MikroTik

poolip

based on this i understand i did not need filter rule

/ip/firewall/address-list/
add list=bgp-networks address=6.6.4.0/22

/ip/route
add dst-address=6.6.4.0/22 blackhole

/routing/bgp/connection
set peer_name output.network=bgp-networks

so is this enough?

poolip

Hi
I have BGP filter rule in my router os version 6.47 to advertise range 6.6.40/22 for me and also uncheck synchronronize in network
/routing filter
add action=accept chain=OUT-BGP prefix=6.6.4.0/22 prefix-length=22-24
but in version 7 i didnot now how can do it?
Can any one help me

poolip

guys im not basic user fortunately.
i have just 2 device all thing work .other tunnel work fine.but wireguard not
i do all thing in mikrotik example

poolip

why i need default config?
i do basic config in my router.its not complex thing .wireguared tunnel run but when i ping each tunnel side its timeout
i think it didnot related to basic config at all.

poolip

both router reset with no default config
same problem still

poolip

yes both router config from empty.this is 2 new router rb751 and rb951 with ros version 7.5 # jan/02/1970 03:58:49 by RouterOS 7.5 # software id = 0WJ4-WSVX # # model = 751G-2HnD # serial number = 2F7A023AFD45 /interface ethernet set [ find default-name=ether1 ] name="Eth 01 - WAN" /interf...

poolip

this is al config
export file

poolip

R1: /interface wireless set [ find default-name=wlan1 ] ssid=MikroTik /interface wireguard add listen-port=13231 mtu=1412 name=Wi-01 /interface wireless security-profiles set [ find default=yes ] supplicant-identity=MikroTik /interface wireguard peers add allowed-address=0.0.0.0/0 interface=Wi-01 pu...

poolip

Flags: X - disabled; R - running 0 R name="wireguard1" mtu=1420 listen-port=24520 private-key="KNcCDU9C4T6psjjUCF7NWUDi9hknw33chc0Q07C0bFF=" public-key="3T1kdtIsnksUBiHOtMJyFBrHxfInvPCaFT+HUJxqZWo=" peer config : 0 wireguard1 qEd6f6QjGwKgOyWXh1vdw5X9PmrCKUDESbvU6Pot3j0=...

poolip

Hi guys
I want to know dose mikrotik wireguard need public static ip in both side?
i have public static ip in one site but another side not have static ip
I use my smart phone for one side
tunnel has revive but not send

poolip

any help?

poolip

Hello All I have a l2tp client connection that work on windows but dosent connect in mikrotik This is setting in windows: 1)Type of VPN: Layer 2 Tunneling protocol with ipsec 2)data encryption:Maximum strengh encryption 3)Microsoft chap version 2 checked 4)use preshared key for authentication But co...

poolip

Hello
i have problem with filtering 443 web site by tls host
/ip firewall filter add chain=forward dst-port=443 protocol=tcp tls-host=*.google.com action=reject

this is my rule.but i not block google.com
any one have same problem?

poolip

hi guys how are you?
first i want to know difference between WAP LTE and WAP R? And LtAP Mini with LtAP Mini LTE? i think devices that write lte have built in LTE modem ?is it true?

then i need a device support 2, 4G sim Card with lowest price.so what is your suggestion?
Thank you

poolip

Hi friends

I have a problem in hotspot. when I set data traffic limit in hotspot user, the hotspot compute local network traffic and users traffic limits end. I want only limit internet data traffic not local network.what should i do?

poolip

Hello
We need ISG function like cisco on mikrotik?
any one can help?

poolip

Hello I have web site in my local network on my server with ip 192.168.1.10 port 1080 and i have public ip . i have dst.nat for users that are out of my network and rule is ok and users can open we site but in my local network i want to open web site with public ip too but i cant open it with public...

poolip

According to what you write, the floor2 AP has a better signal at floor3. So the station connects to that.
Maybe the floor3 AP is in a bad location?

In any case it would be better to run separate cables to each AP instead of using mesh.

floor 3 AP signal is -45%
floor 2 AP signal is -70%

poolip

no solution?

poolip

Hello I setup WDS in Place in 3 Floor with 3 AP Floor 1 -Floor 2- Floor 3 I use static mesh. floor 1 and 3 connect to floor 2 problem is in floor 3 and 1 when i change from floor 2 to 3 signal of Floor 2 is -70% and signal of Floor 3 is -45% but our station connect to Floor 2 ap. I want my station c...

poolip

Hello
We have bgp link that has error hold timer expire error .after this link goes down
What is problem ??

poolip

Hello guys http://uupload.ir/files/ij2a_index.jpg we have this network.in rb 450 side we have 2 dhcp server for client and server .rb 750 and rb 450 connect together via wireless link (30 km) we want to our client and server in rb750 side get ip from rb450.so we use eoip tunnel and bridge it with po...

poolip

hello i have 2 lhg and i config it as ap and st in both of the i create bridge and add ether and wlan on bridge i connect them but on station i got this error (bridge port received packet with own address as source address) and i cant connect each this and i cant ping device in other side i test ver...

poolip

Hello
I want to enable SNMP in my router and I want my monitoring server just monitor one of my router port
So how can do this limit ??
I don't want monitoring server can monitor other port in my router??

Sent from my Lenovo K910 using Tapatalk

poolip

hi guy i want to add my domain name like poolip.com to the my network clients nic when they get ip from my mikrotik dhcp server i set domain in /ip dhcp networks domain but windows show private network or private Instead of poolip.com so what should i do? thank all http://www.sharefile.ir/uploads/14...

poolip

hi friends i have a question about dns redirect i know if we want to use my router as dns server for my local network we write this rule chain:dst-nat protocol:udp port:53 action:dst-nat to port:53 so my question is this:we use above rule when my router has internet? suppose my router has 1 public i...

poolip

hi guys .i have some questions about mikrotik web proxy
1.what anonymous check box do in web proxy?
2.if we enable transparent web proxy ,can we use port forwarding for my local network?

poolip

any suggestion?

poolip

hello friends i have radius for my ppppoe user in my network.sometimes my radius get timeout for this i need this soution after my radius get timeout i need any pppoe user with any user and password can connect to my mikrotik like default user in nttac for example i define a user and password in ppp...

poolip

hello friend
i have a 951ui for my network and connect usb flash for cashing.after a few month i want to connect another usb flash with more memory.but my device dosent know it?
i tried 2 more usb but same problem.dose any one can help me?
thank u

poolip

Well, i have hotspot and customized login script and it starts default browser automatically after connecting CPE's to AP.

can you explain it for me or send me your script?

poolip

hi
i have hotspot.when users connect to my wifi thay should open browser to redirect to login page.bu now i want to know how can i setup my hotspot to open login page automatically after user connect to wifi?
thanks so much

poolip

Bump...

Support? I'm having the same kind of problems on two CCR1036-12G-4S routers. They refuse to boot over ethernet using Netinstall.

I did it but has same problem again

poolip

hello
i have problem when i update my router to new v.now current v is 6.10 and router has no problem but when i update it to 6.30 i see loading kernel from nand and router stop
what should i do?

poolip

Have you configured the router to boot from the network? You should connect Eth8. Yes I configured to boot from network and I connect eth8 hi i boot it from eth and i install ros but now when i install ros v6.10 i have no problem and router boot but when i install v 6.30.2 router goes loading kerne...

poolip

Have you configured the router to boot from the network? You should connect Eth8.

Yes I configured to boot from network and I connect eth8

poolip

Stop the boot process on the console and tell the router to boot from the network and have the net install server ready.

http://wiki.mikrotik.com/wiki/Manual:Netinstall

I enabled network boot but net install dosent know router.I tried it but no result

poolip

Are you using a Serial cable to connect to the CCR1009 ? It should give you the option to boot from the network to uset NetInstall. That is how I recovered mine. i connect to router via consul but i see kernel loading failed too. then i format nand and repartition.now i have 2 partition nand size i...

poolip

Have you tried doing a NetInstall?? I had a smilar issue with a CCR1009-8G-1S-1S+PC - but solved it by reinstalling RouterOS and later partitioning the flash storage into two 64MB slots.

yes i use netinstall but still has problem but didnt do partotioning becuse stop in loadin kernel

poolip

hi
my ccr stop in loading kernel from nand when i turn it on.i try net install and use 6.30 pakage but router turn on and again reboot .
use ersion 6.10 router dosent reboot but stop in loadin kernel from nand
what should i do for this problem?

poolip

i changed power adapter but problem not resolve.i use hard reset but dosent work

poolip

hello
i use nv2 but bandwidth is lower and have ping time problem. i use nstream too.nstream ping time is very good but bandwidth is 20%lower than ac
i tested all queue type.but i have problem too

poolip

You should reinstall this device with Netinstall to the latest version of RouterOS (6.27). If problem persist, then connect to serial console and check what you can see while device is booting up. http://wiki.mikrotik.com/wiki/Manual:Netinstall http://www.mikrotik.com/download hi i cant reisntall b...

poolip

i have ac wifi link .in low bandwidth i have no problem with ping time and packet lost but when trrafic go up ping time go around 40 ms and i have lot of packet lost. there isnt any problem when is use bandwidth test between wireless(about 200M/200M) but in each side i have ccr that connected to the...

poolip

hi friends
i have a 1200 router that reboot.when i plug power cable to router router boot and have beep sound and again reboot
i can connect it becuse dosent boot and just reboot
what should i do for this problem?

poolip

This is extremely pleasant and nice post....You shook posting it.....Thanks a ton for posting it....!!!

do you have any idea.....?!

poolip

Don't you use partitions, do you?

Partition?
I just use netinstall and did not use any thing else
what should i do for this?
after reset Some times connect with 10Mb some times 100Mb too

poolip

hi friends i have 5 411 ah that have same problem. when open router os via winbox for firest time i dont have any problem and i can add ip address to them after reboot router the router reboot but i cant ping it again or i can open it via winbox putty and ....and when i diconnect lan cable from port...

poolip

Actually, now that I am thinking of it again, I got it wrong The connection that I calculated as 1125kB, means a connection at a given time, not over 30 seconds. I have to rethink about it again, sorry.

i think one of the best soultion for this is use connection rate.

poolip

Let's think of it this way. If a connection has 300kbs for 30s, it means there are at least 9000kbps or 1125kB. Create a rule in firewall mangle: /ip firewall mangle add chain=forward action=add-dst-to-address-list protocol=tcp address-list=test address-list-timeout=1m in-interface=WAN out-interfac...

poolip

hi friends
i want to know how i can put automatic queue for user for this senarios:
if download speed of be 150-300k in 30 s then queue 1 be active and user speed be 30k for 1 minute
thanks alot

Search found 51 matches