Community discussions

MUM Europe 2020

Search found 97 matches

by Fumi
Sat Apr 12, 2014 9:25 pm
Forum: Wireless Networking
Topic: PTMP best solution
Replies: 3
Views: 1280

Re: PTMP best solution

Thanks for yout reply rickfrey!
I can fleixble on that!
by Fumi
Thu Apr 10, 2014 10:10 am
Forum: Wireless Networking
Topic: PTMP best solution
Replies: 3
Views: 1280

PTMP best solution

Dear Mikrotik people!

I have a problem! I need to setup 30 clients wds with one BS but this configuration give me some problems. I think the problem is with broadcast traffic.

I think that I can use route configuration but I ask you for other ideas.

Thanks!
by Fumi
Tue Feb 18, 2014 5:01 pm
Forum: Wireless Networking
Topic: Different chains
Replies: 1
Views: 553

Different chains

Dear Mikrotik people!

I have a question.. I have a r52HN with two chains... Can I use one chain chian0 with on antena directional to zona A (right zone) and chain1 orientat to zone B (left zona)?? Can I use on radio to radiate in two diferent orientations?

Thanks!
by Fumi
Mon Feb 17, 2014 10:45 am
Forum: Wireless Networking
Topic: Noise Factor
Replies: 2
Views: 918

Re: Noise Factor

Dear plisken,

I need to know the noise factor of the R52HN, the noise introduced.

Thanks!
by Fumi
Sat Feb 15, 2014 11:54 am
Forum: Wireless Networking
Topic: Noise Factor
Replies: 2
Views: 918

Noise Factor

Hello,

Everybody knows the noise factor of the mikrotik wireless devices?

Thanks
by Fumi
Thu Sep 05, 2013 10:07 pm
Forum: General
Topic: Record all connections
Replies: 1
Views: 461

Record all connections

Hello Mikrotik people!

I need help! How I can save all connections or web connections of my hotspot users. I need to save a log with connections of my users.

Any ideas?

Thanks
by Fumi
Tue Feb 05, 2013 11:56 am
Forum: General
Topic: Scheduler policy
Replies: 0
Views: 506

Scheduler policy

Hello Mikrotik people!

When I create a scheduler with user with full privilegies how I can make that user with only write privilegies can't delete script of user with full privilegies.

Thanks!
by Fumi
Wed Sep 05, 2012 1:53 pm
Forum: Beginner Basics
Topic: AP bridge
Replies: 3
Views: 982

Re: AP bridge

Hi, there is only a test laboratory: /interface bridge add l2mtu=1524 name=bridge1 /interface wireless set 0 band=2ghz-b/g/n frequency=2412 ht-rxchains=0,1 ht-txchains=0,1 mode=ap-bridge ssid=A wireless-protocol=802.11 /ip hotspot user profile set [ find default=yes ] idle-timeout=none keepalive-tim...
by Fumi
Wed Sep 05, 2012 1:51 pm
Forum: General
Topic: Bonding wireless MIMO
Replies: 0
Views: 288

Bonding wireless MIMO

Hello,

There is someone that can make wireless bonding between two radios in same routerboard with MIMO? I've tried everything and I can't make that work good for me.

Thanks
by Fumi
Wed Sep 05, 2012 1:48 pm
Forum: General
Topic: Hotspot login by https
Replies: 7
Views: 1787

Re: Hotspot login by https

It work for me! Thans for all!
by Fumi
Tue Aug 28, 2012 11:05 am
Forum: Beginner Basics
Topic: AP bridge
Replies: 3
Views: 982

Re: AP bridge

I make something wrong..?
by Fumi
Thu Aug 23, 2012 2:27 pm
Forum: Beginner Basics
Topic: AP bridge
Replies: 3
Views: 982

AP bridge

Hello, I have configured a wireless 2.4Ghz with bridge (ether1 and wlan1). The clients that connect to wlan can navigate fine and they can download files, all is fine! When I try to make iperf test between to laptots connected to AP via wireless the performance is very low and the conections to Inte...
by Fumi
Wed Aug 08, 2012 9:00 pm
Forum: General
Topic: Hotspot login by https
Replies: 7
Views: 1787

Re: Hotspot login by https

When my users before login to hotspot they connect to www.google.com and the login page apear.. but when they put https page like mail.google.com the login page not appear.
by Fumi
Wed Aug 08, 2012 1:29 pm
Forum: General
Topic: Hotspot login by https
Replies: 7
Views: 1787

Hotspot login by https

Hi Mikrotik people, when I try to access to login page by mail.google.com (HTTPS) explorer don't redirect me to login page! But If I try with normal page HTTP the explorer redirect me to login page of hotspot, then I login and I can access to mail.google.com HTTPS. How I can make to access first tim...
by Fumi
Tue Jul 03, 2012 11:55 am
Forum: General
Topic: Access winbox bonding slaves
Replies: 3
Views: 845

Re: Access winbox bonding slaves

I need to use VLAN to conect the master interface of bonding with slaves?
by Fumi
Mon Jul 02, 2012 5:05 pm
Forum: General
Topic: Access winbox bonding slaves
Replies: 3
Views: 845

Re: Access winbox bonding slaves

no ideas? :(
by Fumi
Mon Jul 02, 2012 2:22 pm
Forum: General
Topic: Access winbox bonding slaves
Replies: 3
Views: 845

Access winbox bonding slaves

Hi Mikrotik people, I have configured a bonding with 450G that bound two RB433AH with 2 wireless links. 450G has port ether2 and ether3 connecto to 2 RB433AH and this is configurated in a bondig interface and the ether2 and ether3 are slaves of bonding. How I can acces to RB433AH's slaves without di...
by Fumi
Thu Jun 21, 2012 1:18 pm
Forum: General
Topic: backup or export ?
Replies: 5
Views: 2477

Re: backup or export ?

You can use cloneTik of www.turbotik.com that allows you to copy all configurations or parts of configuration between different hardware.

Best regards
by Fumi
Thu Jun 21, 2012 1:08 pm
Forum: Beginner Basics
Topic: Simplest way to clone an RB750?
Replies: 12
Views: 3645

Re: Simplest way to clone an RB750?

I can offer you clonetik software of www.turbotik.com that can make copies of all configurations or only parts of configurations.
by Fumi
Thu May 31, 2012 5:26 pm
Forum: Wireless Networking
Topic: Link Budget Calculation
Replies: 3
Views: 2182

Re: Link Budget Calculation

I have a question about link budget calculations.. To calculate link budget 802.11n is the same formula that 802.11a? If we have 2 antenna or dual polarization the calculations are the same?
by Fumi
Thu May 10, 2012 1:04 pm
Forum: Wireless Networking
Topic: Only from 10 to 25Mbit/s per one connetcion in NV2
Replies: 9
Views: 1676

Re: Only from 10 to 25Mbit/s per one connetcion in NV2

There are news about this topic? I have the same problem with nv2 connections.
by Fumi
Wed May 09, 2012 7:23 pm
Forum: Wireless Networking
Topic: 180Mb TCP FDX with MIMO 3x3
Replies: 24
Views: 6153

Re: 180Mb TCP FDX with MIMO 3x3

Nice!!

What radio use? board? What kind of test use?

I do test with iperf half duplex TCP and I can reach 300mbps
by Fumi
Sat Jan 21, 2012 1:27 am
Forum: Wireless Networking
Topic: Aggregate power radio
Replies: 2
Views: 825

Re: Aggregate power radio

Sorry.. Only I write an example.. sorry for incorrect example..

The output power is 22+22=25 and there is de final output power.. I can reach distance with this radio like a radio with 1 chain and 25dBm??

Thanks inoX!!
by Fumi
Fri Jan 20, 2012 2:37 pm
Forum: Wireless Networking
Topic: Aggregate power radio
Replies: 2
Views: 825

Aggregate power radio

Hi Mikrotik people!

I have a question about power of MIMO radios.

When I see in datasheet 22dBm power and 24dBm (2chains) --> aggregate power.. this value how is calculate?

If I use two chain I can reach distance like a 24dBm radio no MIMO?

Thanks
by Fumi
Fri Nov 18, 2011 11:24 am
Forum: Wireless Networking
Topic: Request Link Planner Software
Replies: 9
Views: 2364

Re: Request Link Planner Software

You can use Wiplan for iPhone
by Fumi
Fri Jul 08, 2011 11:41 am
Forum: The User Manager
Topic: New Usermanager v5
Replies: 25
Views: 5090

Re: New Usermanager v5

Then If I put in AP dynamic Keys WPA2-PSK and aes.com I need to put WPA2 Pre-Shared Key. In client I need to configure WPA2 Pre-Shared Key. If I put PreShared Key in client and AP... The wireless settings in usermanager don't have utility no? Or the functionality is for Radius server to know the pre...
by Fumi
Fri Jul 08, 2011 11:28 am
Forum: The User Manager
Topic: New Usermanager v5
Replies: 25
Views: 5090

Re: New Usermanager v5

Thanks sergejs,

this type of configuration only work on client mikrotik devices?
On AP configuration --> http://wiki.mikrotik.com/wiki/User_Mana ... ss_Example --> in security profile I leave Mode: none?

I test this configuration and thanks
by Fumi
Fri Jul 08, 2011 11:19 am
Forum: The User Manager
Topic: New Usermanager v5
Replies: 25
Views: 5090

Re: New Usermanager v5

Can you post me a videotutorial o documentation how to use this settings? It's only I need!
by Fumi
Fri Jul 08, 2011 11:14 am
Forum: The User Manager
Topic: New Usermanager v5
Replies: 25
Views: 5090

Re: New Usermanager v5

It's so hard to put and example??
by Fumi
Fri Jul 08, 2011 11:13 am
Forum: The User Manager
Topic: New Usermanager v5
Replies: 25
Views: 5090

Re: New Usermanager v5

And normis I don't need this comments..

I say: The problem is I don't understand how to use this paramaters.
by Fumi
Fri Jul 08, 2011 11:08 am
Forum: The User Manager
Topic: New Usermanager v5
Replies: 25
Views: 5090

Re: New Usermanager v5

Ok but how can I use this parameters??? I set a user with a MAC? or I set user with username and password?? This parameters work with hotspot? Can I configure user demo with this parameters and the connection will be encrypted?? Or not work with hotspot? Only work with wireless? (no hotspot, no ppp,...
by Fumi
Thu Jul 07, 2011 7:15 pm
Forum: The User Manager
Topic: New Usermanager v5
Replies: 25
Views: 5090

Re: New Usermanager v5

I don't understand the function of parameters "preshared key" and "Enc algo". I set this parameters to user and nothing happen.. The problem is I don't understand how to use this paramaters.
Sorry :(
by Fumi
Thu Jul 07, 2011 12:13 pm
Forum: The User Manager
Topic: New Usermanager v5
Replies: 25
Views: 5090

Re: New Usermanager v5

This paramaeters
by Fumi
Wed Jul 06, 2011 11:23 am
Forum: The User Manager
Topic: New Usermanager v5
Replies: 25
Views: 5090

Re: New Usermanager v5

Anybody know about this?
by Fumi
Mon Jul 04, 2011 11:50 am
Forum: The User Manager
Topic: New Usermanager v5
Replies: 25
Views: 5090

Re: New Usermanager v5

Ok... but what is the function of wireless parameter in usermanager v5? wireless key?
If I configure security profile with dynamic keys wpa psk then I put a unique key.. I don't understand what is the function of parameters (wireless encryption) in usermanager v5
by Fumi
Fri Jul 01, 2011 2:14 pm
Forum: The User Manager
Topic: New Usermanager v5
Replies: 25
Views: 5090

Re: New Usermanager v5

anyone have any idea about it?
by Fumi
Thu Jun 30, 2011 2:39 pm
Forum: The User Manager
Topic: New Usermanager v5
Replies: 25
Views: 5090

Re: New Usermanager v5

I follow the steps in manual but if I don't active WEP or WPA in wireless security profiles, then the comunication is not encrypted. If in security profiles leave Mode: none (encryption) then RADIUS users can connect via wireless!! But if I set Mode: dinamyc keys then users cannot connect.. I need R...
by Fumi
Thu Jun 30, 2011 2:12 pm
Forum: The User Manager
Topic: New Usermanager v5
Replies: 25
Views: 5090

Re: New Usermanager v5

Thanks!! and sorry to put this message in wrong site..

Two last question..

Wireless clients should be Mikrotik? I try with laptop and log: got RADIUS accept for XX:XX:XX:XX:XX:XX on wlan1, but failed to validate encryption key.

UserManager support EAP authentication?

Thanks!
by Fumi
Thu Jun 30, 2011 11:29 am
Forum: The User Manager
Topic: New Usermanager v5
Replies: 25
Views: 5090

Re: New Usermanager v5

sorry...

There is any example or something to configure wireless section?
by Fumi
Thu Jun 30, 2011 11:18 am
Forum: The User Manager
Topic: New Usermanager v5
Replies: 25
Views: 5090

Re: New Usermanager v5

Please mikrotik guys! I need some help! :?
by Fumi
Wed Jun 29, 2011 8:23 pm
Forum: The User Manager
Topic: New Usermanager v5
Replies: 25
Views: 5090

New Usermanager v5

Hi all!

I need to configure usermanager and I have some questions.

There is manual for new usermanager?

I need to know how configure user--> wireless

Wireless->
Preshared key:
Enc key:
Enc algo:


What is the configuration in usermanager GUI and winbox?

Thanks..
by Fumi
Fri Apr 08, 2011 1:16 pm
Forum: General
Topic: RouterOS 5.0 is out!
Replies: 153
Views: 27419

Re: RouterOS 5.0 is out!

Problem with API in 5.0??

/interface/monitor-traffic
?interface=ether1
=once=


result:
!re=rx-packets-per-second=49=rx-drops-per-second=0=rx-errors-per-second=0=tx-packets-per-second=56=tx-drops-per-second=0=tx-errors-per-second=0

where is tx/rx bites/s ??
by Fumi
Sun Jan 09, 2011 10:22 pm
Forum: Wireless Networking
Topic: Transmit with 2 R52nm
Replies: 7
Views: 1375

Re: Transmit with 2 R52nm

I try to down tx power to minium value, then the consumption for each radio is lower.. But the problem persists.

There is a way to make double link simultaneous?

Thanks for all!
by Fumi
Mon Jan 03, 2011 11:05 am
Forum: Wireless Networking
Topic: Transmit with 2 R52nm
Replies: 7
Views: 1375

Re: Transmit with 2 R52nm

I try with same cables and same distance but with separate routerboards:

RB1 (1Radio)<-------------> RB2 (1Radio)
RB3 (1Radio)<-------------> RB4 (1Radio)

In this situation there is no problem, but the problem is when I use 1 RB with 2 radios.
by Fumi
Fri Dec 31, 2010 2:42 pm
Forum: Wireless Networking
Topic: Transmit with 2 R52nm
Replies: 7
Views: 1375

Re: Transmit with 2 R52nm

I have POE Gigabit 40W I think power its not the problem
by Fumi
Fri Dec 31, 2010 1:08 pm
Forum: Wireless Networking
Topic: Transmit with 2 R52nm
Replies: 7
Views: 1375

Re: Transmit with 2 R52nm

I have make more test and I can say that 2 radios transmit simultaneous can be work in 5Ghz-onlyN. There is no problem with interference. I test with separate boards and it's work but when I put two radios in same board it fail... :(
by Fumi
Thu Dec 30, 2010 7:27 pm
Forum: Wireless Networking
Topic: Transmit with 2 R52nm
Replies: 7
Views: 1375

Transmit with 2 R52nm

I try to transmit simultaneuos with 2 R52NM and performance is low.. 1.- Only transmit wlan1<--->wlan1 bandwidth test UDP:220Mbps 2.- Only transmit wlan2<--->wlan2 bandwidth test UDP:220Mbps 3.- Transmit simultaneous wlan1 and wlan2 ant bandwidth test is slow.. 120 Mbps for radio. I try to down tx p...
by Fumi
Tue Nov 23, 2010 6:53 pm
Forum: Wireless Networking
Topic: Wireless Link Planning: How do you do it
Replies: 8
Views: 1473

Re: Wireless Link Planning: How do you do it

To antenna alignment try WiPlan for iPhone, is useful:
http://itunes.apple.com/es/app/wiplan/id368489109?mt=8
by Fumi
Mon Sep 27, 2010 12:49 pm
Forum: Forwarding Protocols
Topic: how can i configure MPLS twice?
Replies: 20
Views: 4092

Re: how can i configure MPLS twice?

This configuration with vpls-BGP add overhead and not work good...

I run simultaneous 2 BWtest wlan1 and wlan2 and obtain 180Mbps for each radio (UDP)

When I run BWtest bonding only can obtain 44Mbps...
by Fumi
Tue Sep 21, 2010 12:46 pm
Forum: Forwarding Protocols
Topic: how can i configure MPLS twice?
Replies: 20
Views: 4092

Re: how can i configure MPLS twice?

Good example on wiki!!

I have problem to add BGP instances!!

"Couldn't add New BGP Instance - instance with this RouterId already configured (6))"
by Fumi
Mon Sep 20, 2010 11:59 am
Forum: Forwarding Protocols
Topic: how can i configure MPLS twice?
Replies: 20
Views: 4092

Re: how can i configure MPLS twice?

No reply? I try this configuration many many times and no results for me.. Please help! If this work is important!
by Fumi
Wed Sep 15, 2010 1:26 pm
Forum: Forwarding Protocols
Topic: how can i configure MPLS twice?
Replies: 20
Views: 4092

Re: how can i configure MPLS twice?

I don't know what are you doing blake but this configuration not work for me.. only one VPLS interface is running...
vpls.png
Can you post entire configuration? or post .rcs file or screens?

Thanks
by Fumi
Tue Sep 14, 2010 12:53 pm
Forum: Forwarding Protocols
Topic: how can i configure MPLS twice?
Replies: 20
Views: 4092

Re: how can i configure MPLS twice?

This configuration is working?? Yes I have two interfaces (wlan1 and wlan2 enabled on mpls interface and /30 each interface..)

Can you post configuration? firmware version? I try this with 802.11n radios and I want to make twice VPLS and bonding...
by Fumi
Tue Sep 14, 2010 11:16 am
Forum: Forwarding Protocols
Topic: how can i configure MPLS twice?
Replies: 20
Views: 4092

Re: how can i configure MPLS twice?

This configuration not work! Only one VPLS is running...
by Fumi
Wed Sep 08, 2010 11:16 am
Forum: Wireless Networking
Topic: Please help with 2 VPLS!!
Replies: 2
Views: 643

Re: Please help with 2 VPLS!!

Thanks angboontiong!

But I need with 2 wlans..


wlan1 (VPLS1)<-----> (VPLS1) wlan1

wlan2 (VPLS2)<-----> (VPLS2) wlan2
by Fumi
Tue Sep 07, 2010 10:07 pm
Forum: Wireless Networking
Topic: Please help with 2 VPLS!!
Replies: 2
Views: 643

Please help with 2 VPLS!!

Hello Mikrotik guys! I need some help with configuration 2 VPLS (each VPLS for wlans..) I have 2 wlans (wlan1, wlan2) and I want to create 2 VPLS but only one VPLS is running.. I read in other post: http://forum.mikrotik.com/viewtopic.php?f=14&t=40219 "config set only lsr-id , dont set transport-add...
by Fumi
Thu Aug 26, 2010 2:10 pm
Forum: Wireless Networking
Topic: 802.11n 2 radios each point.
Replies: 5
Views: 1137

Re: 802.11n 2 radios each point.

I try all and always reproduce the problem.. I don't know if it's my problem. :(
by Fumi
Thu Aug 26, 2010 12:28 pm
Forum: Wireless Networking
Topic: 802.11n 2 radios each point.
Replies: 5
Views: 1137

Re: 802.11n 2 radios each point.

2 separated miniPCI.

No one has detected the problem? I try with diferents radios, r52n, srt71, compex, etc...
by Fumi
Thu Aug 26, 2010 11:16 am
Forum: Wireless Networking
Topic: 802.11n 2 radios each point.
Replies: 5
Views: 1137

Re: 802.11n 2 radios each point.

This is a bug? problem with radio MIMO controllers?
by Fumi
Wed Aug 25, 2010 8:24 pm
Forum: Wireless Networking
Topic: 802.11n 2 radios each point.
Replies: 5
Views: 1137

802.11n 2 radios each point.

I test this situation:

2 boards x86 1.6Ghz with 2 sr71 (5Ghz) each board.

When try 1 link with wlan1<-->wlan1 I can reach 130 Mbps TCP!! But when I start bandwidth test with wlan2<--->wlan2 same time, then two links low to 20Mbps..

Link wlan1 : 5180 Mhz
Link wlan2 : 5800 Mhz
by Fumi
Wed Aug 04, 2010 12:46 pm
Forum: Forwarding Protocols
Topic: 2x parallel vpls tunnel in the same time
Replies: 15
Views: 4817

Re: 2x parallel vpls tunnel in the same time

I tried this configuration several times and I have not worked!!
I think the bonding can not work with VPLS...

Someone work this type of configuration?
by Fumi
Tue May 11, 2010 4:57 pm
Forum: RouterBOARD hardware
Topic: LINK P-P 12Km. NLOS with 133c
Replies: 48
Views: 8813

Re: LINK P-P 12Km. NLOS with 133c

This tools help you to check link aviability for iphone

WiPlan: Align antennas && Topograhpic profile
http://itunes.apple.com/es/artist/turbo ... d351879760

WiCalc: Wireless calculator
http://itunes.apple.com/es/app/wicalc/id351879757?mt=8
by Fumi
Tue May 11, 2010 1:58 pm
Forum: Wireless Networking
Topic: is this link possible?
Replies: 7
Views: 1006

Re: is this link possible?

Use this tools to check link aviability for iphone

WiPlan: Align antennas && Topograhpic profile
http://itunes.apple.com/es/artist/turbo ... d351879760

WiCalc: Wireless calculator
http://itunes.apple.com/es/app/wicalc/id351879757?mt=8
by Fumi
Wed May 05, 2010 11:03 am
Forum: Wireless Networking
Topic: Wrong TX-power values.
Replies: 19
Views: 3649

Re: Wrong TX-power values.

Thanks for replies!

SR71-15 is 27dBm radio. In routerOS 5beta2 realTX Power=19dBm and TotalTXPowe=22dBm (6Mbps rate).
I know the best way is leave default settings but If I need to configrue to manual settings what is the good value for rate=6Mbps?Can I set to 27dBm to 6Mbps datarate?

Thanks!
by Fumi
Tue May 04, 2010 11:48 am
Forum: Wireless Networking
Topic: Wrong TX-power values.
Replies: 19
Views: 3649

Wrong TX-power values.

There are several radios that RouterOS does not read well the TX-power value. RouterOS does not know the offset of all radios on the market. If I have 25dBm radio but routerOS read max power 17dBm. The offset is 8dBm. The question is.. I set TX-power mode=manual and if I configure for rate 6Mbps=25d...
by Fumi
Mon Mar 15, 2010 3:00 pm
Forum: Wireless Networking
Topic: is this link possible?
Replies: 7
Views: 1006

Re: is this link possible?

Be careful with fresnel zone + earth corbeture. I think you need more altitude in point B.
by Fumi
Fri Feb 05, 2010 10:32 pm
Forum: Wireless Networking
Topic: SR71-A three chians
Replies: 0
Views: 429

SR71-A three chians

Somebody has test SR71-A radio of Ubiquity?
Can I use three chains? In a point-point theorically I can reach 450Mbps with 3 chains in 40Mhz..
This is can possible with MCS23. This freature is implemented?

Thanks!
by Fumi
Mon Feb 01, 2010 11:06 am
Forum: Wireless Networking
Topic: Wireless Link with iphone WiCalc
Replies: 3
Views: 703

Re: Wireless Link with iphone WiCalc

I try this configuration and this is some results:

signal strength: -71
CCQ: -80/-79

But my first calculation with iphone Wicalc (wireless calculator) I can reach a signal strength of -60 but I image that this value is theorical.

Thanks and I will post new result
by Fumi
Sat Jan 30, 2010 12:19 pm
Forum: Wireless Networking
Topic: Wireless Link with iphone WiCalc
Replies: 3
Views: 703

Wireless Link with iphone WiCalc

Hi! I have two RB433 and two XR5. I need to create a link over 100Km. I have two parabolics 32dBi. I have clear view between two points. band: 5ghz For my first rapiddly calculations I use application for iphone, WiCalc. This is a simple application but this help me to make calculations so fast and ...
by Fumi
Tue Dec 22, 2009 11:04 am
Forum: Wireless Networking
Topic: a question (when we have two radio)
Replies: 2
Views: 415

Re: a question (when we have two radio)

When radio is disabled consumption falls to zero or near zero. I made test with powermeter.

Regards
by Fumi
Fri Oct 16, 2009 11:10 am
Forum: Wireless Networking
Topic: Dual polarization antennas or two antennas in one unit
Replies: 75
Views: 43989

Re: Dual polarization antennas or two antennas in one unit

I have link with two MIMO r52N each point. I need to create nstreme dual link. For this link I have two multipolarized antennas.What is the best option? Connect 1 radio in multipolarized antenna (each chain with one polarition) or connect each chain of 1 radio in diferents multipolarized antenna? Th...
by Fumi
Fri Sep 25, 2009 2:58 pm
Forum: Wireless Networking
Topic: 802.11n
Replies: 939
Views: 289578

Re: 802.11n

Hello,

I test bonding with two R52N each side but bonding not work.. Bonding of wireless N do not work yet?
by Fumi
Tue Sep 22, 2009 5:11 pm
Forum: General
Topic: 3 radio miniPCI in bonding
Replies: 0
Views: 303

3 radio miniPCI in bonding

Hi, I have x86 Atom architecture and 3 miniPCI atheros. I have 3 links in nstreme for each miniPCI. I put three links in bonding with balance-rr mode. Results: Bandwidth test UDP: 230 Mbps, CPU=15% 20% Bandwidth test TCP:90 Mbps, CPU=50% When I make bonding with two links I have same results in band...
by Fumi
Thu Sep 03, 2009 8:27 pm
Forum: Wireless Networking
Topic: 802.11n
Replies: 939
Views: 289578

Re: 802.11n

Hello Tikpeople!

Any know what is AMPDU Priorities? AMPDU is agreggation of mac protocol data units. What is priorities in AMPDU? What configure?
Thanks all
by Fumi
Thu Jun 25, 2009 10:53 am
Forum: General
Topic: Access to bonded routerboards
Replies: 0
Views: 287

Access to bonded routerboards

Hi TikPeople! I have bonded two routerboards: --------- RB433AH | eth2 | RB1000---- | eth3 | --------- RB433AH bonding interface: slaves=eth2,eth3 mode=balance-rr From RB1000 I can't access to RB433AH (telnet,mac-telnet,etc..) If I disable bonding I can access to RB433AH but I need to access RB433AH...
by Fumi
Mon May 18, 2009 9:12 pm
Forum: General
Topic: 3G USB Cards
Replies: 3
Views: 3444

Re: 3G USB Cards

Hi,

In v3.23 and RB433UAH only work 3g USB devices? not work miniPCI-Express devices?
Arch x86 it work with miniPCI-Express devices but not in MIPSBE devices then I can't use RB433AH with miniPCI to miniPCI-Express.

Thanks Mikrotik
by Fumi
Fri May 15, 2009 2:26 pm
Forum: General
Topic: API command
Replies: 0
Views: 305

API command

Hi Tikpeople When I execute API command "/interface/wireless/registration-table/print" Values of mac-address and radio-name are values of local wlan and not of remote wlan.. in winbox this values are of remote wlan. RB1 (wlan1 00:00:00:00:00:01)<----->RB2 (wlan1 00:00:00:00:00:02) I ask to RB1 (API)...
by Fumi
Thu May 07, 2009 3:05 pm
Forum: General
Topic: API on v3.23
Replies: 17
Views: 2414

Re: API on v3.23

Yeah, I think in this option..
I think option to read N entires of command would be better...
by Fumi
Thu May 07, 2009 11:08 am
Forum: General
Topic: API on v3.23
Replies: 17
Views: 2414

Re: API on v3.23

I don't know.. 128K 256K... but read 500, 1000 lines of log is not more efficient...
by Fumi
Wed May 06, 2009 7:59 pm
Forum: General
Topic: API on v3.23
Replies: 17
Views: 2414

Re: API on v3.23

A user connects to the router from home. The router is in another site. The program read log entries of router. If program reads all the entries in the log, user should wait too long time. If the program could read ten lines first and next read ten follow lines I think that option will be better... ...
by Fumi
Wed May 06, 2009 11:07 am
Forum: General
Topic: API on v3.23
Replies: 17
Views: 2414

Re: API on v3.23

I need only read a few lines because if I read all lines (400) i need wait time because my application work in remote mode...
If I can read first 10 lines and after folow 10 lines..

Thanks
by Fumi
Tue May 05, 2009 7:11 pm
Forum: General
Topic: API on v3.23
Replies: 17
Views: 2414

Re: API on v3.23

How I can print N first lines of log?

/log/print
????

Thanks
by Fumi
Mon Apr 27, 2009 11:10 am
Forum: General
Topic: 3.22 x86 ssh bug?
Replies: 11
Views: 1472

Re: 3.22 x86 ssh bug?

Ssh bug (x86 arch) still in v3.23.

Any news?

Thanks
by Fumi
Mon Apr 27, 2009 11:03 am
Forum: General
Topic: API on v3.23
Replies: 17
Views: 2414

Re: API on v3.23

Thanks janisk for aclaration!
We will be wait for API news!
by Fumi
Fri Apr 24, 2009 11:04 am
Forum: General
Topic: API on v3.23
Replies: 17
Views: 2414

Re: API on v3.23

Hi!

/interface/monitor-traffic
=interface=ether2
=once=

it's work!

Thanks
by Fumi
Thu Apr 23, 2009 8:19 pm
Forum: General
Topic: API on v3.23
Replies: 17
Views: 2414

API on v3.23

Hi TikPeople!

How can make traffic monitor to specific interface with API commands?

/interface monitor-traffic ether2

in API??

/interface/monitor-traffic
?name=ether2
=once=

This not work.. This command make monitor traffic of interface ether1.


Thanks!
by Fumi
Fri Apr 03, 2009 11:56 am
Forum: General
Topic: 3.22 x86 ssh bug?
Replies: 11
Views: 1472

Re: 3.22 x86 ssh bug?

Yes it's difficult to remember the password but it's my client requeriment... :shock:

But this is a bug and I think it's a error in privileges control. With ftp privilege disabled then works perfect.

Normis, to report other critical error, which mail I have to write?

Sorry for my english...
by Fumi
Wed Apr 01, 2009 12:20 pm
Forum: General
Topic: 3.22 x86 ssh bug?
Replies: 11
Views: 1472

Re: 3.22 x86 ssh bug?

Sure! that's more secure!! :D but only I need large passwords

Thanks
by Fumi
Wed Apr 01, 2009 11:49 am
Forum: General
Topic: 3.22 x86 ssh bug?
Replies: 11
Views: 1472

Re: 3.22 x86 ssh bug?

For security reasons. It's a client requeriment.

Thanks a lot!
by Fumi
Wed Apr 01, 2009 11:28 am
Forum: General
Topic: 3.22 x86 ssh bug?
Replies: 11
Views: 1472

Re: 3.22 x86 ssh bug?

Anyone else have the same problem?
It's strange... :shock:
by Fumi
Mon Mar 30, 2009 12:08 pm
Forum: General
Topic: 3.22 x86 ssh bug?
Replies: 11
Views: 1472

3.22 x86 ssh bug?

Hi Tikpeople! I try ssh login with user password length >= 32 chars and don't work! (x86 arch) Is a bug? ----- If I disable ftp privilege from group user this bug not occur, only if privilege ftp is enabled. :shock: With wrong password returns me: admin@192.168.1.1's password: Permission denied, ple...
by Fumi
Fri Mar 13, 2009 7:53 pm
Forum: Beginner Basics
Topic: Equal bandwidth PCQ?¿
Replies: 2
Views: 835

Equal bandwidth PCQ?¿

Hi Tik people!!

How I can make Equal Bandwidth for a Number of Users withot known my ISP bandwidth?
I have a critical connection (3mbps or 2mbps or less) and I need to distribute my bandwidth in all moment, dinamically!

Thanks!
by Fumi
Wed Feb 25, 2009 3:03 pm
Forum: General
Topic: Drivers 3g cards miniPCI Express
Replies: 0
Views: 256

Drivers 3g cards miniPCI Express

Hi,

Are included drivers for 3g cards miniPCI-Express (in supported hardware list in wiki) for MIPSBE arch?

Thanks
by Fumi
Tue Jan 27, 2009 8:23 pm
Forum: RouterBOARD hardware
Topic: Driver for 3G Mini PCI Express
Replies: 9
Views: 2688

Re: Driver for 3G Mini PCI Express

Hello,

what is "web" APN? It works with ALIX?
by Fumi
Tue Jan 13, 2009 10:29 pm
Forum: General
Topic: bonding in lobometrics.
Replies: 13
Views: 1922

Re: bonding in lobometrics.

Contact with lobometrics or 34T technical support, they will help you to configure bonding and reach best results. :D
by Fumi
Mon Jan 12, 2009 11:37 pm
Forum: General
Topic: bonding in lobometrics.
Replies: 13
Views: 1922

Re: bonding in lobometrics.

Can reach 150/160 Mbps with 968T with bonding two wireless, is not difficult. signal strength -60 and noise -98
With nstreme2 obtain 70/75 Mbps one path x2 = 140/150 Mbps.
by Fumi
Fri Oct 06, 2006 10:25 pm
Forum: Scripting
Topic: Problems with script
Replies: 2
Views: 1098

yeah :D ,it's also giving me error without the print command :? , i belive that the problem is command find, it doesn't let me use [find] on a script And if i write system script add name=ap source="/ip address print /ip address set 0 address=192.168.1.155/24" OS accept this sript, but when i run th...