Community discussions

Search found 169 matches

by pietroscherer
Sun Oct 06, 2019 10:16 pm
Forum: Beginner Basics
Topic: Best way to distribute ip block
Replies: 2
Views: 877

Re: Best way to distribute ip block

You have a /29 wan prefix. For your setup, you need a LAN (routed) prefix to assign inside your network. However, you can assign another IP address of this block on the same wan port, and use NAT rules to forward the traffic to the client. https://wiki.mikrotik.com/wiki/Manual:IP/Firewall/NAT#Forwar...
by pietroscherer
Wed Sep 25, 2019 11:37 pm
Forum: Beginner Basics
Topic: VPN between two routers
Replies: 8
Views: 716

Re: VPN between two routers

Set RoMON on all devices for example .

+1 for RoMON!

https://wiki.mikrotik.com/wiki/Manual:Tools/RoMON

Or simply:

/tool romon set enabled=yes secrets=qwe123

on both routers.
by pietroscherer
Wed Sep 25, 2019 7:23 pm
Forum: Beginner Basics
Topic: CLI "Not Like" [SOLVED]
Replies: 4
Views: 392

Re: CLI "Not Like" [SOLVED]

It's not so simple :lol:

We used API to get rOS version
version.gif
by pietroscherer
Wed Sep 25, 2019 5:34 pm
Forum: Beginner Basics
Topic: CLI "Not Like" [SOLVED]
Replies: 4
Views: 392

Re: CLI "Not Like" [SOLVED]

Try this:
/ip neighbor print where version ~"^((!6.44.5).)*$"
by pietroscherer
Wed Sep 25, 2019 2:55 am
Forum: General
Topic: CRS326 Architecture
Replies: 1
Views: 235

Re: CRS326 Architecture

This CRS is Mipsbe, as you can check on website:

https://mikrotik.com/product/CRS326-24Splus2QplusRM

You can check it under ”/system resources” on your device as well.

And yes, I think it is a little bit confusing if you follow only the downloads page.
by pietroscherer
Mon Sep 23, 2019 3:18 am
Forum: General
Topic: can we do bonding in rb750r2 ?
Replies: 3
Views: 367

Re: can we do bonding in rb750r2 ?

Answering the topic question: Yes, you can. And how it will affect the CPU, depends on how much traffic you will be running on it, how many firewall rules it will have, etc. Bonding feature just aggregate two or more network interfaces in a virtual interface and it’s controlled by CPU. https://wiki....
by pietroscherer
Thu Sep 19, 2019 5:45 pm
Forum: General
Topic: Report "Delegated-IPv6-Prefix" attribute for PPPoE
Replies: 200
Views: 39517

Re: Report "Delegated-IPv6-Prefix" attribute for PPPoE

Anyone tested on 6.45.x ?
by pietroscherer
Wed Sep 18, 2019 10:10 pm
Forum: General
Topic: bgp monitoring on CCR1036-8G-2S+ [SOLVED]
Replies: 2
Views: 529

Re: bgp monitoring on CCR1036-8G-2S+ [SOLVED]

Currently, RouterOS doesn't have BGP info through SNMP. We are expecting anxiously for this feature.

By the way, if you are using Zabbix, you can find some ways to monitor you BGP sessions here:

https://share.zabbix.com

Thank you!
by pietroscherer
Wed Sep 18, 2019 2:38 pm
Forum: Beginner Basics
Topic: Problem with DNS [SOLVED]
Replies: 2
Views: 440

Re: Problem with DNS [SOLVED]

It seems you have a static DNS entry in your router.

Check It on:
/ip dns static print
by pietroscherer
Mon Sep 16, 2019 5:30 am
Forum: General
Topic: IP cloud DDNS doesn't work after upgrade RouterOS
Replies: 8
Views: 986

Re: IP cloud DDNS doesn't work after upgrade RouterOS

Hi pietroscherer, Thank you for your suggestion. I already sent support.rif. I haven't tried 6.45.6 yet, because I always use long-term channel. Are there difference of IP cloud between 6.44.5 and 6.45.6 ? hEX PoE and hEX S are running in our environment. 743 of 773 hEX PoE(960PGS) work fine. 30 do...
by pietroscherer
Mon Sep 16, 2019 3:03 am
Forum: General
Topic: IP cloud DDNS doesn't work after upgrade RouterOS
Replies: 8
Views: 986

Re: IP cloud DDNS doesn't work after upgrade RouterOS

Hey guys, I tested now on my RB951Ui-2nD and it's works fine. I'm running 6.45.6. Actually, I even disabled/enabled the service and I could see stop/start working again. I recommend you send an e-mail to support@mikrotik.com, with a supout.rif. https://wiki.mikrotik.com/wiki/MikroTik_Support#Support...
by pietroscherer
Sun Sep 15, 2019 6:30 am
Forum: General
Topic: IP cloud DDNS doesn't work after upgrade RouterOS
Replies: 8
Views: 986

Re: IP cloud DDNS doesn't work after upgrade RouterOS

Did you try disabling/enabling IP Cloud after upgrade?
 /ip cloud set ddns-enabled=no
 /ip cloud set ddns-enabled=yes
Force update can help you as well:
 /ip cloud force-update

* Look this topic:

viewtopic.php?f=2&t=135603&p=743056&hil ... ns#p667827
by pietroscherer
Wed Sep 11, 2019 4:22 am
Forum: Beginner Basics
Topic: Winbox do not show IPv6 neighbors
Replies: 1
Views: 358

Re: Winbox do not show IPv6 neighbors

Which OS are you running Winbox?
by pietroscherer
Sat Apr 06, 2019 7:08 pm
Forum: Beginner Basics
Topic: PPTP Client For VPN - Upload better than Download
Replies: 3
Views: 411

Re: PPTP Client For VPN - Upload better than Download

Try L2TP instead PPTP and see if there is any difference. L2TP should be faster, because it uses UDP.
by pietroscherer
Wed Apr 03, 2019 8:08 pm
Forum: General
Topic: Bug? ether speed=wrong? [SOLVED]
Replies: 4
Views: 406

Re: Bug? ether speed=wrong? [SOLVED]

I've got an hAP AC2 running 6.456 beta23. My ether1-out has a gigabit connection (confirmed by its performance, also visible in WebFIG if I click into it). But, in terminal it shows with "speed=100Mbps". Does this look like a bug? /interface ethernet print detail Flags: X - disabled, R - running, S...
by pietroscherer
Wed Apr 03, 2019 7:58 pm
Forum: General
Topic: Best (free?) network diagram tool
Replies: 3
Views: 438

Re: Best (free?) network diagram tool

+1 for draw.io

If I would run a lab in a live presentation, for example, I'd rather Eve-ng instead of GNS3.
by pietroscherer
Fri Jan 25, 2019 3:54 pm
Forum: Beginner Basics
Topic: I need help with VPN
Replies: 2
Views: 248

Re: I need help with VPN

Hello, Seems that you don't have routes to reach the network. I recommend you to use a /30 format on VPN configuration, like: Local Address: 192.168.254.1 Remote Address: 192.168.254.2 On "Matriz", create a route pointing the subnet of "Filial" (for example, 192.168.200.0/24), through the gateway "1...
by pietroscherer
Wed Dec 26, 2018 7:45 pm
Forum: General
Topic: Help choosing a router
Replies: 4
Views: 375

Re: Help choosing a router

Totally agree with those guys above, and if you need to compare two products:

https://mikrotik.com/products

And just to help you, if you want to hire a Consultant, MikroTik website helps you:

https://mikrotik.com/consultants/latinamerica/brazil
by pietroscherer
Wed Jul 11, 2018 2:16 pm
Forum: Announcements
Topic: Winbox v3.16 released!
Replies: 63
Views: 27668

Re: Winbox v3.16 released!

The problem with "Click Reconnect, then Winbox window disappears and after exactly 30 seconds automatically disconnect from device with Connection lost window appearing again" still persist (first time spotted in v3.14 https://forum.mikrotik.com/viewtopic.php?f=21&t=134940&start=50#p665710) The sam...
by pietroscherer
Fri Jul 06, 2018 8:05 pm
Forum: Beginner Basics
Topic: Mikrotik Monitoring with Zabbix
Replies: 4
Views: 2546

Re: Mikrotik Monitoring with Zabbix

Nice project! I'll starting to test soon :D
by pietroscherer
Fri Jul 06, 2018 4:47 pm
Forum: Beginner Basics
Topic: VPN PPTP
Replies: 5
Views: 756

Re: VPN PPTP

Hello,

Which network did you use for PPTP? In the tutorial, they used "192.168.99.10-192.168.99.200". If you used the same, you must accept it in your firewall input chain.

add action=accept chain=input comment="DNS udp PPTP" dst-port=53 protocol=udp src-address=192.168.99.0/24

Thank you!
by pietroscherer
Mon Jun 25, 2018 2:02 pm
Forum: Announcements
Topic: Tik App, MikroTik android utility ALPHA test
Replies: 425
Views: 144519

Re: Tik App, MikroTik android utility ALPHA test

any news about IOS version?
+1 :D
by pietroscherer
Fri Jun 22, 2018 7:10 pm
Forum: Beginner Basics
Topic: filter in cli ?!?
Replies: 8
Views: 808

Re: filter in cli ?!?

Hello, You can use print, to show a filtered result, for example: /queue simple print where name=kevin and target=10.10.10.100/32 The command above will show all queues with name=kevin and target=10.10.10.100/32. The argument "where" will filter based on fields that you choose in the rest of the co...
by pietroscherer
Thu Jun 21, 2018 8:20 pm
Forum: Beginner Basics
Topic: filter in cli ?!?
Replies: 8
Views: 808

Re: filter in cli ?!?

Hello, You can use print, to show a filtered result, for example: /queue simple print where name=kevin and target=10.10.10.100/32 The command above will show all queues with name=kevin and target=10.10.10.100/32. The argument "where" will filter based on fields that you choose in the rest of the com...
by pietroscherer
Wed Apr 18, 2018 2:52 pm
Forum: Announcements
Topic: v6.42 [current]
Replies: 147
Views: 28133

Re: v6.42 [current]

Running fine on a RB941-2nD (hAP-lite) as SOHO (L2TP + IPSec). :D
by pietroscherer
Wed Apr 11, 2018 1:19 pm
Forum: Beginner Basics
Topic: Batch set all LEDs [SOLVED]
Replies: 2
Views: 459

Re: Batch set all LEDs [SOLVED]

I think that you're trying to disable all leds with one command, and if yes, you can use:
/system leds disable [find]

Thank you!
by pietroscherer
Thu Mar 15, 2018 10:55 pm
Forum: General
Topic: Does Mikrotik use underlying Quagga for BGP?
Replies: 8
Views: 1463

Re: Does Mikrotik use underlying Quagga for BGP?

Prior to 4.x Mikrotik were using Quagga, but I believe the current BGP implementation was developed in-house. I would not be surprised if Mikrotik are using parts of Quagga with some additional in-house developed modules, the zserv API makes that easy.... I was talking about this with a friend, a f...
by pietroscherer
Thu Mar 15, 2018 4:20 pm
Forum: Beginner Basics
Topic: Help required: How to setup Mikrotik Cloud Router Switch: CRS226-24G+25+RM
Replies: 1
Views: 510

Re: Help required: How to setup Mikrotik Cloud Router Switch: CRS226-24G+25+RM

Hello, For Vlans: https://wiki.mikrotik.com/wiki/Manual:CRS_examples Basic Firewall Script: https://wiki.mikrotik.com/wiki/Basic_universal_firewall_script VDSL: https://wiki.mikrotik.com/wiki/How_to_Connect_your_Home_Network_to_xDSL_Line DHCP (Server I guess): https://wiki.mikrotik.com/wiki/Manual:I...
by pietroscherer
Sat Mar 03, 2018 3:45 am
Forum: General
Topic: CRS326 and bonding [SOLVED]
Replies: 12
Views: 1774

Re: CRS326 and bonding [SOLVED]

Did you tried to add the bonding interface to bridge, instead of ethernet interface, right? In the wiki link, ether1 and ether2 are inside bonding, and bonding goes inside the bridge. Add the bonding interface to the bridge is not the problem. But until the ether interfaces are not be able to add, ...
by pietroscherer
Sat Mar 03, 2018 1:03 am
Forum: General
Topic: CRS326 and bonding [SOLVED]
Replies: 12
Views: 1774

Re: CRS326 and bonding [SOLVED]

Did you tried to add the bonding interface to bridge, instead of ethernet interface, right?

In the wiki link, ether1 and ether2 are inside bonding, and bonding goes inside the bridge.


Sent from my iPhone using Tapatalk
by pietroscherer
Fri Mar 02, 2018 9:13 pm
Forum: Beginner Basics
Topic: Creating VLAN on CRS326
Replies: 12
Views: 1989

Re: Creating VLAN on CRS326

This is the best manual for vlans in RouterOS, in my opinion:

https://wiki.mikrotik.com/wiki/Manual:CRS_examples
by pietroscherer
Wed Feb 28, 2018 3:04 pm
Forum: General
Topic: New router OS
Replies: 46
Views: 12278

Re: New router OS

Some people wait for v7 only, and not for the features, or more specifically for new routing engine.
Sometimes I think that if new routing engine will be implemented in v6, somebody will stills waiting for v7 because of the version number.
by pietroscherer
Sat Feb 24, 2018 5:57 pm
Forum: Announcements
Topic: v6.40.6 [bugfix] is released!
Replies: 58
Views: 15390

Re: v6.40.6 [bugfix] is released!

pietroscherer - Glad to hear that you resolved the problem. As far as I understand, you can not tell if problem was caused by this particular release. Is that correct? Strods, It's Hard to say if was a problem caused by this particular release. OSPFv3 neighbors are running oldest versions than this...
by pietroscherer
Fri Feb 23, 2018 3:06 pm
Forum: Announcements
Topic: v6.40.6 [bugfix] is released!
Replies: 58
Views: 15390

Re: v6.40.6 [bugfix] is released!

pietroscherer - Does problem go away if you downgrade router to 6.40.5 version and appears once more if you upgrade back to 6.40.6? Hello Strods, I didn't do this test yet. One of the neighbors that wasn't working, becomes to work after update (6.23 -> 6.41.2). The other one still non working (no u...
by pietroscherer
Fri Feb 23, 2018 2:41 pm
Forum: Announcements
Topic: v6.40.6 [bugfix] is released!
Replies: 58
Views: 15390

Re: v6.40.6 [bugfix] is released!

pietroscherer - Does problem go away if you downgrade router to 6.40.5 version and appears once more if you upgrade back to 6.40.6? Hello Strods, I didn't do this test yet. One of the neighbors that wasn't working, becomes to work after update (6.23 -> 6.41.2). The other one still non working (no u...
by pietroscherer
Fri Feb 23, 2018 1:58 pm
Forum: Announcements
Topic: v6.40.6 [bugfix] is released!
Replies: 58
Views: 15390

Re: v6.40.6 [bugfix] is released!

Hello guys, Did you got problems with OSPFv3 on this version? After update a RB1100AHx2, some OSPFv3 neighbors doesn't reach the full state. Neighbors that are running is because I disabled / enable OSPFv3 interface. I've done the same with all neighbors, but some doesn't worked. https://i.imgur.com...
by pietroscherer
Fri Feb 16, 2018 12:49 pm
Forum: General
Topic: Winbox OUI identify
Replies: 30
Views: 3813

Re: Winbox OUI identify

Interesting. +1
by pietroscherer
Thu Feb 08, 2018 7:40 pm
Forum: Beginner Basics
Topic: Access my External published Ip Internally
Replies: 6
Views: 583

Re: Access my External published Ip Internally

I have a video which should explain what you need. You need hairpin NAT bit your port forwards need to be done in a specific way;
https://youtu.be/_kw_bQyX-3U
Very nice! :D
by pietroscherer
Thu Feb 08, 2018 7:37 pm
Forum: Beginner Basics
Topic: Access my External published Ip Internally
Replies: 6
Views: 583

Re: Access my External published Ip Internally

Ah ok, I'm sorry! Hairpin NAT is here if you want to read more about it: https://wiki.mikrotik.com/wiki/Hairpin_NAT To your example, you can use: /ip firewall nat add chain=srcnat src-address=198.168.0.0/24 dst-address=198.168.0.50 protocol=tcp dst-port=88 out-interface=LAN action=masquerade Change ...
by pietroscherer
Thu Feb 08, 2018 7:01 pm
Forum: Beginner Basics
Topic: Access my External published Ip Internally
Replies: 6
Views: 583

Re: Access my External published Ip Internally

I think that you need Port Forwarding:

https://wiki.mikrotik.com/wiki/Manual:I ... nation_NAT

Being more specific:
/ip firewall nat add action=dst-nat chain=dstnat dst-address=247.250.211.96 dst-port=88 protocol=tcp to-addresses=198.168.0.50 to-ports=88
Hope I can help you!
by pietroscherer
Thu Feb 08, 2018 1:48 pm
Forum: Announcements
Topic: v6.42rc [release candidate] is released!
Replies: 538
Views: 97329

Re: v6.42rc [release candidate] is released!

nstreme-plus ? What is it ? ;)
+ 32984920 :lol:
by pietroscherer
Thu Feb 01, 2018 8:25 pm
Forum: General
Topic: Reset CRS then Load Script
Replies: 4
Views: 578

Re: Reset CRS then Load Script

Yes. Look for the run-after-reset parameter, of /system reset-configuration command:

https://wiki.mikrotik.com/wiki/Manual:C ... tion_Reset

Hope I can help you!
by pietroscherer
Thu Feb 01, 2018 7:16 pm
Forum: Announcements
Topic: Winbox 3.12 released!
Replies: 55
Views: 43907

Re: Winbox 3.12 released!

It's a lot slower to open compared to 3.11. 3.11 is virtually instantaneous. 3.12 takes about 1.5 seconds. Connecting to a router with 3.11 takes about 0.25 seconds. With 3.12 it takes about 0.75 seconds. Edit: 5 minutes later, and having done nothing, it is now working properly, so I expect it was...
by pietroscherer
Wed Jan 31, 2018 3:39 pm
Forum: Announcements
Topic: MikroTik News February 2018 (Issue #80)
Replies: 65
Views: 17085

Re: MikroTik News February 2018 (Issue #80)

Hello,

Static link aggregation on CRS112-8P-4S-IN refers to non switch mode, correct?

Thank you.
by pietroscherer
Tue Jan 30, 2018 6:07 pm
Forum: Beginner Basics
Topic: WinBox under VirtualBox
Replies: 2
Views: 366

Re: WinBox under VirtualBox

Hello,

The network interface of Virtualbox is in bridge mode?

I use Winbox on my macOS using CrossOver https://www.codeweavers.com/products/crossover-mac, but you can use Wine to run Winbox too.
by pietroscherer
Thu Jan 18, 2018 7:29 pm
Forum: Beginner Basics
Topic: Help Securing Router
Replies: 1
Views: 1644

Re: Help Securing Router

No, they didn't gained access (yet, rsrs). It's a PPTP try or a scan on port 1723, but read Normis' post, where he tells about basic security: https://forum.mikrotik.com/viewtopic.php?f=21&t=129548 And here is link to Wiki, with a lot of examples to secure your router adding firewall rules and disab...
by pietroscherer
Sat Jan 06, 2018 8:29 pm
Forum: Beginner Basics
Topic: log the traffic
Replies: 1
Views: 351

Re: log the traffic

I think you can use a NAT rule: /ip firewall nat add chain=srcnat src-address=192.168.10.10 action=log log-prefix=tablet- /ip firewall nat add chain=srcnat src-address=192.168.10.11 action=log log-prefix=chromecast- Remember to change the src-address to your devices IPs. This rules needs to stay abo...
by pietroscherer
Sat Jan 06, 2018 8:13 pm
Forum: Beginner Basics
Topic: Webfig page customise
Replies: 3
Views: 608

Re: Webfig page customise

Can I customize webfig interface ?
Depends of what do you mean about "customize", but look for Skins:

https://wiki.mikrotik.com/wiki/Manual:Webfig#Skins

With Skins, you can make a lot of changes, making webfig more friendly, simple, etc.

Thank you!
by pietroscherer
Tue Dec 26, 2017 12:29 pm
Forum: The Dude
Topic: Colorful logs and logs regex in Dude v6 [SOLVED]
Replies: 4
Views: 1277

Re: Colorful logs and logs regex in Dude v6 [SOLVED]

The syslog feature was removed from dude. I would like to have it back with at least all previous features.
Thank you for this information, Jarda! We're expecting for this feature back again.

Not important messages was removed using "setting > polling" instead of regex.

Best regards,
by pietroscherer
Mon Dec 25, 2017 1:11 am
Forum: Announcements
Topic: v6.41 [current]
Replies: 304
Views: 77930

Re: v6.41 [current]

Unable to upgrade using "check for updates" menu, on my hAP-lite. I received a message of no enough space (7,2 MB was necessary and 7,2 was free).
Droping the main package to router worked without problems.

The hAP-lite seems to works fine for now.
by pietroscherer
Thu Dec 21, 2017 9:51 pm
Forum: The Dude
Topic: Colorful logs and logs regex in Dude v6 [SOLVED]
Replies: 4
Views: 1277

Colorful logs and logs regex in Dude v6 [SOLVED]

Hello all, It's possible to change the color of log messages? In Dude 3.6 was possible to see in green, messages for states OK, and in red, messages for states down. 2017-12-21 at 17.41.png And about Regex, I need to exclude of log messages, a line that contains the word "Unstable", because this mes...
by pietroscherer
Mon Nov 27, 2017 1:06 am
Forum: Beginner Basics
Topic: Understanding Bandwidth Test
Replies: 20
Views: 1204

Re: Understanding Bandwidth Test

/ip dns static add address=192.168.88.1 name=router.lan It's just an entry of default configuration. I think you can try to use less Tx Power in both sides, because 32 dBm is too much for 100 meters. After this, try to run a "Freq. Usage" on AP side, to choose a channel with less interference. Use ...
by pietroscherer
Sun Nov 26, 2017 2:20 am
Forum: Beginner Basics
Topic: Understanding Bandwidth Test
Replies: 20
Views: 1204

Re: Understanding Bandwidth Test

How are you doing the Speedtest between the Metals? What is the distance between them? And the Tx Power of each?
Did you performed a "Frequency Usage" to choose a channel without or with less interference?
by pietroscherer
Fri Nov 24, 2017 3:24 pm
Forum: Announcements
Topic: v6.41rc [release candidate] is released! New bridge implementation!
Replies: 561
Views: 123700

Re: v6.41rc [release candidate] is released! New bridge implementation!

*) firewall - added "tls-host" firewall matcher (CLI only);
Sweet. No more Layer 7 for HTTPS blocking :)
How it works? Which packet matches? Does it support wildcards?
+1 :D
by pietroscherer
Tue Nov 21, 2017 3:45 pm
Forum: Beginner Basics
Topic: CAPSMAN Config Assistance
Replies: 2
Views: 383

Re: CAPSMAN Config Assistance

Hello,

I was learning more about CAPsMAN and found this case study made by Uldis:

https://mum.mikrotik.com/presentations/BR14/Uldis.pdf

Hope this can help you!
by pietroscherer
Sun Nov 19, 2017 4:25 am
Forum: General
Topic: Can't restore backups on RB750Gr3
Replies: 17
Views: 1797

Re: Can't restore backups on RB750Gr3

Try the export (.rsc) file if you have it.
I generally use the .backup file just for the same hardware, and running the same version that backup was generate.
by pietroscherer
Tue Nov 14, 2017 6:29 pm
Forum: Beginner Basics
Topic: NAT doesn't work when IP ranges are specified
Replies: 16
Views: 1039

Re: NAT doesn't work when IP ranges are specified

I was always under the impression you can only forward the packets through NAT to 1 host. This seems to be backed up by it not allowing you to put in a range or subnet. Can't you give your individual devices different IP's then assign varying port numbers so you can access all of them? I thought th...
by pietroscherer
Tue Oct 31, 2017 2:20 pm
Forum: Announcements
Topic: MikroTik used by Amazon in their cloud datacenters
Replies: 34
Views: 18076

Re: MikroTik used by Amazon in their cloud datacenters

And it's not just one. We can see a many Routerboards in the Data Center.
Nice news!
by pietroscherer
Sun Oct 15, 2017 4:25 am
Forum: General
Topic: netwatch variable
Replies: 1
Views: 402

Re: netwatch variable

Could you please be more specific? What do you need to do?
by pietroscherer
Wed Oct 11, 2017 5:03 pm
Forum: Beginner Basics
Topic: why ipv4-fasttrack-active set to no ?
Replies: 9
Views: 1903

Re: why ipv4-fasttrack-active set to no ?

Yes. 8) CCR support conditions are met Does the position of the rule important ? (for me dummy=0, fasttrack=1) /ip firewall filter> print Flags: X - disabled, I - invalid, D - dynamic 0 D ;;; special dummy rule to show fasttrack counters chain=forward action=passthrough 1 chain=forward action=fastt...
by pietroscherer
Fri Oct 06, 2017 11:33 pm
Forum: Beginner Basics
Topic: Xbox One DMZ?
Replies: 7
Views: 1842

Re: Xbox One DMZ?

by pietroscherer
Fri Oct 06, 2017 3:21 pm
Forum: General
Topic: TR069 with FreeACS
Replies: 57
Views: 51760

Re: TR069 with FreeACS

For my ubuntu 17 it works, no idea about 16.04

Well then it should work on 16.04. I'll try it
Do share if it works for you.

Yup it worked. :D
Worked for me too, using Ubuntu 16.04.3. I installed the required Mysql version (5.6).
by pietroscherer
Fri Oct 06, 2017 3:15 pm
Forum: Beginner Basics
Topic: RouterOS_6.39.2_no_ntp_server_package
Replies: 1
Views: 373

Re: RouterOS_6.39.2_no_ntp_server_package

Did you tried https://mikrotik.com/download/archive, and download the "all-packages-[your-hardware-arch]"?
You'll find the ntp package, that contais server and client.

Regards,
by pietroscherer
Sun Sep 17, 2017 5:54 am
Forum: Beginner Basics
Topic: New To Mikrotik Need Links.
Replies: 2
Views: 446

Re: New To Mikrotik Need Links.

I didn't know. Very good!
by pietroscherer
Thu Sep 14, 2017 5:21 pm
Forum: Beginner Basics
Topic: hAP lite - noise while speedtest
Replies: 2
Views: 448

Re: hAP lite - noise while speedtest

Strange.. I have a hAP lite for more than a year, and works well and "quietly".
If you make a support.rif, this noise occur? If not, maybe it's become from the wlan.
by pietroscherer
Tue Sep 12, 2017 3:14 pm
Forum: Beginner Basics
Topic: Bridge and Router together, how?
Replies: 12
Views: 1718

Re: Bridge and Router together, how?

Sorry for the delay, last week was hectic. I found some time today and tried the configuration again. By default Mikrotik chooses Etherenet2 as master when I was working with wizards so I tried Ethernet2 instead of Ethernet1 as the master in config process and wallah, it's working. I'm not sure wha...
by pietroscherer
Tue Sep 05, 2017 3:03 pm
Forum: Beginner Basics
Topic: Winbox + IPv6 + macOS + CrossOver
Replies: 4
Views: 592

Re: Winbox + IPv6 + macOS + CrossOver

It's possible Crossover isn't compiled with IPv6 support.
Thinking on this way too. However, I mailed CrossOver Team asking an info.

Thanks! :)
by pietroscherer
Mon Sep 04, 2017 9:37 pm
Forum: Beginner Basics
Topic: Winbox + IPv6 + macOS + CrossOver
Replies: 4
Views: 592

Re: Winbox + IPv6 + macOS + CrossOver

Thanks for your feedback. I'll try another solution.
by pietroscherer
Mon Sep 04, 2017 4:43 am
Forum: Beginner Basics
Topic: Winbox + IPv6 + macOS + CrossOver
Replies: 4
Views: 592

Winbox + IPv6 + macOS + CrossOver

Hello,

Anybody using CrossOver to run Winbox on macOS Sierra? (If not, how are you use Winbox?)

I can't see IPv6 address of my router in Winbox neighbor table. IPv4 is ok.

Thanks a lot.
by pietroscherer
Mon Sep 04, 2017 4:29 am
Forum: General
Topic: Route Reflector
Replies: 2
Views: 856

Re: Route Reflector

Hi, Can someone show me or give an example of how to make a reflector router using mk x86? Or would you rather have some video material on that subject?
Hello,

Wiki has this article:

https://wiki.mikrotik.com/wiki/Manual:B ... _Reflector

Hope I can help you!
by pietroscherer
Mon Sep 04, 2017 4:24 am
Forum: Beginner Basics
Topic: Bridge and Router together, how?
Replies: 12
Views: 1718

Re: Bridge and Router together, how?

Start with blank config. Switch all ethernet ports (set master-port=ether1 for all except ether1). Create a bridge and add ether1 and wlan1 as its ports. Configure wlan1 as you want (set SSID, password, ...). And this is all what's needed for transparent AP for employees. Add an IP address for mana...
by pietroscherer
Fri Sep 01, 2017 7:39 pm
Forum: Beginner Basics
Topic: Bridge and Router together, how?
Replies: 12
Views: 1718

Re: Bridge and Router together, how?

Use firewall rules to your guest network.
by pietroscherer
Fri Sep 01, 2017 3:59 pm
Forum: General
Topic: Feature request: Web based speed test server
Replies: 5
Views: 1232

Re: Feature request: Web based speed test server

http://openspeedtest.com/speed-testing- ... ebsite.php
I've deployed this years ago. You can now use ARM board to do this in a very low cost.
Interesting!
by pietroscherer
Thu Aug 24, 2017 4:40 pm
Forum: Virtualization
Topic: CHR suggestions for new functionality
Replies: 157
Views: 32411

Re: CHR suggestions for new functionality

How about a small web server? Only to host some warning/blocking/sponsor pages.
by pietroscherer
Sat Aug 05, 2017 1:07 am
Forum: Announcements
Topic: Wireless link calculator updated
Replies: 67
Views: 31673

Re: Wireless link calculator updated

Very nice!

Any plans to add an export button with the link info (like a report)?
What about add the information of coordinates of each side (azimuth)?

Thanks!
by pietroscherer
Thu Jul 20, 2017 5:50 pm
Forum: Wireless Networking
Topic: NV2 Sync
Replies: 5
Views: 1282

Re: NV2 Sync

+1 :)
by pietroscherer
Wed Jul 12, 2017 7:33 pm
Forum: Beginner Basics
Topic: IP leak from LAN to wan ?
Replies: 10
Views: 2008

Re: IP leak from LAN to wan ?

Is fast-path enabled? It could leak MAC addresses.
Could you tell more about this?

Thanks!
by pietroscherer
Fri Jun 09, 2017 11:10 pm
Forum: Beginner Basics
Topic: Any MT consultants and systems deisgners available
Replies: 2
Views: 451

Re: Any MT consultants and systems deisgners available

Another Tip: Try the Consultants page, in MikroTik web site:

https://mikrotik.com/consultants
by pietroscherer
Mon Jun 05, 2017 10:29 pm
Forum: Beginner Basics
Topic: Speed
Replies: 2
Views: 437

Re: Speed

Try using band N instead of band A.
by pietroscherer
Mon May 22, 2017 8:01 pm
Forum: General
Topic: port forwarding on pppoE connection
Replies: 2
Views: 2342

Re: port forwarding on pppoE connection

Hello, Port forwarding docs and examples can be found here: https://wiki.mikrotik.com/wiki/Manual:IP/Firewall/NAT#Port_forwarding_to_internal_FTP_server About access your MikroTik Router from Internet, it's possible if you have a public IP address. If not, you can ask your ISP for a port forwarding ...
by pietroscherer
Fri May 19, 2017 3:34 pm
Forum: Beginner Basics
Topic: ICMP Rate Limit
Replies: 3
Views: 1682

Re: ICMP Rate Limit

Thanks @mrz :)
by pietroscherer
Fri May 19, 2017 2:59 pm
Forum: Beginner Basics
Topic: ICMP Rate Limit
Replies: 3
Views: 1682

Re: ICMP Rate Limit

Curious too. Anybody know?

https://wiki.mikrotik.com/wiki/Manual:IP/Settings

In Wiki, we have no description :(
by pietroscherer
Thu May 18, 2017 4:26 pm
Forum: General
Topic: Feature Req Winbox
Replies: 3
Views: 568

Re: Feature Req Winbox

Crossover can be an anternative too:

https://www.codeweavers.com/products/crossover-linux
by pietroscherer
Tue May 16, 2017 3:18 pm
Forum: General
Topic: Frequency
Replies: 4
Views: 1082

Re: Frequency

Hello @nichky, Does it mean something around 26xx. Im right? Yes, but remember that you're using superchannel. In this case, some devices will maybe not work with some channels because their compatibility. And also on what is the command to specify frequency on range? ranges [2412; 2577] i was tryin...
by pietroscherer
Mon May 15, 2017 11:34 pm
Forum: General
Topic: RAW
Replies: 5
Views: 639

Re: RAW

My curiosity is why can't you order them? I think what pietroscherer is trying to say, is in the RAW tab, on the very left if you notice that your numbers are not in order (1...2...3...4... etc) then you will not be able to move the rules around since they are not in order. If you click on the "#" ...
by pietroscherer
Mon May 15, 2017 10:13 pm
Forum: General
Topic: RAW
Replies: 5
Views: 639

Re: RAW

Make sure that your rules are already ordered. If not, you're no able to move the rules.

Click on "#" to ordering your rules.
raw.PNG
by pietroscherer
Mon May 15, 2017 3:19 am
Forum: General
Topic: Frequency
Replies: 4
Views: 1082

Re: Frequency

Try using the wireless tools, to find good channel to use:

https://wiki.mikrotik.com/wiki/Manual:Spectral_scan

https://wiki.mikrotik.com/wiki/Manual:I ... ss#Snooper


Sent from my iPhone using Tapatalk
by pietroscherer
Sun May 14, 2017 1:21 am
Forum: General
Topic: IPV6 and RouterOs CHR, error
Replies: 5
Views: 629

Re: IPV6 and RouterOs CHR, error

What OS are you using? I had the same experience with Windows7. On Linux it's ok for me.
by pietroscherer
Fri May 12, 2017 8:25 pm
Forum: General
Topic: Feature Request: IPerf
Replies: 50
Views: 11016

Re: Feature Request: IPerf

+1 for iPerf compatibility :D
by pietroscherer
Tue May 09, 2017 11:28 pm
Forum: General
Topic: Is it possible to externally authenticate hotspot users using freeradius?
Replies: 3
Views: 512

Re: Is it possible to externally authenticate hotspot users using freeradius?

Try tunneling the traffic to Radius Server over a L2TP + IPSec.
by pietroscherer
Tue May 09, 2017 8:52 pm
Forum: General
Topic: help please
Replies: 1
Views: 335

Re: help please

Dude server is not availble for RB2011.

https://wiki.mikrotik.com/wiki/Manual:T ... er_package
by pietroscherer
Tue May 09, 2017 4:28 pm
Forum: Beginner Basics
Topic: Performance of router running hotspot
Replies: 5
Views: 748

Re: Performance of router running hotspot

Specify limits for a good performance is not possible once that you have many other things running in a router. You can have firewall rules using part o CPU, and then your limit of Hotspot users can be lowest. Otherwise, how much bandwidth each Hotspot will have? The performance will be different in...
by pietroscherer
Tue May 09, 2017 3:39 pm
Forum: Beginner Basics
Topic: How to Access Mikrotik Router Configured with Private IP Address in WAN via Internet
Replies: 18
Views: 5103

Re: How to Access Mikrotik Router Configured with Private IP Address in WAN via Internet

Public IP address is mandatory for this. Alternatively, you can solicit to your ISP, a port forwarding from a public IP of ISP, to yout private IP.
by pietroscherer
Tue May 02, 2017 10:26 pm
Forum: General
Topic: Mark Conn and Packet Issue - 6.38.5 and 6.39
Replies: 1
Views: 689

Re: Mark Conn and Packet Issue - 6.38.5 and 6.39

It seems that Fasttrack is enabled in your router.
Could you paste the following output?
/ip firewall filter export
by pietroscherer
Tue May 02, 2017 2:09 am
Forum: Beginner Basics
Topic: posting procedure
Replies: 2
Views: 353

Re: posting procedure

Please help me how to post in forum site ?
Some tips:

viewtopic.php?f=3&t=45259
by pietroscherer
Fri Apr 28, 2017 11:06 pm
Forum: Beginner Basics
Topic: Mikrotik and VPN
Replies: 2
Views: 521

Re: Mikrotik and VPN

About the VPN, the following link will help you to choose what service do you need:

https://wiki.mikrotik.com/wiki/Category:VPN

.
by pietroscherer
Fri Apr 28, 2017 2:42 pm
Forum: Beginner Basics
Topic: presentation need it
Replies: 3
Views: 479

Re: presentation need it

Here you can find the presentation slides and the video.

https://mum.mikrotik.com/2017/EU/agenda/en
by pietroscherer
Thu Apr 27, 2017 5:47 pm
Forum: General
Topic: RB1100AHx2 unable to update!
Replies: 5
Views: 811

Re: RB1100AHx2 unable to update!

I think that you should try Netinstall in this case.

https://wiki.mikrotik.com/wiki/Manual:Netinstall
by pietroscherer
Thu Apr 27, 2017 2:45 pm
Forum: General
Topic: RB1100AHx2 unable to update!
Replies: 5
Views: 811

Re: RB1100AHx2 unable to update!

Tell us what did you try for upgrading RouterOS.

Try the Wiki guide:

https://wiki.mikrotik.com/wiki/Manual:U ... g_RouterOS
by pietroscherer
Thu Apr 27, 2017 12:10 am
Forum: Beginner Basics
Topic: IP address management
Replies: 1
Views: 681

IP address management

Dear all,

Creating this topic to share this tool:

https://phpipam.net/

This IPAM supports IPv4 and IPv6, separate by sections, and many other useful things.

I hope that helps you organize your IP address documentations.

Thank You.
by pietroscherer
Wed Apr 26, 2017 10:41 pm
Forum: General
Topic: Wireless Modulation OID for Zabbix
Replies: 2
Views: 516

Re: Wireless Modulation OID for Zabbix

Same result here, using hAP lite. Tested on 6.38.5 and 6.39rc80. E-mail to support@mikrotik.com, please. Hello Tomasi, Correcting the post.. to get the values of Tx and Rx Rates, you need to lookup in Registration Table. /interface wireless registration-table print oid And use the Tx and/or Rx Rate...
by pietroscherer
Wed Apr 19, 2017 8:08 pm
Forum: General
Topic: suggestion pppoe server
Replies: 2
Views: 391

Re: suggestion pppoe server

I prefer a decentralized environment with multiple PPPoE servers. Maintance windows and some possible failure will affect a specific region, and not all clients.
by pietroscherer
Fri Apr 07, 2017 4:47 pm
Forum: Beginner Basics
Topic: Hello all
Replies: 4
Views: 627

Re: Hello all

Hey, thanks for the warm welcome and a wise piece of advice. I ll definitely try to be a useful member here for everyone.
This can help you too:

viewtopic.php?f=3&t=45259
by pietroscherer
Tue Apr 04, 2017 12:24 am
Forum: Announcements
Topic: The Dude, v6.39rc test builds.
Replies: 121
Views: 28562

Re: The Dude, v6.39rc test builds.

Does anyone having a problem with "find tool" (Ctrl + F)?
At 6.38.5 is not possible to search using IP Address (nothing is found), only by device names.
In partial change logs, nothing about this was said yet.
by pietroscherer
Fri Mar 31, 2017 3:22 pm
Forum: General
Topic: Maintenance Level
Replies: 2
Views: 441

Re: Maintenance Level

by pietroscherer
Thu Mar 30, 2017 5:36 pm
Forum: Announcements
Topic: MUM Europe 2017 Live!
Replies: 64
Views: 12533

Re: MUM Europe 2017 Live!

Nice to see an upgrade to RB1100. I thought it was dead.
Looking forward to seeing the CRS317, too :D
by pietroscherer
Mon Mar 27, 2017 6:41 pm
Forum: General
Topic: SNMP Over Internet
Replies: 14
Views: 2726

Re: SNMP Over Internet

My suggestion:

Try using a SNMP Tool (example: PRTG SNMP), running locally (Windows machine directly connected into the router). If SNMP responses are ok, RouterOS is ok. Then, you can run the same tool into your remote PRTG Server.
by pietroscherer
Mon Mar 27, 2017 4:08 pm
Forum: General
Topic: SNMP Over Internet
Replies: 14
Views: 2726

Re: SNMP Over Internet

Your router seems to receiving SNMP packets..
Some applications can use SNMP over TCP. Accept too the TCP rule for ports 161 and 162.

* Note that don't specify the src-address os these rules can be dangerous, once that SNMP can be used for DDoS attack amplification.
by pietroscherer
Mon Mar 27, 2017 2:43 pm
Forum: General
Topic: BW test tool
Replies: 3
Views: 957

Re: BW test tool

Try Traffic Generator:

https://wiki.mikrotik.com/wiki/Manual:T ... _Generator

Bandwidth Test uses only one CPU of the router, according Mikrotik Team.
by pietroscherer
Mon Mar 27, 2017 4:19 am
Forum: General
Topic: SNMP Over Internet
Replies: 14
Views: 2726

Re: SNMP Over Internet

SNMP is answered locally? Can you see the accept rules in input chain, counting packtes?
by pietroscherer
Mon Mar 27, 2017 4:11 am
Forum: General
Topic: SNMP Over Internet
Replies: 14
Views: 2726

Re: SNMP Over Internet

Make sure that your accept rules for SNMP protocol is above the drop rule of input chain (if exists).
Make sure too, if your ISP allow SNMP through it.
by pietroscherer
Fri Mar 24, 2017 2:13 pm
Forum: General
Topic: Tool to convert CIDR list to address list
Replies: 1
Views: 522

Re: Tool to convert CIDR list to address list

Very useful :D
by pietroscherer
Thu Mar 23, 2017 3:40 pm
Forum: General
Topic: Port forwarding on pppoe client did not work
Replies: 8
Views: 1574

Re: Port forwarding on pppoe client did not work

Ok, I hope that helps you. Please, consider ZeroByte's post too. He told about have about another outgoing interface.
by pietroscherer
Wed Mar 22, 2017 8:38 pm
Forum: General
Topic: Port forwarding on pppoe client did not work
Replies: 8
Views: 1574

Re: Port forwarding on pppoe client did not work

Try to hide the option "fragment=no" in extra tab of dst-address rule.
You can try disabling the mangle rule of ether3 too, for test:
add action=mark-routing chain=prerouting in-interface=ether3 new-routing-mark=G_NET
by pietroscherer
Wed Mar 22, 2017 4:02 pm
Forum: General
Topic: Port forwarding on pppoe client did not work
Replies: 8
Views: 1574

Re: Port forwarding on pppoe client did not work

Paste your router config here, please.
/export hide-sensitive
by pietroscherer
Sun Mar 19, 2017 6:07 pm
Forum: General
Topic: ICMP problem
Replies: 5
Views: 712

Re: ICMP problem

Try using rules in icmp chain of basic firewall script.

https://wiki.mikrotik.com/wiki/Basic_un ... all_script

Adjust the jump rule to input or forward, according of the issue.


Sent from my iPhone using Tapatalk
by pietroscherer
Fri Mar 17, 2017 11:25 pm
Forum: General
Topic: alarm port with Mikrotik
Replies: 12
Views: 1438

Re: alarm port with Mikrotik

hi, P.S. Also your 2nd rule add chain=input connection-state=established,related was it a typo when you post your config here, i mean is missing "action" parameter ? I would modify it to be add action=accept chain=input connection-state=established,related ( double click the rule, into Action tab o...
by pietroscherer
Fri Mar 17, 2017 1:57 pm
Forum: General
Topic: alarm port with Mikrotik
Replies: 12
Views: 1438

Re: alarm port with Mikrotik

Can you paste the configuration of your router here, with the rules that you used?
/export hide-sensitive
by pietroscherer
Tue Mar 14, 2017 2:16 pm
Forum: Beginner Basics
Topic: Should fasttrack be used without a specified interface?
Replies: 1
Views: 304

Re: Should fasttrack be used without a specified interface?

Following the Wiki, the initial configuration doesn't mention any interface, and "fasttrack" all lan traffic:

https://wiki.mikrotik.com/index.php?tit ... figuration

But, It can depends of each situation.
by pietroscherer
Thu Mar 09, 2017 2:25 pm
Forum: Announcements
Topic: Statement on Vault 7 document release
Replies: 92
Views: 45633

Re: Statement on Vault 7 document release

Normis,

Thank you for reply!
No. We clean the system as such, we do not speculate if a certain file came from this malware or from elsewhere.
This procedure will become a routine in every new release, to warranty that the system will be always free of any suspicious file?

Thank you again!
by pietroscherer
Wed Mar 08, 2017 1:20 am
Forum: Beginner Basics
Topic: get IP of connected users on the specific interface
Replies: 1
Views: 275

Re: get IP of connected users on the specific interface

Get the MAC of specifc IP address, and use the following command in a terminal:
/interface bridge host print where mac-address="XX:XX:XX:XX:XX:XX"
And replace the XX with the MAC address.
by pietroscherer
Mon Mar 06, 2017 4:14 pm
Forum: Beginner Basics
Topic: Bypass VPN for Netflix?
Replies: 15
Views: 6957

Re: Bypass VPN for Netflix?

I hope this can help:

https://ipinfo.io/AS2906#blocks
by pietroscherer
Fri Mar 03, 2017 9:16 pm
Forum: Announcements
Topic: v6.39rc [release candidate] is released
Replies: 391
Views: 82361

Re: v6.39rc [release candidate] is released

Somebody with performance problems on 6.39RC38? Neither updates it's possible to do :(
I think that netinstall is needed.

https://drive.google.com/file/d/0B1G8TB ... sp=sharing

* I'm using hap lite and system resources are ok. CPU at 2% and RAM at 50%.
by pietroscherer
Wed Mar 01, 2017 2:03 pm
Forum: Beginner Basics
Topic: Wireless connection after 6.39rc38 update of client down
Replies: 3
Views: 429

Re: Wireless connection after 6.39rc38 update of client down

In this case, downgrade RouterOS version to the last stable, and e-mail "support@mikrotik.com", reporting this problems in RC version.
by pietroscherer
Mon Feb 27, 2017 7:14 pm
Forum: Beginner Basics
Topic: Wireless connection after 6.39rc38 update of client down
Replies: 3
Views: 429

Re: Wireless connection after 6.39rc38 update of client down

Did you try reboot AP side? Unfortunately is that you can try on AP side, once that you only updated the system.

* Make sure that the station side is running properly, after update.
by pietroscherer
Wed Feb 22, 2017 11:16 pm
Forum: Beginner Basics
Topic: How to calculate number of max user sessions
Replies: 3
Views: 1605

Re: How to calculate number of max user sessions

I think that my question was a little bit obvious, but.. Considering that we're talking about PPPoE sessions, depends of some points: - How much traffic will be forwarded through the router? - How many firewall rules will be on it. - Connection tracking is enabled or not. hEX RB750Gr3 has 2 CPU, 880...
by pietroscherer
Wed Feb 22, 2017 10:58 pm
Forum: Beginner Basics
Topic: How to calculate number of max user sessions
Replies: 3
Views: 1605

Re: How to calculate number of max user sessions

Are you talking about customers using PPPoE, or users that can manage the router?
by pietroscherer
Wed Feb 01, 2017 12:57 pm
Forum: Beginner Basics
Topic: Does RB1100AHx2 Supports The Dude
Replies: 5
Views: 2320

Re: Does RB1100AHx2 Supports The Dude

Partially such info you can get from Webproxy logs, but you need transparent proxy and remote syslog server.
So what syslog server would you recommend and can you give me the steps on how to configure it?
http://forum.mikrotik.com/viewtopic.php ... nk#p580750
by pietroscherer
Mon Jan 30, 2017 3:45 pm
Forum: Beginner Basics
Topic: Export administrator's passowords
Replies: 2
Views: 2516

Re: Export administrator's passowords

Hi, I sthere a way to export administrator passwords in cleartext view ? If i use the export command no config for admin user data is exported right ? If i use the backup method to export my config can i view the user passwords somehow ? Thanks Hello, I sthere a way to export administrator password...
by pietroscherer
Mon Jan 30, 2017 3:04 pm
Forum: General
Topic: Using Splunk to analyse MikroTik logs
Replies: 98
Views: 16761

Re: Using Splunk to analyse MikroTik logs

Nice! :D
https://www.graylog.org/ is an alternative, if you need more than 500 MB of logs per day.
by pietroscherer
Fri Jan 20, 2017 6:09 pm
Forum: General
Topic: My iWinbox app is released! Manage your RouterOS devices on iPhone/iPad and SNMP monitoring
Replies: 35
Views: 12550

Re: My iWinbox app is released! Manage your RouterOS devices on iPhone/iPad and SNMP monitoring

It would be nice to have iCloud integration, to have the router list in more than on iDevice :D
by pietroscherer
Fri Jan 20, 2017 3:43 pm
Forum: Beginner Basics
Topic: First Time - RSTP how to configure
Replies: 3
Views: 967

Re: First Time - RSTP how to configure

Hello guys,  We have a scenario that is hard to implement this fail-over via OSPF because of many reasons, so, I'll ask a question about RSTP and before you start saying do via OSPF, I need to do via layer 2 (RSTP)  [ correct me if I am wrong ] We have this scenario and we want to make possible to ...
by pietroscherer
Fri Jan 13, 2017 4:10 pm
Forum: Announcements
Topic: Winbox 3.8 released!
Replies: 47
Views: 18182

Re: Winbox 3.8 released!

Winbox 3.8, RB750GL 6.39rc12 - can not change/set firewall NAT rule's dst-port, src-port by winbox. Fields are grayed out/disabled whatever I do. On existing NAT rules and new ones as well. Already reported to support@mikrotik.com did you specified a protocol?? I upgraded Winbox on 3 Win10 Home (up...
by pietroscherer
Mon Jan 02, 2017 7:02 pm
Forum: Announcements
Topic: v6.38 [current] is released!
Replies: 168
Views: 37199

Re: v6.38 [current] is released!

*) routerboot - show log message if router CPU/RAM is overclocked;

It's possible to have a info message, when the router's CPU/RAM is out of factory/default value?
by pietroscherer
Thu Dec 22, 2016 8:09 pm
Forum: Beginner Basics
Topic: RB750Gr3 OS V 6.37.3 Userman?
Replies: 2
Views: 2637

Re: RB750Gr3 OS V 6.37.3 Userman?

by pietroscherer
Mon Dec 19, 2016 3:33 pm
Forum: Announcements
Topic: MikroTik News December 2016 (Issue #74)
Replies: 94
Views: 22244

Re: MikroTik News December 2016 (Issue #74)

- new CRS317 with 16 x SFP+ ports, coming Q2/17 This completes CRS family :D Except for the 48 port versions and the GSP (PoE) versions providing power on more than 4 ports. I am tired of buying UBNT switches where Mikrotik is MIA. PoE is very important too. I think that is next feature for Mikroti...
by pietroscherer
Mon Dec 19, 2016 2:24 pm
Forum: Announcements
Topic: MikroTik News December 2016 (Issue #74)
Replies: 94
Views: 22244

Re: MikroTik News December 2016 (Issue #74)

- new CRS317 with 16 x SFP+ ports, coming Q2/17

This completes CRS family :D
by pietroscherer
Fri Dec 16, 2016 5:54 pm
Forum: Announcements
Topic: New features in Dude RC
Replies: 22
Views: 9765

Re: New features in Dude RC

Please post feedback on the new features added in the latest RouterOS v6 release candidate branch. Simply upgrade RouterOS to the RC branch. - Dude configuration interface in Winbox (Requires latest Winbox version 3.7) - Dude configuration interface in Webfig - Maps are viewable in web mode. - Now ...
by pietroscherer
Wed Dec 14, 2016 7:45 pm
Forum: General
Topic: Bypass NAT
Replies: 8
Views: 2121

Re: Bypass NAT

Hello, My router connects to internet and a Branch office LAN, I have static routes for the Branch office, but because of the NAT rule, it does not work, if i disable the NAT rule it works with branch office connectivity but internet does not, how can i bypass so connection between 172.0.1.0/24 and...
by pietroscherer
Wed Dec 14, 2016 7:37 pm
Forum: Beginner Basics
Topic: I can`t log in to the Mikrotik
Replies: 4
Views: 5929

Re: I can`t log in to the Mikrotik

Try logging through mac address, using winbox. If problem persists, check about some issues here http://forum.mikrotik.com/viewtopic.php?t=36156.

If you're using SO Windows, try run winbox as Administrator.
If you have Virtual Box, try disable the virtual interfaces.
by pietroscherer
Tue Dec 06, 2016 8:15 pm
Forum: General
Topic: RouterOS v7.0 beta1 - when?
Replies: 609
Views: 154934

Re: RouterOS v7.0 beta1 - when?

I received in my whatsapp :lol:
rOS7.png
by pietroscherer
Wed Nov 30, 2016 3:17 pm
Forum: General
Topic: Feature Request: BGP Multicore
Replies: 6
Views: 2896

Re: Feature Request: BGP Multicore

hey! any news about v7 release? ;)
still no. you'll notice that. forum will be drunk for about a week...
In rOS v7 release, a DDoS attack of "Its time for the party!" will exist. :D
by pietroscherer
Tue Oct 25, 2016 3:25 pm
Forum: Beginner Basics
Topic: PPPoe server gateway ip
Replies: 12
Views: 2146

Re: PPPoe server gateway ip

Hello, You're using NAT Masquerade without exceptions: /ip firewall nat add action=masquerade chain=srcnat out-interface=ether1 Try adding in this rule an specific src-address or a src-address-list, to masquerade more specifically: /ip firewall nat add action=masquerade src-address=10.x.x.0/24 chain...
by pietroscherer
Fri Oct 21, 2016 9:28 pm
Forum: Beginner Basics
Topic: trying to allow access to l2tp/ipsec server
Replies: 2
Views: 501

Re: trying to allow access to l2tp/ipsec server

running webfig v6.34.3 This is our first MikroTik router. we have a server sitting at 192.168.1.50 that has l2tp/ipsec setup on it to accept VPN connections. We have configured the NAT tab of firewall like this.... /ip firewall nat add action=dst-nat chain=dstnat in-interface=ether1 protocol=ipsec-...
by pietroscherer
Fri Oct 21, 2016 7:05 pm
Forum: Beginner Basics
Topic: Bandwidith limit per user (IP)
Replies: 4
Views: 681

Re: Bandwidith limit per user (IP)

Thank you guys! According to the wiki example. I tried to follow step 2: /queue type add name="PCQ_download" kind=pcq pcq-rate=64000 pcq-classifier=dst-address /queue type add name="PCQ_upload" kind=pcq pcq-rate=32000 pcq-classifier=src-address (Is working) But adding the simple queue throws the fo...
by pietroscherer
Fri Oct 21, 2016 2:21 pm
Forum: Beginner Basics
Topic: Bandwidith limit per user (IP)
Replies: 4
Views: 681

Re: Bandwidith limit per user (IP)

Hi, I want to limit every users bandwidth (DOWN 3Mbit/UP 256KB). How can I do this? Every user gets an IP from DHCP server. I tried to do this with PCQ, but I only achieved to limit the total bandwidth for an IP range. This is not what I am looking for :) What do I need? Thank you! Hello, MikroTik ...
by pietroscherer
Sat Oct 01, 2016 11:00 pm
Forum: Beginner Basics
Topic: The Dude on CHR only use 1 CPU Core ?
Replies: 1
Views: 662

Re: The Dude on CHR only use 1 CPU Core ?

the dude version 6.34 any body can confirm that the dude which installed on CHR only able to use 1 CPU although we've already assigned 4 CPUs to the VM ? [admin@deDudeVM] > system resource cpu print # CPU LOAD IRQ DISK 0 cpu0 1% 1% 0% 1 cpu1 0% 0% 0% 2 cpu2 100% 1% 0% 3 cpu3 0% 0% 0% thank you. Hel...
by pietroscherer
Fri Sep 30, 2016 11:11 pm
Forum: Announcements
Topic: We have a new homepage!
Replies: 29
Views: 5296

Re: We have a new homepage!

Excelent! :D
by pietroscherer
Thu Sep 29, 2016 2:22 pm
Forum: Beginner Basics
Topic: finde and where examples
Replies: 2
Views: 505

Re: finde and where examples

I'm playing with find and where but I'm missing something. #works /ip route print where dst-address="0.0.0.0/0" # don't work /ip route find where dst-address="0.0.0.0/0" /ip route find dst-address="0.0.0.0/0" Aim is to search for comments by using wildcards. Do I miss something? Hello, Use find com...
by pietroscherer
Sat Sep 24, 2016 2:34 pm
Forum: Announcements
Topic: v6.37 [current] is released!
Replies: 197
Views: 34910

Re: v6.37 [current] is released!

Hello, Testing Loop Protect feature, in CHR: /interface ethernet print detail Flags: X - disabled, R - running, S - slave 0 R name="ether1" default-name="ether1" mtu=1500 mac-address=00:AC:04:0E:53:00 orig-mac-address=00:AC:04:0E:53:00 mac-address=00:AC:04:0E:53:00 arp=enabled arp-timeout=auto loop...
by pietroscherer
Fri Sep 23, 2016 11:36 pm
Forum: Announcements
Topic: v6.37 [current] is released!
Replies: 197
Views: 34910

Re: v6.37 [current] is released!

Hello, Testing Loop Protect feature, in CHR: /interface ethernet print detail Flags: X - disabled, R - running, S - slave 0 R name="ether1" default-name="ether1" mtu=1500 mac-address=00:AC:04:0E:53:00 orig-mac-address=00:AC:04:0E:53:00 mac-address=00:AC:04:0E:53:00 arp=enabled arp-timeout=auto loop-...
by pietroscherer
Thu May 19, 2016 2:55 pm
Forum: Beginner Basics
Topic: Wan - Mikrotik - Wan
Replies: 2
Views: 620

Re: Wan - Mikrotik - Wan

Hi to all, I would like to know if it's possible to configure the Mikrotik as switch on the wan side. We have ONE public ip address and the idea is to put the MT on the WAN side and configure it as a switch and use some of the capabilities of the switch. We want to use RB2011iL-IN like this: PRIVAT...
by pietroscherer
Wed May 18, 2016 2:42 pm
Forum: Beginner Basics
Topic: "Actions" in NAT section
Replies: 2
Views: 514

Re: "Actions" in NAT section

Hi guys, I'm new in MicroTik RouterOS world. My question is about the meaning of all options in "Actions" menù in NAT section. I need to route my LAN (network 192.168.88.0/24) by ISP' public static IP (example . 1.1.1.1.), that I assigned to sfp interface. So what option I must use in NAT configura...
by pietroscherer
Thu Mar 24, 2016 1:56 pm
Forum: Announcements
Topic: v6.35rc [release candidate] is released, new wireless package!
Replies: 537
Views: 105750

Re: v6.35rc [release candidate] is released, new wireless package!

Version 6.35rc35 has been released. Changes since previous version: *) chr - fixed kernel crash when virtual ethernet was not connected to anything in Hyper-V; *) chr - implemented kernel crash saving to autosupout.rif (will utilize additional 24Mb of RAM); *) romon - fix romon discovery after of r...
by pietroscherer
Mon Mar 21, 2016 12:54 am
Forum: Beginner Basics
Topic: XW firmware of ubnt doesnt associate with sxt lite 5
Replies: 3
Views: 1365

Re: XW firmware of ubnt doesnt associate with sxt lite 5

Hi guys we need new software for rb sxt lite 5 to connect and work well in wds station with new ubnt xw firmware cuz old ubnt XM firmware was working well with sxt lite 5 but new XW firmware doesnt so plz help us cuz almost of 5.5 Ghz Access points in our region stores sell ubnt products and SXT 5....
by pietroscherer
Mon Dec 14, 2015 9:44 pm
Forum: Beginner Basics
Topic: STP Protocol
Replies: 9
Views: 1984

Re: STP Protocol

I have to run RSTP on all bridges (point-to-point) or at all mikrotikach (even end-customers providing internet)? how to set priorities? or can someone show an example? RSTP will avoid broadcast storms only where you have it enabled. To avoid loops in end-customers, you'll need to enable there too....
by pietroscherer
Mon Dec 14, 2015 8:46 pm
Forum: Beginner Basics
Topic: STP Protocol
Replies: 9
Views: 1984

Re: STP Protocol

I have to run RSTP on all bridges (point-to-point) or at all mikrotikach (even end-customers providing internet)? how to set priorities? or can someone show an example? RSTP will avoid broadcast storms only where you have it enabled. To avoid loops in end-customers, you'll need to enable there too....
by pietroscherer
Mon Dec 14, 2015 4:00 pm
Forum: Virtualization
Topic: Cloud Hosted Router
Replies: 583
Views: 188154

Re: Cloud Hosted Router

Hi, I'm having a issue with package IPv6. When I enable it in CHR 6.32 using Qemu, the router crashes. Somebody else with the same problem? Thanks. I'm getting this issue as well. Windows Server 2008 R2 CHR version 6.34rc19 GNS3 ver 1.3.11 Qemu ver 2.4.0 (included version) If I run the image in Qem...
by pietroscherer
Mon Dec 14, 2015 3:17 pm
Forum: Virtualization
Topic: Cloud Hosted Router
Replies: 583
Views: 188154

Re: Cloud Hosted Router

Hi, I'm having a issue with package IPv6. When I enable it in CHR 6.32 using Qemu, the router crashes. Somebody else with the same problem? Thanks. I'm getting this issue as well. Windows Server 2008 R2 CHR version 6.34rc19 GNS3 ver 1.3.11 Qemu ver 2.4.0 (included version) If I run the image in Qem...
by pietroscherer
Tue Dec 08, 2015 3:55 pm
Forum: Virtualization
Topic: Cloud Hosted Router
Replies: 583
Views: 188154

Re: Cloud Hosted Router

Hi,

I'm having a issue with package IPv6. When I enable it in CHR 6.32 using Qemu, the router crashes. Somebody else with the same problem?

Thanks.
by pietroscherer
Mon Dec 07, 2015 1:55 am
Forum: Beginner Basics
Topic: STP Protocol
Replies: 9
Views: 1984

STP Protocol

To enable redundancy for Layer 2, you have to activate rstp on all bridges, and choosing a root bridge, lowering the priority of the chosen router. Usually chooses the router with more redundant outputs. If you can not choose the root bridge, the router with the lowest MAC, will be chosen. Enviado d...
by pietroscherer
Sat Dec 05, 2015 2:44 am
Forum: The Dude
Topic: The Dude is back! v6.34rc test build released
Replies: 269
Views: 74329

The Dude is back! v6.34rc test build released

Very good!


Enviado do meu iPhone usando Tapatalk
by pietroscherer
Fri Dec 04, 2015 1:40 pm
Forum: Virtualization
Topic: Cloud Hosted Router
Replies: 583
Views: 188154

Re: Cloud Hosted Router

"switch" is about hardware functionality. This menu should be removed on CHR, I think It appears that the person is asking for us to add such "virtual switch", it is not there currently, because you are right, Switch is a hardware feature Normis and Pavel, you're right! Normis, It would be interest...
by pietroscherer
Wed Dec 02, 2015 7:16 pm
Forum: Virtualization
Topic: Cloud Hosted Router
Replies: 583
Views: 188154

Re: Cloud Hosted Router

Hello,

Is there a way to use switching functionality CHR ?
switch.JPG
Thanks!
by pietroscherer
Mon Aug 17, 2015 5:46 pm
Forum: Virtualization
Topic: Cloud Hosted Router
Replies: 583
Views: 188154

Re: Cloud Hosted Router

Hello, When I run the CHR-vm, I get the following error: Demo License expired! Please reinstall... And the CHR-vm goes down. Any fix? Thanks you have to make sure that your virtual machine management system exposes virtualization bit to the guest os. Hello Janisk, I updated my Vbox version to 5.2 a...
by pietroscherer
Mon Aug 03, 2015 7:54 pm
Forum: Virtualization
Topic: Cloud Hosted Router
Replies: 583
Views: 188154

Re: Cloud Hosted Router

Hello,

When I run the CHR-vm, I get the following error:

Demo License expired!
Please reinstall...

And the CHR-vm goes down. Any fix?

Thanks
by pietroscherer
Wed May 20, 2015 2:51 pm
Forum: Beginner Basics
Topic: EoIP overhead
Replies: 1
Views: 756

EoIP overhead

Hello everybody, Do you know how much is the overhead of EoIP? Mikrotik Wiki says: Note: EoIP tunnel adds at least 42 byte overhead (8byte GRE + 14 byte Ethernet + 20 byte IP) In MTCRE Training, the trainer said: The EoIP overhead is about 256 bytes, so, you will have problems to get more of 30 Mbps...