Add DNS over HTTPS (DoH) client to RouterOS. This will significantly improve the privacy of network users and devices (especially when RouterOS device serves as DNS cache/recursive resolver). https://developers.google.com/speed/public-dns/docs/dns-over-https https://developers.cloudflare.com/1.1.1.1...

Client decides these things, but if you want to FORCE something else, you can use the Access List settings and set required signal levels etc. We are in the networking business, not in desktop/phone business. When I get an order for a WiFi deployment, I cannot blame Apple, no client in the world wi...

The Capsman is not perfect. It will not "perfectly" handover or handover the clients. It is the decision of the CLIENT to go to another AP or not. You "can" do some tweaks, like kicking weak clients form an AP and then the client will search for a better one (especially Apple de...

While the cost is much higher you could make your own Mikrotik router with AC wifi.

I know. But I'm a Network engineer who's looking to operate 50+ of these with minimal effort/cost, not an electronics hobbyist. I really need a one-in-all plug-n-play solution to keep maintenance overhead low.

hAP AC when??

+1

This is THE most anticipated piece of MikroTik equipment this year, but there is 0 information about when is it coming. It was announced for Q3 2015?

Could not add VirtualAP via winbox on my RB751G-2HnD, "L2 MTU" field is empty and grey (read only) so i get error message: "Couldn't add New Interface - l2mtu wrong (6)". It is only possible to add interface via terminal. I tried with winbox 2.2.18 and 3.0rc12. On my second rout...

I have constant problems with certificates when running CAPsMAN and CAP on the same router. Whenever I do a fresh configuration, issue new CA & certificates and join local CAP to CAPsMAN on the same router, things work fine. However, after reboot of the router, I am starting to get certificate e...

I use L2 through VLAN 10. It does seem to me your CAP -> CAPsMAN link is OK, as you have both dynamic wlan interfaces provisioned and bridged on CAP, and that is done by CAPsMAN.

We do seem to have identical configuration: /caps-man datapath> print 0 name="local-vlan10" local-forwarding=yes vlan-mode=use-tag vlan-id=10 1 name="local-vlan20" local-forwarding=yes vlan-mode=use-tag vlan-id=20 /interface> print Flags: D - dynamic, X - disabled, R - running, S...

Yes, it should work, I have identical setup working - 2 routers, 3 VLANs, 3 SSIDs, trunk in between the routers and CAPsMAN 2. Can you paste or send me your configuration output on PM?

When you look at your bridge member ports, are both physical and virtual WLAN interfaces present?

Step 1: Set up the VLANs & DHCP server Both router and switch have switch port groups with master port set to eth2: /interface ethernet set eth3 master-port=eth2 set eth4 master-port=eth2 set eth5 master-port=eth2 Both router and switch have eth2, eth3 and eth4 set as access ports with their re...

I work with Cisco network equipment for a couple of years now to earn my daily bread and I've recently decided to give Mikrotik a spin in my home network. I bought 2 RB951G-2HnD to cover my flat with WiFi and provide gigabit connectivity for all devices, set up CAPsMAN, VPN, QoS and all that. It was...