCI adapter RouterBOARD 14 with 4 minipci atheros installed on a routerboard 220, working for 8 months without any problem. all 4 mini-pci were connected through backbone links to other mt routers. the performance was not so good, so i decided to leave one minipci on the route...

Lewis

Some quick links regarding IPIP under linux. Please beware that I haven't tried to connect a RouterOS system to a linux box via IPIP... http://www.wlug.org.nz/HowToIPIP http://www.patoche.org/LTT/security/00000175.html That should get you going for experimenting with it. And please post your findin...

Lewis

is there any way to connect an MT box with a linux box using IPIP ?

which packet should i have in the linux box ?

Lewis

hello all, i have 2 offices which i want to connect via VPN.. They are on the same ISP.. I tried IPIP but the provider seems to reject GRE packets... is there any other way to establish some kind of VPN, using MT routers ? i tried using linux boxes with openvpn and everything is ok.. but i want to u...

Lewis

wery hard, because you dont even know maximum throuput on your AP...it depends on other networks and garbage in the air... the only solution I discovered to work is to use pcq queing... i know the total available bandwidth (11mbps - 802.11b) can you give an example of this pcq queue ? you understan...

Lewis

hello all, is there any way to equally share all available bandwidth in a public Access Point ? I have an accesspoint, but closer clients get 4-5 mbps and those with less signal get bytes.. how can i create a dynamic queue to share all available bandwidth (11mbps) between connected clients ? please ...

Lewis

hello all, i have 2 Agere pci cards. i tried to install them on an MT box, but it does not recognize them. this is the result of /system resource pci print : # DEVICE VENDOR NAME IRQ 0 02:05.0 Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev: 13) 11 1 02:04.0 Intel Corp. 82557/8/9 [Ethernet Pro 100] (r...

Lewis

it seems that even though i connect to a 10.122.2.xxx address on my MT box, it answers from another interface (with a real ip)...

This is why i connect from the same lan, but not from remotelan.

Dear MT boys, is this gateway binds to a specific interface ?

Lewis

These are my settings on my MT box.. / ip telephony region / ip telephony voice-port isdn add name="isdn1" autodial="" region=germany msn="2310427343" lmsn="" playback-volume=0 \ record-volume=0 agc-on-playback=no agc-on-record=no software-aec=no aec=yes \ aec...

Lewis

hello all, I'm trying to setup an MT router as a voip gateway. I tried a Zaptel card, and an AVM isdn card with the same results.... when i call from the local network, works fine when i try from a remote network it doesnt work at all. My setup is MT router with: 1 Local ethernet interface (localnet...

Lewis

i suppose i made something wrong...

when i deleted everything and made it again from the start, it worked..

My problem is that when i try to use a limit for the user, vpn connection is disconnecting (in log file says something about user-requested disconnection..)

Lewis

i tried this also but ...

in winbox ppp/active connections the client is not shown...

the client is natted to the wireles network, is this probably the reason ?

Lewis

upgrade the router to the newest RouterOS version (2.8.14). Make sure that encryption is enabled on WinXP machine (you reqiure it in your router). Edgars I did everything, but no result... My settings in WinXP client are: Security/Advanced/MSChap+MSChap2 (require encryption) Networking/Type of VPN=...

Lewis

hello all, i'm trying to setup my MT router as pptp server... The router has a wireless interface, and two ethernet. the first ethernet is connected to the localnet (where dhcp server runs), and the second is connected to the adsl modem. first of all, i setup the pptp server... / interface pptp-serv...

Lewis

i left a question before holidays, and when i pressed reload after 15 days, my question was gone..

so, are old questions are purged ?

this is bad because this is a support forum, so every piece of knowledge must stay here...

Lewis

is there any way to add a log entry in the above script ?

for example "Setting ospf cost to $i" ?

Lewis

Nstreme is actually a 2.9 package backported to 2.8 for testing. so there are some configurations that are not in the winbox GUI. so you have to wait for 2.9 to get full winbox control.

ok, this is a fair explanation

i'll wait...

Lewis

yes...this is normal..
you have to set it up throu terminal..
/interface wireless

what do you mean by "normal" ?
they added features which are not implemented in winbox ?
thats why it is empty ?

Lewis

I also tested nstreme 9 to a backbone link, but wireless interface properties in winbox are disappeared from every wireless card !!!! I tried to delete C:\Documents and Settings\Lewis\Application Data\Mikrotik\Winbox\2.8.12 directory, download latest winbox, but i still cannot see interface properti...

Lewis

hello all, I recently found this script in MT documentation: /system script add name=bandtest source={ :global i /tool bandwidth-test 10.122.255.4 \ direction=transmit \ duration=14s \ do={ :if ($status="running") do={ :set i $tx-current } } } Lets say that 10.122.255.4 is a wireless inter...

Lewis

hello all, I was trying to setup a wireless router using atheros cards (Planet WL-8310 v3). As usual, i was configuring the ethernet interface, and i was trying to enable the wireless ones.. But, was getting kernel panic ! i tried 3 different computers, i changed all pci slots, and almost all differ...

Lewis

well, none can help ?

not even from MT support ?

Lewis

hello all, a customer uses an ADSL modem with a MT router. His ADSL line is 1024/256. When upload line goes to full, he cant download anything ! MRTG graphs 100% upload and 0% download ! I suppose this happens because ack packets cant pass... So what do i have to do to give ack packets highest prior...

Lewis

Folks, just went out and bought a Netgear WG311 V2 card today to start some more testing with my MT box, but it won't recognise it. I checked with Netgear, and they say it is the AR5212 Atheros chipset, which the supported device list indicates will work, but it just does not show. Any suggestions ...

Lewis

let me laugh... i will get the answer after the Beijing Olympics.. I sent them a mail to replace a licence in 27/5.. I resent it twice.. still no answer.. i'm answering this post, so you shouldn't be so sceptical. if you didn't get an answer, try again because i answer 100% of license concerning em...

Lewis

Is there a way to upload custom scan-lists for use by atheros based cards? not directly. you can only add frequencies like this : /interface wireless set wlan1 scanl-list=default-ism,2442,2345 basically you could make an export file, modify it and then import in where you want. `interface wireless ...

Lewis

Is there a way to upload custom scan-lists for use by atheros based cards? not directly. you can only add frequencies like this : /interface wireless set wlan1 scanl-list=default-ism,2442,2345 basically you could make an export file, modify it and then import in where you want. `interface wireless ...

Lewis

I am also very interested to know what MIB's to use for queue trees, as well as for signal level on a wireless interface.

if you do a snmpwalk, you will find out what you ask.
but, signal levels cannot be displayed with mrtg, because they contain negative values..

you should use rrdtool..

Lewis

hello all, I have a hotspot configured in an external ethernet AP device with the wizard.. As far as I checked, it works fine.. I want to allow a specific client to connect with his MT router, to this AP, without all this login procedure. how can i do this ? Should I give him a static ip ? What do I...

Search found 65 matches

[Request] Rinetd

[REQUEST] /ip dhcp-server lease print

Dude error messages..

Copy-Paste devices and links across different maps..

SNMP with Mikrotik 2.8.xx

[Feature Request] MT Graphs

Problem with Atheros Driver

OSPF filtering

[FEATURE REQUEST] mikrotik graphs

finding OSPF dead neighbor...

[suggestion] Scanning from a wireless interface

snmp problem - reads irrelevant information

MiniPCI adapter RouterBOARD 14 problem

My provider rejects GRE packets....

Equally share available bandwidth in a public Access Point

Agere chipset

VoIP gateway

MT as pptp server

are old topics purged ?

Automatic OSPF cost change after bandwidth test

Arghhhh.... after 48h with atheros troubleshooting....

QoS - a simple advise...

Re: Wireless Cards

Re: Scan-lists

Re: Scan-lists

Re: Scan-lists

Re: snmp graphing of queue trees

Hotspot question