Community discussions

MUM Europe 2020

Search found 6 matches

by tomassp
Tue Feb 23, 2016 3:55 pm
Forum: Beginner Basics
Topic: Use WAN IP on LAN
Replies: 2
Views: 638

Use WAN IP on LAN

Hi! I'm using RB850Gx2 (powerpc) with 6.34.2 installed. There is no any specific configuration, just DHCP, some NAT rules for port forwarding and some reserved IP addresses by MAC address. What I want is allow use WAN IP addresses in LAN. For example - one NAS drive with IP address 10.0.0.39, I can ...
by tomassp
Thu Mar 12, 2015 3:44 pm
Forum: Beginner Basics
Topic: Mikrotik router as Wireless access-point
Replies: 9
Views: 17486

Re: Mikrotik router as Wireless access-point

No, WMM support is disabled by default.
by tomassp
Wed Mar 11, 2015 5:16 pm
Forum: Beginner Basics
Topic: Mikrotik router as Wireless access-point
Replies: 9
Views: 17486

Re: Mikrotik router as Wireless access-point

There is what I was configured and changed - 1. Wireless/Interfaces -> wifi - Mode: ap bridge ; Band: 2GHz-only-N (also tried BGN) ; Channel Width: 20/40MHz HT Above (also tried Below and only 20MHz) ; Frequency: current 2422 (was tried others (scanned for most unused in air)) ; Wireless Profile: an...
by tomassp
Wed Mar 11, 2015 1:22 pm
Forum: Beginner Basics
Topic: Mikrotik router as Wireless access-point
Replies: 9
Views: 17486

Re: Mikrotik router as Wireless access-point

Thanks again for help, but there is now another problem. I was wondering that with Mikrotik router speed is slowest than with my old TP-Link router. Lower speed is not only in network but also in LAN. When I try copying something from my NAS to my computer via TP-Link, average speed is 6 MB/s, but w...
by tomassp
Thu Mar 05, 2015 4:28 pm
Forum: Beginner Basics
Topic: Mikrotik router as Wireless access-point
Replies: 9
Views: 17486

Re: Mikrotik router as Wireless access-point

You are god. This works. Thanks! :)
by tomassp
Tue Mar 03, 2015 11:30 am
Forum: Beginner Basics
Topic: Mikrotik router as Wireless access-point
Replies: 9
Views: 17486

Mikrotik router as Wireless access-point

Hi. I'm beginner and this is first time I configuring Mikrotik router so please be lovely. To configure other home-based routers as access-points, I just set SSID, password, disable DHCP and connect LAN cable from source to routers first LAN port not WAN. And all works fine, router is giving IP addr...