MikroTik

UMarcus

LtAP has the single USB3.0 port routed to the miniPCIe slot, so only USB2.0 is available at the external USB connector; on RBM33G, the USB3.0 is only available at the external connector, not on any of the miniPCIe slots (nor the M.2 one).

In which case I need USB routed to the miniPCIe ?

UMarcus

Hi Guys, thank you for your responses and great thoughts. Yepp, good point i also have to look into the cabling stuff :-) About the LtAP looks like a great device also supporting two miniPCI which will cover the needs by installing an LTE and LORA card, on other hand the price will be higher than th...

UMarcus

Will this work, see Screenshot attached.

What confusing me are the possible LTE/4G cards, which one will work for O2 LTE Germany ?
Did a need a LTE Antenna ? Is the mANT LTE the right one ?

Thanks
Marcus

UMarcus

Hi raystream, i'm looking for a solution or better a device which provide following features LTE - international (O2 / German band) LORA8 LAN My idea was to use the RBM33G together with the PCI cards one for LTE and one for LORA8. But I'm not sure if it is working and how stable it is, did you got s...

UMarcus

+1! do you have a release date yet? i just talked to the local distributor in hungary, they already received the price list that includes lora stuff: R11e-LoRa8 wAP2ND+R11e-LoRa8 and an ~1m long tuned omni antenna for lora this tells me that availability is pretty much imminent Cool. Thx for the Up...

UMarcus

MikroTik announced a new product in Vienna a few weeks ago. It will be a wAP 2GHz outdoor AP with Lorawan card inside. You will be able to forward all sensor readings to any external Lora portal, like Thethingsnetwork, Loriot etc. wAPR-2nD&R11e-LoRa8 - LoRa gateway for ISM 863-870MHz bands with...

UMarcus

UMarcus: are you sure Hap lite has been updated ?? I've tried also to update via /system packages and manually via file upload, it seems it still fails.... npk file is displayed on files section , winbox reports 16MB of16MB used, maybe no more space allowed for updating process.... For me its worki...

UMarcus

Install it on hap Lite, hap AC2 without issues.

hap Lite memory issue solved for me. Thx.

One Note : hap Lite shows still 6.45.1 as current Routerboard FW.

Regards

UMarcus

Double post.
Sorry

UMarcus

*) wireless - improved 802.11ac stability for all ARM devices with wireless;

May you could give a little more details here ?

Anyhow I got the feeling that more of my devices connected to the 5GHz Band instead of 2.4GHz.
So I love the improvements. Thanks for that !

UMarcus

I can not upgrade hAP lite - not enough space.

Same for me

UMarcus

Upgraded RB4011 from 6.44.3 to 6.45.1 - no issues Well, actually there is one - the bridge MAC address has changed so the network discovery on Windows must be done again. In my case the bridge MAC addr is the same as for eth7 interface. Interesting what it depends on... Best Bam Good to know. At th...

UMarcus

Upgraded RB4011 from 6.44.3 to 6.45.1 - no issues Well, actually there is one - the bridge MAC address has changed so the network discovery on Windows must be done again. In my case the bridge MAC addr is the same as for eth7 interface. Interesting what it depends on... Best Bam Here same issue on ...

UMarcus

one hap lite wont upgrade. I suspect space problem.
I confirm. upgrade problem on hap lite.

My hap lite upgrade with no issues.

UMarcus

After two day's with local forwarding I get the impression that WLAN roaming between the cap's is more stuck and sometimes with complete interrupt of WLAN signal :( May I go back to CAPsMAN forwarding to cross check this observation. If it turns out that WLAN roaming with CAPsMAN forwarding is bette...

UMarcus

Thank you for the Information. Good to know.

I never use PPoE with my MT Devices as my ISP provide cable network (DOCSIS).

As mentioned until now I never face any issues with VLAN Switch on HAP AC2. May be because I use them mainly as CAP and rarely as switch in some edge cases.

Regards
Marcus

UMarcus

You are absolutely right. Limit bandwidth to CPU is the bigger issue.

What about the bug on hap ac2 ! I use three of them in my network. But I never face issues with switch traffic on that devices ?

UMarcus

Again many thanks for your explanation. For me it is confusing to have multiple option to do the same thing. I love the approach to do all in the bridge configuration as this is from my perspective the most intuitive way. Also the 'current tagged / untagged' list helps to confirm correct configurati...

UMarcus

So I ... add the WLAN1 to the bridge ! This doesn't seem to hurt but it seems it's not necessary ... I've had wlan1 interface added to bridge as well. However, when I was looking around while preparing my previous answer, I set /interface wireless cap set enabled=no , removed wlan1 interface from b...

UMarcus

You are right ! Now it is working. Many thanks for the hint. So I removed the VLAN110 interface from the bridge and add the WLAN1 to the bridge ! It seems that I always forgot to add the wlan1 to the bridge interface while playing around with the settings (stupid user :-) ) Now I get following outpu...

UMarcus

Hello. I try to get my CAPsMAN configuration running with local forwarding enable, but I still fail. :-( To show my configuration I prepare a spare device on my desk with minimal configuration for testing. I think the issue is related to my additional VLAN / bridge configuration. I want to have the ...

UMarcus

I love the annoucment of this product

Any news about the release date ?

UMarcus

Thank you all for the useful answers.

So I need to go with CRS326 and not waiting for an smaller CRS3xx with SFP+

Regards

UMarcus

https://mikrotik.com/product/CRS210-8G-2SplusIN

Oh completely overlook, thanks for the hint.

Anyhow why is this device ~ double price than the CSS326-24G-2S+RM

I hope Mikrotik update the CSS3xx Series with such an device in price region smaller $100.

Regards

UMarcus

Please Mikrotik, provide an new Switch with 8 port Gigabit Ethernet 2 port SFP+ Indoor Case Naming : CSS310-8G-2S+IN This would be a beautiful, affordable device to upgrade existing SOHO infrastructure to 10 Gbps speeds over regular familiar twisted-pair via S+RJ10. Please :-) Best Regards Marcus

UMarcus

*) wireless - improved compatibility with specific wireless AC standard clients;

What does 'improve compatibility' mean ? Also speed related ?

UMarcus

viewtopic.php?f=21&t=128915&start=250#p638556

Seems to be fixed in this version. Great

UMarcus

.. * new hAP ac² Dual Band Desktop AP, $69 ... Does this device provide more real WLAN throughput as the hAP ac (i saw never more than ~130MBit even if i had a 866MBit WIFI 5GHz connection) ? See this post: https://forum.mikrotik.com/viewtopic.php?f=7&t=113830 Im seeing same max speed issues (o...

UMarcus

Umarcus , wireless throughput strongly depends on client wireless interface (1chain/2chain/3chain/etc.). hAP AC and modern macbook may reach ~600-700Mbps, hAP AC to hAP AC ~700Mbps of _real_ throughput. Ok. May be it also depend on the CAPsMAN configuration ? If yes what are the most limit factor ?...

UMarcus

..
* new hAP ac² Dual Band Desktop AP, $69
...

Does this device provide more real WLAN throughput as the hAP ac (i saw never more than ~130MBit even if i had a 866MBit WIFI 5GHz connection) ?

UMarcus

Hello, i had update all my Devices (CRS124, HAP and HAP Lite) to 6.41. Now I get errors like 'port received packet with own address as source address' and a packet storm. Network is down. The configuration is 3x HAP and 2 HAP lite as CAP and the CRS124 as CAPSMAN and 5 VLAN Networks. This only happe...

UMarcus

Hello, i have a DSL Line with Donwload Bandwidth of ~11M. Now i try to prioritze the traffic of some networks over another. Goal is that prioritize networks get full speed of 11M and other gets 0M until some bandwidth are left. I configure 3 queues, one as parent the other two as children to match t...

UMarcus

Hello, how the CAP device(s) properties are set if i not explicit configured in CAPsMAN. For e.g. Wireless HT tx/rx chain or extension channel ? Do i need different configurations for different hardware e.g. b/g and b/g/n devices if I want that they work in maximum possible connection speed or leave...

UMarcus

Please take a look to this Topic, there are some pictures of hap device with external antennas mod.

http://forum.mikrotik.com/viewtopic.php?t=97980

UMarcus

Hi Jarda, thank you for your fast answer. Sorry but i not get the point. What do you mean with mix network structure ? To Manage the 2.4Ghz network i use CAPsMAN, the 5GHz is just to connect the not wired devices. Actual i have one not wired device which is connected via P2P (Station Bridge, NV2) to...

UMarcus

Hi All, i need to use some hap Lite Ac to get a 2.4Ghz network which provide whole area with good quality. I use the 5Ghz Radios only if i could not wire an Device (backbone), not as 5Ghz AP at all. What would best practice to connect a second not wired device to first not wired device ? (Wired Devi...

UMarcus

Hi,
take look to this guide, there are some hints to avoid connection loose.

http://harry.subnetworx.de/2014/02/21/r ... ion-guide/

May be it helps.

Regards
Marcus

UMarcus

+1

Please improve roaming.

Add actual standards 802.11r, 802.11k and 802.11v.. + controller based roaming would be great.+++

Please keep us informed in this issue ! Any comments from milkrotik ?! .. is it planed ? or is it no possible with current hardware ?

UMarcus

Hi, as i remember correctly PPTP initial communication goes thru port 1723, so maybe mangle and route packages of that port to your WAN2 are possible solution.

Regards
Marcus

UMarcus

Please add functionality to enter Connection or Packet Mark in L2TP Client Profiles, because currently there is no way to Mangle different L2TP Client connections ('Dial Out Routing'). Thanks, regards Marcus Have you tried assigning a different address pool to each client profile, and doing the man...

UMarcus

Any comments on that ?

UMarcus

UMarcus

Did you check the connection list and connection marks ? You could also observe amount of packets / byte usage of the mangle entries in the firewall mangle table... mabe reset counters... Make a internet speedtests from PC and observer your realtime traffic on the WAN ports. Did you look into to wi...

UMarcus

Please take a look to this presentation http://mum.mikrotik.com/presentations/US12/tomas.pdf

UMarcus

Did you check the connection list and connection marks ? You could also observe amount of packets / byte usage of the mangle entries in the firewall mangle table... mabe reset counters... Make a internet speedtests from PC and observer your realtime traffic on the WAN ports. Did you look into to wik...

UMarcus

Hi, i'm not study your configuration in detail, but i guess this values could get by chance. For a simple check you could take a look to the Connections List in the Firewall Dialog. There are the actual connections listed with connection mak. Also the actual flow of your screenshot not confirm that ...

UMarcus

Hi, from my point of view it looks good. You have traffic on all 4 WAN's. Two Point's to keep in mind : 1. With PPC it is not gurant that the connections (Source IP/Port <> Target IP/Port) uniformly distributed, well the uniformly distribution will be increase with count of connections. 2. At least ...

UMarcus

You need an external router as gateway. This mean you need an Mikrotik Router in a Datacenter / Colocation or may be as vServer running RouterOS x86 (for e.g. EDIS vServer). Than it is possible to connect your 'home' mikrotik router to that external router via Tunnels. One Tunnel per WAN Line. The e...

UMarcus

In general it is not possible to bond WAN connections if your ISP not support that (MLPPP bonding). This mean traffic of an internet connection (Source IP/Port <> Destination IP/Port) need to flow and stick to an single WAN line. The balancer could balance connections between the WAN. So if you hav...

UMarcus

I'dont know the version 3.7 and the provided features.. and... may be i'm not get the point. But in general, if your ISP not support MLPPP, bonding is still posibble with an external Mikrotik Router as Gateway, may be in colocation or as vServer. Actual I bond 4 DSL Lines from different ISP's. regar...

UMarcus

In general it is not possible to bond WAN connections if your ISP not support that (MLPPP bonding). This mean traffic of an internet connection (Source IP/Port <> Destination IP/Port) need to flow and stick to an single WAN line. The balancer could balance connections between the WAN. So if you have...

UMarcus

From my point of view the decision which one is the most suitable depend on some factors. For e.g. how many users, how many connection per user, is the bandwidth / latence of all WAN connections equal .. PPC is most recmommended. NTH may be prefered in szenario with less users Bandwitdh may be prefe...

UMarcus

It works as expected. I do my configuration based on that presentation to load balance between a DSL and SAT Line. Goal was that the high latency SAT line only jump in if the DSL line are full loaded (bandwith limit are reached). It works well. Additional i add NTH strategy if both lines are full lo...

UMarcus

ufm , 6.32.3 is new current version, current version can include new features and fixes. Sorry, but I did not understand your versioning strategy at all :? I know there was an thread to discuss, but may be you could give again an short explanation ? What is the difference to set the version to 6.32...

UMarcus

I wonder how the electricity power is distributed to the houses if there couldn't be any conductive wiring in between.... Problem is the grounding earth of each building which would be connected together if LAN cable (CAT) is used. http://www.iebmedia.com/index.php?id=8089&parentid=63&theme...

UMarcus

You didn't get the irony... of course I didn't. I'm not a profissional in this area, I practise network only as a hobby. So, sfp is useless for home network? or there are homes that need that, which ones? I'm a home / hobby user too, but i need the SFP Port to connect my house and the neighbor's ho...

UMarcus

Hi, yes, see example of NTH in the mikrotik wiki. http://wiki.mikrotik.com/wiki/NTH_load_balancing_with_masquerade regards Marcus Don't, use PCC - less problems: http://wiki.mikrotik.com/wiki/Manual:PCC#Application_Example_-_Load_Balancing I‘m not an super expert, but IMO if the described behavior ...

UMarcus

Hi,
yes, see example of NTH in the mikrotik wiki.

http://wiki.mikrotik.com/wiki/NTH_load_ ... masquerade

regards
Marcus

UMarcus

Sorry for beeing late ..

Escape yould be

'teste.com.br\/servicos.html'

May be you could replace it with a expression which says 'any character for once' like '.{1}'

'teste.com.br.{1}servicos.html'

Regrads
Marcus

UMarcus

Please add functionality to enter Connection or Packet Mark in L2TP Client Profiles, because currently there is no way to Mangle different L2TP Client connections ('Dial Out Routing').

Thanks,
regards
Marcus

UMarcus

Sadly no news about RB3011

UMarcus

move -> http://forum.mikrotik.com/viewtopic.php?f=1&t=100178

UMarcus

Regarding Bonding : I use only Mikroikt Routers to accomplish that. Currently i bond 4 DSL Lines. First you need an external Point as Gateway which able to provide your expected maximal Bandwitdh. Therfore I installed a Mikrotik Router in a Datacenter which provide Colocation. Next you connect tunne...

UMarcus

Yes, that's right. To minimize worst szenario use more fileds from header to get higher variation of the hash value. Other possible load balancing strategy are NTH, Bandtwidth Based to SUM Bandwidth you need either support from your ISP for Bonding Protocol or an external Router / VM in a DataCenter...

UMarcus

May be ^.*test.com.br/servicos.html.*

But i'm not sure if you need to escape some characters for example the '/'

UMarcus

About release strategy: From my point of view short term support are no great advantage in face of effort for mikrotik to handle it. Maybe another practicable path is : Define a feature milestone package, if all features implemented than make a feature freeze of this release and provide LTS. Than go...

UMarcus

Bandwidth is small, 3 or 2 MBit per DSL Line (currently no more available in my village

). Actual 3 + 3 + 2 Mbit bonded via L2TP Tunnels, result in ~7.5Mbit throughput.

Per WLAN an additional 2 Mbit Line shall be integrated.

UMarcus

Yes thats right, properly tuned, that's why i'm asking

Much more ? Please keep in mind 1ms or 2ms are 10%-20% from 10ms, a stable 1ms connection is ok, recently i try a 2.4GHz TP Link / OpenWRT setup, result was it is not stable, i get latency between 2ms to 10ms.

Regards
Marcus

UMarcus

You are right, low and stable latency would be need to get high bonding performance.

UMarcus

Hi Pukkita, many thanks for your answer. I want two bond 4 DSL Lines.3 DSL Lines (Modems) weired connected to the router and already bonded. Additional i plan to add 1 DSL Line from the neighbor building over WLAN. Problem with bonding is that included DSL Connections should have near the same low l...

UMarcus

Thank you for replay. I will try, any other options which could impact the latency ?

UMarcus

An additional question came up

http://forum.mikrotik.com/viewtopic.php?f=2&t=97800

UMarcus

Hi, i will setup a 5Ghz STX Lite Bridge which has lowest possible latency. Bandwidth is secondary. I want to bond DSL Lines, 3 wired connected lines already bonded. Now an additional line should integrated to the bonding. But this line will be connected over the WLAN Bridge, not wired. Therefore I l...

UMarcus

Many thanks for you answers, i will order the SXT 5 lite.

Cheers
Marcus

UMarcus

Many thanks for your response.

I will give the SXT5 a try, because the 2.4GHz is heavy used in the hood.

Did you expect some problems because the distance is to near, i have read that this could be a problem for station who are designed to bridge km's ?

Regards
Marcus

UMarcus

Hello, i want to connect two Buildings via 5GHz P2P, Distance ~80m, Wireless Stations would be mount outside the Building A and inside the Building B behind the outside Wall. I looking for a solution with lowest Latency, Bandwidth is secondary but should min. real 10MBit. I plan to use the SXT 5 lit...

UMarcus

Hi, i'm not sure that I understood you right.

But may be you could allow connections to L2TP Port (1701) from specific Interface only.

Regards
Marcus

UMarcus

I want to optimize my Load Balancing strategy. I have to Load Balance a DSL and SKY DSL Line which relay different in behaviours..

I will look into the 'dst-limit' in more detail.. thanks

regards
Marcus

UMarcus

Hello, i want to mangle my traffic / connections with following logic. Mark connections per each src-ip First new Connection of src-ip Second new connection of src-ip Could anyone give me a hint how to define the mangle for this behaviour ? I think aboout PCC / NTH maybe dynamic adress list, but i c...

UMarcus

Try queue type "ethernet-default"

I guess this is already testet by src without success :

Received response from Mikrotik. The same "change queue type" answer. Still not working. Will keep you guys informed how it goes.

UMarcus

If the hosting provider gives the keyboard and mouse connections from their own IP-kvm, then you don't need to network attach the Pi - just connect their kvm cables and a serial cable to the console of the 2011. (If Pi doesn't have serial, I'm sure there's a similar tiny-board PC that will) Ah, you...

UMarcus

Many thanks for your answers. This is my private pleasure, so the RSM 8R8 is a nice device, but it is defently unbudgeted :( May be i'm lucky enough to get this support from the provide. I love the idea with the PI as fail over consol access device, but this is a little to much effort at the moment....

UMarcus

Hi All. I plan to install a RB2011 Router in Network Operation Center (Colocation) which is 2h faraway. What is the best solution if fail to connect to the router ? For e.g. configuration issue or after a software update ? From the Colocation provider there is some functionality for remote servicing...

UMarcus

Thanks for keeping us updated. Very interested to see something from Mikrotik support.

+1

UMarcus

In general you need to identify the traffic and mark the connection, additional you need to route this marked connection to the specific network by define the routes with routing mark. Also you should think about the traffic, may be there is traffic from you LAN to WAN, from WAN to LAN ... /ip firew...

UMarcus

Hello, recently i do exaxt the same configuration. In my case i looking for a solution to have bandwidth load balancing with two dsl lines. I do my setup as described here: http://mum.mikrotik.com/presentations/US12/tomas.pdf Key is to define a script which make changes in the firewall mangle table,...

UMarcus

Less Packet Loss with my CRS125 RoS 6.27 Probe ping -s 10000 -i 0.001 -q -c 5000 5000 packets transmitted, 4980 received, 0% packet loss, time 5286ms rtt min/avg/max/mdev = 0.643/0.785/54.237/1.705 ms, pipe 6 5000 packets transmitted, 4995 received, 0% packet loss, time 5089ms rtt min/avg/max/mdev =...

UMarcus

Please give more details. In general you should consider, if you want to do with VLAN than you need to add the VLAN Tag to the Packet before it processed by the switch internal. May be in your case this could be done either : a. by the client, than you have to add the port as 'tagged' port to the VL...

UMarcus

For e.g. NTH could be used for rr Load Balancing of WAN's.

Please look here

http://wiki.mikrotik.com/wiki/NTH_load_ ... masquerade

UMarcus

Issue caused by wrong Switch Chip VLAN Setup.

UMarcus

Hello, i have a problem with DHCP offer to DEBIAN Server. Configuration is : DEBIAN Server ETH1, VLAN320,330,340 all as DHCP Client MT-RB CRS125 VLAN320,330,340 all as DHCP Server The DHCP Request in VLAN320,330 work as expectd, but in VLAN340 the CRS125 offers the request but the DEBIAN Server not ...

UMarcus

Hi, many thank for your explanation. That helps a lot. So there is no way to get prioritize Traffic without setting limits ? You described the way to go with HTB, is this also possible wit Simple Queues / Global Queues ? Major difference ? The reason why I would not set a limit is that my ISP have n...

UMarcus

Hello. I'm a newbie with queues and QoS. I try to understand the simple queues. I want to prioritize DNS Traffic. Assumed i already setup the mangle to mark DNS Connection and Packets. What i need to setup the Simple Queue to prioritize that traffic ? Is it just that simple that i set the priority o...

UMarcus

The solution here was to add 'sa-learning=yes customer-vid=0'

/interface ethernet switch ingress-vlan-translation
add new-customer-vid=100 sa-learning=yes customer-vid=0 ports=e7-ergo,e24-pca,e23-drucker,e22-spare,e21-as

UMarcus

Hi All. recently i bought a CRS125, create pice for the price. I confgiured a Netwrok Setup with some VLAN's, managed by the CRS and try to configure the swich chip to get wired speed between the VLAN memebers. But if i copied a large file i get CPU load and the interface dialog show some unexpected...

Search found 95 matches