MikroTik

lectrapon

Hi, I have upgrade from 6.34.6 to 6.37.5 my RB951G-2HnD. I have disabled wireless-fp package before restart and upgrade RouterOS. I have one wireless package and it was already activated (I think that installation is fine!) But When I activate wireless...few second later I got this log message for e...

lectrapon

Hi normis, I have upgrade from 6.34.6 to 6.37.5 my RB951G-2HnD. I have disabled wireless-fp package before restart and upgrade RouterOS. I have one wireless package and it was already activated (I think that installation is fine!) But When I activate wireless...few second later I got this log messag...

lectrapon

lectrapon - This topic is about 6.36.4 version. Upgrade from previous version does not require any packages being disabled. We suggest to read whole chain of changelogs between version from which you are upgrading your device until version which you are installing. This concrete note was added in 6...

lectrapon

Nothing good under tropics

Envoyé de mon C6802 en utilisant Tapatalk

lectrapon

pomah - From which version did you upgrade? If you did use older version than 6.36 and had wireless-fp before, then this should be the reason: *) wireless - wireless-fp is discontinued, it needs to be uninstalled/disabled before upgrade; If you had answered my previous post http://forum.mikrotik.co...

lectrapon

Hello,
Can someone tell me if there are something to disable before upgrade this bugfix ?
I had saw (but I don't know where) that wireless package will be changed or something like that.

lectrapon

Hello Mikrotik users, I have set a Wireless WDS Mesh with 03 Access Points (AP1, AP2 and AP3). And now I need to give internet access to AP2 and AP3 without to disable the hotspot feature for wireless clients. I have always add routers IP and MAC address in Hotspot IP binding of AP1 router. But I ca...

lectrapon

... the second problem: i want authorization client alive To solve this problem you can stick "MAC COOKIE" of Login Tab in Hotspot Server Profile. mac cookies.png hi lectrapon. well i have 11 AP and two switches i made hotspot server bridge mode under ether6 , i made 11 vlans for access p...

lectrapon

im using mikrotik rb951g v6 any one can help me pls..

Hello Javar008,
I think you might try commands bloc by bloc (copy and paste each command line) in your routerboard terminal to find what's wrong

lectrapon

I just have the default rules. I ran this command. /ip firewall filter add action=accept chain=input disabled=no dst-port=8291 protocol=tcp That created a NAT srcnat using port 8291 TCP, nothing in "filter rules". Use this command... /ip firewall filter add action=accept chain=input disab...

lectrapon

Replying to an oldish thread here with hopes... did you manage to get it right or is there anyone who knows how to do this ?

Thanks

nothing planned...

lectrapon

My script won't work after upgrade to 6.34.6... :global offset :global today { :local date [ /system clock get date ] :local montharray ( "jan","feb","mar","apr","may","jun","jul","aug","sep","oct&...

lectrapon

My script won't work after upgrade to 6.34.6... :global offset :global today { :local date [ /system clock get date ] :local montharray ( "jan","feb","mar","apr","may","jun","jul","aug","sep","oct&q...

lectrapon

hi all, is there any one can help me in this settings and tell me if they are OK, or tell me what is the correct settings ? idle timeout keepalive timeout lease time Hello Hi4ibb, Can you tell us what wrong when your server is online ? And you select BRIDGE in INTERFACE but we can't see components ...

lectrapon

Can you copy out from the console such values for each case when the iphone 3gs works and doesn't work and for iphone4+ which works: supported-rates-b supported-rates-a/g basic-rates-b basic-rates-a/g ht-supported-mcs ht-basic-mcs Hello uldis , can you help me....how to copy out from the console su...

lectrapon

I have tried this method but no improvement can you please write complete status page or explain me in detail. thanks in advance <html> <head> <script language="JavaScript"> <!-- var tl; tl = $(limit-bytes-total) - $(bytes-total); function readablizeBytes(bytes) { //French values of data ...

lectrapon

Hello

++1 for this feature

lectrapon

Hello,
hope that the next stable release give us this Facebook Wifi feature

lectrapon

Try this in the head tag of your status html : <script language="JavaScript"> <!-- var tl; tl = $(limit-bytes-total) - $(bytes-total); function readablizeBytes(bytes) { var s = ['octets', 'ko', 'Mo', 'Go', 'To', 'Po']; var e = Math.floor(Math.log(bytes)/Math.log(1024)); return (bytes/Math....

lectrapon

:global address :global usage :global count 0 /queue simple remove [find] :log warning "====================================Run From Schedule====================================" ; :foreach user in=[/ip hotspot active find ] do={ :set $count ($count + 1); :set $usage [/ip hotspot active g...

lectrapon

I scan the change logs of news "Release Candidate" with hope anytime ...

lectrapon

Hello Mikrotik Administrators , We need your advise to show Started Date and Expiry Date in Hotspot Status Page. But your Wiki about List of available variables http://wiki.mikrotik.com/wiki/Manual:Customizing_Hotspot#List_of_available_variables don't list variables that we can use. can you advise a...

lectrapon

http://wiki.mikrotik.com/wiki/Manual:Customizing_Hotspot#List_of_available_variables See above link for hotspot variables. You are going to want to use combinations of session-time-left and uptime to calculate there times. Hello alphahawk , can you explain your idea (guideline)...because I have try...

lectrapon

Hello
This is useful for us...thanks !

lectrapon

See this manual page . We have read manual page but...unfortunately these variables can't help us ( :shock: ...newbies). We want to show HOTSPOT EXPIRE DATE in status page. Can you guide us to export LOGIN SCRIPT variables in status html page ? Here is ON LOGIN script code for adding user comment t...

lectrapon

Hello,

can someone help us to find all variables (like $username, $limite-bytes-out...) that we can insert in hotspot html page ?

lectrapon

Unfortunately nobody has found something concrete to share here...

I am searching on Goo

Envoyé de mon GT-I9190 en utilisant Tapatalk

lectrapon

Hello! Do we have a solution using facebook like to login? Are they free or paid options? I'm interested and wanted to have more info. Thank's :) We can provide that solution but we don't reccomend it, because the second time that the client login there is already the like. I think that the useful ...

lectrapon

Someone from US and UK is failing to login to your device via SSH and Telnet :D If you do not need ssh and telnet then go to services and disable ssh and telnet: /ip service set telnet disabled=yes set ssh disabled=yes If you need it then setup firewall rules to accept login from known adress list ...

lectrapon

Hello Mikrotik Team,

I have another red log alert:

2015-12-13_10-04-07.jpg

I have noticed that this is only "...via telnet" error message

lectrapon

Hello I use a BaseBox 2 in WDS link with a QRT2. Both run on routerOS 6.32.3 bugfix. I configure a virtual AP on each routerboard on which roaming users are connected. BaseBox2 is the Hotspot server (DHCP). All goes right with setting. But today I have got a system error critical message " logi...

lectrapon

Hello, the PDF and the ZIP are ok, try to open it with Adobe Reader.

Hello pas,

I receive "error 404" message with the link " http://troccolielectric.com/network-services.zip ".

I want to integrate facebook connect with my Hotspot Login. Can you post another links ?

lectrapon

I made another functioning script... 8) variables: TIME= delay before login AP = Virtual Access Point on which roaming users are connected Here are my script: :foreach i in ( [ /interface wireless registration-table find where uptime > "TIME" and interface ="AP" ] ) do={ :if ( [ ...

lectrapon

Hello, I was using this script for disconnect unauthorized hotspot user after 30min connection :foreach i in ( [ /interface wireless registration-table find where uptime > 1800 ] ) do={ :local detail [ /interface wireless registration-table get $i comment ] :local mac [ /interface wireless registrat...

lectrapon

Well. But you are missing the wds links between the devices... Hello JARDA . I have tried all night long to do my best and I have found how to set up WDS using MikroTik (with google and mikrotik forum 8) ). Here is RB951G (AP1) configuration with WDS link : RB951G_config.jpg # jan/02/1970 00:27:19 ...

lectrapon

sorry to take long time before posting. I reset all router for being sure about what I done (newbie work

)

Here is what I settled in QRT 2 configuration :

QRT2.jpg

config_QRT2.rsc

Here is what I settled in RB951G configuration :

RB951G.jpg

config_RB951G.rsc

lectrapon

OK, give me a moment for printing screen and exporting of my configuration.

Envoyé de mon GT-I9190 en utilisant Tapatalk

lectrapon

You want to see my configuration ?

Envoyé de mon GT-I9190 en utilisant Tapatalk

lectrapon

... But it is theoretically possible so if you have plenty of time for playing, let's start to play... OK, I am ready to try this setting according your guideline. ...Just avoid the mesh and use static wds links. I have set 'WDS mode' in wireless configuration to 'static' and leave other values def...

lectrapon

Thanks for your support JARDA 8) According your answer, this is possible (and this make me happy :D ). For 5g devices I will buy it next year (unless santa christmas help me before :lol: ). For start up, I will focus on laptops clients to avoid some problems you listed...eg weak signal. Just think a...

lectrapon

It's better to make topology according to local placement conditions. Use static wds links between the devices like wires and virtual APs for client's connection. But remember. Run wires rather everywhere even if you think you can't. Hello JARDA , I have attached panoramic image in default of topol...

lectrapon

Hello, I have one QRT 2, one BaseBox 2 and one RB751U-2HnD. I want to build a Wireless WDS Mesh With Mesh Interface like this picture : http://wiki.mikrotik.com/images/3/37/Fmesh.jpg My internet is connected to BaseBox 2. someone have already done this setting ? http://wiki.mikrotik.com/wiki/Wireles...

lectrapon

too few info about the project to provide accurate suggestions i think we need to know at least this: which kind of devices are your clients?? how many clients?? how many bandwidth allowed per client?? how many total bandwidth?? how many square meters is the area to serve?? what kind of environment...

lectrapon

This is only a routerboard. You can use BaseBox2 with omni antenna or this one: http://routerboard.com/RBwAP2nD QRT doesn't seem to be a good idea to me for hotspot Ok, I will try Basebox2 with 2 dipole antennas of 5dBi ? Can you tell me the wireless coverage ? in line of sight, I mean. Envoyé de m...

lectrapon

What device do you advise me to buy for making best hotspot roaming in 360° in 2.4Ghz like Metal 2 ?

I have found this product...RB912UAG-2HPnD

Is it a 360° wireless card ? or did I need to add antenna ?

lectrapon

I choose QRT2 because my MikroTik provider advised me after my misadventure with the well-known hardware issues of Metal 2SHpn. Yes, I have an standalone router on which my first QRT2 is connected. And the three others QRT2 would be outdoors relays. Because I don't want to install relay in home of u...

lectrapon

Hello, I need to install four (04) QRT2 in our residential house for roaming of outdoor users hotspot. I search how to set each device... Here is my first device setting (internet access) : # nov/20/2015 09:46:58 by RouterOS 6.32.3 # software id = QCC4-2T0S # /interface wireless set [ find default-n...

lectrapon

We need a French version of Manual because there are some technical section that can't be easy for us to understand.

lectrapon

What device with omni antenna can be used as equivalent of Metal 2SHPn considering TX power ?

Due to many Metal 2 SHPn issues

, I am searching other Mikrotik device.

lectrapon

And yes, ivory coast seems to be missing. Lectrapon, you should drop an email to support with request for it. ok...thanks! Does Ivory Coast have regulatory limitations? Setting country makes sense only if your country has some regulations for Wireless limits. I am not sure with 2.4GHz but I will as...

lectrapon

And yes, ivory coast seems to be missing. Lectrapon, you should drop an email to support with request for it.

ok...thanks!

lectrapon

I found my solution...www.tawk.to

lectrapon

Hello, I have found "phpfreechat-1.7". I have create an unsecured hotspot to insert Chat in the login page. I want to chat with new connected users since the coverage of wireless is good and each day i notice at least 10 differents users (MAC address) connected to it . Someone can help me ...

lectrapon

can anyone suggesting how to create webchat that login using mikrotik hotspot login & password, i think it's look like http://talk.mikrotik.com For the chat i can configure it using phpfreechat script, but i have difficulty on getting hotspot username & password as authentication. Hello, I ...

lectrapon

Hello,

I want to create a live chat (as support) for all clients in registration list.

Can anyone guide me ?

lectrapon

Yes, you can fill that value. You cannot damage the card by any setting as the antenna is connected. Rising the gain value lowers the transmitting power so no value means maximum power. Play with it and see what the opposite side will report as signal level...

OK i will try it...

lectrapon

Check the country list. Maybe English name of your country is used instead of French name.

unfortunately "Ivory Coast" (English name) is not listed.

lectrapon

You should read manual first. Thanks to reply Jarda . :D I have already read all wireless section http://wiki.mikrotik.com/wiki/Manual:Interface/Wireless where they said that "Antenna gain in dBi, used to calculate maximum transmit power according to country regulations." Unfortunately my...

lectrapon

Hi all, i have configured the wireless setting of my QRT G-2SHPnD as follow : 2015-08-03_15-33-58.png Below the export content of wireless setting : # aug/03/2015 16:00:27 by RouterOS 6.30.2 # software id = QCC4-2T0S # /interface wireless set [ find default-name=wlan1 ] ampdu-priorities=0,1,2,3,4,5...

lectrapon

Hi all, i have configured the wireless setting of my QRT G-2SHPnD as follow : 2015-08-03_15-33-58.png Below the export content of wireless setting : # aug/03/2015 16:00:27 by RouterOS 6.30.2 # software id = QCC4-2T0S # /interface wireless set [ find default-name=wlan1 ] ampdu-priorities=0,1,2,3,4,5,...

lectrapon

Here is my solution to give 30mn to unauthenticated hotspot user for login or free bandwidth: { :foreach i in ( [ /interface wireless registration-table find where uptime > 1800 ] ) do={ :local detail [ /interface wireless registration-table get $i comment ] :local mac [ /interface wireless registra...

lectrapon

Hi swissiws

Thanks for your help....

lectrapon

Hello, I need your help to write script for copying in access-list all hotspot clients which are waste time on server without login after connected more than 30 mn for disabling their "authentication" and "forwarding". I know that at first time I must to search in registration ta...

lectrapon

Good day, I have chose an QRT G-2SHPnD for replacement of my Metal 2SHPn...(I thank all people who helped me with Metal connections issues :wink: ) Right now I change default configuration of my QRT G-2SHPnD. Below my exported configuration : # jul/06/2015 07:45:24 by RouterOS 6.29.1 # software id =...

lectrapon

If you could give this device to distributor from who you have bought this unit ,he will test it, if its defective then send to RMA.

ok.

lectrapon

You already did the reset to no defaults? no difference?

Unfortunately...yes !

lectrapon

Only a hint about your config: "adaptive-noise-immunity=ap-and-client-mode" has no sense if the network is not 100% atheros chipset and it's enabled in everyone. That never will happens in 2.4 for clients. I have already tested with "adaptive-noise-immunity=none" ...but nothing ...

lectrapon

Also, can you check in System > routerboard the firmware version?

Have you ever powered the Groove with no antenna attached??

No, I haven't powered my Metal 2SHPn without antenna attached...according to instructions of my Mikrotik distributor and the forum support.

lectrapon

Do an export and save it to your PC.

then do a

System > Reset configuration, tick no-defaults, reboot.

Load the export and check.

ok

lectrapon

I'd bet it's a hardware issue, but just to rule out other possibilities (corrupt nvram), I'd - Save an export of all configuration. - Reset configuration, no-defaults - Load configuration test. - Save an export of all configuration - Netinstall the groove - Load configuration test. Bear in mind an ...

lectrapon

Only a hint about your config:

"adaptive-noise-immunity=ap-and-client-mode"

has no sense if the network is not 100% atheros chipset and it's enabled in everyone. That never will happens in 2.4 for clients.

So I have to disable it (adaptive-noise-immunity=none) ?

lectrapon

Something should be wrong, can't believe nothing appears in an spectral-history, you seem to have a "deaf" radio. Please enable Wireless debug (System > logging, add another rule with topic wireless action memory). Reboot and post the log... Do you have another antenna, just for testing? ...

lectrapon

Also, can you check in System > routerboard the firmware version?

firmware version is 3.22

lectrapon

I had the same issue 2 times.

Change the POE.

Regards.

Hello pacoss,

I must wait tomorrow to buy another PoE and I will make you feedback...because today is holyday.

...thanks for your help!

lectrapon

Check if the issue persists with another antenna, also inspect both N connectors. That could happen if the antenna doesn't have a secure connection. Also do what jarda pointed, do an spectral scan with interference=yes and a spectral-history and post them here... Hello pukkita , I will try your ins...

lectrapon

Hello Forum, Believe it or not, upgrading MikroTik to the latest version did a super magic thing, the issue didn't happen since the upgrade finished!! Hello Ammar83 I'm facing the same issue (indoor and outdoor) with Metal 2SHPn. Can you tell me how did you upgrade your Mikrotik (NetInstall, Winbox...

lectrapon

Hello Forum, Believe it or not, upgrading MikroTik to the latest version did a super magic thing, the issue didn't happen since the upgrade finished!! Hello Ammar83 I'm facing the same issue (indoor and outdoor) with Metal 2SHPn. Can you tell me how did you upgrade your Mikrotik (NetInstall, Winbox...

lectrapon

Hello, I have issue with registration in Wireless interface since I have upgrade from 6.27 to 6.28. :? So I decided to downgrade to 6.27. Unfortunately I noticed that Winbox couldn't find my RouterBoard and the power LED flashing. I have done Hard reset on device and I have always nothing in the LOG...

lectrapon

Hello, I need your help about my METAL 2SHPn with preinstalled system 5.26 (and firmware 3.22). I upgrade to 6.27 and I noticed that my wireless was not stable (connect and disconnect). After upgrade to 6.28, I noticed that the LOG menu can’t list something about DEBUG DHCP, HOTSPOT, WEB-PROXY when ...

lectrapon

Hello all

did they solved Metal 2sHPn issue ?

I want to buy 01 Metal 2 sHPn for Access Point installation in our residential city (I want to cover ~500 meters around AP)
is this possible with only one ?

Search found 80 matches