hi
i searched the forum before posting this , does Wireguard work on CHR trail license .

i have checked ipsec, OpenVPN, worked,
Wireguard not working. double checked my config, (working on my RB1100) , checked all firewall rules,

regards

Hi Thank you , It worked like a charm , i was not using the 0.0.0.0/0 in the allowed addresses, Thanks again Yes, this is how I use it with OSPF. I use it as site2site. The mikrotik side is behind NAT/dynamic IP (it has fiber with 4G failover). Note that you have to allow-address 0.0.0.0/0 if you d...

Hi i have searched most of the forums for this, couldn't find any solution so i am posting this. i want to use wireguard site to site with OSPF , i successfully created wireguard peers on all remote sites and connected to the central site , all traffic flows perfectly with static routes , I want rem...

Hi all i am back again here to post my results, The crazy problem , IPIP tunnel with Ipsec keeps loosing connectivity every 10 to hours, and the only way to bring back the IPIP tunnels back up is by rebooting the RB3011 router is still present dispite of all the suggestions and fixes suggested in th...

hi an insight about the load on the router, at Peak time of the usage, when all 20 Tunnels are up, the peak CPU usage was never more than 15%, i have fast-track enabled. As said i shall update the routers to Current Stable release and will post the results here. Side Note : TO test another scenario,...

Hi I am Running a network is 20 branches connected to a central office , all our routers are Mikrotik, the Central Office router is RB3011. Branch routers are a mix of multiple routers, but all Mikrotik. All routers updated to the Latest Long Term Release . The Central and Remote offices are connect...

Upgraded RB3011. Ipsec tunnels broken
RB750Gr3,. Ipsec tunnels broken ,

Reverted back to 42.6 , all ipsec tunnels back working well ,

Hi

I finally sloved this, first I inceased the Pptp mtu to 1500 and later the EOIP also to 1500,,, not sure which setting actually solved the problem,, but was working finally like charm, now i am able to send all my central office vlans to any of our connected remote offices.

Thanks
Rj

Hi

I was going thru the forums,, found your post... could you kindly let me know the procedure...i was strugling to achive this.

my setup is like this

remote office MT dials in to Head office MT via PPTP. The EOIP is configured over this PPTP VPN tunnel.

Thanks in advance

Rj

Hi I am new to MT, i was trying to understand how to send VLAN traffic over EOIP. I have the Router A with vlans 4 ,5 I have the Router B connected to A via PPTP VPN , thru which EOIP is connected , thru which i was able to reach the LAN on RouterA. So now I was wondering How to have two vlans trave...